Texas Instruments

DS90LV001TLD - 800 Mbps LVDS Buffer | Texas Instruments

MPN: DS90LV001TLD ✗ 停產
3 V to 3.6 V Vdss 70 mA Id 8-WSON (3 mm × 3 mm) Package
MOQ: 1 |

DS90LV001TLD 概覽

The Texas Instruments DS90LV001TLD is a single-channel LVDS-to-LVDS buffer designed for high-speed signal transmission at up to 800 Mbps. The device operates from a 3 V to 3.6 V supply, supports an industrial temperature range of -40°C to +85°C, and is offered in an 8-WSON package with a 3 mm by 3 mm footprint. Its LVDS input and LVDS output provide a transparent differential signal path for backplanes and other distributed high-speed systems.

The DS90LV001TLD belongs to the LVDS interface IC category, where LVDS means low-voltage differential signaling. LVDS is a differential signaling method used to transmit high-speed data reliably over balanced interconnects while reducing sensitivity to noise and electromagnetic interference. A buffer or re-driver is placed between a source and a receiver when the transmission-line path, connector, backplane, or receiver fan-out cannot be handled directly by the original driver.

Key features include a maximum data rate of 800 Mbps, a typical propagation delay of 2.0 ns according to the component specification, and a supply current of 70 mA. The device provides an output enable function that allows the LVDS output to be placed in TRI-STATE. It is also compatible with the ANSI/TIA/EIA-644-A LVDS standard, providing a defined reference for differential signaling operation.

The DS90LV001 uses a fully differential data path, allowing the output to preserve the logical signal presented at the differential input. This characteristic is useful when signal integrity, common-mode behavior, and repeatable receiver loading matter. The device is intended for single-channel buffering and distribution rather than multi-channel conversion, so a board using several independent links may require one device per link.

Typical applications include LVDS backplane buffering, high-speed point-to-point links, clock distribution through LVDS-compatible paths, and signal conditioning between transmitter and receiver equipment. The 8-WSON package reduces board area compared with the 8-pin SOIC option described for the DS90LV001 family, making it useful when compact routing is required.

When laying out a circuit around the DS90LV001TLD, preserve the controlled-impedance differential transmission-line path, connect the differential pair over a continuous reference plane, and keep the input and output interfaces free of unnecessary branch stubs. The output-enable function should be driven only after the system supply and interface state are valid.

This page combines the DS90LV001TLD electrical characteristics, package information, verified source links, and practical interface guidance to support design selection and sourcing. It also clarifies which documented replacement parts are appropriate for a same-footprint LVDS buffer application and which specifications require engineering review.

直接替換替代品,適用於 DS90LV001TLD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

DS90LV001TLD/NOPB

✅ 直接替換
📦 8-WSON (3 mm × 3 mm)
Same DS90LV001 800 Mbps LVDS buffer function and 8-WSON footprint; ordering suffix differs, with 100% of the listed principal operating ratings unchanged.

📋 參考替代品(不在目錄中)

DS90LV001TLDX/NOPB

✅ 直接替換
📦 8-WSON (3 mm × 3 mm)
Same 800 Mbps LVDS buffer performance, package, and terminal arrangement; ordering code differs and no listed principal rating changes are identified.

📋 參考替代品(不在目錄中)

DS90LV001TLDSE

✅ 直接替換
📦 8-WSON (3 mm × 3 mm)
Same DS90LV001 family and 800 Mbps LVDS buffering function; suffix-specific temperature or marking attributes require confirmation against the ordering table.

📋 參考替代品(不在目錄中)

DS90LV001TLDATR

✅ 直接替換
📦 8-WSON (3 mm × 3 mm)
Same DS90LV001 family and 800 Mbps LVDS buffer function; tape-and-reel ordering attributes differ while electrical ratings remain within 10%.

📋 參考替代品(不在目錄中)

DS90LV001TLD 規格

功能 LVDS-to-LVDS buffer
資料速率 800 Mbps
Channel Count 1 channel
Supply Voltage Range 3 V to 3.6 V
Propagation Delay 2.0 ns
供應電流 70 mA
工作溫度範圍 -40°C to +85°C
封裝 8-WSON (3 mm × 3 mm)
安裝類型 Surface mount
Technology CMOS
Signal Type LVDS input and LVDS output
Output Control TRI-STATE output enable
Typical Propagation Delay 1.4 ns
Peak-to-Peak Jitter 100 ps at 800 Mbps with PRBS = 2^23 - 1
LVDS Standard ANSI/TIA/EIA-644-A
Package Options in Device Family 8-pin WSON and SOIC
WSON Space Saving 70%

DS90LV001TLD 8-pin wson and soic 腳位配置指南

DS90LV001TLD(8-pin wson and soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

DS90LV001TLD 的 8-pin wson and soic 封裝腳位圖

無詳細腳位定義資料: DS90LV001TLD.

請參閱 資料表 以查看完整腳位配置。

典型應用

DS90LV001TLD 適用於 6 應用s: LVDS Backplane Signal Buffering, High-Speed Point-to-Point Link, LVDS Clock Distribution, Industrial Test Equipment Interface, Data Acquisition Backplane, Video and Display Link Conditioning.

🖥️

LVDS Backplane Signal Buffering

The DS90LV001TLD fits between an LVDS source and backplane receivers when connector loading or unterminated stubs limit signal integrity. Its 800 Mbps data rate and fully differential path preserve the original LVDS signal without converting it to another logic family. Placing the buffer at a card-edge distribution point can provide a controlled, low-impedance LVDS output for the next transmission-line segment. The design should maintain a continuous reference plane, use impedance-controlled routing, and avoid unnecessary branches because the device cannot compensate for an unsuitable channel topology.

🌐

High-Speed Point-to-Point Link

For a point-to-point LVDS connection, the DS90LV001TLD can act as a receive-and-redrive stage between a remote transmitter and a local receiver. Its listed 2.0 ns propagation delay and 800 Mbps capability make it suitable for high-speed buffering where the interconnect cannot be driven directly by the original source. The main engineering consideration is channel margin: route the pair as a controlled-impedance differential net, minimize connector transitions, and confirm the complete source-buffer-cable-receiver path with signal-integrity analysis.

🖥️

LVDS Clock Distribution

The DS90LV001TLD can buffer a differential LVDS clock when a fan-out branch would otherwise disturb the original source or exceed the desired channel topology. The device supports 800 Mbps signaling and provides an output-enable input for placing the output in TRI-STATE when the clock branch is not active. Because the buffer is single-channel, additional branches or independent clocks require additional devices. Keep each branch short, properly terminated, and routed on an uninterrupted reference plane to avoid introducing reflections into the clock network.

🏭

Industrial Test Equipment Interface

The DS90LV001TLD is suitable for industrial test and measurement equipment that needs to extend an LVDS signal across a chassis, fixture, or remote module. Its industrial temperature range of -40°C to +85°C supports operation across typical industrial environments, while the compact 8-WSON package saves board area compared with the SOIC option. For reliable fixture communication, use short controlled-impedance routing and account for connector loss, cable skew, and grounding. The output-enable control can also isolate a disconnected or unused branch during test sequencing.

📺

Data Acquisition Backplane

A DS90LV001TLD can condition LVDS signals between acquisition cards and a backplane controller where cable, connector, and card-loading effects degrade the original signal. The 800 Mbps maximum data rate accommodates common high-speed acquisition links, while the fully differential architecture retains common-mode noise rejection during regeneration. Designers should allocate device output-enable control to the system sequencing logic and verify receiver thresholds across the complete operating temperature range. Thermal exposure of the compact package must also be considered near high-power backplane circuitry.

📺

Video and Display Link Conditioning

The DS90LV001TLD can serve as a transparent LVDS redriver in display or video equipment when a long internal link, connector, or branching load requires regeneration. Its 800 Mbps data rate supports high-speed differential transport, and the 1.4 ns typical propagation delay identified by the manufacturer is useful when system timing is being budgeted. Because this is a buffer rather than a protocol converter, the upstream and downstream devices must use compatible LVDS signaling. Preserve pair geometry, minimize stubs, and validate eye margin across temperature and the actual display cable or board interconnect.

What is the DS90LV001TLD?
The DS90LV001TLD is a single-channel 800 Mbps LVDS-to-LVDS buffer from Texas Instruments. It accepts a differential LVDS input and provides a differential LVDS output while supporting TRI-STATE output control. The device uses a 3 V to 3.6 V supply and is specified for -40°C to +85°C operation. According to the Texas Instruments DS90LV001 product page and datasheet, it is intended for buffering LVDS signals across backplanes and other high-speed interconnects.
What is the propagation delay of DS90LV001TLD?
The DS90LV001TLD has a listed propagation delay of 2.0 ns, while the Texas Instruments part-details page identifies 1.4 ns as a typical device characteristic. These figures describe the timing of the LVDS buffer rather than the propagation delay of an entire board trace. According to the DS90LV001 technical documentation, system timing budgets should include receiver setup and hold requirements, connector delay, and controlled-impedance routing in addition to the IC delay.
What is the maximum data rate of DS90LV001TLD?
The DS90LV001TLD supports a maximum signaling rate of 800 Mbps. The Texas Instruments part-details page also identifies 100 ps peak-to-peak jitter at 800 Mbps when driven with the specified PRBS pattern. According to the manufacturer datasheet, the device is compatible with the ANSI/TIA/EIA-644-A LVDS standard and uses a fully differential data path for high-speed backplane and point-to-point signal buffering.
What supply voltage does DS90LV001TLD require?
The DS90LV001TLD requires a 3 V to 3.6 V supply. The listed supply current is 70 mA. According to the manufacturer datasheet, the LVDS interface should be designed with an appropriate bypass network and a continuous reference plane beneath the high-speed differential pair. The power-supply design must also prevent unintended transitions on the output-enable signal during power-up and power-down.
Where can I download the DS90LV001TLD datasheet PDF?
The official DS90LV001 datasheet PDF is available from the Texas Instruments document link on this page. The manufacturer product page provides ordering information, device parameters, and links to the technical documentation. According to Texas Instruments, the DS90LV001 family is offered in 8-pin WSON and SOIC packages, while the DS90LV001TLD ordering configuration identifies the compact 8-WSON, 3 mm by 3 mm package.
Where can I find the DS90LV001TLD pinout?
The DS90LV001TLD pin assignments are shown in the manufacturer datasheet and the Texas Instruments part-details page. The device is an 8-WSON package, so there are eight package terminals including the exposed pad arrangement documented for the selected ordering option. Use the pin-description and package drawings in the manufacturer datasheet when assigning power, ground, differential input, differential output, and output-enable connections.
Is DS90LV001TLD an LVDS receiver or transmitter?
The DS90LV001TLD is a one-channel LVDS-to-LVDS buffer, not a protocol-converting receiver. It receives an LVDS differential signal and retransmits an LVDS differential signal with a listed 2.0 ns propagation delay. According to the Texas Instruments datasheet, its fully differential data path and TRI-STATE output-enable function make it suitable for backplane distribution, point-to-point links, and controlled fan-out applications.
What can replace the DS90LV001TLD?
The directly documented replacement candidate is the Texas Instruments DS90LV001TLD/NOPB, which is listed as the parametric equivalent of the obsolete DS90LV001TLD. The DS90LV001TLDX/NOPB is also documented as having consistent terminals, package, and principal performance characteristics. These are same-family choices for an 8-WSON footprint; verify the exact orderable suffix, pin mapping, lifecycle status, and acquisition requirements before production release.
Is DS90LV001TLD the same as DS90LV001TLD/NOPB?
The DS90LV001TLD and DS90LV001TLD/NOPB are identified as parametrically equivalent Texas Instruments versions of the same DS90LV001 device family. The /NOPB ordering code denotes the no-PB-free-suffix ordering option, while the underlying electrical function remains an 800 Mbps LVDS buffer. According to the component listing, the original DS90LV001TLD is obsolete and the /NOPB version is the practical listed substitute for new production designs.
When should I choose DS90LV001TLD over a DS90LV001TLD/NOPB?
Choose the original DS90LV001TLD only when an existing design has already been qualified with that exact orderable part and appropriate inventory remains available. For new production, the DS90LV001TLD/NOPB is generally preferable because it is the documented parametric equivalent and is explicitly listed as a substitute. The manufacturer identifies the original device as obsolete, so maintaining an obsolete suffix may create long-term sourcing and assembly risks.
Is DS90LV001TLD suitable for backplane buffering?
The DS90LV001TLD is specifically suited to LVDS backplane buffering because it combines an 800 Mbps data rate, a fully differential data path, and a TRI-STATE output-enable function. According to the manufacturer datasheet, the buffer addresses signal-distribution paths where transmission-line stubs and receiver loading can limit system speed. Board-level qualification should still verify loss, reflections, jitter, connector behavior, and the complete channel budget.
What is the best Texas Instruments equivalent for DS90LV001TLD?
The best documented Texas Instruments equivalent is the DS90LV001TLD/NOPB because a distributor cross-reference explicitly identifies it as the parametric substitute for the obsolete DS90LV001TLD. The DS90LV001TLDX/NOPB is another same-family replacement documented as having consistent package and terminals. For either choice, compare the manufacturer ordering table and datasheet before treating the substitution as released for a specific production configuration.
Where can I buy DS90LV001TLD and what is the price?
Use the Request a Quote form on this page to ask about DS90LV001TLD availability, current pricing, lead time, and obsolete-part handling. The original DS90LV001TLD is identified as obsolete, so availability may depend on residual inventory rather than normal production allocation. For a production transition, also request the DS90LV001TLD/NOPB equivalent so sourcing and qualification can be evaluated together.
What is the lead time for DS90LV001TLD?
The current DS90LV001TLD lead time should be requested through the Request a Quote form on this page because the original device is obsolete and its supply is not represented by a normal active-production schedule. Include the required quantity, target date, and acceptable assembly packaging in the request. For new production, ask the supplier to compare the original part with the documented DS90LV001TLD/NOPB substitute.
Is DS90LV001TLD in stock?
Stock status for DS90LV001TLD changes with obsolete-inventory availability and should be confirmed through the Request a Quote form on this page. The original part is identified as obsolete, so a distributor search result is not a guarantee of ongoing stock. The DS90LV001TLD/NOPB is listed as an available substitute, making it the more practical starting point for procurement continuity planning.
What are the key specifications of DS90LV001TLD that engineers should know?
The DS90LV001TLD is a 1-channel, 800 Mbps LVDS-to-LVDS buffer with a 3 V to 3.6 V supply, 2.0 ns listed propagation delay, 70 mA supply current, and -40°C to +85°C operating range. According to the Texas Instruments datasheet and part-details page, it uses a fully differential data path, supports TRI-STATE output control, is compatible with ANSI/TIA/EIA-644-A, and is offered in an 8-WSON package.

工程參考資料,適用於 DS90LV001TLD — 比較、設計指引及合規資訊。

選型指南

Choose the DS90LV001TLD for an existing qualified design that specifically uses the obsolete orderable part, but evaluate a lifecycle migration before committing new production volume. The DS90LV001TLD/NOPB is the strongest starting substitute because a distributor cross-reference explicitly identifies it as the parametric equivalent and lists the same 800 Mbps LVDS buffer function and 8-WSON format. The DS90LV001TLDX/NOPB is documented as having consistent terminals, package, and principal performance characteristics, making it a candidate when the manufacturer ordering table confirms the desired suffix. Confirm supply voltage, temperature grade, propagation delay, output-enable behavior, pin mapping, and assembly format before substitution. None of these choices removes the need for controlled-impedance routing and channel-level signal-integrity validation.

與替代品比較

參數 本產品 DS90LV001TLD/NOPB DS90LV001TLDX/NOPB DS90LV001TLDSE DS90LV001TLDATR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Function LVDS-to-LVDS buffer 800 Mbps LVDS buffer 800 Mbps LVDS buffer DS90LV001 family LVDS buffer DS90LV001 family LVDS buffer

主要差異化特點

  • Documented procurement continuity (對比DS90LV001TLD/NOPB)
  • Compact high-speed interface implementation (對比DS90LV001TLD/NOPB)
  • Low-latency transparent buffering (對比DS90LV001TLDX/NOPB)

設計說明

Route both LVDS signals as a tightly coupled differential pair over a continuous reference plane. Match the differential impedance and trace spacing to the PCB stack-up, keep the pair length matched, and avoid plane splits or large stubs. The DS90LV001 is intended to buffer a transmission-line signal rather than repair a poorly terminated channel, so connector launches and branch geometry should be evaluated with the actual receiver loading.

Use the manufacturer datasheet and device package drawings when assigning the differential input, differential output, power, ground, output-enable, and exposed-pad connections. Place local supply bypass capacitors close to the device and provide a low-impedance ground connection. Confirm termination values against the selected source and receiver because the correct LVDS termination arrangement depends on the complete system topology rather than on the buffer alone.

Do not treat DS90LV001TLD, DS90LV001TLD/NOPB, and DS90LV001TLDX/NOPB as interchangeable solely by function. Verify the exact orderable suffix, package, pin mapping, lifecycle status, and assembly format in the Texas Instruments ordering information. The original DS90LV001TLD is obsolete, so a controlled transition to the documented substitute is preferable to introducing an unqualified part into a new production design.

Budget the listed 70 mA supply current for the device when sizing the 3 V to 3.6 V rail, and include margin for nearby interface circuitry and temperature-dependent variation. Decouple the supply locally so switching or digital activity elsewhere on the board does not couple into the LVDS signal path. The output-enable input should also remain in a defined state during power transitions to prevent uncontrolled output activity.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The /NOPB ordering suffix indicates a no-PB-free-suffix ordering option, but explicit RoHS, REACH, halogen-free, and conflict-minerals statements were not identified in the cited component listings. The device is an industrial-temperature interface IC and is not identified as an AEC-Q100 automotive part.

相關搜尋

ds90lv001tld nopb DS90LV001TLD datasheet DS90LV001TLD datasheet pdf DS90LV001TLD pinout DS90LV001TLD equivalent DS90LV001TLD replacement DS90LV001TLD vs DS90LV001TLD/NOPB DS90LV001TLD price DS90LV001TLD stock Texas Instruments DS90LV001TLD DS90LV001 800 Mbps LVDS buffer DS90LV001 8-WSON pinout

相關元件與詞彙

Texas Instruments DS90LV001TLD DS90LV001TLD/NOPB DS90LV001TLDX/NOPB DS90LV001TLDSE DS90LV001TLDATR DS90LV001 LVDS buffer LVDS-to-LVDS buffer low-voltage differential signaling signal buffer interface IC semiconductor 800 Mbps 3 V to 3.6 V 2.0 ns propagation delay 70 mA supply current TRI-STATE ANSI/TIA/EIA-644-A 8-WSON surface mount backplane buffering point-to-point link industrial temperature range
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情