DP83815DVNG/NOPB - 10/100 Ethernet PCI Controller | Texas Instruments
MPN: DP83815DVNG/NOPB ✗ Akhir HayatDP83815DVNG/NOPB Ringkasan
An integrated PCI Ethernet controller combines network media access control with physical-layer signaling in one semiconductor. The DP83815 occupies the Ethernet controller level within the interface-IC hierarchy, where it bridges a host computer's PCI bus to a 10/100 Mb/s copper Ethernet network. This integration simplifies PC motherboard, network adapter, and embedded-system designs by reducing the number of interface devices required for packet processing and physical signaling.
Key characteristics include 100 Mb/s operation, a 3 V to 3.6 V operating supply range, and a 144-pin LQFP package. The controller supports the PCI V2.2 33 MHz bus interface and host power-management functions. The manufacturer identifies low-cost, high-volume PC motherboards, adapter cards, and embedded systems as primary targets. Its integrated media access controller and PHY reduce board area by eliminating a separate external 10/100 Ethernet PHY.
The DP83815 architecture uses PCI bus mastering to transfer packet descriptors and payload data between the controller and host memory. This approach relieves the host CPU of routine descriptor handling while providing a direct path for network traffic. PCI power-management support enables the interface to participate in system power states, while the 10/100 Mb/s PHY provides copper-network connectivity through 10BASE-T and 100BASE-TX links.
Typical uses include legacy PCI-based PC motherboards, PCI network adapter cards, embedded industrial systems, and other host systems that require 10/100 Mb/s Ethernet. The integrated controller is especially relevant where an established PCI board design must add network connectivity without introducing a separate MAC or PHY. System designers must also account for the controller's 170 mA supply-current specification and its broad 144-pin footprint when planning board area and thermal performance.
A critical design consideration is the distinction between the NOPB ordering code and the electrical behavior of the DP83815 device. The function, supply range, 100 Mb/s data rate, PCI interface, and 144-pin LQFP package remain tied to the named device, while production status and qualification requirements should be reviewed before a new design is released. Existing installations should follow the pin-description table in the manufacturer datasheet when assigning PCB tracks.
This product page combines the manufacturer's functional description with verified distributor specifications, package information, and engineering guidance for PCI Ethernet implementations. It also distinguishes the exact orderable MPN from related DP83815 and DP83816 devices, helping engineers distinguish drop-in compatibility from merely similar Ethernet controllers before committing a PCB or production BOM.
Pilihan pengganti yang segera untuk DP83815DVNG/NOPB — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera DP83815DVNG/NOPB (sama faktor bentuk dan kaki) — berbeza dalam Ethernet Data Rate, Operating Temperature Range, Package.
DP83815DVNG
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →DP83815DVNG/NOPB Spesifikasi
| Product Type | Single-chip 10/100 Mb/s Ethernet controller with integrated PHY |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s |
| Supported Physical Layers | 10BASE-T and 100BASE-TX |
| Host Bus Interface | PCI |
| PCI Specification | PCI V2.2 |
| PCI Bus Clock | 33 MHz |
| Tegangan Pemberi Arus Operasi | 3 V to 3.6 V |
| Arus Pemberi Arus | 170 mA |
| Kemasan | 144-LQFP (20 mm x 20 mm) |
| Kiraan Pin | 144 pins |
| Jenis Pemasangan | Surface mount |
| Gambaran Suhu Operasi | 0 °C to +70 °C |
| Ethernet Standards | IEEE 802.3 and IEEE 802.3u |
| Power Management | PCI power-management support |
| Data Transfer Method | PCI bus mastering |
Panduan Konfigurasi Pin DP83815DVNG/NOPB 144-lqfp (20 mm x 20 mm)
Konfigurasi pin untuk DP83815DVNG/NOPB (144-lqfp (20 mm x 20 mm) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk DP83815DVNG/NOPB.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
DP83815DVNG/NOPB patut untuk 6 aplikasis: PCI-Based PC Motherboards, PCI Network Adapter Cards, Embedded PCI Industrial Systems, Legacy PCI Data Acquisition Equipment, Instrumentation Control Ports, Power-Management-Aware Host Platforms.
PCI-Based PC Motherboards
The DP83815DVNG/NOPB fits a legacy PCI motherboard that requires integrated 10/100 Mb/s Ethernet. Its single-chip implementation combines the PCI media access controller and 10BASE-T/100BASE-TX PHY, avoiding a separate external PHY in the network path. PCI bus mastering transfers packet descriptors and data to host memory, reducing routine CPU involvement. The 144-LQFP package requires careful allocation of board area, while the documented 3 V to 3.6 V supply range and 170 mA specification support conventional 3.3 V rail planning.
Disebarkan
PCI Network Adapter Cards
The DP83815DVNG/NOPB is suitable for a dedicated PCI Ethernet adapter card because it combines network media access control, physical-layer signaling, and PCI host interfacing in one device. A 100 Mb/s link is appropriate for adapter designs targeting 10BASE-T and 100BASE-TX networks. Bus mastering supports efficient descriptor and payload transfer, while the 144-pin LQFP footprint and 20 mm by 20 mm body size must be accommodated during connector and component-placement planning.
Disebarkan
Embedded PCI Industrial Systems
The DP83815DVNG/NOPB can provide Ethernet connectivity in an embedded system that retains a PCI host bus. Its integrated 10/100 Mb/s PHY reduces the external component count, and the PCI V2.2 interface operates at 33 MHz for host communication. Bus mastering limits host-CPU involvement in routine packet movement. Industrial equipment designers should account for the documented 0 °C to +70 °C device temperature range and validate the complete system's thermal and network-isolation requirements.
Disebarkan
Legacy PCI Data Acquisition Equipment
Disebarkan
Instrumentation Control Ports
The DP83815DVNG/NOPB is applicable to PCI-based measurement and control instruments that require a 100 Mb/s Ethernet service port. Integrating the MAC and PHY provides a complete host-to-network interface while preserving the PCI connection already used by the instrument. Bus mastering improves transfer efficiency for descriptors and network payload data. The implementation must follow the manufacturer pinout for proper PCI, clock, reset, transceiver, and supply routing across the 144-terminal LQFP.
Disebarkan
Power-Management-Aware Host Platforms
The DP83815DVNG/NOPB fits systems that require the PCI host interface to participate in platform power management. The manufacturer states that the controller implements PCI power-management support and uses bus mastering to transfer packet descriptors and data. This combination can lower host-processing overhead and support controlled system states. Integration should validate the platform's power-state transitions, wake behavior, PCI reference clocks, and the controller's documented 170 mA supply-current specification.
Disebarkan
Data referensi kejuruteraan untuk DP83815DVNG/NOPB — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | DP83815DVNG |
|---|---|---|
| Device Type | 10/100 Mb/s integrated PCI Ethernet controller | 10/100 Mb/s integrated PCI Ethernet controller |
| Brand | Texas Instruments | Texas Instruments |
| Package | 144-LQFP (20 mm x 20 mm) | 144-LQFP (20 mm x 20 mm) |
| Ethernet Data Rate | 10 Mb/s to 100 Mb/s | 10 Mb/s to 100 Mb/s |
| Host Interface | PCI V2.2 at 33 MHz | PCI V2.2 at 33 MHz |
| Physical Layer | Integrated 10BASE-T/100BASE-TX PHY | Integrated 10BASE-T/100BASE-TX PHY |
| Transfer Method | PCI bus mastering | PCI bus mastering |
| Power Management | PCI power-management support | PCI power-management support |
Penyeberangsung Jelas
- Integrated controller and Ethernet PHY (vsDP83815DVNG)
- Same documented 144-LQFP land pattern (vsDP83815DVNG)
- Host-side bus-mastering design (vsDP83815DVNG)
Catatan Desain
Use the manufacturer pin-description table for all 144 terminals and place the controller so that the 20 mm by 20 mm LQFP can be inspected and soldered using the assembly method already qualified for the product. Keep the PCI interface and Ethernet transceiver routes away from each other where practical. A compact implementation also depends on careful escape routing from the fine-pitch perimeter, so fanout density and test-point access should be reviewed before routing is released.
Estimated: using the documented 170 mA supply current and the top of the 3 V to 3.6 V supply range, the controller's maximum power draw is approximately 0.61 W at 3.6 V. This is an arithmetic upper-bound estimate rather than a datasheet power specification. Apply suitable supply-decoupling and copper-heat-spreading arrangements, then verify actual dissipation across normal operating states and the highest expected network activity.
Do not treat a shared 144-LQFP footprint as proof of complete pin compatibility. Before substituting DP83815DVNG or approving another related controller, compare every pin by name and function, including power, ground, clocks, resets, interrupts, PCI signals, and Ethernet transceiver connections. Also verify device status, package form, temperature range, and firmware or driver expectations; a PCB may fit physically while still failing functional or production requirements.
Route high-speed PCI signals as a controlled-length, continuously referenced group and maintain the topology expected by the manufacturer's application information. Keep the 33 MHz PCI clock away from Ethernet magnetics and analog transceiver routing. Confirm trace impedances, via transitions, decoupling placement, and ground-return continuity in the PCB constraints because the large 144-pin package does not by itself guarantee signal-integrity or EMC performance.
Maklumat Kesediaan
The product information does not explicitly state the requested compliance results. The IEEE 802.3 and IEEE 802.3u references describe Ethernet standards and do not establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.