CS8427-CSZ - 96kHz Stereo Audio Transceiver | Cirrus Logic
MPN: CS8427-CSZ ✓ 啟用中CS8427-CSZ 概覽
A digital audio interface transceiver is an interface IC that accepts, conditions, and redistributes digital audio signals while supporting device control and clocking functions. The CS8427 sits within the digital-audio interface hierarchy: AES3 or serial digital audio sources enter the transceiver, internal control registers define operating behavior, and compatible digital-audio destinations receive the processed outputs. Its 96kHz sampling-rate support makes it relevant to consumer, professional, and industrial audio equipment.
The CS8427-CSZ combines two-channel digital audio handling with both AES3 and serial digital audio input and output paths. The four-wire microcontroller port provides comprehensive device control, allowing firmware to configure routing and operating parameters. A 28-pin SOIC package supports conventional surface-mount PCB assembly, while its 96kHz operating rate provides a defined basis for high-resolution audio designs.
The architecture is centered on digital rather than analog signal conversion. AES3-compatible signals provide a standardized digital-audio interface, while serial digital audio I/O supports direct connection to codecs, converters, and other digital audio devices. This distinction is important in professional equipment because digital interfaces can preserve signal integrity over longer interconnects when the clocking and source impedance requirements are satisfied.
Typical uses include surround-sound processing, digital mixing consoles, broadcast and studio equipment, digital amplifiers, audio-format converters, and consumer AV products. The two-channel organization also suits smaller systems requiring bidirectional digital audio routing without the channel count of a larger matrix mixer.
Designers should preserve the pin-specific clock, control, data, and power connections defined in the Cirrus Logic CS8427 datasheet. PCB layout, grounding, and interface signal integrity require particular care because digital-audio timing errors can manifest as clicks, word-boundary errors, or channel synchronization faults even when average data activity appears correct.
This page combines the CS8427-CSZ interface description with verified 96kHz, 2-channel, AES3, serial-audio, control-port, and 28-SOIC characteristics, plus application guidance and engineering-focused design notes that help engineers plan the transceiver within a complete digital-audio signal chain.
直接替換替代品,適用於 CS8427-CSZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品CS8427-CSZ 最大額定值與電氣特性
| Product Type | 96kHz stereo digital audio interface transceiver |
| Channel Count | 2 channels |
| Maximum Sampling Rate | 96kHz |
| AES3 Input Support | Supported |
| AES3 Output Support | Supported |
| Serial Digital Audio Input Support | Supported |
| Serial Digital Audio Output Support | Supported |
| Microcontroller Control Interface | 4-wire interface |
| 封裝 | 28-pin SOIC |
| 安裝類型 | Surface mount |
CS8427-CSZ 28-pin soic 腳位配置指南
CS8427-CSZ(28-pin soic 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: CS8427-CSZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
CS8427-CSZ 適用於 6 應用s: Professional Digital Audio Routing, Digital Mixing Console Interface, Broadcast and Studio Equipment, Digital Amplifier Signal Interface, Digital Audio Format Conversion, Consumer AV and High-Resolution Audio.
Professional Digital Audio Routing
The CS8427-CSZ fits professional audio routing because it handles 2 channels at up to 96kHz while offering AES3 and serial digital audio paths on both the input and output sides. Place the device between equipment with compatible digital interfaces to distribute or redirect audio without converting the signal to analog. The 4-wire microcontroller port allows the host processor to configure operating behavior and synchronize routing decisions with the rest of the system. Engineers should verify source and destination clocking, signal levels, and the exact 28-pin connections from the Cirrus Logic CS8427 datasheet.
推薦
Digital Mixing Console Interface
The CS8427-CSZ can serve as a digital interface section in a mixing-console design requiring a 96kHz, 2-channel exchange with surrounding equipment. Its AES3 paths suit professionally formatted interconnects, while the serial digital audio paths support converters and embedded audio engines. The 4-wire microcontroller port gives the console controller a means to configure the transceiver as part of board initialization. During design, confirm that all connected devices share a compatible clocking arrangement and that the SOIC land pattern and pin assignments match the intended board revision.
推薦
Broadcast and Studio Equipment
For broadcast and studio equipment, the CS8427-CSZ provides a compact digital-audio transceiver function at a defined 96kHz rate. AES3 input and output support enables connection with professional digital equipment, while the serial-audio interfaces add flexibility for converters and internal processing sections. The two-channel organization suits channel-specific processing or auxiliary routing where a high-channel-count matrix would be unnecessary. The 28-pin SOIC package facilitates conventional surface-mount assembly, but clock-domain planning and grounded return paths remain essential for reliable studio installation.
推薦
Digital Amplifier Signal Interface
The CS8427-CSZ can interface a digital amplifier subsystem with a digital-audio source at up to 96kHz. It accepts AES3 or serial digital audio and provides corresponding digital outputs, allowing a system to retain a digital signal path until the point required by the amplifier architecture. The 4-wire control port supports firmware-controlled configuration within the broader audio system. Because the transceiver does not itself perform analog amplification, designers must separately validate output formatting, channel alignment, clocks, and the required inter-device synchronization.
推薦
Digital Audio Format Conversion
The CS8427-CSZ is appropriate for equipment that must exchange digital audio between AES3 and serial digital audio interfaces. Its 2-channel, 96kHz capability provides a defined operating point for converters, format routers, and embedded audio products. The bidirectional interface arrangement reduces the number of separate digital-audio devices required when both source and destination equipment use different formats. The control port allows system firmware to initialize and manage the device, although signal-format details, clocking, and channel mapping must be established from the manufacturer register and pin documentation.
推薦
Consumer AV and High-Resolution Audio
The CS8427-CSZ can support high-resolution consumer AV products that require digital-audio routing at up to 96kHz. Its 96kHz rate exceeds the 48kHz common in many conventional consumer systems, while AES3 and serial digital audio paths provide interface options for source devices, amplifiers, and converters. The 2-channel format suits stereo products where multichannel routing is unnecessary. Firmware can use the 4-wire microcontroller port for controlled startup and configuration, helping the product maintain a deterministic digital-audio path across its operating states.
推薦
推薦產品摘要
工程參考資料,適用於 CS8427-CSZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Cirrus Logic |
| Package | 28-pin SOIC |
| Product Type | 96kHz stereo digital audio interface transceiver |
| Channel Count | 2 channels |
| Maximum Sampling Rate | 96kHz |
| AES3 Input | Supported |
| AES3 Output | Supported |
| Serial Digital Audio Input | Supported |
| Serial Digital Audio Output | Supported |
| Control Interface | 4-wire microcontroller port |
主要差異化特點
- Bidirectional AES3 and serial-audio interface coverage (對比TDA1541)
- Integrated four-wire device control (對比TDA1541)
- Defined 28-pin SOIC implementation (對比TDA1541)
設計說明
Assign every connection directly from the Cirrus Logic CS8427 datasheet pin-description table. Keep digital-audio data and clock routing short, avoid sharing narrow paths with unrelated high-current signals, and provide a continuous ground reference beneath and around the device. The 28-pin SOIC footprint must match the selected CSZ package variant, while supply and ground pins should be connected according to the recommended layout and decoupling guidance.
Treat clock, frame, and data routes as a related timing system rather than ordinary low-speed digital signals. Confirm source impedance, termination, trace length, and grounding against the interface requirements in the manufacturer datasheet. A 96kHz sample rate does not by itself define the maximum clock frequency, so use the documented timing limits and interface implementation recommendations when selecting buffers or drivers.
Do not substitute a functionally similar digital-audio receiver for the CS8427-CSZ without proving pin compatibility. The cross-reference mention of a TDA1541 indicates functional overlap only; it does not establish the same 28-pin SOIC footprint, AES3 and serial-I/O complement, 96kHz rating, or control interface. Compare the full pin table, supply limits, clock architecture, and register behavior before approving any replacement.
Separate clock and data routing from noisy power-converter paths, and use solid ground planes with carefully placed return connections. If AES3 and serial audio paths coexist, route them to maintain the relationship specified for each interface rather than assuming they are electrically interchangeable. Validate the completed layout for timing margin across all supported channel, sampling-rate, and operating modes used by the product.
合規資訊
The product information identifies a digital audio interface transceiver; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was found.