CS8401A-IS - Dual-Channel Digital Audio Transmitter | Cirrus Logic
料号: CS8401A-IS ✗ 停产CS8401A-IS 概述
A digital audio interface transmitter converts parallel or serial source audio into a standardized digital transmission format. The CS8401A belongs to the digital audio transmitter hierarchy, combining channel multiplexing, control-data handling, line encoding, and output-driver functions in one CMOS integrated circuit. This simplifies the output stage of CD, DVD, professional-audio, broadcast, and consumer-electronics systems compared with a discrete encoder implementation.
Key features include two-channel transmission, separate audio and control inputs, internal multiplex and biphase-mark encoding, and support for direct or transformer-coupled transmission lines. The device also includes power-down and reset protection with mute control. These functions allow designers to standardize digital-audio outputs while reducing external logic count and keeping the transmitter close to the system audio source.
Technically, the monolithic CMOS implementation combines the digital encoding functions with an output stage designed for digital-audio transmission lines. Internal multiplexing allows two audio channels to share one encoded interface, while the biphase-mark stage provides the line coding required by the supported AES/EBU, S/PDIF, and EIAJ CP-340 formats. The CS8401A-IS is therefore not a codec or DAC; it is the interface stage that converts already-generated audio information into a transmit-ready digital stream.
Typical applications include consumer digital-audio equipment, professional sound consoles, broadcast and studio signal chains, industrial instrumentation with digital audio outputs, computer multimedia equipment, and optical-disc player interfaces. The supported EIAJ CP-340 function also makes the transmitter relevant to CD-style digital-audio interfaces where that format is required.
Designers should keep the CS8401A-IS close to the transmitter output and observe the manufacturer’s input, output, decoupling, and grounding recommendations. Select the transformer-coupled configuration when the connected interface requires isolation or impedance matching; use the direct-drive configuration only when its output and loading requirements suit the target cable and receiver. Confirm the interface format, clocking, control polarity, and mute behavior before releasing a PCB design.
This product overview combines the manufacturer’s interface capabilities with practical package, sourcing, comparison, and replacement guidance. It also distinguishes the CS8401A transmitter from codecs and converters, helping engineers locate the CS8401A-IS datasheet, understand its 24-pin implementation, and determine whether a directly interchangeable ordering variant meets the required supply, temperature, and assembly conditions.
直接替换替代料: CS8401A-IS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
CS8401A-CS
✅ 直接替换📋 参考替代料(不在目录中)
CS8401A-ISZ
✅ 直接替换📋 参考替代料(不在目录中)
CS8401A-IS 最大额定值与电气特性
| Product Type | Digital audio interface transmitter |
| Channel Count | 2 channels |
| Process Technology | Monolithic CMOS |
| Supported Audio Interface | AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 |
| Input Handling | Separate audio and control data inputs |
| Internal Encoding | Multiplex and biphase-mark encoding |
| 输出配置 | Direct or transformer-coupled transmission-line drive |
| Supply Voltage Range | 4.5 V to 5.5 V |
| 工作温度范围 | -40°C to +85°C |
| Package Type | 24-pin SOIC |
| 安装类型 | Surface-mount SOIC |
| Power-Down Function | Included |
| Reset Protection | Included |
| Mute Control | Included |
| Qualification | Industrial temperature range |
| RoHS 状态 | Compliant |
CS8401A-IS 24-pin soic 引脚配置指南
CS8401A-IS(24-pin soic 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CS8401A-IS.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CS8401A-IS 适用于 6 应用s: Professional Audio Console Output, Broadcast and Studio Signal Chain, Consumer Digital-Audio Equipment, Industrial Audio Test Equipment, Optical-Disc Player Interface, Computer and Multimedia Audio Equipment.
Professional Audio Console Output
The CS8401A-IS is appropriate for the digital-audio output section of a professional mixing console or studio signal processor. Its two-channel capability permits paired audio channels to be multiplexed into one encoded stream, while the internal biphase-mark encoder supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340 formats. The 4.5 V to 5.5 V supply operates from a conventional 5 V rail, and the -40°C to +85°C range supports equipment intended for demanding ambient conditions. Place the transmitter close to the console output connector and follow the manufacturer’s grounding, bypass-capacitor, and direct-or-transformer output recommendations.
推荐
Broadcast and Studio Signal Chain
The CS8401A-IS can serve as the final digital transmission stage in broadcast monitors, studio accessories, and digital-audio routing equipment. Its internal multiplexing and biphase-mark encoding reduce the external circuitry needed to turn two source channels into a compatible digital stream. AES/EBU and IEC 958 S/PDIF support makes it suitable for standardized studio links, while EIAJ CP-340 support broadens compatibility with optical-disc-era equipment. The industrial -40°C to +85°C specification supports use in broadcast infrastructure, although the finished product must still control ground offsets, cable loading, and connector return losses.
推荐
Consumer Digital-Audio Equipment
The CS8401A-IS fits legacy and specialist consumer-audio products that require a standardized digital-audio transmitter rather than a general-purpose codec. Two audio channels can share one transmission interface, and the transmitter accepts audio and control information separately for internal multiplexing and encoding. Support for S/PDIF provides compatibility with digital receivers and consumer audio chains, while direct-drive and transformer-coupled outputs offer flexibility for different cable and isolation requirements. The 24-pin SOIC format supports conventional surface-mount assembly, but engineers must confirm the detailed pin assignments and external line components in the manufacturer datasheet before layout release.
推荐
Industrial Audio Test Equipment
The CS8401A-IS is suitable for industrial audio analyzers, signal-generation instruments, and interface test fixtures that produce standardized digital-audio streams. Its two-channel architecture allows a tester to exercise receivers using paired content, and the integrated biphase-mark encoder supports AES/EBU, IEC 958 S/PDIF, and EIAJ CP-340. Operation over 4.5 V to 5.5 V and -40°C to +85°C supports laboratory and industrial equipment environments. For accurate measurements, isolate the digital output from analog test circuitry, use controlled cable termination, and select direct-drive or transformer coupling according to the receiver interface being tested.
推荐
Optical-Disc Player Interface
The CS8401A-IS is relevant to optical-disc and legacy digital-audio equipment because it supports the EIAJ CP-340 interface in addition to AES/EBU and S/PDIF. Two channels can be multiplexed and biphase-mark encoded within the transmitter, reducing the number of external encoding components required for a CP-340 output. The device can drive a transmission line directly or through a transformer, allowing implementation choices based on isolation and impedance requirements. Its -40°C to +85°C operating range supports industrial variants of player and conversion equipment, subject to lifecycle planning for an older family.
推荐
Computer and Multimedia Audio Equipment
The CS8401A-IS can provide a dedicated digital-audio transmit path in specialist multimedia equipment, recording interfaces, and computer-audio accessories. Two-channel multiplexing and internal biphase-mark encoding make it possible to generate a compliant digital-audio output close to the source connector, while separate audio and control inputs support integration with a surrounding digital signal path. The 4.5 V to 5.5 V supply is compatible with a 5 V system architecture, and the 24-pin SOIC package is widely supported by assembly methods. Verify connector format, clock source, mute polarity, and cable-termination requirements against the manufacturer application guidance.
推荐
推荐产品汇总
工程参考数据: CS8401A-IS ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CS8401A-CS | CS8401A-ISZ |
|---|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic | Cirrus Logic |
| Package | 24-pin SOIC | 24-pin SOIC | 24-pin SOIC |
| Product Type | Digital audio interface transmitter | Digital audio interface transmitter | Digital audio interface transmitter |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Supported Interfaces | AES/EBU, IEC 958 S/PDIF, EIAJ CP-340 | CS8401A family interface functions | CS8401A family interface functions |
| Encoding Functions | Internal multiplex and biphase-mark encoding | Internal multiplex and biphase-mark encoding | Internal multiplex and biphase-mark encoding |
| Output Drive | Direct or transformer-coupled transmission line | Direct or transformer-coupled transmission line | Direct or transformer-coupled transmission line |
关键差异点
- Industrial-temperature ordering option (对比 CS8401A-CS)
- Same-family pin-compatible sourcing path (对比 CS8401A-ISZ)
- Integrated standards-compatible encoding (对比 CS8401A-CS)
设计说明
The CS8401A-IS requires a supply within its 4.5 V to 5.5 V operating range. Place the manufacturer-recommended bypass capacitor immediately between the supply and ground pins, keep the loop compact, and provide a low-impedance return path. Check startup behavior in systems where the 5 V rail is produced by a switching converter; the transmitter's encoded audio output should not begin until the supply and control signals are valid.
Route the digital-audio output as a controlled transmission line rather than as an arbitrary long trace. Select the direct-drive or transformer-coupled configuration according to the receiver specification, cable impedance, isolation requirement, and expected loading. Keep the output away from clocks, switching nodes, and inductors, and validate rise time, jitter, eye opening, and common-mode behavior on the assembled board.
Assign every pin from the manufacturer pin-description table and preserve the pin numbering of the 24-pin SOIC footprint. Decoupling components, control pull devices, and output-network components should be positioned close to their associated pins. Because this family includes multiple ordering codes, record the selected suffix, temperature grade, and package variant in the schematic title block and assembly documentation.
Do not treat the CS8401A as a DAC or audio codec: it encodes and transmits digital-audio information rather than converting analog samples. Also verify the required clock, serial-audio input, control, mute, reset, and power-down polarity. The CS8401A-CP uses a PDIP package, so it is not a same-footprint substitute for the 24-pin SOIC CS8401A-IS.
合规信息
The manufacturer product listing identifies the CS8401A-IS as RoHS compliant. It is an industrial-temperature digital-audio interface IC rather than an automotive-qualified device; no AEC-Q100 qualification is indicated.