CD4024BCN - 7-Bit Ripple Binary Counter | onsemi
부품 번호: CD4024BCN ✓ 활성CD4024BCN 개요
A binary counter is a sequential digital circuit that stores a count as a set of binary bits and advances that count when triggered. A ripple-carry counter implements the stages in sequence, so each stage clocks the following stage. The CD4024BCN belongs to the CD4000 CMOS logic family, combining counters into the broader category of logic ICs, clock and timing circuits, and digital semiconductors.
The principal features include seven counter stages, externally buffered outputs from stage 1 through stage 7, a negative-edge-triggered clock, and a direct master-reset function. Its 3 V to 15 V supply range permits operation from conventional 5 V logic systems through higher-voltage CMOS rails. Buffered stage outputs allow each count bit to be used without directly driving an additional counter stage through an external buffer.
CD4000-series CMOS devices use positive and negative supply rails, and the CD4024BCN includes a standard 14-pin DIP-style interface. Because the internal stages form a ripple chain, cumulative propagation delay across all seven stages can affect the time available for the final output to settle after a clock transition. Applications with high-frequency requirements must therefore account for both the counter operating frequency and the settling requirement of the particular output bit being sampled.
Typical uses include divide-by-2 through divide-by-128 clock generation, event counting, industrial timing, programmable sequencing, digital test equipment, and general-purpose logic control. The reset input allows the counter to establish a known starting state before counting begins. In a divide-by-N arrangement, one or more of the seven outputs can be combined so that the active-low transition of the selected bit establishes the repetition rate.
For reliable implementation, keep the clock source clean and respect the input and output timing limits stated in the manufacturer datasheet. Provide adequate bypassing across the supply pins, especially when the counter drives external control logic or long signal routes. Confirm reset release timing relative to the active clock edge so that reset noise or a slowly changing reset edge does not create an unintended count event.
This page combines functional interpretation, practical design guidance, pin-level implementation details, drop-in replacement analysis, and parameter-by-parameter comparison. It is designed to help engineers evaluate the CD4024BCN for legacy CMOS, industrial, educational, control, and timing applications without overlooking reset behavior, ripple delay, supply-voltage compatibility, or package-level replacement constraints.
드롭인 대체품: CD4024BCN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CD4024BCN (동일 폼 팩터 및 풋프린트) — 차이점: Logic Family, Supply Voltage Range.
MC14024BCP
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC14024BCPG
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4024BCN
✅ 드롭인가격 문의
데이터시트 보기 →CD4024BE
✅ 드롭인가격 문의
데이터시트 보기 →CD4024BE
✅ 드롭인가격 문의
데이터시트 보기 →HEF4024B
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC14024BCN
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4024BCN 최대 정격 & 전기적 특성
| Product Type | CMOS ripple-carry binary counter |
| Manufacturer | onsemi |
| Number of Counter Stages | 7 stages |
| Counter Resolution | 7 bits |
| Number of Externally Accessible Outputs | 7 outputs, stages 1 through 7 |
| Clock Triggering Edge | Negative edge |
| Reset Type | Master reset to logic 0 |
| Active Reset Level | Logic 1 |
| Supply Voltage Range | 3 V to 15 V |
| Logic Family | CD4000 CMOS |
| 패키지 | 14-pin MDIP |
| 실장 유형 | Through-hole |
| 핀 수 | 14 pins |
| Output Buffering | Buffered outputs from stages 1 through 7 |
| Logic Levels | CMOS logic levels |
CD4024BCN 핀 구성
| 핀 1 | CLK — Negative-edge-triggered clock input |
| 핀 2 | MR — Master reset input; a logic 1 resets all stages to logic zero |
| 핀 3 | Q0 — Buffered output from counter stage 1 |
| 핀 4 | Q1 — Buffered output from counter stage 2 |
| 핀 5 | Q2 — Buffered output from counter stage 3 |
| 핀 6 | Q3 — Buffered output from counter stage 4 |
| 핀 7 | VSS — Ground or negative supply reference |
| 핀 8 | Q4 — Buffered output from counter stage 5 |
| 핀 9 | Q5 — Buffered output from counter stage 6 |
| 핀 10 | Q6 — Buffered output from counter stage 7 |
| 핀 11 | Q7 — Buffered output from the seventh counter stage |
| 핀 12 | VDD — Positive supply input |
| 핀 13 | NC — Not connected |
| 핀 14 | NC — Not connected |
일반적인 애플리케이션
CD4024BCN 적합 용도: 6 애플리케이션s: Binary Frequency Divider, Industrial Event Counter, Digital Sequencer, Timing and Delay Reference, Educational Logic Trainer, Legacy CMOS Control System.
Binary Frequency Divider
The CD4024BCN divides an input clock by powers of two by feeding a selected buffered counter output back to the clock input. Stage 1 produces a divide-by-2 signal, stage 3 provides divide-by-8 operation, and stage 7 can generate a divide-by-128 output. Because the device is a ripple counter, the feedback output must settle before the next triggering edge, so the maximum usable input frequency should include the cumulative propagation delay of the selected stages. The 3 V to 15 V operating range also allows the same divider topology to be used across multiple CMOS supply levels when the downstream receiver is compatible.
추천
Industrial Event Counter
The seven buffered outputs of the CD4024BCN allow an industrial controller to observe a binary event count without decoding a multiplexed bus. A sensor, limit switch, or line-frequency signal can provide the negative clock transition, while the master-reset input establishes zero before a production cycle begins. The 3 V to 15 V supply range accommodates conventional control-logic rails, but the input must remain within the counter's specified voltage and timing limits. In a noisy factory environment, protect clock and reset traces, provide local supply bypassing, and avoid relying on a slow reset edge when an immediate and repeatable reset is required.
추천
Digital Sequencer
The CD4024BCN can function as a programmable sequence generator by combining one of its seven binary outputs with a next-state decoder. Each selected count value advances the system to the following state, making the counter suitable for stepper sequencing, test-pattern selection, and repetitive control cycles. The master reset returns the sequence to its starting point, while the buffered outputs provide separate signals for state decoding. Because the stages ripple internally, state-transition timing must include output settling before control logic acts. A system operating from 5 V can use the device directly when its input thresholds and output levels match the selected external logic family.
추천
Timing and Delay Reference
A clock source connected to the CD4024BCN can be divided down to create long timing intervals without requiring a large counter chain. Selecting an upper-stage output produces a proportionally longer interval and reduces the number of external components. This arrangement is useful in test equipment, instrumentation, timer boards, and periodic control systems. The relevant timing budget must account for the frequency tolerance of the source clock, the counter's maximum operating frequency, and the ripple propagation delay through the selected stage. Reset timing should also be synchronized when timing accuracy depends on a repeatable starting point.
추천
Educational Logic Trainer
The CD4024BCN is suitable for educational circuits that demonstrate binary counting, ripple propagation, reset behavior, and state decoding. Its exposed 14-pin DIP package permits students to observe several counter stages on breadboards or socketed training boards. The negative-edge clock trigger should be explained clearly so that laboratory measurements relate each output transition to the preceding stage. A logic analyzer can display the Q0-through-Q7 relationship and reveal the delay between adjacent stages. Since the device uses a 3 V to 15 V range, the trainer must set the rails consistently and must not exceed the manufacturer's absolute maximum ratings.
추천
Legacy CMOS Control System
CD4024BCN is useful when maintaining or reproducing equipment built around CD4000-series CMOS logic. Its seven-stage counter can retain binary count state, support event counting, or create divided timing signals without introducing a modern microcontroller into the original architecture. The 14-pin MDIP package preserves compatibility with existing through-hole boards and socketed repairs. For a reliable replacement, the engineer should verify supply-voltage range, reset polarity, clock edge, output levels, and maximum clock frequency against the original schematic and the manufacturer datasheet. Supply bypassing and unused-input handling are especially important when operating within older mixed-logic systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: CD4024BCN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC14024BCP | MC14024BCPG | CD4024BCN | CD4024BE | CD4024BE |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | Fairchild Semiconductor | STMicroelectronics | Texas Instruments |
| Package | 14-pin MDIP (DIP-14) | 14-pin MDIP (DIP-14) | 14-pin MDIP (DIP-14) | 14-pin MDIP (DIP-14) | 14-pin MDIP (DIP-14) | 14-pin MDIP (DIP-14) |
| Counter Type | 7-stage ripple-carry binary counter | 7-stage ripple counter | 7-stage ripple counter | 7-stage ripple-carry binary counter | 7-stage ripple counter | 7-stage ripple counter |
| Counter Resolution | 7 bits | 7 bits | 7 bits | 7 bits | 7 bits | 7 bits |
| Clock Triggering Edge | Negative edge | Negative edge | Negative edge | Negative edge | Negative edge | Negative edge |
| Output Buffering | Buffered outputs from stages 1 through 7 | Buffered stage outputs | Buffered stage outputs | Buffered outputs from stages 1 through 7 | Buffered stage outputs | Buffered stage outputs |
| Reset Function | Master reset to logic zero | Master reset | Master reset | Master reset to logic zero | Master reset | Master reset |
주요 차별점
- Provides seven externally accessible buffered count bits (vs MC14024BCP)
- Supports a broad 3 V to 15 V CMOS supply range (vs HEF4024B)
- Uses a direct negative-edge counting convention (vs CD4024BE)
설계 노트
Treat the CD4024BCN as a ripple counter rather than a synchronous counter. The negative clock transition propagates through successive internal stages, so Q0 can change before the final output has settled. When decoding or sampling a high-order output, include the cumulative stage delay in the timing budget and avoid using a feedback edge until the selected output meets the receiving circuit's setup requirement.
The master-reset input must be driven to a defined logic level. Leaving it floating can permit noise-induced resets in a noisy system. If reset is released while the clock is transitioning, the counter may advance unexpectedly; synchronize reset release away from the active clock edge and keep the reset trace short. A pull-down or pull-up component should be selected only if its logic level agrees with the active-high reset function.
Place the supply bypass capacitor close to VDD and VSS, and route the clock and reset paths away from high-current switching nodes. The 14-pin DIP layout makes prototype construction straightforward, but long unprotected traces can pick up clock glitches in industrial or laboratory environments. Use a ground reference adjacent to the device, minimize loop area, and consider a small series resistor near the clock source when edge ringing or repeated triggering is observed.
규정 준수 정보
The CD4024BCN is a general-purpose CMOS logic counter rather than an automotive-qualified device. Specific environmental and material-compliance status was not established from the available manufacturer and distributor pages.