onsemi

CD4024BCN - 7-Bit Ripple Binary Counter | onsemi

MPN: CD4024BCN ✓ 啟用中
3 V to 15 V Vdss 14-pin MDIP Package Negative edge Speed
MOQ: 1 |

CD4024BCN 概覽

The onsemi CD4024BCN is a CMOS 7-stage ripple-carry binary counter with buffered outputs, a negative-edge clock, and a master reset input in a 14-pin MDIP package. It operates from 3 V to 15 V and provides seven individually accessible count outputs for binary counting, frequency division, sequencing, and state-machine implementations. The counter advances on the negative transition of each clock pulse and is returned to logic zero by a logic-high reset input.

A binary counter is a sequential digital circuit that stores a count as a set of binary bits and advances that count when triggered. A ripple-carry counter implements the stages in sequence, so each stage clocks the following stage. The CD4024BCN belongs to the CD4000 CMOS logic family, combining counters into the broader category of logic ICs, clock and timing circuits, and digital semiconductors.

The principal features include seven counter stages, externally buffered outputs from stage 1 through stage 7, a negative-edge-triggered clock, and a direct master-reset function. Its 3 V to 15 V supply range permits operation from conventional 5 V logic systems through higher-voltage CMOS rails. Buffered stage outputs allow each count bit to be used without directly driving an additional counter stage through an external buffer.

CD4000-series CMOS devices use positive and negative supply rails, and the CD4024BCN includes a standard 14-pin DIP-style interface. Because the internal stages form a ripple chain, cumulative propagation delay across all seven stages can affect the time available for the final output to settle after a clock transition. Applications with high-frequency requirements must therefore account for both the counter operating frequency and the settling requirement of the particular output bit being sampled.

Typical uses include divide-by-2 through divide-by-128 clock generation, event counting, industrial timing, programmable sequencing, digital test equipment, and general-purpose logic control. The reset input allows the counter to establish a known starting state before counting begins. In a divide-by-N arrangement, one or more of the seven outputs can be combined so that the active-low transition of the selected bit establishes the repetition rate.

For reliable implementation, keep the clock source clean and respect the input and output timing limits stated in the manufacturer datasheet. Provide adequate bypassing across the supply pins, especially when the counter drives external control logic or long signal routes. Confirm reset release timing relative to the active clock edge so that reset noise or a slowly changing reset edge does not create an unintended count event.

This page combines functional interpretation, practical design guidance, pin-level implementation details, drop-in replacement analysis, and parameter-by-parameter comparison. It is designed to help engineers evaluate the CD4024BCN for legacy CMOS, industrial, educational, control, and timing applications without overlooking reset behavior, ripple delay, supply-voltage compatibility, or package-level replacement constraints.

直接替換替代品,適用於 CD4024BCN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: CD4024BCN (相同外形與佔位) — 差異在於 Logic Family, Supply Voltage Range.

Texas Instruments
Logic Family: CD4000-series CMOS
Supply Voltage Range: 3 V to 18 V
比較對象 CD4024BCN →

MC14024BCP

✅ 直接替換
📦 14-pin MDIP (DIP-14)
Same 7-stage ripple-counter function and 14-pin footprint; propagation timing and electrical limits may differ by up to 20%

📋 參考替代品(不在目錄中)

MC14024BCPG

✅ 直接替換
📦 14-pin MDIP (DIP-14)
Same 7-stage counter and pin arrangement as MC14024BCP; device grade and ordering suffix differ by up to 10% in operating limits

📋 參考替代品(不在目錄中)

CD4024BCN

✅ 直接替換
onsemi
📦 14-pin MDIP (DIP-14)
CMOS ripple-carry binary counter · onsemi · 7 stages · 7 bits · 7 outputs, stages 1 through 7 · Negative edge · Master reset to logic 0 · Logic 1

聯絡詢價

查看資料表 →

CD4024BE

✅ 直接替換
Texas Instruments
📦 14-pin MDIP (DIP-14)
7-stage ripple-carry binary counter/divider · 7 stages · 7 bits · 3 V to 18 V · Negative-edge triggered · High-level reset · CD4000-series CMOS · -55 °C to +125 °C

聯絡詢價

查看資料表 →

CD4024BE

✅ 直接替換
Texas Instruments
📦 14-pin MDIP (DIP-14)
7-stage ripple-carry binary counter/divider · 7 stages · 7 bits · 3 V to 18 V · Negative-edge triggered · High-level reset · CD4000-series CMOS · -55 °C to +125 °C

聯絡詢價

查看資料表 →

HEF4024B

✅ 直接替換
📦 14-pin MDIP (DIP-14)
Same 7-stage counter and DIP-14 interface; voltage range, timing, and output-current differences may reach 30%

📋 參考替代品(不在目錄中)

MC14024BCN

✅ 直接替換
📦 14-pin MDIP (DIP-14)
Same MC14024 7-stage ripple-counter function and 14-pin footprint; historical manufacturer limits and timing require direct comparison

📋 參考替代品(不在目錄中)

CD4024BCN 最大額定值與電氣特性

Product Type CMOS ripple-carry binary counter
Manufacturer onsemi
Number of Counter Stages 7 stages
Counter Resolution 7 bits
Number of Externally Accessible Outputs 7 outputs, stages 1 through 7
Clock Triggering Edge Negative edge
Reset Type Master reset to logic 0
Active Reset Level Logic 1
Supply Voltage Range 3 V to 15 V
Logic Family CD4000 CMOS
封裝 14-pin MDIP
安裝類型 Through-hole
腳位數 14 pins
Output Buffering Buffered outputs from stages 1 through 7
Logic Levels CMOS logic levels

CD4024BCN 腳位配置

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
腳位 1 CLK — Negative-edge-triggered clock input
腳位 2 MR — Master reset input; a logic 1 resets all stages to logic zero
腳位 3 Q0 — Buffered output from counter stage 1
腳位 4 Q1 — Buffered output from counter stage 2
腳位 5 Q2 — Buffered output from counter stage 3
腳位 6 Q3 — Buffered output from counter stage 4
腳位 7 VSS — Ground or negative supply reference
腳位 8 Q4 — Buffered output from counter stage 5
腳位 9 Q5 — Buffered output from counter stage 6
腳位 10 Q6 — Buffered output from counter stage 7
腳位 11 Q7 — Buffered output from the seventh counter stage
腳位 12 VDD — Positive supply input
腳位 13 NC — Not connected
腳位 14 NC — Not connected

典型應用

CD4024BCN 適用於 6 應用s: Binary Frequency Divider, Industrial Event Counter, Digital Sequencer, Timing and Delay Reference, Educational Logic Trainer, Legacy CMOS Control System.

⚡

Binary Frequency Divider

The CD4024BCN divides an input clock by powers of two by feeding a selected buffered counter output back to the clock input. Stage 1 produces a divide-by-2 signal, stage 3 provides divide-by-8 operation, and stage 7 can generate a divide-by-128 output. Because the device is a ripple counter, the feedback output must settle before the next triggering edge, so the maximum usable input frequency should include the cumulative propagation delay of the selected stages. The 3 V to 15 V operating range also allows the same divider topology to be used across multiple CMOS supply levels when the downstream receiver is compatible.

🏭

Industrial Event Counter

The seven buffered outputs of the CD4024BCN allow an industrial controller to observe a binary event count without decoding a multiplexed bus. A sensor, limit switch, or line-frequency signal can provide the negative clock transition, while the master-reset input establishes zero before a production cycle begins. The 3 V to 15 V supply range accommodates conventional control-logic rails, but the input must remain within the counter's specified voltage and timing limits. In a noisy factory environment, protect clock and reset traces, provide local supply bypassing, and avoid relying on a slow reset edge when an immediate and repeatable reset is required.

🖥️

Digital Sequencer

The CD4024BCN can function as a programmable sequence generator by combining one of its seven binary outputs with a next-state decoder. Each selected count value advances the system to the following state, making the counter suitable for stepper sequencing, test-pattern selection, and repetitive control cycles. The master reset returns the sequence to its starting point, while the buffered outputs provide separate signals for state decoding. Because the stages ripple internally, state-transition timing must include output settling before control logic acts. A system operating from 5 V can use the device directly when its input thresholds and output levels match the selected external logic family.

⏱️

Timing and Delay Reference

A clock source connected to the CD4024BCN can be divided down to create long timing intervals without requiring a large counter chain. Selecting an upper-stage output produces a proportionally longer interval and reduces the number of external components. This arrangement is useful in test equipment, instrumentation, timer boards, and periodic control systems. The relevant timing budget must account for the frequency tolerance of the source clock, the counter's maximum operating frequency, and the ripple propagation delay through the selected stage. Reset timing should also be synchronized when timing accuracy depends on a repeatable starting point.

🔧

Educational Logic Trainer

The CD4024BCN is suitable for educational circuits that demonstrate binary counting, ripple propagation, reset behavior, and state decoding. Its exposed 14-pin DIP package permits students to observe several counter stages on breadboards or socketed training boards. The negative-edge clock trigger should be explained clearly so that laboratory measurements relate each output transition to the preceding stage. A logic analyzer can display the Q0-through-Q7 relationship and reveal the delay between adjacent stages. Since the device uses a 3 V to 15 V range, the trainer must set the rails consistently and must not exceed the manufacturer's absolute maximum ratings.

🔧

Legacy CMOS Control System

CD4024BCN is useful when maintaining or reproducing equipment built around CD4000-series CMOS logic. Its seven-stage counter can retain binary count state, support event counting, or create divided timing signals without introducing a modern microcontroller into the original architecture. The 14-pin MDIP package preserves compatibility with existing through-hole boards and socketed repairs. For a reliable replacement, the engineer should verify supply-voltage range, reset polarity, clock edge, output levels, and maximum clock frequency against the original schematic and the manufacturer datasheet. Supply bypassing and unused-input handling are especially important when operating within older mixed-logic systems.

推薦產品摘要

MC14024BCP Same-family 7-stage ripple-divider alternative 用於: Binary Frequency Divider, Industrial Event Counter, Timing and Delay Reference, Educational Logic Trainer SN74LS93DR Texas Instruments 用於: Binary Frequency Divider, Educational Logic Trainer SN74LS90DR Texas Instruments 用於: Industrial Event Counter, Timing and Delay Reference CD4024BE Texas Instruments 用於: Digital Sequencer SN74LS85DR Texas Instruments 用於: Digital Sequencer CD4024BCN onsemi 用於: Legacy CMOS Control System HEF4024B CMOS family alternative for DIP-14 designs 用於: Legacy CMOS Control System
What is the CD4024BCN and what does it do?
The onsemi CD4024BCN is a CMOS 7-stage ripple-carry binary counter that advances on the negative transition of each clock pulse. According to the manufacturer datasheet, it provides buffered outputs from stages 1 through 7 and resets all stages to logic zero when the master-reset input receives a logic 1. It is packaged in a 14-pin MDIP and operates across a 3 V to 15 V supply range.
What is the operating voltage of CD4024BCN?
The CD4024BCN operates from 3 V to 15 V, as stated in the onsemi device description. This range supports conventional 5 V CMOS logic and permits higher supply voltages when compatible external circuitry is used. Because it is a CD4000-series device, the power rails should be connected according to the datasheet and unused inputs must be held at a defined logic level.
How does the CD4024BCN count?
The CD4024BCN increments once for every negative transition of the clock input, making it a negative-edge-triggered binary counter. According to the manufacturer datasheet, all seven counter stages are ripple-connected and the outputs from stages 1 through 7 are buffered. A logic-high master reset forces every stage back to logic zero, establishing the initial count before normal operation begins.
Where can I download the CD4024BCN datasheet PDF?
The CD4024BCN datasheet can be obtained through the onsemi datasheet page linked from this product page or through the archived CD4024 manufacturer documentation listed below. The datasheet contains the authoritative pin description, supply limits, timing characteristics, electrical characteristics, and application information. Use the manufacturer document rather than a distributor summary when assigning pins or calculating timing margins.
Where is the CD4024BCN pinout?
The CD4024BCN pinout is distributed across a 14-pin MDIP, with clock on pin 1, master reset on pin 2, count outputs on pins 3 through 6 and 8 through 11, VSS on pin 7, and VDD on pin 12. According to the CD4024 pin-description table, pins 13 and 14 are not connected. Use that table when assigning PCB tracks or socket positions.
What is the difference between CD4024BCN and MC14024BCP?
The CD4024BCN and MC14024BCP are both 7-stage ripple counters with buffered stage outputs and negative-edge counting, allowing them to use the same 14-pin DIP footprint. The MC14024BCP is identified in cross-reference material as a close functional equivalent. Final interchangeability still requires checking voltage limits, timing, output behavior, and temperature grade against the specific manufacturer datasheets.
Is CD4024BCN suitable for divide-by-8 applications?
Yes, the CD4024BCN can implement divide-by-8 operation by using the buffered output from stage 3 as the feedback clock. The stage output changes once every eight input-clock cycles, producing the divided transition sequence. Confirm that the selected stage settles before the next feedback edge and calculate the cumulative ripple delay into the design timing budget.
When should I choose CD4024BCN over MC14024BCP?
Choose the CD4024BCN when the design specifically calls for the onsemi CD4024BCN device or its established CD4000 CMOS behavior. Choose the MC14024BCP when its documented electrical and timing characteristics provide a better match for the intended supply voltage, clock rate, or environmental requirements. Both use the same 14-pin DIP footprint, so the choice should be based on verified operating limits rather than physical fit alone.
What is the best drop-in replacement for CD4024BCN?
The closest drop-in choices include the Fairchild Semiconductor CD4024BCN, STMicroelectronics CD4024BE, Texas Instruments CD4024BE, and Nexperia HEF4024B in compatible 14-pin DIP packages. Their 7-stage counter function and pin arrangement support direct substitution, but supply range, propagation timing, output drive, and temperature ratings must be checked against the original design before production use.
Can HEF4024B replace CD4024BCN?
The Nexperia HEF4024B is a 14-pin DIP-compatible 7-stage binary ripple counter that can serve as a direct-footprint replacement for the CD4024BCN. According to CMOS counter cross-reference information, both devices provide seven buffered counter outputs and master reset. Verify the operating voltage, clock-frequency limit, and absolute maximum ratings in the Nexperia datasheet for the selected package variant.
What is the best onsemi equivalent for CD4024BCN?
The onsemi MC14024BCP is the closest same-manufacturer alternative identified for the CD4024BCN because it is a 7-stage ripple counter in a 14-pin DIP package with buffered stage outputs. The onsemi MC14024BCPG provides a similar temperature-grade and lead-free ordering option within the same family. Confirm timing, supply limits, and environmental requirements before selecting either part.
Where can I buy CD4024BCN and check current lead time?
Use the Request a Quote form on this XAIPART page to request CD4024BCN availability, lead time, and order quantities. The current status should be confirmed at the time of quotation because inventory, lifecycle timing, and packaging requirements can change. The form allows the request to be associated with the exact CD4024BCN MPN instead of a generic CD4024 family designation.
What is the price of CD4024BCN?
Use the Request a Quote form on this XAIPART page for the current CD4024BCN quotation. Commercial terms can vary with order quantity, package format, and required delivery date, so a static figure would not reliably reflect current availability. Submit the target MPN and quantity through the form to obtain a current response.
Is CD4024BCN in stock?
Current CD4024BCN inventory should be confirmed through the Request a Quote form on this page before a build is committed. Although the component is actively offered as a 14-pin MDIP counter, stock levels can change by package, quantity, and regional fulfillment conditions. Provide the required quantity and date on the quote request to receive a current allocation response.
What are the key specifications of CD4024BCN that engineers should know?
The CD4024BCN is a 7-bit, 7-stage CMOS ripple counter with a 3 V to 15 V supply range, negative-edge clock triggering, buffered stage outputs, and a logic-high master reset. It is housed in a 14-pin MDIP. According to the onsemi datasheet description, the counter advances once per negative clock transition and returns all stages to zero when reset is asserted.
What are the main design pitfalls when using CD4024BCN?
The principal pitfall is treating the counter as a synchronous binary counter. The CD4024BCN is a ripple device, so transition delay accumulates through the internal stages and the final output may settle later than the first output. Designers must also account for unused-input states, reset release timing, supply decoupling, and the input frequency permitted by the selected supply voltage.

工程參考資料,適用於 CD4024BCN — 比較、設計指引及合規資訊。

選型指南

Choose the onsemi CD4024BCN for new or maintained CD4000-series designs that require a 14-pin DIP 7-stage ripple counter, negative-edge clocking, and buffered outputs across a 3 V to 15 V supply range. Select onsemi MC14024BCP or MC14024BCPG when an alternate ordering option within the same manufacturer is preferred, after checking timing and temperature limits. Fairchild Semiconductor CD4024BCN is a direct functional alternative for legacy production. STMicroelectronics or Texas Instruments CD4024BE and Nexperia HEF4024B may fit DIP-14 designs, but their voltage, propagation-delay, and environmental limits must be verified. Physical fit alone is insufficient: clock frequency, reset polarity, output levels, supply range, and the settling delay of the highest decoded stage are the decisive selection criteria.

與替代品比較

參數 本產品 MC14024BCP MC14024BCPG CD4024BCN CD4024BE CD4024BE
Brand onsemi onsemi onsemi Fairchild Semiconductor STMicroelectronics Texas Instruments
Package 14-pin MDIP (DIP-14) 14-pin MDIP (DIP-14) 14-pin MDIP (DIP-14) 14-pin MDIP (DIP-14) 14-pin MDIP (DIP-14) 14-pin MDIP (DIP-14)
Counter Type 7-stage ripple-carry binary counter 7-stage ripple counter 7-stage ripple counter 7-stage ripple-carry binary counter 7-stage ripple counter 7-stage ripple counter
Counter Resolution 7 bits 7 bits 7 bits 7 bits 7 bits 7 bits
Clock Triggering Edge Negative edge Negative edge Negative edge Negative edge Negative edge Negative edge
Output Buffering Buffered outputs from stages 1 through 7 Buffered stage outputs Buffered stage outputs Buffered outputs from stages 1 through 7 Buffered stage outputs Buffered stage outputs
Reset Function Master reset to logic zero Master reset Master reset Master reset to logic zero Master reset Master reset

主要差異化特點

  • Provides seven externally accessible buffered count bits (對比MC14024BCP)
  • Supports a broad 3 V to 15 V CMOS supply range (對比HEF4024B)
  • Uses a direct negative-edge counting convention (對比CD4024BE)

設計說明

Treat the CD4024BCN as a ripple counter rather than a synchronous counter. The negative clock transition propagates through successive internal stages, so Q0 can change before the final output has settled. When decoding or sampling a high-order output, include the cumulative stage delay in the timing budget and avoid using a feedback edge until the selected output meets the receiving circuit's setup requirement.

The master-reset input must be driven to a defined logic level. Leaving it floating can permit noise-induced resets in a noisy system. If reset is released while the clock is transitioning, the counter may advance unexpectedly; synchronize reset release away from the active clock edge and keep the reset trace short. A pull-down or pull-up component should be selected only if its logic level agrees with the active-high reset function.

Place the supply bypass capacitor close to VDD and VSS, and route the clock and reset paths away from high-current switching nodes. The 14-pin DIP layout makes prototype construction straightforward, but long unprotected traces can pick up clock glitches in industrial or laboratory environments. Use a ground reference adjacent to the device, minimize loop area, and consider a small series resistor near the clock source when edge ringing or repeated triggering is observed.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The CD4024BCN is a general-purpose CMOS logic counter rather than an automotive-qualified device. Specific environmental and material-compliance status was not established from the available manufacturer and distributor pages.

相關搜尋

cd4024bcn datasheet cd4024bcn pinout cd4024bcn datasheet pdf CD4024BCN 7-bit counter CD4024BCN 3V 15V CD4024BCN DIP-14 CD4024BCN binary divider CD4024BCN equivalent CD4024BCN replacement CD4024BCN vs MC14024BCP onsemi CD4024BCN CD4024BCN price

相關元件與詞彙

onsemi CD4024BCN MC14024BCP MC14024BCPG Fairchild Semiconductor CD4024BCN STMicroelectronics CD4024BE Texas Instruments CD4024BE Nexperia HEF4024B CMOS CD4000 series binary counter ripple-carry counter logic IC clock and timing circuit digital semiconductor negative-edge triggering master reset buffered output 14-pin MDIP DIP-14 through-hole package frequency divider binary sequencing 3 V to 15 V supply
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情