DP83815DVNG/NOPB - 10/100 Ethernet PCI Controller | Texas Instruments
MPN: DP83815DVNG/NOPB ✗ 停產DP83815DVNG/NOPB 概覽
An integrated PCI Ethernet controller combines network media access control with physical-layer signaling in one semiconductor. The DP83815 occupies the Ethernet controller level within the interface-IC hierarchy, where it bridges a host computer's PCI bus to a 10/100 Mb/s copper Ethernet network. This integration simplifies PC motherboard, network adapter, and embedded-system designs by reducing the number of interface devices required for packet processing and physical signaling.
Key characteristics include 100 Mb/s operation, a 3 V to 3.6 V operating supply range, and a 144-pin LQFP package. The controller supports the PCI V2.2 33 MHz bus interface and host power-management functions. The manufacturer identifies low-cost, high-volume PC motherboards, adapter cards, and embedded systems as primary targets. Its integrated media access controller and PHY reduce board area by eliminating a separate external 10/100 Ethernet PHY.
The DP83815 architecture uses PCI bus mastering to transfer packet descriptors and payload data between the controller and host memory. This approach relieves the host CPU of routine descriptor handling while providing a direct path for network traffic. PCI power-management support enables the interface to participate in system power states, while the 10/100 Mb/s PHY provides copper-network connectivity through 10BASE-T and 100BASE-TX links.
Typical uses include legacy PCI-based PC motherboards, PCI network adapter cards, embedded industrial systems, and other host systems that require 10/100 Mb/s Ethernet. The integrated controller is especially relevant where an established PCI board design must add network connectivity without introducing a separate MAC or PHY. System designers must also account for the controller's 170 mA supply-current specification and its broad 144-pin footprint when planning board area and thermal performance.
A critical design consideration is the distinction between the NOPB ordering code and the electrical behavior of the DP83815 device. The function, supply range, 100 Mb/s data rate, PCI interface, and 144-pin LQFP package remain tied to the named device, while production status and qualification requirements should be reviewed before a new design is released. Existing installations should follow the pin-description table in the manufacturer datasheet when assigning PCB tracks.
This product page combines the manufacturer's functional description with verified distributor specifications, package information, and engineering guidance for PCI Ethernet implementations. It also distinguishes the exact orderable MPN from related DP83815 and DP83816 devices, helping engineers distinguish drop-in compatibility from merely similar Ethernet controllers before committing a PCB or production BOM.
直接替換替代品,適用於 DP83815DVNG/NOPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DP83815DVNG/NOPB (相同外形與佔位) — 差異在於 Ethernet Data Rate, Operating Temperature Range, Package.
DP83815DVNG
✅ 直接替換聯絡詢價
查看資料表 →DP83815DVNG/NOPB 規格
| Product Type | Single-chip 10/100 Mb/s Ethernet controller with integrated PHY |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s |
| Supported Physical Layers | 10BASE-T and 100BASE-TX |
| Host Bus Interface | PCI |
| PCI Specification | PCI V2.2 |
| PCI Bus Clock | 33 MHz |
| 工作電源電壓 | 3 V to 3.6 V |
| 供應電流 | 170 mA |
| 封裝 | 144-LQFP (20 mm x 20 mm) |
| 腳位數 | 144 pins |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | 0 °C to +70 °C |
| Ethernet Standards | IEEE 802.3 and IEEE 802.3u |
| Power Management | PCI power-management support |
| Data Transfer Method | PCI bus mastering |
DP83815DVNG/NOPB 144-lqfp (20 mm x 20 mm) 腳位配置指南
DP83815DVNG/NOPB(144-lqfp (20 mm x 20 mm) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DP83815DVNG/NOPB.
請參閱 資料表 以查看完整腳位配置。
典型應用
DP83815DVNG/NOPB 適用於 6 應用s: PCI-Based PC Motherboards, PCI Network Adapter Cards, Embedded PCI Industrial Systems, Legacy PCI Data Acquisition Equipment, Instrumentation Control Ports, Power-Management-Aware Host Platforms.
PCI-Based PC Motherboards
The DP83815DVNG/NOPB fits a legacy PCI motherboard that requires integrated 10/100 Mb/s Ethernet. Its single-chip implementation combines the PCI media access controller and 10BASE-T/100BASE-TX PHY, avoiding a separate external PHY in the network path. PCI bus mastering transfers packet descriptors and data to host memory, reducing routine CPU involvement. The 144-LQFP package requires careful allocation of board area, while the documented 3 V to 3.6 V supply range and 170 mA specification support conventional 3.3 V rail planning.
推薦
PCI Network Adapter Cards
The DP83815DVNG/NOPB is suitable for a dedicated PCI Ethernet adapter card because it combines network media access control, physical-layer signaling, and PCI host interfacing in one device. A 100 Mb/s link is appropriate for adapter designs targeting 10BASE-T and 100BASE-TX networks. Bus mastering supports efficient descriptor and payload transfer, while the 144-pin LQFP footprint and 20 mm by 20 mm body size must be accommodated during connector and component-placement planning.
推薦
Embedded PCI Industrial Systems
The DP83815DVNG/NOPB can provide Ethernet connectivity in an embedded system that retains a PCI host bus. Its integrated 10/100 Mb/s PHY reduces the external component count, and the PCI V2.2 interface operates at 33 MHz for host communication. Bus mastering limits host-CPU involvement in routine packet movement. Industrial equipment designers should account for the documented 0 °C to +70 °C device temperature range and validate the complete system's thermal and network-isolation requirements.
推薦
Legacy PCI Data Acquisition Equipment
推薦
Instrumentation Control Ports
The DP83815DVNG/NOPB is applicable to PCI-based measurement and control instruments that require a 100 Mb/s Ethernet service port. Integrating the MAC and PHY provides a complete host-to-network interface while preserving the PCI connection already used by the instrument. Bus mastering improves transfer efficiency for descriptors and network payload data. The implementation must follow the manufacturer pinout for proper PCI, clock, reset, transceiver, and supply routing across the 144-terminal LQFP.
推薦
Power-Management-Aware Host Platforms
The DP83815DVNG/NOPB fits systems that require the PCI host interface to participate in platform power management. The manufacturer states that the controller implements PCI power-management support and uses bus mastering to transfer packet descriptors and data. This combination can lower host-processing overhead and support controlled system states. Integration should validate the platform's power-state transitions, wake behavior, PCI reference clocks, and the controller's documented 170 mA supply-current specification.
推薦
工程參考資料,適用於 DP83815DVNG/NOPB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DP83815DVNG |
|---|---|---|
| Device Type | 10/100 Mb/s integrated PCI Ethernet controller | 10/100 Mb/s integrated PCI Ethernet controller |
| Brand | Texas Instruments | Texas Instruments |
| Package | 144-LQFP (20 mm x 20 mm) | 144-LQFP (20 mm x 20 mm) |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s | 10 Mb/s to 100 Mb/s |
| Host Interface | PCI V2.2 at 33 MHz | PCI V2.2 at 33 MHz |
| Physical Layer | Integrated 10BASE-T/100BASE-TX PHY | Integrated 10BASE-T/100BASE-TX PHY |
| Transfer Method | PCI bus mastering | PCI bus mastering |
| Power Management | PCI power-management support | PCI power-management support |
主要差異化特點
- Integrated controller and Ethernet PHY (對比DP83815DVNG)
- Same documented 144-LQFP land pattern (對比DP83815DVNG)
- Host-side bus-mastering design (對比DP83815DVNG)
設計說明
Use the manufacturer pin-description table for all 144 terminals and place the controller so that the 20 mm by 20 mm LQFP can be inspected and soldered using the assembly method already qualified for the product. Keep the PCI interface and Ethernet transceiver routes away from each other where practical. A compact implementation also depends on careful escape routing from the fine-pitch perimeter, so fanout density and test-point access should be reviewed before routing is released.
Estimated: using the documented 170 mA supply current and the top of the 3 V to 3.6 V supply range, the controller's maximum power draw is approximately 0.61 W at 3.6 V. This is an arithmetic upper-bound estimate rather than a datasheet power specification. Apply suitable supply-decoupling and copper-heat-spreading arrangements, then verify actual dissipation across normal operating states and the highest expected network activity.
Do not treat a shared 144-LQFP footprint as proof of complete pin compatibility. Before substituting DP83815DVNG or approving another related controller, compare every pin by name and function, including power, ground, clocks, resets, interrupts, PCI signals, and Ethernet transceiver connections. Also verify device status, package form, temperature range, and firmware or driver expectations; a PCB may fit physically while still failing functional or production requirements.
Route high-speed PCI signals as a controlled-length, continuously referenced group and maintain the topology expected by the manufacturer's application information. Keep the 33 MHz PCI clock away from Ethernet magnetics and analog transceiver routing. Confirm trace impedances, via transitions, decoupling placement, and ground-return continuity in the PCB constraints because the large 144-pin package does not by itself guarantee signal-integrity or EMC performance.
合規資訊
The product information does not explicitly state the requested compliance results. The IEEE 802.3 and IEEE 802.3u references describe Ethernet standards and do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.