Vishay Intertechnology

DG418AK - 35Ω SPST CMOS Analog Switch | Vishay

부품 번호: DG418AK ✗ 단종
-15 V to +15 V Vdss 35 ohm Rds(on) CERDIP-8 Package
MOQ: 1 |

DG418AK 개요

The Vishay DG418AK is a single-channel, single-pole single-throw CMOS analog switch with a 35 ohm on-resistance, housed in an 8-pin CERDIP package. It supports a -15 V to +15 V supply-voltage range and is specified for operation from -55°C to +125°C. The DG418AK is designed for precision analog-signal routing where low leakage, repeatable switching, and a stable low on-resistance are important.

An analog switch is an integrated semiconductor device that routes an electrical signal between circuit nodes under digital control. The DG418AK belongs to the analog-switch hierarchy, where its SPST configuration provides one independently controlled connection path. Unlike a mechanical relay, it changes state electronically and can operate within systems that require compact signal-routing devices with CMOS-compatible control logic.

The switch features a nominal 35 ohm on-resistance and switching times of 175 ns for turn-on and 145 ns for turn-off. It is specified for a 15 V analog-signal range and uses TTL- and CMOS-compatible control signals. The -55°C to +125°C temperature range makes the part suitable for industrial, instrumentation, communications, and temperature-extended signal-conditioning equipment when the complete circuit meets its environmental requirements.

Internally, the DG418AK is a precision monolithic CMOS analog switch designed to minimize resistance variation across the operating signal range. The DG418 family is associated with guaranteed on-resistance matching and flatness characteristics, which help preserve amplitude accuracy when signals pass through the switch. Its bidirectional signal path supports use in input selection, output isolation, test-signal routing, and sampled measurement systems.

Typical applications include precision test and measurement systems, data-acquisition front ends, analog signal multiplexing, sensor conditioning, communications equipment, and industrial control modules. A designer can use the DG418AK when a single SPST path is sufficient and the signal amplitude remains within the supported range. The 175 ns turn-on time and 145 ns turn-off time are suitable for moderate-speed routing rather than very high-frequency applications.

For layout, keep analog traces short and provide a low-impedance return path to minimize coupling from adjacent digital or switching circuits. Confirm the logic levels against the device control-input thresholds, review leakage across the full temperature range, and ensure the switched signal remains within the stated analog-signal range. The manufacturer datasheet pin description should be used directly when assigning PCB connections.

This page combines the exact DG418AK device characteristics, commercial sourcing guidance, related precision-switch options, and practical design considerations. It helps engineers evaluate the DG418AK for high-temperature and precision-routing designs while distinguishing verified drop-in candidates from alternatives that require a different package or PCB footprint.

드롭인 대체품: DG418AK — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

DG418AK/883

✅ 드롭인
📦 8-pin CERDIP
Military-grade ordering designation; retains the same SPST function, -15 V to +15 V supply range, 35 ohm on-resistance, and 8-pin CERDIP package

📋 참조 대체품 (카탈로그에 없음)

DG418AK 최대 정격 & 전기적 특성

Switch Type SPST
Number of Channels 1 channel
Number of Circuits 1 circuit
On-Resistance 35 ohm
Supply Voltage Range -15 V to +15 V
Analog Signal Range Up to 15 V
Turn-On Time 175 ns
Turn-Off Time 145 ns
동작 온도 범위 -55°C to +125°C
Logic Family CMOS
Logic Compatibility TTL and CMOS compatible
Package Type CERDIP-8
핀 수 8 pins
실장 유형 Through-hole
Low Power Consumption 35 nW
Temperature Grade Military

DG418AK cerdip-8 핀 구성 가이드

DG418AK(cerdip-8 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

DG418AK의 cerdip-8 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: DG418AK.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

DG418AK 적합 용도: 6 애플리케이션s: Precision Data-Acquisition Front Ends, Automated Test and Measurement Systems, Sensor Signal Conditioning, Industrial Control Signal Routing, Communications Signal Path Switching, Temperature-Extended Instrument Modules.

📈

Precision Data-Acquisition Front Ends

The DG418AK suits precision data-acquisition front ends requiring one controllable analog path. Its 35 ohm on-resistance provides a defined series impedance, while 175 ns turn-on and 145 ns turn-off times support rapid acquisition sequences. The -55°C to +125°C operating range allows use in temperature-extended measurement systems. When selecting the input resistor, amplifier gain, and capacitor network, account for the switch resistance and leakage so that the complete front end meets its accuracy target.

🔧

Automated Test and Measurement Systems

The DG418AK can route test signals in automated measurement systems where a single SPST connection is sufficient. Its 35 ohm on-resistance limits signal loss in the closed state, and its 145 ns turn-off time supports fast settling between measurement paths. The 8-pin CERDIP construction also suits through-hole instrument modules. Use the pin-description table for wiring and verify that source impedance, bandwidth, and settling requirements remain acceptable after adding the switch impedance.

🧩

Sensor Signal Conditioning

The DG418AK is useful for switching sensor signals into a shared amplifier or measurement channel. A 35 ohm on-resistance is practical when the source impedance is sufficiently low, and the fast 175 ns turn-on time reduces interruption time during channel selection. For high-impedance sensors, leakage and input bias current can dominate error, so validate those characteristics across the full -55°C to +125°C range and consider guarding around sensitive traces.

🏭

Industrial Control Signal Routing

The DG418AK can isolate and route control or feedback signals in industrial equipment. Its -15 V to +15 V supply range and -55°C to +125°C operating range align with extended-temperature environments, while TTL- and CMOS-compatible control supports conventional logic families. Confirm the control-input thresholds in the datasheet and provide suitable bypassing on the supply pins. Keep switched traces away from high-energy motor or relay wiring to reduce coupling into the precision CMOS switch.

🌐

Communications Signal Path Switching

The DG418AK can provide low-frequency signal isolation or a bypass path in communications equipment. Its specified 175 ns turn-on and 145 ns turn-off times support faster routing than many mechanical approaches, while the 35 ohm on-resistance must be included in the channel loss budget. The 15 V analog-signal range provides useful headroom for many bipolar signals. Validate insertion loss, capacitance, isolation, and crosstalk against the system bandwidth before using it in high-frequency paths.

✈️

Temperature-Extended Instrument Modules

The DG418AK is appropriate for through-hole instrument modules that require operation from -55°C to +125°C. Its 8-pin CERDIP package supports conventional through-hole assembly, and the 35 ohm SPST switch provides a controlled connection path for low-to-moderate-bandwidth signals. Review derating, lead strain, contamination, and solder-joint integrity for ruggedized equipment. The switching specifications, leakage, and control thresholds must be evaluated across the complete environmental range rather than at room temperature alone.

What is the DG418AK?
The DG418AK is a single-channel, single-pole single-throw CMOS analog switch in an 8-pin CERDIP package. According to the Vishay DG418 datasheet, it has a 35 ohm on-resistance, a -15 V to +15 V supply range, and switching times of 175 ns for turn-on and 145 ns for turn-off. It is intended for precision analog-signal routing across industrial and military temperature ranges.
What are the key specifications of DG418AK that engineers should know?
The DG418AK combines one SPST channel, 35 ohm on-resistance, and -15 V to +15 V supply operation in an 8-pin CERDIP package. The Vishay DG418 datasheet specifies 175 ns turn-on, 145 ns turn-off, TTL- and CMOS-compatible control, and operation from -55°C to +125°C. These characteristics make it suitable for precision routing, signal isolation, and measurement systems.
What is the operating voltage range of DG418AK?
The DG418AK operates from -15 V to +15 V. The Vishay DG418 datasheet also identifies an analog-signal range of up to 15 V, which describes the supported signal excursion rather than the logic supply requirement. Board-level designs should keep the switched signal and control levels within those operating limits while accounting for transients and supply sequencing.
Where can I download the DG418AK datasheet PDF?
The DG418AK datasheet is available through the Vishay DG418 family document linked on this page. According to the manufacturer datasheet, the device is a precision monolithic CMOS SPST switch with a 35 ohm on-resistance, 175 ns turn-on time, 145 ns turn-off time, and an operating-temperature range of -55°C to +125°C. Use the family pin table and electrical-characteristics curves for PCB implementation.
Where can I find the DG418AK pinout?
The DG418AK pin assignment is published in the DG418 family pin-description table. The device uses an 8-pin CERDIP package with through-hole mounting. For a new design, assign every connection directly from that table and identify the control input, supply pins, common terminal, and switched terminal before laying out the PCB. Do not infer the pin functions from the DG418 surface-mount variants.
How fast is the DG418AK?
The DG418AK has a specified turn-on time of 175 ns and a turn-off time of 145 ns. According to the Vishay DG418 datasheet, these values describe the switching behavior of the single SPST channel. They support fast analog routing in data-acquisition and test systems, although applications requiring substantially higher bandwidth should be evaluated against the complete switch impedance and off-state characteristics.
Is the DG418AK suitable for high-temperature instrumentation?
The DG418AK is specified for operation from -55°C to +125°C, making it appropriate for temperature-extended instrumentation, industrial control, and military-style equipment. According to the Vishay DG418 datasheet, the device is a CMOS analog switch with a 35 ohm on-resistance. The surrounding circuit, interconnects, connector, and calibration method must also be rated for the intended ambient temperature.
Where can I buy DG418AK and check current availability?
Use the Request a Quote form on this page to request DG418AK availability, current lead time, order quantity, and package quantities. The DG418AK is identified as an 8-pin CERDIP, 35 ohm, single-channel SPST switch. A written quotation is preferable for production planning because availability and lead time can change without notice.
What is the price of DG418AK?
Current DG418AK pricing depends on quantity, package configuration, and supply status. Submit the required quantity and target package through the Request a Quote form on this page for a current offer. The DG418AK is an 8-CERDIP, 35 ohm, one-channel SPST CMOS analog switch, so confirm that the quoted line item carries the exact DG418AK suffix.
What is the lead time for DG418AK?
Current DG418AK lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, production schedule, and acceptable ship-to location in the request. For planning, the device is an 8-pin CERDIP analog switch rated for -55°C to +125°C, and the manufacturer suffix AK identifies the specific ordering configuration.
Is DG418AK in stock?
DG418AK stock status should be checked through the Request a Quote form on this page because inventory changes with order volume and procurement timing. Provide the quantity and required delivery date for the 8-pin CERDIP device. This request can confirm current availability, production allocation, and lead time for the exact DG418AK ordering code.
What can replace DG418AK?
The closest verified drop-in candidate is the military-grade DG418AK/883 in the same 8-pin CERDIP format. The DG418DJ+ and DG418CY+ are related DG418-family devices, but their packages differ and therefore they are not drop-in replacements for a DG418AK PCB. Check control logic, signal range, temperature grade, leakage, on-resistance, and timing before changing an approved part.
Is DG418AK the same as DG418DJ+?
No, the DG418AK and DG418DJ+ are not the same ordering configuration. The DG418AK is specified in an 8-pin CERDIP package, while the cross-reference listing identifies DG418DJ+ as an 8-pin PDIP option. Because the physical package and ordering suffix differ, existing DG418AK layouts should not be treated as directly reusable without a package-level engineering review.
DG418AK vs DG418AK/883 — which is better for a military design?
The DG418AK/883 is the more explicit choice when procurement documentation requires the military-grade DG418AK/883 designation and its associated 8-pin CERDIP ordering code. The standard DG418AK is also listed for -55°C to +125°C operation. Compare the exact manufacturer orderable codes, screening documentation, supply configuration, and program-specific qualification requirements before selecting.
When should I choose DG418AK instead of a surface-mount DG418 variant?
Choose DG418AK when the existing design requires an 8-pin CERDIP footprint, a -55°C to +125°C operating range, and a single 35 ohm SPST path. Surface-mount DG418 variants may simplify board assembly but require a different footprint and pin-layout review. The DG418AK is preferable for through-hole ruggedized or temperature-extended assemblies that have already been qualified around the CERDIP package.
What cross-brand equivalent is available for DG418AK?
No cross-brand, pin-compatible DG418AK equivalent is established by the available cross-reference records. The listed DG418-family alternatives are from Vishay, and the available DG418DJ+ comparison identifies a PDIP package rather than the DG418AK's 8-pin CERDIP package. Because true drop-in alternatives must match the package and pinout, validate any competitor proposal against both mechanical drawings and electrical characteristics before substitution.

엔지니어링 참조 데이터: DG418AK — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the DG418AK when the design specifically requires a single SPST analog switch in an 8-pin CERDIP footprint, a 35 ohm on-resistance, and operation across -55°C to +125°C. It is well suited to precision through-hole instrument modules, industrial signal routing, sensor conditioning, and automated test systems whose source impedance and bandwidth remain compatible with the switch resistance. The DG418AK/883 is the preferred option when the military-grade ordering designation and its associated documentation are required. DG418DJ+ and DG418CY+ are related family options, but the available records identify package differences, making them redesign options rather than true drop-in replacements. For new compact surface-mount products, evaluate an explicitly compatible surface-mount switch rather than attempting to reuse the CERDIP footprint. Before finalizing any choice, verify control thresholds, leakage, off-state behavior, channel capacitance, and the complete signal-path error budget against the manufacturer datasheet.

대체품과의 비교

파라미터 이 제품 DG418AK/883
Brand Vishay Intertechnology Vishay Intertechnology
Package 8-pin CERDIP 8-pin CERDIP - same
Switch Type SPST SPST
Number of Channels 1 channel 1 channel
On-Resistance 35 ohm 35 ohm
Supply Voltage Range -15 V to +15 V -15 V to +15 V
Turn-On Time 175 ns 175 ns
Turn-Off Time 145 ns 145 ns
Operating Temperature -55°C to +125°C -55°C to +125°C
Logic Compatibility TTL and CMOS compatible TTL and CMOS compatible

주요 차별점

  • Temperature-extended CERDIP implementation (vs DG418DJ+)
  • Exact military-grade orderable option (vs DG418AK)
  • Defined high-speed switching performance (vs DG408DY+)

설계 노트

Route the switched analog node as a short, direct trace between the DG418AK and its source or destination. Place the component near the protected signal path rather than at a distant connector, because lead and trace resistance add to the specified 35 ohm on-resistance. Use a continuous ground reference beneath the analog route where the PCB construction permits, and avoid sharing high-current return paths with sensitive sensor wiring.

Include the switch's 35 ohm on-resistance in the complete channel-impedance calculation rather than treating the DG418AK as a zero-ohm connection. For source impedances much lower than 35 ohm, the resistance can create a divider with the following amplifier input. Also evaluate switch capacitance, leakage, and the 175 ns turn-on time when the target bandwidth or settling window is short; the switching-speed figure alone does not guarantee complete system settling.

Do not substitute DG418DJ+ or DG418CY+ directly on an existing DG418AK board. The cross-reference records identify different packages for those family members, so a change can require new PCB land patterns and a revised assembly process. Confirm the exact suffix, 8-pin CERDIP construction, control thresholds, analog-signal range, temperature grade, and qualification documentation before approving a substitution.

Bypass the DG418AK supply pins with a short return path to the quietest available ground reference. Place the bypass capacitor close to the device and avoid routing supply current through the analog signal ground. The supported -15 V to +15 V range applies to the device's specified operating conditions; control and switched-signal voltages must remain within the corresponding limits shown in the manufacturer datasheet.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The DG418AK is a military-temperature analog switch rather than an automotive device, so AEC-Q100 is not applicable. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the referenced device records.

데이터 검증일: 2026-11-10 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

DG418AK datasheet DG418AK specifications DG418AK pinout DG418AK datasheet pdf DG418AK equivalent DG418AK replacement DG418AK cross reference DG418AK vs DG418AK/883 DG418AK 35 ohm SPST switch DG418AK 8-pin CERDIP DG418AK price DG418AK stock Vishay DG418AK analog switch DG418AK application circuit how to replace DG418AK

관련 부품 & 용어

Vishay Intertechnology DG418AK DG418AK/883 DG418DJ+ DG418CY+ DG408DY+ DG419DY+ DG444DJ+ analog switch SPST switch CMOS analog switch precision analog switch interface IC semiconductor on-resistance turn-on time turn-off time TTL-compatible logic CMOS-compatible logic 8-pin CERDIP through-hole package industrial instrumentation sensor signal conditioning data acquisition test and measurement
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기