Cirrus Logic Inc.

CS8427-CSZ - 96kHz Stereo Audio Transceiver | Cirrus Logic

料号: CS8427-CSZ ✓ 量产中
28-pin SOIC Package
最小起订量: 1 |

CS8427-CSZ 概述

The Cirrus Logic CS8427-CSZ is a 96kHz stereo digital audio interface transceiver with 2 channels, AES3 and serial digital audio inputs, AES3 and serial digital audio outputs, and a 28-pin SOIC package. It provides the conversion and control functions needed between professional digital-audio equipment and embedded audio systems.

A digital audio interface transceiver is an interface IC that accepts, conditions, and redistributes digital audio signals while supporting device control and clocking functions. The CS8427 sits within the digital-audio interface hierarchy: AES3 or serial digital audio sources enter the transceiver, internal control registers define operating behavior, and compatible digital-audio destinations receive the processed outputs. Its 96kHz sampling-rate support makes it relevant to consumer, professional, and industrial audio equipment.

The CS8427-CSZ combines two-channel digital audio handling with both AES3 and serial digital audio input and output paths. The four-wire microcontroller port provides comprehensive device control, allowing firmware to configure routing and operating parameters. A 28-pin SOIC package supports conventional surface-mount PCB assembly, while its 96kHz operating rate provides a defined basis for high-resolution audio designs.

The architecture is centered on digital rather than analog signal conversion. AES3-compatible signals provide a standardized digital-audio interface, while serial digital audio I/O supports direct connection to codecs, converters, and other digital audio devices. This distinction is important in professional equipment because digital interfaces can preserve signal integrity over longer interconnects when the clocking and source impedance requirements are satisfied.

Typical uses include surround-sound processing, digital mixing consoles, broadcast and studio equipment, digital amplifiers, audio-format converters, and consumer AV products. The two-channel organization also suits smaller systems requiring bidirectional digital audio routing without the channel count of a larger matrix mixer.

Designers should preserve the pin-specific clock, control, data, and power connections defined in the Cirrus Logic CS8427 datasheet. PCB layout, grounding, and interface signal integrity require particular care because digital-audio timing errors can manifest as clicks, word-boundary errors, or channel synchronization faults even when average data activity appears correct.

This page combines the CS8427-CSZ interface description with verified 96kHz, 2-channel, AES3, serial-audio, control-port, and 28-SOIC characteristics, plus application guidance and engineering-focused design notes that help engineers plan the transceiver within a complete digital-audio signal chain.

直接替换替代料: CS8427-CSZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

CS8427-CSZ 最大额定值与电气特性

Product Type 96kHz stereo digital audio interface transceiver
Channel Count 2 channels
Maximum Sampling Rate 96kHz
AES3 Input Support Supported
AES3 Output Support Supported
Serial Digital Audio Input Support Supported
Serial Digital Audio Output Support Supported
Microcontroller Control Interface 4-wire interface
封装 28-pin SOIC
安装类型 Surface mount

CS8427-CSZ 28-pin soic 引脚配置指南

CS8427-CSZ(28-pin soic 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

CS8427-CSZ 的 28-pin soic 封装引脚图

暂无详细引脚数据: CS8427-CSZ.

请参阅 数据手册 以查看完整引脚配置。

典型应用

CS8427-CSZ 适用于 6 应用s: Professional Digital Audio Routing, Digital Mixing Console Interface, Broadcast and Studio Equipment, Digital Amplifier Signal Interface, Digital Audio Format Conversion, Consumer AV and High-Resolution Audio.

🎧

Professional Digital Audio Routing

The CS8427-CSZ fits professional audio routing because it handles 2 channels at up to 96kHz while offering AES3 and serial digital audio paths on both the input and output sides. Place the device between equipment with compatible digital interfaces to distribute or redirect audio without converting the signal to analog. The 4-wire microcontroller port allows the host processor to configure operating behavior and synchronize routing decisions with the rest of the system. Engineers should verify source and destination clocking, signal levels, and the exact 28-pin connections from the Cirrus Logic CS8427 datasheet.

🎛️

Digital Mixing Console Interface

The CS8427-CSZ can serve as a digital interface section in a mixing-console design requiring a 96kHz, 2-channel exchange with surrounding equipment. Its AES3 paths suit professionally formatted interconnects, while the serial digital audio paths support converters and embedded audio engines. The 4-wire microcontroller port gives the console controller a means to configure the transceiver as part of board initialization. During design, confirm that all connected devices share a compatible clocking arrangement and that the SOIC land pattern and pin assignments match the intended board revision.

📻

Broadcast and Studio Equipment

For broadcast and studio equipment, the CS8427-CSZ provides a compact digital-audio transceiver function at a defined 96kHz rate. AES3 input and output support enables connection with professional digital equipment, while the serial-audio interfaces add flexibility for converters and internal processing sections. The two-channel organization suits channel-specific processing or auxiliary routing where a high-channel-count matrix would be unnecessary. The 28-pin SOIC package facilitates conventional surface-mount assembly, but clock-domain planning and grounded return paths remain essential for reliable studio installation.

🔊

Digital Amplifier Signal Interface

The CS8427-CSZ can interface a digital amplifier subsystem with a digital-audio source at up to 96kHz. It accepts AES3 or serial digital audio and provides corresponding digital outputs, allowing a system to retain a digital signal path until the point required by the amplifier architecture. The 4-wire control port supports firmware-controlled configuration within the broader audio system. Because the transceiver does not itself perform analog amplification, designers must separately validate output formatting, channel alignment, clocks, and the required inter-device synchronization.

🔄

Digital Audio Format Conversion

The CS8427-CSZ is appropriate for equipment that must exchange digital audio between AES3 and serial digital audio interfaces. Its 2-channel, 96kHz capability provides a defined operating point for converters, format routers, and embedded audio products. The bidirectional interface arrangement reduces the number of separate digital-audio devices required when both source and destination equipment use different formats. The control port allows system firmware to initialize and manage the device, although signal-format details, clocking, and channel mapping must be established from the manufacturer register and pin documentation.

📺

Consumer AV and High-Resolution Audio

The CS8427-CSZ can support high-resolution consumer AV products that require digital-audio routing at up to 96kHz. Its 96kHz rate exceeds the 48kHz common in many conventional consumer systems, while AES3 and serial digital audio paths provide interface options for source devices, amplifiers, and converters. The 2-channel format suits stereo products where multichannel routing is unnecessary. Firmware can use the 4-wire microcontroller port for controlled startup and configuration, helping the product maintain a deterministic digital-audio path across its operating states.

What is the CS8427-CSZ?
The CS8427-CSZ is a 96kHz, 2-channel stereo digital audio interface transceiver from Cirrus Logic. It supports AES3 and serial digital audio inputs, AES3 and serial digital audio outputs, and a 4-wire microcontroller control port. According to the Cirrus Logic CS8427 datasheet, the device is intended for professional digital-audio routing and control applications and is packaged in a 28-pin SOIC.
What are the key specifications of CS8427-CSZ that engineers should know?
The key CS8427-CSZ specifications are a 96kHz sampling rate, 2-channel operation, AES3 input and output, serial digital audio input and output, a 4-wire microcontroller port, and a 28-pin SOIC package. The Cirrus Logic CS8427 datasheet identifies the device as a stereo digital audio interface transceiver, making it suitable for audio routing, conversion, and equipment-control designs.
What audio interfaces does the CS8427-CSZ support?
The CS8427-CSZ supports AES3 and serial digital audio on both the input and output sides. This dual-format capability allows one transceiver to interface professional digital-audio sources with serial-audio devices such as converters and codecs. The Cirrus Logic CS8427 datasheet identifies AES3 inputs, serial digital audio inputs, AES3 outputs, and serial digital audio outputs as core device functions.
Where can I download the CS8427-CSZ datasheet PDF?
The CS8427-CSZ datasheet PDF can be reached through the Cirrus Logic CS8427 documentation page linked in the product resources for this MPN. The manufacturer datasheet is the authoritative document for the 96kHz operating rate, 2-channel architecture, AES3 and serial-audio interfaces, 4-wire control port, 28-pin SOIC connections, and register implementation.
Where can I find the CS8427-CSZ pinout?
The CS8427-CSZ pin assignments are shown in the pin-description section and package drawing of the Cirrus Logic CS8427 datasheet. The component uses a 28-pin SOIC, so every physical connection should be assigned from that table before PCB routing. Use the manufacturer pin-description table when identifying data, clock, control, supply, and ground connections.
Is the CS8427-CSZ suitable for surround-sound and professional audio equipment?
The CS8427-CSZ is suitable for professional and surround-audio interfaces that operate at 96kHz and require digital signal routing or conversion. Its AES3 paths address professional digital-audio connections, while its serial paths support embedded audio devices. The 2-channel architecture is particularly useful where a larger channel matrix would add unnecessary complexity.
How is the CS8427-CSZ controlled by a microcontroller?
The CS8427-CSZ is controlled through a 4-wire microcontroller port that provides comprehensive device-control capability. Firmware can use the documented register interface to configure the transceiver and coordinate its audio behavior with the surrounding system. The Cirrus Logic CS8427 datasheet defines the electrical behavior of the control interface and the applicable configuration registers.
What can replace the CS8427-CSZ?
A valid replacement for the CS8427-CSZ must provide the same 28-pin SOIC footprint, pin-to-pin assignments, 96kHz capability, AES3 and serial-audio functions, and compatible control behavior. No independently confirmed drop-in equivalent is established for this exact ordering code. Treat a same-family ordering variant as a replacement candidate only after checking its package suffix, pin table, electrical limits, and register map.
Is the CS8427-CSZ the same as the CS8427-CSR?
The CS8427-CSZ and CS8427-CSR should not be treated as automatically interchangeable until their package and ordering suffixes are compared against the manufacturer documentation. The CS8427-CSZ is listed in a 28-pin SOIC package, but a suffix change can alter the package or delivery format. Confirm the exact package drawing, pinout, temperature grade, and lifecycle status before considering it a drop-in replacement.
Where can I buy CS8427-CSZ online?
The Request a Quote form on this page is the appropriate route for requesting CS8427-CSZ commercial availability, current lead time, and order handling. The product is a 96kHz, 2-channel digital audio interface transceiver in a 28-pin SOIC package. A written quote can also confirm the exact suffix, delivery packaging, and quantity needed for the intended production run.
What is the price of CS8427-CSZ?
Use the Request a Quote form on this page for the current commercial terms for the CS8427-CSZ. The device is identified as a 96kHz, 2-channel digital audio interface transceiver with AES3 and serial-audio I/O in a 28-pin SOIC package. A quote provides current pricing together with quantity, lead-time, and exact-ordering-code confirmation.
What is the lead time for CS8427-CSZ?
Request the current CS8427-CSZ lead time through the Request a Quote form on this page. Lead time can depend on the exact package suffix, production quantity, and current factory scheduling. The confirmed commercial response should also establish minimum order quantity and the standard delivery format for the 28-pin SOIC device.
Is CS8427-CSZ in stock?
Current CS8427-CSZ stock status should be confirmed through the Request a Quote form on this page. Inventory can change with order volume and the exact ordering suffix, so a general catalog listing does not establish a firm allocation. Ask the supplier to confirm stock, manufacturing lead time, package form, and delivery date for the required quantity.
CS8427-CSZ vs CS8420-CSZ - which is better for digital audio routing?
Choose the CS8427-CSZ when the design requires a 96kHz stereo interface with AES3 and serial digital audio inputs and outputs plus a 4-wire microcontroller port. Choose the CS8420-CSZ when its documented channel count, clock architecture, and I/O mix better match the source equipment. Because both are Cirrus Logic interface ICs, compare their complete pinouts and register functions rather than assuming interchangeability.
What is the difference between CS8427-CSZ and CS8427-CSZR?
The CS8427-CSZR is identified in cross-reference results as a suffix variant of the CS8427, while the CS8427-CSZ is explicitly listed in a 28-pin SOIC package. A suffix difference can represent reel or tape-and-reel ordering rather than an electrical change, but that must be confirmed from the manufacturer ordering guide. Verify package temperature grade and reel quantity before treating it as interchangeable.
When should I choose the CS8427-CSZ over another digital audio transceiver?
Choose the CS8427-CSZ when a two-channel digital audio path must operate at 96kHz and support both AES3 and serial digital audio in each direction, with configuration through a 4-wire microcontroller port. Retain another transceiver when it provides a required channel count, clock mode, electrical standard, pin arrangement, or package size. The Cirrus Logic CS8427 datasheet should be the basis for the final interface comparison.
Is there a Texas Instruments drop-in equivalent for the CS8427-CSZ?
No Texas Instruments part can be confirmed as a pin-compatible drop-in replacement for the CS8427-CSZ from the available cross-reference information. A TDA1541 may provide digital-audio functionality, but functional similarity does not establish the required 28-pin SOIC footprint, AES3 and serial-I/O parity, 96kHz operation, or compatible control interface. Board replacement requires full electrical and pin-level validation.
Does the CS8427-CSZ support 96kHz digital audio?
Yes, the CS8427-CSZ supports digital audio operation up to 96kHz. It is a 2-channel stereo digital audio interface transceiver with AES3 and serial digital audio inputs and outputs. The 96kHz rate makes it applicable to professional audio, broadcast, studio, digital amplification, and high-resolution consumer equipment that uses compatible digital interfaces.

工程参考数据: CS8427-CSZ ——对比、设计指导和合规信息。

选型指南

Choose the CS8427-CSZ when the system requires a 2-channel digital audio transceiver operating up to 96kHz with both AES3 and serial digital audio inputs and outputs, plus a 4-wire microcontroller port. It is especially suitable for professional-audio routing, broadcast equipment, digital amplifiers, format converters, and high-resolution stereo products. Choose CS8420-CSZ when its documented channel count, clocking, and I/O arrangement align more closely with the target system, and choose CS8416-DNZ when its specific interface functions meet the design. Do not choose the TDA1541 as a direct board replacement solely because both products handle digital audio; its package, pinout, AES3 and serial-interface coverage, 96kHz behavior, and control compatibility must be demonstrated. For every candidate, verify the manufacturer pin table, supply requirements, timing limits, register map, and package drawing.

与替代料对比

参数 本产品
Brand Cirrus Logic
Package 28-pin SOIC
Product Type 96kHz stereo digital audio interface transceiver
Channel Count 2 channels
Maximum Sampling Rate 96kHz
AES3 Input Supported
AES3 Output Supported
Serial Digital Audio Input Supported
Serial Digital Audio Output Supported
Control Interface 4-wire microcontroller port

关键差异点

  • Bidirectional AES3 and serial-audio interface coverage (对比 TDA1541)
  • Integrated four-wire device control (对比 TDA1541)
  • Defined 28-pin SOIC implementation (对比 TDA1541)

设计说明

Assign every connection directly from the Cirrus Logic CS8427 datasheet pin-description table. Keep digital-audio data and clock routing short, avoid sharing narrow paths with unrelated high-current signals, and provide a continuous ground reference beneath and around the device. The 28-pin SOIC footprint must match the selected CSZ package variant, while supply and ground pins should be connected according to the recommended layout and decoupling guidance.

Treat clock, frame, and data routes as a related timing system rather than ordinary low-speed digital signals. Confirm source impedance, termination, trace length, and grounding against the interface requirements in the manufacturer datasheet. A 96kHz sample rate does not by itself define the maximum clock frequency, so use the documented timing limits and interface implementation recommendations when selecting buffers or drivers.

Do not substitute a functionally similar digital-audio receiver for the CS8427-CSZ without proving pin compatibility. The cross-reference mention of a TDA1541 indicates functional overlap only; it does not establish the same 28-pin SOIC footprint, AES3 and serial-I/O complement, 96kHz rating, or control interface. Compare the full pin table, supply limits, clock architecture, and register behavior before approving any replacement.

Separate clock and data routing from noisy power-converter paths, and use solid ground planes with carefully placed return connections. If AES3 and serial audio paths coexist, route them to maintain the relationship specified for each interface rather than assuming they are electrically interchangeable. Validate the completed layout for timing margin across all supported channel, sampling-rate, and operating modes used by the product.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The product information identifies a digital audio interface transceiver; no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was found.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

cs8427 csz cs8427 datasheet CS8427-CSZ datasheet pdf CS8427-CSZ pinout CS8427-CSZ equivalent CS8427-CSZ replacement CS8427-CSZ cross reference CS8427-CSZ vs CS8420-CSZ CS8427-CSZ price CS8427-CSZ stock Cirrus Logic CS8427-CSZ CS8427-CSZ 28-SOIC pinout

相关元器件 & 术语

Cirrus Logic CS8427-CSZ CS8427 CS8420-CSZ CS8416-DNZ TDA1541 digital audio transceiver digital audio interface stereo audio interface AES3 serial digital audio 4-wire microcontroller port 96kHz sample rate 2-channel audio 28-pin SOIC SOIC package family surface-mount package digital audio routing broadcast audio studio equipment digital amplifier audio format conversion consumer AV professional audio
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情