EFM32TG840F16-QFN64T - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG840F16-QFN64T ✓ 啟用中EFM32TG840F16-QFN64T 概覽
An ARM Cortex-M3 microcontroller is a 32-bit embedded processing device built around the ARM Cortex-M3 processor core. The Tiny Gecko family combines that core with low-power operating techniques, fast wake-up behavior, energy-saving modes, analog functions, and communication peripherals. The EFM32TG840F16-QFN64T is designed for applications where deterministic control, low standby consumption, and a compact package are more important than large memory capacity.
Principal features include 16 KB of Flash, 4 KB of RAM, 56 digital I/O pins, and a maximum CPU frequency of 32 MHz. The device also provides two 16-bit timers, AES hardware support, three operational amplifiers, and support for an 8 x 20 character LCD according to the manufacturer listings. These resources allow a design to combine control logic, analog signal conditioning, secure data handling, and user-interface drive functions without requiring a separate LCD controller.
The Tiny Gecko architecture emphasizes energy-efficient operation through low-power modes and rapid resume behavior. Its operational amplifiers can support sensor conditioning and analog measurements, while the hardware AES block accelerates encrypted communication and protected data handling. The 56 I/O pins provide substantial host connectivity, although pin multiplexing determines the simultaneous peripheral allocation available on a specific board.
Typical applications include industrial sensor nodes, connected energy meters, compact control panels, portable medical monitoring equipment, and low-power IoT devices. A battery-operated instrument benefits from the small 3.8 V maximum supply voltage and sleep-oriented architecture, while an industrial controller can use the timers, AES accelerator, analog channels, and extensive GPIO to reduce the number of external components.
PCB design should preserve the exposed-pad thermal and electrical requirements of the 64-QFN package. Place all decoupling capacitors close to their power pins, route sensitive analog signals away from fast digital switching paths, and use a continuous ground reference beneath the device. Confirm peripheral multiplexing and exposed-pad land geometry against the manufacturer pin-description and package drawings before releasing artwork.
This page organizes the device specifications, verified source links, replacement options, application guidance, and design considerations into one engineering reference. It also distinguishes exact drop-in candidates from devices that require software, memory, or peripheral-function review before substitution.
直接替換替代品,適用於 EFM32TG840F16-QFN64T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: EFM32TG840F16-QFN64T (相同外形與佔位) — 差異在於 Flash Memory, Package, Digital I/O Pins, Architecture, Core.
EFM32TG840F16-QFN64
✅ 直接替換聯絡詢價
查看資料表 →EFM32G840F32-QFN64
✅ 直接替換聯絡詢價
查看資料表 →EFM32WG840F64-QFN64T
✅ 直接替換📋 參考替代品(不在目錄中)
EFM32TG840F16-QFN64T 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| RAM Memory | 4 KB (4K x 8) |
| Digital I/O Pins | 56 pins |
| Timer Count | 2 x 16-bit timers |
| Operational Amplifier Count | 3 |
| Security Feature | AES hardware accelerator |
| LCD Support | 8 x 20 character LCD |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Ambient Temperature Range | -40°C to +85°C |
| 封裝 | 64-QFN (9 x 9 mm) |
| 安裝類型 | Surface mount |
| Core Architecture | ARM Cortex-M3 |
| Product Series | Tiny Gecko |
EFM32TG840F16-QFN64T 64-qfn (9 x 9 mm) 腳位配置指南
EFM32TG840F16-QFN64T(64-qfn (9 x 9 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32TG840F16-QFN64T.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32TG840F16-QFN64T 適用於 6 應用s: Industrial Sensor Controller, Connected Energy Meter, Portable Medical Monitor, Battery-Powered IoT Node, Compact HMI Control Panel, Secure Access Controller.
Industrial Sensor Controller
The EFM32TG840F16-QFN64T suits compact industrial sensor nodes that combine conditioning and control in one microcontroller. Its three operational amplifiers can support suitable analog sensor interfaces, while the 32 MHz ARM Cortex-M3 core handles sampling control, digital filtering, and communications. The 56 digital I/O pins reduce the need for an I/O expander, and the 1.85 V to 3.8 V supply range permits operation from low-energy regulated rails. The specified -40°C to +85°C ambient range supports industrial equipment, although calibration, surge protection, isolation, and EMC requirements remain system-level design tasks.
推薦
Connected Energy Meter
The EFM32TG840F16-QFN64T is appropriate for a low-power energy-metering endpoint where measurement, storage, and secure data transfer must coexist in a small package. The 16 KB Flash stores firmware and calibration parameters, while 4 KB RAM supports working state and communication buffers. Its three analog amplifiers can participate in carefully designed front-end measurements, and hardware AES accelerates protected communications. The 32 MHz Cortex-M3 core provides deterministic control without a larger processor, and the low 1.85 V to 3.8 V operating range enables a battery or energy-harvesting power architecture.
推薦
Portable Medical Monitor
The EFM32TG840F16-QFN64T can serve as the control core of a compact portable medical monitoring device when its 16 KB Flash and 4 KB RAM satisfy the application firmware. Its 32 MHz ARM Cortex-M3 architecture supports responsive signal processing and user-interface management, while three operational amplifiers may assist with low-level sensor conditioning when the circuit design satisfies medical signal requirements. The 56 I/O pins support buttons, displays, and status indicators. Hardware AES supports encrypted data handling, but medical certification, electrical safety, patient isolation, and clinical validation remain responsibilities of the complete product design.
推薦
Battery-Powered IoT Node
The EFM32TG840F16-QFN64T fits battery-powered IoT nodes that require local control, analog inputs, and fast wake-up behavior. Tiny Gecko low-energy techniques help the processor spend more time asleep, while the 32 MHz core handles event processing without requiring a high-performance application processor. The three operational amplifiers and 56 I/O pins support compact sensor and actuator interfaces, and hardware AES can accelerate authenticated communication. Its 1.85 V to 3.8 V supply range works with low-energy regulators. Designing the radio, sensors, and power gates separately allows unused subsystems to remain disabled between measurement events.
推薦
Compact HMI Control Panel
The EFM32TG840F16-QFN64T is well suited to compact human-machine interface controllers because it includes support for an 8 x 20 character LCD and provides 56 digital I/O pins. The 32 MHz Cortex-M3 core can manage display updates, input events, and local control logic, while 16 KB Flash accommodates a focused firmware image and 4 KB RAM supports screen and input buffers. Three operational amplifiers can support analog controls or sensor inputs. The 64-QFN 9 x 9 mm package reduces board area, although exposed-pad layout, LCD drive routing, and power sequencing should be planned together.
推薦
Secure Access Controller
The EFM32TG840F16-QFN64T can serve as the central controller in an access-control terminal with keypads, status indicators, and local credential processing. The ARM Cortex-M3 core runs at 32 MHz for responsive user interaction, the 56 I/O pins support multiple digital inputs and outputs, and hardware AES accelerates cryptographic operations. A 16 KB Flash and 4 KB RAM footprint is appropriate for focused access-control firmware, while three operational amplifiers can support auxiliary analog interfaces. The 1.85 V to 3.8 V supply range simplifies integration with low-energy door-controller power systems, subject to transient and surge requirements.
推薦
推薦產品摘要
工程參考資料,適用於 EFM32TG840F16-QFN64T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EFM32TG840F16-QFN64 | EFM32G840F32-QFN64 | EFM32WG840F64-QFN64T |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) | 64-QFN |
| Flash Memory | 16 KB | 16 KB | 32 KB, +100% | 64 KB, +300% |
主要差異化特點
- Exact electrical configuration (對比EFM32G840F32-QFN64)
- Closest matching ordering option (對比EFM32TG840F16-QFN64)
- Integrated analog and security resources (對比EFM32WG840F64-QFN64T)
設計說明
Treat the 64-QFN exposed pad as both a thermal path and an electrical connection specified by the manufacturer. Use the recommended land pattern, place the exposed pad on a solid ground plane, and avoid placing sensitive analog traces directly beneath noisy digital or switching-regulator routes. Confirm pin 1 orientation and pad dimensions against the package drawing before Gerber release.
Design the 1.85 V to 3.8 V supply so startup, transient response, and processor load remain within the device limits. Place the required bulk and high-frequency decoupling capacitors adjacent to their associated supply and ground pins, and use a quiet analog supply strategy if the internal amplifiers drive sensitive measurements. Separate external radio, display, or actuator loads from the MCU rail where practical.
Review the complete peripheral multiplexing table before assigning the 56 digital I/O pins. Analog inputs, timer outputs, communication signals, debug functions, and LCD outputs can share pins, and the usable combination may be narrower than the raw GPIO count. Establish the required simultaneous peripheral set early, then route the highest-bandwidth communication lines away from the operational amplifiers and their reference connections.
Do not substitute a 64-QFN device solely because the package and Cortex-M3 core appear similar. Flash and RAM sizes, peripheral mappings, interrupt behavior, analog functions, and exposed-pad connections can differ across EFM32 families. The EFM32TG840F16-QFN64 is the closest electrically matched candidate, while higher-memory options require firmware, bootloader, and peripheral-level validation.
合規資訊
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the manufacturer and distributor product information. AEC-Q100 is not applicable because the part is not identified as an automotive-qualified device.