DS90LV048ATMTC - 400 Mbps Quad LVDS Receiver | Texas Instruments
MPN: DS90LV048ATMTC ✓ 啟用中DS90LV048ATMTC 概覽
An LVDS receiver is a differential interface circuit that extracts a digital signal from two complementary low-voltage conductors. LVDS belongs to the high-speed differential-signaling family and sits below general-purpose interface ICs in the semiconductor hierarchy: receiver IC -> differential line receiver -> interface IC -> semiconductor. Its differential architecture improves noise immunity by detecting the voltage difference between a pair of lines rather than relying on a single conductor referenced only to ground.
The DS90LV048A family provides four independent receiver channels, a 400 Mbps signaling rate, operation from a 3.3 V supply, and common enable control for the output stage. The flow-through signal path supports straightforward point-to-point links between a compatible LVDS transmitter and receiving logic. CMOS outputs allow the device to interface with digital systems operating from the same 3.3 V rail.
Electrical operation depends on the differential input voltage and receiver threshold rather than single-ended logic levels. The LVDS input arrangement improves signal-to-noise ratio and reduces sensitivity to common-mode noise when the transmitter, receiver, connectors, and cable form a controlled impedance environment. The manufacturer identifies the DS90LV048A as a low-power alternative to high-power PECL and ECL devices in suitable point-to-point applications.
Typical uses include industrial control links, instrumentation, video or imaging backplanes, test equipment, and communications equipment requiring several high-speed LVDS channels. The quad-channel configuration reduces package count compared with discrete single-channel receivers. In point-to-point links, the DS90LV048ATMTC can be paired with an LVDS line driver such as the DS90LV047A while preserving the low-voltage differential signaling architecture.
PCB implementation should use a compact, controlled-impedance routing scheme and place termination close to the receiver when the selected link topology requires it. Differential pair spacing and length matching should follow the characteristics of the LVDS transmitter and interconnect. Supply and ground distribution should be decoupled close to the device because simultaneous switching across four fast receiver channels can create transient current in the power rails.
This page combines the manufacturer's receiver specifications, ordering details, practical interface guidance, and qualified same-footprint references. It also distinguishes confirmed orderable variants from broader functional alternatives, helping engineers assess replacement compatibility before changing an LVDS link or PCB assembly.
直接替換替代品,適用於 DS90LV048ATMTC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
DS90LV048ATMTC/NOPB
✅ 直接替換📋 參考替代品(不在目錄中)
DS90LV048ATMTCX/NOPB
✅ 直接替換📋 參考替代品(不在目錄中)
DS90LV048ATMTC 規格
| Receiver Type | Quad CMOS flow-through differential line receiver |
| Number of Receiver Channels | 4 channels |
| Number of Transmitter Channels | 0 channels |
| Signaling Standard | LVDS |
| Maximum Data Rate | 400 Mbps |
| Equivalent Data Rate | 200 MHz |
| 供應電壓 | 3.3 V |
| Output Interface | CMOS |
| Input Signal | LVDS differential input |
| Output Enable Control | Common enable and enable-bar control |
| 封裝 | 16-TSSOP |
| Package Width | 4.40 mm |
| Package Body Length | 0.173 inch |
| 安裝類型 | Surface mount |
| 工作溫度範圍 | -40 °C to +85 °C |
DS90LV048ATMTC 0.173 inch 腳位配置指南
DS90LV048ATMTC(0.173 inch 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DS90LV048ATMTC.
請參閱 資料表 以查看完整腳位配置。
典型應用
DS90LV048ATMTC 適用於 6 應用s: Industrial Point-to-Point Control Links, Video and Imaging Data Backplanes, Test and Measurement Instrumentation, Communications Equipment, Imaging Sensor Interfaces, Automotive and Robust Embedded Links.
Industrial Point-to-Point Control Links
The DS90LV048ATMTC fits industrial control links that require four differential receive channels at rates above 400 Mbps. Each channel converts an LVDS pair into a CMOS output, allowing a controller or FPGA to receive data from remote high-speed nodes while rejecting common-mode noise. The four-channel integration reduces package count and board area compared with four discrete receiver packages. Designers should preserve controlled-impedance differential routing, provide the documented termination network, and decouple the 3.3 V supply close to the device. The -40 °C to +85 °C operating range supports industrial equipment where internal temperatures exceed ordinary consumer conditions.
推薦
Video and Imaging Data Backplanes
The DS90LV048ATMTC is appropriate for parallel video or imaging data paths that use four LVDS pairs between circuit boards or modules. Its support for rates above 400 Mbps and CMOS outputs makes it suitable for receiving serialized high-speed data from a transmitter, although the device does not itself perform protocol conversion, color processing, or packet decoding. Four channels can carry related pixel, synchronization, or control streams without requiring four separate receiver packages. Keep each differential pair continuous over a ground reference, minimize stub branches, and verify connector and cable impedance before production release.
推薦
Test and Measurement Instrumentation
The DS90LV048ATMTC can receive four high-speed differential channels in laboratory instruments, automated test equipment, and data-acquisition systems. Its 400 Mbps-class operation supports fast transfer of measurement results, trigger signals, or status information between circuit sections while CMOS outputs connect directly to suitable control logic. The quad architecture helps instruments consolidate several links behind one receiver package. The principal design considerations are clean supply distribution, return-path continuity, and compliance with the LVDS voltage thresholds of the selected transmitter. Validate timing margins across temperature because propagation delay and receiver performance must remain acceptable for the complete measurement sequence.
推薦
Communications Equipment
The DS90LV048ATMTC is useful in communications equipment requiring multiple high-speed LVDS receive ports. Four differential channels can carry clock, data, status, and supervisory signals between modules, with each input providing a CMOS output for downstream digital circuitry. This is particularly helpful in compact backplanes where connector density is constrained and reducing receiver package count improves routing flexibility. Designers must maintain differential impedance through the entire path and account for connector loss, cable length, and the transmitter's recommended termination. The receiver should be placed near the connector when channel loss or skew is significant, with supply bypassing arranged to avoid shared high-frequency current paths.
推薦
Imaging Sensor Interfaces
The DS90LV048ATMTC can serve as the receiving element in imaging modules that transfer several high-speed differential streams from a sensor or transmitter board. Its four receivers support data above 400 Mbps per channel, while CMOS outputs provide a convenient interface to an FPGA or other digital controller. Multiple parallel channels can carry pixel data, synchronization information, or configuration status when the remote transmitter implements the corresponding LVDS signaling. The receiver itself does not deserialize or format the image, so synchronization and protocol handling remain the responsibility of the receiving controller. PCB layout should preserve return-current continuity beneath every differential pair and provide local supply decoupling.
推薦
Automotive and Robust Embedded Links
The DS90LV048ATMTC can be considered for robust embedded signal links where four LVDS channels are needed across a compact board or module. Its -40 °C to +85 °C range and differential signaling provide useful noise immunity for data transferred between circuit sections, converters, sensors, or communication modules. The receiver is not identified as an AEC-Q100-qualified automotive part, so qualification requirements must be checked separately rather than inferred from the industrial temperature range. Keep the supply and return planes continuous, place bypass capacitors at the device, and verify the complete channel against the driver's threshold, timing, and termination requirements.
推薦
推薦產品摘要
工程參考資料,適用於 DS90LV048ATMTC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DS90LV048ATMTC/NOPB | DS90LV048ATMTCX/NOPB |
|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Receiver Function | Quad CMOS flow-through differential line receiver | Quad CMOS flow-through differential line receiver | Quad CMOS flow-through differential line receiver |
| Number of Receiver Channels | 4 channels | 4 channels | 4 channels |
| Signaling Rate | Above 400 Mbps | 400 Mbps | 400 Mbps |
| Equivalent Clock Rate | 200 MHz | 200 MHz | 200 MHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Output Interface | CMOS | CMOS | CMOS |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Ordering Configuration | DS90LV048ATMTC | DS90LV048ATMTC/NOPB ordering code | DS90LV048ATMTCX/NOPB ordering code |
主要差異化特點
- Four-channel receiver consolidation (對比DS90LV048ATMTC/NOPB)
- Pin-compatible Texas Instruments sourcing options (對比DS90LV048ATMTCX/NOPB)
- Compact multi-channel LVDS interface (對比DS90LV048ATMTC/NOPB)
設計說明
Route every LVDS channel as a continuous differential pair over a continuous reference plane. Avoid changing pair width, adding test-probe stubs, or creating unequal branches between the transmitter and receiver. Place any required termination at the receiver end unless the transmitter documentation specifies another topology. This is essential because a discontinuity in the differential path can reflect energy into the link and degrade eye margin.
Place the DS90LV048ATMTC close to the input connector or cable interface when interconnect loss is significant. Keep the four differential pairs away from clocks, switching-power-node traces, and other high-current edges. Maintain a direct ground-return path beneath the pairs, and use the package pin configuration in the manufacturer datasheet to orient routing consistently with the exposed pad or thermal requirements of the selected TSSOP variant.
Connect the 3.3 V supply through a low-impedance plane or trace and place the manufacturer-recommended bypass capacitors immediately beside the supply and ground pins. Four simultaneously operating high-speed channels can produce fast transient current even though the receiver is designed for low power. Avoid sharing a long narrow supply neck between bypass capacitors and the device, because common supply inductance can translate switching current into receiver supply noise.
Do not treat an LVDS receiver as a general-purpose logic input, and do not substitute a line driver such as the DS90LV047A for this receiver. Confirm the pin assignment, input common-mode range, differential threshold, output-enable polarity, termination, and CMOS output voltage levels in the manufacturer datasheet. Also verify that any proposed replacement has the same 16-TSSOP footprint rather than merely a similar receiver function.
合規資訊
The manufacturer documentation confirms the 3.3 V operating range, 400 Mbps signaling rate, 16-TSSOP package, and -40 °C to +85 °C temperature range. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the applicable Texas Instruments product documentation.