CS4341-CZZ - 24-Bit Stereo Audio DAC | Cirrus Logic
MPN: CS4341-CZZ ✗ 停產CS4341-CZZ 概覽
An audio DAC is a converter that transforms digital PCM audio samples into analog voltage signals suitable for amplification, recording, or line-level output. The CS4341 belongs to the broader digital-to-analog converter family within integrated circuits and combines digital interpolation, a fourth-order delta-sigma DAC, digital de-emphasis, and switched-capacitor analog filtering in one package.
The CS4341 supports 24-bit audio at rates up to 96 kSPS and includes digital volume control. Its Popguard technology reduces output transients during power-up and power-down when the outputs are connected through external DC-blocking capacitors. This feature is useful in single-supply systems where the analog output may otherwise move away from its normal operating point during supply transitions.
The converter architecture uses a fourth-order delta-sigma stage rather than a binary-weighting or resistor-ladder DAC. This approach supports high-resolution digital audio filtering and accurate stereo reproduction while requiring external passive components for output coupling and filtering. The digital interface uses SPI signaling, and the device operates as a stereo audio converter with two output channels.
Typical uses include compact digital audio equipment, multimedia systems, audio processing modules, and powered speaker or headphone products. A practical implementation can place the CS4341 downstream of an audio codec or processor, then pass its analog outputs through DC-blocking capacitors and an output reconstruction filter before driving a low-noise amplifier.
Power-supply and layout design should prioritize a quiet analog ground path, short output traces, stable reference connections, and correct placement of the required input, output, and filter capacitors. The manufacturer datasheet should be used to assign every signal and supply pin and to confirm the recommended component values for the selected output configuration.
This product page combines the exact CS4341-CZZ package and interface details with practical guidance covering obsolete-part planning, drop-in sourcing, analog filtering, Popguard implementation, and PCB layout. These engineering notes help buyers evaluate the DAC within the wider audio signal chain rather than relying only on a basic resolution and sample-rate listing.
直接替換替代品,適用於 CS4341-CZZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: CS4341-CZZ (相同外形與佔位) — 差異在於 Digital De-emphasis, Package, Digital Interpolation, Lifecycle Status, Maximum Sampling Rate.
CS4341-CZZR
✅ 直接替換📋 參考替代品(不在目錄中)
CS4341-CZZ 最大額定值與電氣特性
| Device Type | Stereo audio digital-to-analog converter |
| Number of Channels | 2 channels |
| 解析度 | 24 bit |
| Maximum Sampling Rate | 96 kSPS |
| Architecture | Fourth-order delta-sigma DAC |
| Digital Interface | SPI |
| Input Supply Voltage Range | 3 V to 3.6 V |
| 5 V Operation | 5 V |
| 工作溫度範圍 | -10 °C to +70 °C |
| 封裝 | 16-pin TSSOP, 4.40 mm width |
| 安裝類型 | Surface mount |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| Output Transient Control | Popguard technology |
| Digital Interpolation | Internal |
| Digital De-emphasis | Internal |
| Analog Output Filtering | Switched-capacitor filtering |
| Digital Volume Control | Internal |
| Output DC Blocking | External capacitors required for Popguard operation |
| 生命週期狀態 | Obsolete |
CS4341-CZZ 16-pin tssop, 4.40 mm width 腳位配置指南
CS4341-CZZ(16-pin tssop, 4.40 mm width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: CS4341-CZZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS4341-CZZ 適用於 6 應用s: Compact Digital Audio Player, Multimedia Speaker Interface, Audio Processing Module, Digital Recording Output, Powered Headphone Product, Legacy Audio Equipment Repair.
Compact Digital Audio Player
The CS4341-CZZ suits compact digital audio players because it combines 24-bit stereo conversion, a maximum sampling rate of 96 kSPS, and an SPI interface in a 16-pin TSSOP package. Place it between the digital audio controller and the output reconstruction network to produce an analog stereo signal. The device's internal interpolation, de-emphasis, and switched-capacitor filtering reduce the number of digital functions the source controller must implement. Confirm the controller's clocking, data format, and master/slave behavior against the manufacturer interface diagrams.
推薦
Multimedia Speaker Interface
The CS4341-CZZ can provide the analog stereo input for a powered-speaker or multimedia monitor design. Its 24-bit conversion and 96 kSPS maximum rate support high-resolution source material, while Popguard technology helps control startup and shutdown transients when external DC-blocking capacitors are installed. The analog outputs still require the recommended reconstruction filter and a power amplifier selected for the target impedance. Validate channel synchronization, output DC offset, and audible transients during power sequencing.
推薦
Audio Processing Module
The CS4341-CZZ is suitable for a modular audio-processing board that accepts digital PCM streams and provides stereo analog outputs. Its SPI interface and compact 16-pin TSSOP package simplify integration with dedicated audio processors, while internal digital interpolation and de-emphasis support standard digital playback pipelines. Use separate analog and digital ground-return planning around the converter, and place the output capacitors and reconstruction components close to the device. Validate all timing assumptions at the maximum 96 kSPS operating rate.
推薦
Digital Recording Output
A digital recording product can use the CS4341-CZZ as a monitoring or auxiliary stereo output converter when a line-level analog destination is required. The 24-bit DAC and 96 kSPS ceiling support high-resolution playback monitoring, while the SPI interface allows a recorder controller to configure audio data and volume. Design the analog path for the destination's input impedance and allow sufficient output-filter and amplifier headroom. Confirm that ground offsets between the converter and recording circuitry remain within the system noise and ground-error budget.
推薦
Powered Headphone Product
The CS4341-CZZ can serve as the converter stage in a powered-headphone product requiring a small stereo DAC. Its 24-bit resolution and 96 kSPS support preserve high-resolution source data, while Popguard reduces supply-transition transients when the recommended DC-blocking capacitors are used. A separate low-noise headphone amplifier remains necessary to set output impedance and current capability. Select passive and filter values from the manufacturer reference circuit, then verify channel balance and startup behavior with the intended headphones connected.
推薦
Legacy Audio Equipment Repair
The obsolete CS4341-CZZ is particularly relevant to repairing or sustaining older digital audio equipment that used the CS4341 in a 16-pin TSSOP footprint. Matching the existing footprint allows an engineer to retain the established PCB and signal architecture when replacing the original converter. Before installation, compare the exact ordering suffix, pin assignments, supply requirements, and external component values with the circuit being repaired. After replacement, check startup transients, digital clocking, stereo synchronization, and output DC offset across repeated power cycles.
推薦
推薦產品摘要
工程參考資料,適用於 CS4341-CZZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS4341-CZZR |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 16-TSSOP | 16-TSSOP - same |
| Device Type | Stereo audio DAC | Stereo audio DAC |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kSPS | 96 kSPS |
| Channel Count | 2 channels | 2 channels |
| Digital Interface | SPI | SPI |
| Supply Voltage | 3 V to 3.6 V or 5 V | 3 V to 3.6 V or 5 V |
| DAC Architecture | Fourth-order delta-sigma | Fourth-order delta-sigma |
| Operating Temperature | -10 °C to +70 °C | -10 °C to +70 °C |
主要差異化特點
- High-resolution stereo conversion in a compact package (對比CS4341-CZZR)
- Integrated digital audio functions reduce external controller burden (對比CS4341-CZZR)
- Popguard support addresses supply-transition transients (對比CS4341-CZZR)
- Exact-footprint continuity for existing designs (對比Newer stereo DAC families)
設計說明
Keep the CS4341-CZZ close to the controller that supplies serial audio data and place the recommended input and output capacitors near their associated pins. Route the two analog output channels with similar geometry and symmetry to minimize channel-to-channel timing and gain differences. Keep switching-regulator, clock, and high-current output-amplifier nodes away from the analog output traces.
Do not treat Popguard as a substitute for external DC blocking. The manufacturer datasheet specifically describes using Popguard with capacitors in series with the audio outputs to minimize startup and shutdown transients in single-supply systems. Use the reference circuit's capacitor values and verify offset, channel balance, and audible transients across repeated power cycles.
Provide a quiet supply and local decoupling at the CS4341-CZZ. Follow the manufacturer pin table to identify the analog and digital supply or ground connections, and avoid sharing high-return-current paths with analog output reference currents. If the digital source and converter use separate regulators, account for startup order and ensure the controller does not begin transmitting before the DAC supply is valid.
Review SPI clock timing, data setup and hold requirements, and the serial data format at the maximum 96 kSPS sample rate. The CS4341-CZZ is a digital audio converter, so a nominal matching clock rate is not sufficient if edge timing, polarity, or control sequencing differs. Use the manufacturer timing diagrams and test with the intended source controller.
For repair and substitution work, compare the exact ordering suffix and external component network rather than relying on the base CS4341 family name. The CS4341-CZZR is the closest documented ordering option in the same 16-pin TSSOP format, but suffix and packing differences must match the intended assembly process. Confirm pin assignments from the manufacturer datasheet before soldering.
合規資訊
The device is an obsolete consumer audio DAC; no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established.