CS8401A-IS - Dual-Channel Digital Audio Transmitter | Cirrus Logic
MPN: CS8401A-IS ✗ 停產CS8401A-IS 概覽
A digital audio interface transmitter converts parallel or serial source audio into a standardized digital transmission format. The CS8401A belongs to the digital audio transmitter hierarchy, combining channel multiplexing, control-data handling, line encoding, and output-driver functions in one CMOS integrated circuit. This simplifies the output stage of CD, DVD, professional-audio, broadcast, and consumer-electronics systems compared with a discrete encoder implementation.
Key features include two-channel transmission, separate audio and control inputs, internal multiplex and biphase-mark encoding, and support for direct or transformer-coupled transmission lines. The device also includes power-down and reset protection with mute control. These functions allow designers to standardize digital-audio outputs while reducing external logic count and keeping the transmitter close to the system audio source.
Technically, the monolithic CMOS implementation combines the digital encoding functions with an output stage designed for digital-audio transmission lines. Internal multiplexing allows two audio channels to share one encoded interface, while the biphase-mark stage provides the line coding required by the supported AES/EBU, S/PDIF, and EIAJ CP-340 formats. The CS8401A-IS is therefore not a codec or DAC; it is the interface stage that converts already-generated audio information into a transmit-ready digital stream.
Typical applications include consumer digital-audio equipment, professional sound consoles, broadcast and studio signal chains, industrial instrumentation with digital audio outputs, computer multimedia equipment, and optical-disc player interfaces. The supported EIAJ CP-340 function also makes the transmitter relevant to CD-style digital-audio interfaces where that format is required.
Designers should keep the CS8401A-IS close to the transmitter output and observe the manufacturer’s input, output, decoupling, and grounding recommendations. Select the transformer-coupled configuration when the connected interface requires isolation or impedance matching; use the direct-drive configuration only when its output and loading requirements suit the target cable and receiver. Confirm the interface format, clocking, control polarity, and mute behavior before releasing a PCB design.
This product overview combines the manufacturer’s interface capabilities with practical package, sourcing, comparison, and replacement guidance. It also distinguishes the CS8401A transmitter from codecs and converters, helping engineers locate the CS8401A-IS datasheet, understand its 24-pin implementation, and determine whether a directly interchangeable ordering variant meets the required supply, temperature, and assembly conditions.
直接替換替代品,適用於 CS8401A-IS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
CS8401A-CS
✅ 直接替換📋 參考替代品(不在目錄中)
CS8401A-ISZ
✅ 直接替換📋 參考替代品(不在目錄中)
CS8401A-IS 最大額定值與電氣特性
| Product Type | Digital audio interface transmitter |
| Channel Count | 2 channels |
| Process Technology | Monolithic CMOS |
| Supported Audio Interface | AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 |
| Input Handling | Separate audio and control data inputs |
| Internal Encoding | Multiplex and biphase-mark encoding |
| 輸出配置 | Direct or transformer-coupled transmission-line drive |
| Supply Voltage Range | 4.5 V to 5.5 V |
| 工作溫度範圍 | -40°C to +85°C |
| Package Type | 24-pin SOIC |
| 安裝類型 | Surface-mount SOIC |
| Power-Down Function | Included |
| Reset Protection | Included |
| Mute Control | Included |
| Qualification | Industrial temperature range |
| RoHS 狀態 | Compliant |
CS8401A-IS 24-pin soic 腳位配置指南
CS8401A-IS(24-pin soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CS8401A-IS.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS8401A-IS 適用於 6 應用s: Professional Audio Console Output, Broadcast and Studio Signal Chain, Consumer Digital-Audio Equipment, Industrial Audio Test Equipment, Optical-Disc Player Interface, Computer and Multimedia Audio Equipment.
Professional Audio Console Output
The CS8401A-IS is appropriate for the digital-audio output section of a professional mixing console or studio signal processor. Its two-channel capability permits paired audio channels to be multiplexed into one encoded stream, while the internal biphase-mark encoder supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 formats. The 4.5 V to 5.5 V supply operates from a conventional 5 V rail, and the -40°C to +85°C range supports equipment intended for demanding ambient conditions. Place the transmitter close to the console output connector and follow the manufacturer’s grounding, bypass-capacitor, and direct-or-transformer output recommendations.
推薦
Broadcast and Studio Signal Chain
The CS8401A-IS can serve as the final digital transmission stage in broadcast monitors, studio accessories, and digital-audio routing equipment. Its internal multiplexing and biphase-mark encoding reduce the external circuitry needed to turn two source channels into a compatible digital stream. AES/EBU and IEC 958 S/PDIF support makes it suitable for standardized studio links, while EIAJ CP-340 support broadens compatibility with optical-disc-era equipment. The industrial -40°C to +85°C specification supports use in broadcast infrastructure, although the finished product must still control ground offsets, cable loading, and connector return losses.
推薦
Consumer Digital-Audio Equipment
The CS8401A-IS fits legacy and specialist consumer-audio products that require a standardized digital-audio transmitter rather than a general-purpose codec. Two audio channels can share one transmission interface, and the transmitter accepts audio and control information separately for internal multiplexing and encoding. Support for S/PDIF provides compatibility with digital receivers and consumer audio chains, while direct-drive and transformer-coupled outputs offer flexibility for different cable and isolation requirements. The 24-pin SOIC format supports conventional surface-mount assembly, but engineers must confirm the detailed pin assignments and external line components in the manufacturer datasheet before layout release.
推薦
Industrial Audio Test Equipment
The CS8401A-IS is suitable for industrial audio analyzers, signal-generation instruments, and interface test fixtures that produce standardized digital-audio streams. Its two-channel architecture allows a tester to exercise receivers using paired content, and the integrated biphase-mark encoder supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340. Operation over 4.5 V to 5.5 V and -40°C to +85°C supports laboratory and industrial equipment environments. For accurate measurements, isolate the digital output from analog test circuitry, use controlled cable termination, and select direct-drive or transformer coupling according to the receiver interface being tested.
推薦
Optical-Disc Player Interface
The CS8401A-IS is relevant to optical-disc and legacy digital-audio equipment because it supports the EIAJ CP-340 interface in addition to AES/EBU and S/PDIF. Two channels can be multiplexed and biphase-mark encoded within the transmitter, reducing the number of external encoding components required for a CP-340 output. The device can drive a transmission line directly or through a transformer, allowing implementation choices based on isolation and impedance requirements. Its -40°C to +85°C operating range supports industrial variants of player and conversion equipment, subject to lifecycle planning for an older family.
推薦
Computer and Multimedia Audio Equipment
The CS8401A-IS can provide a dedicated digital-audio transmit path in specialist multimedia equipment, recording interfaces, and computer-audio accessories. Two-channel multiplexing and internal biphase-mark encoding make it possible to generate a compliant digital-audio output close to the source connector, while separate audio and control inputs support integration with a surrounding digital signal path. The 4.5 V to 5.5 V supply is compatible with a 5 V system architecture, and the 24-pin SOIC package is widely supported by assembly methods. Verify connector format, clock source, mute polarity, and cable-termination requirements against the manufacturer application guidance.
推薦
推薦產品摘要
工程參考資料,適用於 CS8401A-IS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CS8401A-CS | CS8401A-ISZ |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC |
| Product Type | Digital audio interface transmitter | Digital audio interface transmitter | Digital audio interface transmitter |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Supported Interfaces | AES/EBU, IEC 958 S/PDIF, EIAJ CP-340 | CS8401A family interface functions | CS8401A family interface functions |
| Encoding Functions | Internal multiplex and biphase-mark encoding | Internal multiplex and biphase-mark encoding | Internal multiplex and biphase-mark encoding |
| Output Drive | Direct or transformer-coupled transmission line | Direct or transformer-coupled transmission line | Direct or transformer-coupled transmission line |
主要差異化特點
- Industrial-temperature ordering option (對比CS8401A-CS)
- Same-family pin-compatible sourcing path (對比CS8401A-ISZ)
- Integrated standards-compatible encoding (對比CS8401A-CS)
設計說明
The CS8401A-IS requires a supply within its 4.5 V to 5.5 V operating range. Place the manufacturer-recommended bypass capacitor immediately between the supply and ground pins, keep the loop compact, and provide a low-impedance return path. Check startup behavior in systems where the 5 V rail is produced by a switching converter; the transmitter's encoded audio output should not begin until the supply and control signals are valid.
Route the digital-audio output as a controlled transmission line rather than as an arbitrary long trace. Select the direct-drive or transformer-coupled configuration according to the receiver specification, cable impedance, isolation requirement, and expected loading. Keep the output away from clocks, switching nodes, and inductors, and validate rise time, jitter, eye opening, and common-mode behavior on the assembled board.
Assign every pin from the manufacturer pin-description table and preserve the pin numbering of the 24-pin SOIC footprint. Decoupling components, control pull devices, and output-network components should be positioned close to their associated pins. Because this family includes multiple ordering codes, record the selected suffix, temperature grade, and package variant in the schematic title block and assembly documentation.
Do not treat the CS8401A as a DAC or audio codec: it encodes and transmits digital-audio information rather than converting analog samples. Also verify the required clock, serial-audio input, control, mute, reset, and power-down polarity. The CS8401A-CP uses a PDIP package, so it is not a same-footprint substitute for the 24-pin SOIC CS8401A-IS.
合規資訊
The manufacturer product listing identifies the CS8401A-IS as RoHS compliant. It is an industrial-temperature digital-audio interface IC rather than an automotive-qualified device; no AEC-Q100 qualification is indicated.