DS90CR562MTD - 18-Bit LVDS FPD-Link Receiver | Texas Instruments
MPN: DS90CR562MTD ✓ 啟用中DS90CR562MTD 概覽
An LVDS receiver is an interface circuit that restores low-voltage differential signaling data at the display end of a link. FPD-Link is a display-oriented interface standard that transports parallel video data over differential pairs. In the DS90CR562MTD, the LVDS input stage recovers three data streams and separates the transmitted clock information, allowing a display controller or timing circuit to reconstruct pixel data.
The principal electrical characteristics include a 4.5 V to 5.5 V supply range, 21 receiver inputs, three data streams, and LVDS protocol support. The package is a 48-TSSOP, also identified in the product listing as 48-TFSOP with a 0.240 inch, 6.10 mm width. The listed packaging format is Tube, and the device is categorized as an interface IC for specialized display-link applications.
The DS90CR562MTD is primarily intended for systems using the National Semiconductor DS90CR561 transmitter and DS90CR562 receiver family. Its architecture supports the transfer of 18-bit color information over an LVDS display link rather than conventional parallel RGB wiring. This can reduce signal-routing complexity and support a more compact connection between a display engine and a flat-panel display timing controller.
Designers should verify differential pair routing, LVDS input impedance, termination strategy, supply decoupling, and the exact display timing requirements of the target panel before releasing a PCB layout. The receiver is a digital interface device, so a conventional power-semiconductor safe-operating-area chart does not apply. Compliance status should be confirmed against the manufacturer’s current product documentation for the exact ordering code.
This page combines the documented DS90CR562MTD interface and package information with application guidance, comparison parameters, and drop-in replacement analysis for engineers evaluating display-link receiver designs.
直接替換替代品,適用於 DS90CR562MTD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DS90CR562MTD (相同外形與佔位) — 差異在於 Package Type, Product Type, Package.
DS90CF562MTD
✅ 直接替換聯絡詢價
查看資料表 →DS90CR213MTD
✅ 直接替換聯絡詢價
查看資料表 →DS90CR561MTD
✅ 直接替換聯絡詢價
查看資料表 →DS90CR561AQT
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
DS90CR562AQT
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
DS90CR562MTD 規格
| Product Type | LVDS 18-bit color flat-panel display link receiver |
| Number of Drivers/Receivers | 3/21 |
| Receiver Input Count | 21 |
| LVDS Data Stream Count | 3 |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Protocol | FPD-Link, LVDS |
| Signal Standard | LVDS (Low Voltage Differential Signaling) |
| Transmitted Data | 21 bits of CMOS/TTL data |
| Color Data Width | 18 bit |
| Clock Transmission | Phase-locked transmit clock transmitted in parallel |
| 封裝 | 48-TFSOP, 0.240 inch, 6.10 mm width |
| Package Type | 48-pin TSSOP |
| 安裝類型 | Surface Mount |
| Packaging Format | Tube |
DS90CR562MTD 48-pin tssop 腳位配置指南
DS90CR562MTD(48-pin tssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DS90CR562MTD.
請參閱 資料表 以查看完整腳位配置。
典型應用
DS90CR562MTD 適用於 6 應用s: Industrial Flat-Panel Monitor Receiver, Digital Video Display Interface, Medical Diagnostic Display, Point-of-Sale Terminal Display, Video Processing System, Legacy Monitor Repair or Board Reuse.
Industrial Flat-Panel Monitor Receiver
The DS90CR562MTD fits an industrial flat-panel monitor built around the DS90CR561/DS90CR562 display link because it receives three LVDS data streams carrying the 18-bit color path and uses a parallel phase-locked clock. The 4.5 V to 5.5 V operating range supports a conventional 5 V receiver rail, while the 48-TSSOP package enables a compact interface section beside the display timing electronics. For an industrial design, confirm the panel’s supported color depth, timing range, clock recovery expectations, and exact differential-pair mapping. Also review temperature limits and EMC requirements against the manufacturer documentation before production release.
推薦
Digital Video Display Interface
DS90CR562MTD is appropriate for a digital video display interface that carries parallel color data from a display engine to a panel timing controller. The receiver accepts the three differential data streams created from 21 CMOS/TTL bits and receives the phase-locked clock through the parallel clock path described for the DS90CR561/DS90CR562 family. This architecture reduces the number of high-speed point-to-point traces compared with a direct 18-bit parallel RGB route. The board designer must preserve differential pair geometry, provide a compliant LVDS interconnect, and verify that the panel controller accepts the recovered data and clock timing.
推薦
Medical Diagnostic Display
The DS90CR562MTD can support the digital video connection of a medical diagnostic display when the display uses the matching DS90CR561/DS90CR562 FPD-Link architecture. Its three-LVDS-stream interface and parallel phase-locked clock path provide a compact connection for transferring 18-bit color data between the acquisition or processing electronics and the display timing circuit. The receiver itself does not define diagnostic-image accuracy, so system validation must cover bit integrity, panel timing, grounding, shielding, and any medical electrical requirements. Use the manufacturer datasheet to confirm supply limits, temperature range, and the exact receiver pin assignments.
推薦
Point-of-Sale Terminal Display
DS90CR562MTD is suitable for the internal display interface of a point-of-sale terminal or compact kiosk when the panel controller uses the National Semiconductor 18-bit color FPD-Link architecture. The receiver helps replace a wide parallel display bus with three LVDS data streams and a parallel clock path, which can simplify routing around a dense system board. The 48-TSSOP package provides a compact receiver footprint, and the 4.5 V to 5.5 V range aligns with a standard 5 V rail. Before deployment, verify refresh rate, resolution, panel clock tolerance, startup behavior, connector pinout, and the thermal environment inside the enclosure.
推薦
Video Processing System
The DS90CR562MTD fits a video-processing system that separates pixel transport from local display timing. A DS90CR561-family transmitter converts 21 bits of CMOS/TTL data into three LVDS streams, and the DS90CR562MTD provides the receiving side of that display link with the phase-locked transmit clock carried in parallel. This arrangement is useful when the processor, scaler, or display controller is separated from the panel connector by several centimeters of PCB routing. Signal-integrity work must ensure compliant differential impedance, controlled pair length matching, suitable connector transitions, and a clock distribution plan that meets the receiver and panel timing requirements.
推薦
Legacy Monitor Repair or Board Reuse
DS90CR562MTD is relevant to repair and board-reuse projects involving an established LVDS flat-panel display link based on the National Semiconductor DS90CR561/DS90CR562 architecture. Because the receiver uses a 48-TSSOP package and operates from 4.5 V to 5.5 V, it can support direct design-in when the original footprint and interfaces are confirmed. A repair should not begin from the part number alone: compare every supply, ground, differential input, clock, enable, and no-connect position with the manufacturer pin table. Validate the replacement against the actual display timing and check for obsolete companion components elsewhere in the board.
推薦
推薦產品摘要
工程參考資料,適用於 DS90CR562MTD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DS90CF562MTD | DS90CR213MTD | DS90CR561MTD | DS90CR561AQT | DS90CR562AQT |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TSSOP | 48-TSSOP | 48-TSSOP | 48-TSSOP | 48-TSSOP | 48-TSSOP |
主要差異化特點
- Receiver role matches the DS90CR561 transmitter direction (對比DS90CR561MTD)
- Documented 48-pin TSSOP footprint with 48-TFSOP package listing (對比DS90CR213MTD)
- Same-family receiver candidate with shared display-link architecture (對比DS90CF562MTD)
- 18-bit color FPD-Link positioning (對比DS90CR213MTD)
設計說明
Route each LVDS differential pair as a controlled-impedance pair over a continuous reference plane. Keep the two traces of a pair at equal length, avoid stubs and test-point discontinuities, and use the manufacturer’s recommended input termination and layer-transition geometry. The DS90CR562MTD receives three LVDS data streams, so pair-to-pair skew and connector transitions must be checked together rather than treating the link as ordinary parallel routing.
Place the receiver and its local supply-decoupling network close to the display connector and LVDS trace endpoints. The documented operating range is 4.5 V to 5.5 V, so follow the manufacturer’s recommended capacitor values and placement for the 5 V rail rather than treating the receiver as a generic digital IC. Keep noisy switching-regulator and processor return currents out of the immediate receiver ground path, and verify the pin table before assigning supply and ground connections.
Do not assume that every 48-TSSOP DS90CR-family device is interchangeable. DS90CR561MTD and DS90CR562MTD are complementary transmitter and receiver devices, while DS90CF562MTD and DS90CR213MTD may differ in protocol details, pin function, timing, or supply requirements. Before substitution, compare all 48 positions, differential pair assignments, clock direction, enable behavior, no-connect pins, absolute maximum ratings, and panel timing against the manufacturer datasheets.
Confirm the receiver’s supply tolerance, current consumption, power-up sequence, and clock stability against the current manufacturer datasheet before finalizing the 5 V distribution network. If the nearby transmitter or display controller has a different power-up order, use the specified sequencing controls to avoid invalid pin states and startup transients. Do not infer power behavior solely from the 4.5 V to 5.5 V operating-range summary.
合規資訊
The indexed product results do not state exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm compliance for the exact ordering code and current manufacturer documentation before release.