DG418AK - 35Ω SPST CMOS Analog Switch | Vishay
MPN: DG418AK ✗ 停產DG418AK 概覽
An analog switch is an integrated semiconductor device that routes an electrical signal between circuit nodes under digital control. The DG418AK belongs to the analog-switch hierarchy, where its SPST configuration provides one independently controlled connection path. Unlike a mechanical relay, it changes state electronically and can operate within systems that require compact signal-routing devices with CMOS-compatible control logic.
The switch features a nominal 35 ohm on-resistance and switching times of 175 ns for turn-on and 145 ns for turn-off. It is specified for a 15 V analog-signal range and uses TTL- and CMOS-compatible control signals. The -55°C to +125°C temperature range makes the part suitable for industrial, instrumentation, communications, and temperature-extended signal-conditioning equipment when the complete circuit meets its environmental requirements.
Internally, the DG418AK is a precision monolithic CMOS analog switch designed to minimize resistance variation across the operating signal range. The DG418 family is associated with guaranteed on-resistance matching and flatness characteristics, which help preserve amplitude accuracy when signals pass through the switch. Its bidirectional signal path supports use in input selection, output isolation, test-signal routing, and sampled measurement systems.
Typical applications include precision test and measurement systems, data-acquisition front ends, analog signal multiplexing, sensor conditioning, communications equipment, and industrial control modules. A designer can use the DG418AK when a single SPST path is sufficient and the signal amplitude remains within the supported range. The 175 ns turn-on time and 145 ns turn-off time are suitable for moderate-speed routing rather than very high-frequency applications.
For layout, keep analog traces short and provide a low-impedance return path to minimize coupling from adjacent digital or switching circuits. Confirm the logic levels against the device control-input thresholds, review leakage across the full temperature range, and ensure the switched signal remains within the stated analog-signal range. The manufacturer datasheet pin description should be used directly when assigning PCB connections.
This page combines the exact DG418AK device characteristics, commercial sourcing guidance, related precision-switch options, and practical design considerations. It helps engineers evaluate the DG418AK for high-temperature and precision-routing designs while distinguishing verified drop-in candidates from alternatives that require a different package or PCB footprint.
直接替換替代品,適用於 DG418AK — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
DG418AK/883
✅ 直接替換📋 參考替代品(不在目錄中)
DG418AK 最大額定值與電氣特性
| Switch Type | SPST |
| Number of Channels | 1 channel |
| Number of Circuits | 1 circuit |
| On-Resistance | 35 ohm |
| Supply Voltage Range | -15 V to +15 V |
| Analog Signal Range | Up to 15 V |
| Turn-On Time | 175 ns |
| Turn-Off Time | 145 ns |
| 工作溫度範圍 | -55°C to +125°C |
| Logic Family | CMOS |
| Logic Compatibility | TTL and CMOS compatible |
| Package Type | CERDIP-8 |
| 腳位數 | 8 pins |
| 安裝類型 | Through-hole |
| Low Power Consumption | 35 nW |
| Temperature Grade | Military |
DG418AK cerdip-8 腳位配置指南
DG418AK(cerdip-8 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DG418AK.
請參閱 資料表 以查看完整腳位配置。
典型應用
DG418AK 適用於 6 應用s: Precision Data-Acquisition Front Ends, Automated Test and Measurement Systems, Sensor Signal Conditioning, Industrial Control Signal Routing, Communications Signal Path Switching, Temperature-Extended Instrument Modules.
Precision Data-Acquisition Front Ends
The DG418AK suits precision data-acquisition front ends requiring one controllable analog path. Its 35 ohm on-resistance provides a defined series impedance, while 175 ns turn-on and 145 ns turn-off times support rapid acquisition sequences. The -55°C to +125°C operating range allows use in temperature-extended measurement systems. When selecting the input resistor, amplifier gain, and capacitor network, account for the switch resistance and leakage so that the complete front end meets its accuracy target.
推薦
Automated Test and Measurement Systems
The DG418AK can route test signals in automated measurement systems where a single SPST connection is sufficient. Its 35 ohm on-resistance limits signal loss in the closed state, and its 145 ns turn-off time supports fast settling between measurement paths. The 8-pin CERDIP construction also suits through-hole instrument modules. Use the pin-description table for wiring and verify that source impedance, bandwidth, and settling requirements remain acceptable after adding the switch impedance.
推薦
Sensor Signal Conditioning
The DG418AK is useful for switching sensor signals into a shared amplifier or measurement channel. A 35 ohm on-resistance is practical when the source impedance is sufficiently low, and the fast 175 ns turn-on time reduces interruption time during channel selection. For high-impedance sensors, leakage and input bias current can dominate error, so validate those characteristics across the full -55°C to +125°C range and consider guarding around sensitive traces.
推薦
Industrial Control Signal Routing
The DG418AK can isolate and route control or feedback signals in industrial equipment. Its -15 V to +15 V supply range and -55°C to +125°C operating range align with extended-temperature environments, while TTL- and CMOS-compatible control supports conventional logic families. Confirm the control-input thresholds in the datasheet and provide suitable bypassing on the supply pins. Keep switched traces away from high-energy motor or relay wiring to reduce coupling into the precision CMOS switch.
推薦
Communications Signal Path Switching
The DG418AK can provide low-frequency signal isolation or a bypass path in communications equipment. Its specified 175 ns turn-on and 145 ns turn-off times support faster routing than many mechanical approaches, while the 35 ohm on-resistance must be included in the channel loss budget. The 15 V analog-signal range provides useful headroom for many bipolar signals. Validate insertion loss, capacitance, isolation, and crosstalk against the system bandwidth before using it in high-frequency paths.
推薦
Temperature-Extended Instrument Modules
The DG418AK is appropriate for through-hole instrument modules that require operation from -55°C to +125°C. Its 8-pin CERDIP package supports conventional through-hole assembly, and the 35 ohm SPST switch provides a controlled connection path for low-to-moderate-bandwidth signals. Review derating, lead strain, contamination, and solder-joint integrity for ruggedized equipment. The switching specifications, leakage, and control thresholds must be evaluated across the complete environmental range rather than at room temperature alone.
推薦
推薦產品摘要
工程參考資料,適用於 DG418AK — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DG418AK/883 |
|---|---|---|
| Brand | Vishay Intertechnology | Vishay Intertechnology |
| Package | 8-pin CERDIP | 8-pin CERDIP - same |
| Switch Type | SPST | SPST |
| Number of Channels | 1 channel | 1 channel |
| On-Resistance | 35 ohm | 35 ohm |
| Supply Voltage Range | -15 V to +15 V | -15 V to +15 V |
| Turn-On Time | 175 ns | 175 ns |
| Turn-Off Time | 145 ns | 145 ns |
| Operating Temperature | -55°C to +125°C | -55°C to +125°C |
| Logic Compatibility | TTL and CMOS compatible | TTL and CMOS compatible |
主要差異化特點
- Temperature-extended CERDIP implementation (對比DG418DJ+)
- Exact military-grade orderable option (對比DG418AK)
- Defined high-speed switching performance (對比DG408DY+)
設計說明
Route the switched analog node as a short, direct trace between the DG418AK and its source or destination. Place the component near the protected signal path rather than at a distant connector, because lead and trace resistance add to the specified 35 ohm on-resistance. Use a continuous ground reference beneath the analog route where the PCB construction permits, and avoid sharing high-current return paths with sensitive sensor wiring.
Include the switch's 35 ohm on-resistance in the complete channel-impedance calculation rather than treating the DG418AK as a zero-ohm connection. For source impedances much lower than 35 ohm, the resistance can create a divider with the following amplifier input. Also evaluate switch capacitance, leakage, and the 175 ns turn-on time when the target bandwidth or settling window is short; the switching-speed figure alone does not guarantee complete system settling.
Do not substitute DG418DJ+ or DG418CY+ directly on an existing DG418AK board. The cross-reference records identify different packages for those family members, so a change can require new PCB land patterns and a revised assembly process. Confirm the exact suffix, 8-pin CERDIP construction, control thresholds, analog-signal range, temperature grade, and qualification documentation before approving a substitution.
Bypass the DG418AK supply pins with a short return path to the quietest available ground reference. Place the bypass capacitor close to the device and avoid routing supply current through the analog signal ground. The supported -15 V to +15 V range applies to the device's specified operating conditions; control and switched-signal voltages must remain within the corresponding limits shown in the manufacturer datasheet.
合規資訊
The DG418AK is a military-temperature analog switch rather than an automotive device, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the referenced device records.