CS4340-DSZ - 24-Bit 96kHz Stereo DAC | Cirrus Logic
MPN: CS4340-DSZ ✗ 停產CS4340-DSZ 概覽
An audio DAC is a mixed-signal semiconductor that transforms digital PCM audio samples into continuous analog voltage signals. The CS4340 belongs to the DAC family within the broader audio converter hierarchy: digital audio source, audio DAC, analog audio amplifier, and loudspeaker or line-level output. This conversion stage is particularly important in compact consumer, industrial, and communications equipment where a low-noise local DAC can reduce dependence on a larger system-on-chip.
The CS4340 provides digital interpolation, fourth-order delta-sigma digital-to-analog conversion, digital de-emphasis, and switched-capacitor analog filtering. Its 24-bit resolution supports high-fidelity audio processing, while its 96 kHz maximum sampling rate accommodates 48 kHz source material and a substantial margin above the CD base rate. The reported 101 dB dynamic range provides a measurable signal-to-noise advantage for line-level audio designs.
Popguard technology is a notable implementation feature because it reduces output transients during power-up and power-down when the DAC operates from a single supply. The analog outputs still require suitable DC-blocking capacitors when used in a single-supply configuration, allowing the circuit to avoid the startup pops commonly associated with single-ended converters. The SPI-compatible control interface supports configuration of the audio subsystem without requiring a parallel control bus.
Typical uses include digital audio decoding, compact multimedia equipment, USB or portable audio accessories, communications terminals, and industrial audio panels. In these systems, the CS4340 can receive serial digital audio from a source controller and provide left and right analog outputs for a headphone or line amplifier. The 16-pin SOIC footprint simplifies assembly on conventional surface-mount boards.
When designing around the CS4340-DSZ, follow the manufacturer datasheet for the pin-description table, supported sampling rates, digital interface timing, output filtering, and recommended external components. Maintain a clean analog output path, use short traces around the DAC, and decouple the analog and digital supply pins according to the application circuit. Account for DC-offset requirements when selecting output capacitors.
This product page combines the device specifications, lifecycle position, verified technical comparisons, and practical design guidance with direct access to the manufacturer datasheet and sourcing request form. It supports engineers comparing the CS4340-DSZ with related Cirrus Logic stereo DAC options for resolution, interface, package, and lifecycle requirements.
直接替換替代品,適用於 CS4340-DSZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CS4340-DSZ (相同外形與佔位) — 差異在於 Digital De-emphasis, Digital Interpolation, Package, Analog Output Filtering, Lifecycle Status.
CS4340-KSZ
✅ 直接替換聯絡詢價
查看資料表 →CS4340-BS
✅ 直接替換📋 參考替代品(不在目錄中)
CS4341-KS
✅ 直接替換📋 參考替代品(不在目錄中)
CS4341-CZZ
✅ 直接替換聯絡詢價
查看資料表 →CS4341-KSZ
✅ 直接替換聯絡詢價
查看資料表 →CS4340-DSZ 最大額定值與電氣特性
| Product Type | Stereo audio digital-to-analog converter |
| 解析度 | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Dynamic Range | 101 dB |
| Digital Interface | SPI |
| 供應電壓 | 2.7 V to 3.6 V, 5 V |
| Supply Type | Single supply |
| Number of Audio Channels | 2 channels |
| 輸出類型 | Stereo analog |
| 封裝 | 16-pin SOIC, 3.90 mm width |
| 安裝類型 | Surface mount |
| 工作溫度 | -40 C to +85 C |
| Digital-to-Analog Architecture | Fourth-order delta-sigma |
| Digital Interpolation | Internal |
| Digital De-emphasis | Supported |
| Analog Filtering | Switched-capacitor |
| Power-Up Transient Control | Popguard technology |
| 生命週期狀態 | Obsolete (EOL) |
CS4340-DSZ 16-pin soic, 3.90 mm width 腳位配置指南
CS4340-DSZ(16-pin soic, 3.90 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS4340-DSZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS4340-DSZ 適用於 6 應用s: Digital Audio Accessory, Portable Audio Playback, USB Audio Interface, Communications Audio Terminal, Industrial Audio Panel, Digital Mixer and Monitor.
Digital Audio Accessory
The CS4340-DSZ fits a compact digital audio accessory that accepts PCM audio from a USB controller, portable player, or communications source and produces left and right analog channels. Its 24-bit resolution and 96 kHz maximum sampling rate support high-quality source handling, while the 101 dB dynamic range gives the system a measurable noise-performance target. The SPI-compatible control interface allows operating-mode and configuration management through a compact digital controller. In a practical implementation, the DAC outputs feed a line or headphone amplifier, and Popguard technology helps suppress startup and shutdown transients when the design uses external DC-blocking capacitors.
推薦
Portable Audio Playback
The CS4340-DSZ is appropriate for portable playback equipment where a dedicated low-noise stereo DAC can improve the analog output stage without requiring a high-performance application processor to perform conversion. Its maximum 96 kHz sampling rate covers 48 kHz program material with additional operating headroom, and the 24-bit interface preserves the source word length. The 16-pin SOIC package also offers a conventional surface-mount solution for compact boards. Designers should keep the digital audio and clock routing compact, use clean analog grounding, and account for the output DC offset when selecting the series blocking capacitors.
推薦
USB Audio Interface
A USB audio interface can use the CS4340-DSZ as its final two-channel conversion stage after a USB controller has recovered the clock and decoded the PCM stream. The converter's 24-bit resolution, 96 kHz maximum rate, and 101 dB dynamic range align with high-resolution playback targets, while its SPI interface provides a separate path for configuration and control. The DAC should be placed near the analog output connector to minimize sensitive trace length. Supply decoupling, ground partitioning, and the manufacturer-recommended output network remain critical to preserving the converter's noise performance in the finished interface.
推薦
Communications Audio Terminal
The CS4340-DSZ can serve as the stereo audio output converter in a communications terminal, industrial intercom, or voice-control panel that receives digital audio from a baseband or network processor. The two-channel architecture supports separate left and right outputs, while 24-bit data handling supports modern digital audio formats and the 96 kHz ceiling provides margin above common narrowband and wideband transport rates. Popguard output behavior is especially useful in equipment that can enter or leave active audio mode frequently. Firmware must handle format changes, mute states, and clock-domain transitions consistently with the manufacturer's interface timing requirements.
推薦
Industrial Audio Panel
An industrial audio panel can use the CS4340-DSZ to convert decoded digital notification or broadcast audio into a pair of line-level analog signals. The 101 dB dynamic range provides useful headroom for low-level audio, and the 24-bit, 96 kHz conversion capability accommodates professionally encoded source material. Its surface-mount SOIC package is convenient for automated assembly, while the SPI interface allows a system controller to configure the converter without tying up a parallel data bus. In an industrial enclosure, keep switching converters and high-current return paths away from the DAC outputs, and follow the reference layout for analog and digital supply connections.
推薦
Digital Mixer and Monitor
The CS4340-DSZ is suitable for a compact digital mixer, monitor controller, or multimedia playback module that requires dedicated left and right DAC outputs. The converter accepts serial digital audio through its SPI-compatible interface and produces analog outputs suitable for downstream amplification. Its 24-bit word length and 101 dB dynamic range help preserve signal integrity through the conversion stage, while the 96 kHz rate supports higher-rate streams when required by the source. The implementation should synchronize the DAC to its audio clock, use the manufacturer's reset and mode behavior, and maintain short, symmetric analog routing between the chip and the output amplifier.
推薦
推薦產品摘要
工程參考資料,適用於 CS4340-DSZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS4340-KSZ | CS4340-BS | CS4341-KS | CS4341-CZZ | CS4341-KSZ |
|---|---|---|---|---|---|---|
| Package | 16-pin SOIC, 3.90 mm width | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC | 16-pin SOIC |
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz |
| Audio Channels | 2 stereo channels | 2 stereo channels | 2 stereo channels | 2 stereo channels | 2 stereo channels | 2 stereo channels |
主要差異化特點
- High-resolution conversion in a compact stereo package (對比CS4341-KS)
- Established Popguard transient-control implementation (對比CS4341-CZZ)
- Direct continuity for existing 16-pin SOIC designs (對比CS4341-KSZ)
設計說明
Place the DAC close to the analog output connector and the downstream amplifier. Keep the left and right output traces short, avoid routing them beneath switching nodes or high-current return paths, and connect the analog ground using the topology shown in the manufacturer application circuit. The CS4340-DSZ is a mixed-signal converter, so even a short analog output route can pick up noise if it shares space with digital clocks or power-converter routing.
Use the manufacturer-recommended decoupling arrangement for both analog and digital supplies, and keep the supply pins directly connected to their local capacitor return paths. The CS4340-DSZ supports operation from 2.7 V to 3.6 V and 5 V; select the interface voltage and analog biasing method accordingly. Avoid long supply traces between the decoupling capacitor, DAC supply pin, and ground return because they can reduce the effectiveness of local bypassing.
Do not assume that any CS4340 or CS4341 order code is automatically interchangeable. Verify package dimensions, pin numbering, control modes, supported formats, clock requirements, de-emphasis behavior, and output network in the manufacturer datasheet. The -DSZ device is specified for a 16-pin SOIC package, so a candidate with a TSSOP body cannot be fitted to the same PCB footprint without a board redesign.
Route the serial audio data and clock signals as a compact group, with continuous return paths beneath the source and receiver. Provide a low-impedance reference for the digital interface and avoid long stubs. The DAC's fourth-order delta-sigma architecture and internal filtering require clean clocking and a stable digital supply; clock jitter, ground discontinuity, or coupling from adjacent switching circuitry can affect the analog output even when nominal resolution remains 24 bit.
合規資訊
The CS4340-DSZ is identified as obsolete (EOL). Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the product information.