Texas Instruments

INA106UG4 - Gain 10 Differential Amplifier | Texas Instruments

MPN: INA106UG4 ✓ 啟用中
8-pin SOIC, 0.154 inch (3.90 mm) width Package
MOQ: 1 |

INA106UG4 概覽

The Texas Instruments INA106UG4 is a precision, fixed-gain differential amplifier with a gain of 10, housed in an 8-pin SOIC package. It integrates a precision operational amplifier with laser-trimmed on-chip metal-film resistors, providing a compact way to amplify small differential signals. The monolithic gain stage is intended for instrumentation systems where a fixed gain of 10 is useful and external resistor matching is undesirable.

A differential amplifier is an analog signal-conditioning circuit that responds to the voltage difference between two inputs while rejecting voltage common to both inputs. In the signal-chain hierarchy, the INA106UG4 belongs to the instrumentation amplifier family, combining differential amplification, fixed-gain accuracy, and common-mode rejection in one integrated package. This simplifies precision measurement designs compared with a discrete operational amplifier and matched external resistor network.

The defining feature of the INA106UG4 is its gain of 10, implemented with on-chip metal-film resistors that are laser trimmed for accurate gain and high common-mode rejection. Excellent resistor tracking maintains gain accuracy and common-mode rejection over temperature. These characteristics make the device appropriate for sensor interfaces, bridge-amplifier signal paths, and instrumentation requiring repeatable differential-to-single-ended conversion.

The INA106 architecture combines a precision operational amplifier with integrated gain-setting elements. Because the gain is fixed internally, designers do not need to select and match external resistors to obtain a gain of 10. The 8-pin SOIC package supports conventional surface-mount assembly and provides a practical option for compact analog boards requiring more integration than a basic single-ended op amp.

Typical uses include low-level sensor conditioning, differential measurement interfaces, industrial instrumentation, and analog test equipment. In a bridge-based measurement, the amplifier can increase the differential bridge output before an ADC or downstream signal-processing stage. Its fixed gain simplifies gain planning, although the complete system must still satisfy input common-mode range, output swing, supply-voltage, and noise requirements.

When laying out an INA106UG4 circuit, use a quiet ground reference and route differential inputs as a compact, symmetrical pair to minimize conversion of common-mode noise into differential error. Place input and output decoupling capacitors according to the manufacturer datasheet and avoid long unprotected traces around high-impedance source nodes. Verify signal polarity before applying large inputs because the fixed gain also amplifies offset and noise.

This product page combines the manufacturer's device description and ordering information with package details, application guidance, parameter-by-parameter comparison, and practical design notes. It helps engineers distinguish the INA106UG4 from other differential-amplifier options while focusing on verified gain, architecture, package, sourcing, and circuit-integration considerations.

直接替換替代品,適用於 INA106UG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

INA106UE4

✅ 直接替換
📦 8-pin SOIC
Same INA106 fixed-gain family and nominal gain of 10 versus 10 (0% nominal gain difference); detailed electrical differences require datasheet verification

📋 參考替代品(不在目錄中)

INA106UG4 最大額定值與電氣特性

Amplifier Type Precision fixed-gain differential amplifier
Number of Circuits 1 circuit
Gain 10 V/V
Gain-Bandwidth Product 1 MHz
封裝 8-pin SOIC, 0.154 inch (3.90 mm) width
安裝類型 Surface mount
Internal Gain Resistors Laser-trimmed on-chip metal-film resistors

INA106UG4 8-pin soic, 0.154 inch (3.90 mm) width 腳位配置指南

INA106UG4(8-pin soic, 0.154 inch (3.90 mm) width 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

INA106UG4 的 8-pin soic, 0.154 inch (3.90 mm) width 封裝腳位圖

無詳細腳位定義資料: INA106UG4.

請參閱 資料表 以查看完整腳位配置。

典型應用

INA106UG4 適用於 6 應用s: Bridge Sensor Signal Conditioning, Precision Industrial Instrumentation, Low-Level Differential Measurement, Analog Test and Measurement, Current and Voltage Shunt Amplification, Audio and Communication Interface Conditioning.

🧩

Bridge Sensor Signal Conditioning

The INA106UG4 fits bridge sensor front ends that produce a small differential voltage requiring a fixed amplification factor of 10. According to the Texas Instruments INA106 datasheet, the laser-trimmed on-chip metal-film resistors support accurate gain and high common-mode rejection, while their close temperature tracking helps preserve gain accuracy. Place the bridge excitation and INA106UG4 power rails from a clean source, route the two bridge nodes as a matched differential pair, and confirm that the sensor output remains within the amplifier's input common-mode range. Because the amplifier has no adjustable gain, engineers should select the bridge and excitation level for the intended fixed gain of 10 rather than relying on external gain calibration.

🏭

Precision Industrial Instrumentation

The INA106UG4 is appropriate for industrial measurement modules that need to raise a low-level differential sensor output before digitization. Its integrated precision operational amplifier and laser-trimmed metal-film gain network eliminate the resistor-matching work normally required by a discrete gain-of-10 stage. The fixed gain also simplifies calibration documentation and board configuration. In a multi-channel instrument, maintain consistent grounding and use matched input routing to prevent PCB leakage and connector noise from becoming differential errors. Validate supply levels, common-mode range, output swing, and bandwidth against the measured transducer and ADC requirements before production release.

📟

Low-Level Differential Measurement

The INA106UG4 can amplify low-level differential measurements where the wanted signal is much smaller than the common-mode voltage present at both input nodes. The manufacturer's INA106 datasheet identifies laser-trimmed internal resistors and excellent resistor tracking as contributors to accurate gain and common-mode rejection. This makes the device useful between sensors and a subsequent measurement or conversion stage. Designers should minimize trace imbalance, keep the input pair away from switching nodes, and verify that source impedance and parasitic capacitance do not degrade the intended 1 MHz bandwidth. Reference and supply grounding should also be planned so that ground offsets do not obscure the differential signal.

🖥️

Analog Test and Measurement

The INA106UG4 is useful in compact test equipment for conditioning a differential source before display, capture, or control circuitry. A fixed gain of 10 provides a straightforward signal path without the external resistor network and matching procedure associated with a discrete implementation. The 8-pin SOIC package allows conventional surface-mount assembly while keeping the analog section compact. For best results, separate sensitive input routing from digital and switching circuitry, use a low-noise ground reference, and define the expected signal bandwidth before adding external filtering. Since the INA106 has a fixed gain rather than a programmable gain, changing measurement range requires input attenuation or another gain stage.

⚡

Current and Voltage Shunt Amplification

The INA106UG4 can serve as the analog gain stage for a shunt-based current measurement or differential voltage sensing system. The differential architecture supports rejection of common-mode voltage present on both shunt nodes, while the fixed gain of 10 raises the measured differential signal for an ADC or comparator. The internal gain resistors are laser trimmed, and their close tracking supports stable common-mode rejection across temperature according to the Texas Instruments INA106 datasheet. Keep the Kelvin connections compact and avoid sharing sensitive shunt paths with high-current return wiring. Also verify that the shunt voltage, ground offsets, and operating common-mode level remain inside the device's electrical limits.

🌐

Audio and Communication Interface Conditioning

The INA106UG4 can condition a small balanced signal when a fixed gain of 10 and high common-mode rejection are more important than adjustable gain. Its monolithic architecture integrates the precision operational amplifier and laser-trimmed metal-film resistor network, producing a compact analog channel for balanced inputs. In an audio or communications board, preserve symmetry between the positive and negative signal paths and keep return currents away from the input reference. Confirm that the source amplitude does not exceed the input or output limits, and account for the bandwidth when processing higher-rate links. A balanced downstream stage may also require correct polarity handling because inversion or gain errors are multiplied by ten.

What is the INA106UG4?
The INA106UG4 is a precision, fixed-gain differential amplifier with a gain of 10 in an 8-pin SOIC package. According to the Texas Instruments INA106 datasheet, it combines a precision operational amplifier with on-chip metal-film resistors that are laser trimmed for accurate gain and high common-mode rejection. It is intended for instrumentation and measurement circuits that require a fixed differential gain without an external matched resistor network.
What is the gain of INA106UG4?
The INA106UG4 has a fixed gain of 10 V/V. According to the Texas Instruments INA106 datasheet, its gain-setting network consists of on-chip metal-film resistors rather than external resistors. Laser trimming supports accurate gain and high common-mode rejection, while the close tracking of the internal resistors helps preserve performance over temperature. This fixed gain makes the device suitable for small differential-signal conditioning.
Where can I download the INA106UG4 datasheet PDF?
The official INA106UG4 datasheet PDF is available from the Texas Instruments document link on this page at https://www.ti.com/lit/ds/symlink/ina106.pdf. The manufacturer document describes the precision gain-of-10 differential amplifier, its laser-trimmed internal metal-film resistors, package options, electrical characteristics, and application information. Use this document for final pin assignments, recommended operating conditions, and PCB design decisions.
Where can I find the INA106UG4 pinout?
The INA106UG4 pinout is documented in the pin-configuration section of the Texas Instruments INA106 datasheet. The part is an 8-pin SOIC, also identified in product listings as 8-SOIC with a 0.154-inch, or 3.90-mm, body width. Use the manufacturer pin-description table when assigning input, output, supply, and ground nets, and follow the package drawing shown in that table for physical board layout.
What are the key specifications of INA106UG4 that engineers should know?
The INA106UG4 is a one-circuit, precision differential amplifier with a fixed gain of 10, a 1 MHz bandwidth, and an 8-pin SOIC package. According to the Texas Instruments INA106 datasheet, its precision operational amplifier is combined with laser-trimmed, on-chip metal-film resistors. Those internal resistors provide accurate gain and high common-mode rejection while eliminating the need for a matched external gain network.
How does the INA106UG4 differ from a discrete op amp gain stage?
The INA106UG4 integrates both the precision operational amplifier and the gain-setting resistors into one monolithic device. According to the Texas Instruments INA106 datasheet, the internal metal-film resistors are laser trimmed for accurate gain and high common-mode rejection. A discrete stage normally requires resistor selection and matching, so the integrated part can simplify assembly and reduce variation caused by poorly matched external components.
Is the INA106UG4 suitable for bridge sensor interfaces?
The INA106UG4 is suitable for bridge sensor interfaces when its electrical limits match the sensor excitation, common-mode voltage, and signal bandwidth. Its fixed gain of 10 amplifies the differential bridge output while its laser-trimmed internal resistors support accurate gain and common-mode rejection. According to the Texas Instruments INA106 datasheet, the gain remains stable because the internal resistors track closely over temperature.
When should I choose the INA106UG4 instead of a general-purpose differential amplifier?
Choose the INA106UG4 when the required differential gain is exactly 10 and using an integrated fixed-gain device is preferable to external resistor matching. According to the Texas Instruments INA106 datasheet, the laser-trimmed on-chip resistors support accurate gain and high common-mode rejection. If the gain must be adjustable, a different instrumentation amplifier topology may be more appropriate even if the input signal level is otherwise compatible.
Can the INA106UG4 replace a discrete gain-of-10 op amp circuit?
The INA106UG4 can replace a discrete gain-of-10 stage only after checking pin functions, supply requirements, common-mode range, output swing, bandwidth, and stability in the complete circuit. Its gain is 10, and the Texas Instruments INA106 datasheet identifies laser-trimmed internal metal-film resistors for accurate gain and common-mode rejection. A footprint-compatible footprint alone does not establish functional equivalence.
What is the best drop-in replacement for INA106UG4?
INA106UE4 is the closest identified same-family replacement candidate because it is compared with INA106UG4 in a dedicated specification comparison and is associated with the INA106 fixed-gain differential-amplifier family. The retrieved listing does not disclose every electrical difference, so engineers should compare pin functions and all operating limits against the manufacturer datasheets before treating it as a drop-in replacement. Use the Request a Quote form on this page for current sourcing.
Is INA106UG4 the same as INA106UE4?
INA106UG4 and INA106UE4 are related INA106-family precision differential amplifiers, but they are not proven identical solely by their family names. The retrieved comparison listing groups them for parameter review, while the available product listing identifies INA106UG4 as an 8-SOIC gain-of-10 device. Confirm pinout, electrical limits, temperature range, and ordering details for INA106UE4 before using it as a direct substitute.
What can replace INA106UG4?
INA106UE4 is a documented same-family replacement candidate for INA106UG4 because a dedicated comparison listing explicitly includes both MPNs. It should be considered only after verifying that its 8-pin package, pin functions, supply range, input common-mode range, output swing, gain accuracy, and bandwidth satisfy the target circuit. The candidate is sourced from the retrieved cross-reference comparison; no additional cross-brand drop-in equivalent was established.
Where to buy INA106UG4 online?
Use the Request a Quote form on this page to request current availability, lead time, and order handling for INA106UG4. The form provides a direct response channel without relying on a static listing or potentially stale inventory figure. For technical confirmation, use the official Texas Instruments product page and the linked manufacturer datasheet. Lead time and allocation should be confirmed at the time of the request.
What is the price of INA106UG4?
Current INA106UG4 pricing is handled through the Request a Quote form on this page rather than a static price table. This approach reflects the exact order configuration, quantity, and supply position at quotation time. For technical qualification, confirm the precise MPN, 8-pin SOIC package, and required quantity when submitting the request so the commercial response matches the intended build.
What is the lead time and stock status for INA106UG4?
Current lead time and stock status for INA106UG4 should be requested through the Request a Quote form on this page. Availability can change with order quantity and manufacturing conditions, so a previous inventory snapshot is not a reliable purchasing commitment. Include the required quantity, target date, and whether reels or another approved packing format are needed when requesting the quotation.
Is there a Texas Instruments equivalent for INA106UG4?
INA106UE4 is the identified Texas Instruments same-family equivalent candidate for INA106UG4, based on a retrieved specification-comparison listing that explicitly pairs the two MPNs. The retrieved material does not establish every operating parameter as identical, so it should not be treated as an automatic substitute. Compare the pin descriptions and complete electrical specifications from the manufacturer documentation before approving a replacement.

工程參考資料,適用於 INA106UG4 — 比較、設計指引及合規資訊。

選型指南

Choose the INA106UG4 when the required differential gain is exactly 10 and the design benefits from a compact, integrated precision gain stage. Its laser-trimmed internal metal-film resistors remove the need to match external gain resistors and help preserve gain accuracy and common-mode rejection over temperature. It is especially suitable for bridge sensors, shunt measurements, and precision instrumentation where a small differential signal must be conditioned before conversion or comparison. Consider INA106UE4 when its complete pinout, electrical ratings, and ordering information confirm compatibility with the installed circuit. Do not substitute it solely because it belongs to the same family; check supply voltage, common-mode range, output swing, gain error, bandwidth, and temperature limits. If the required gain must vary, use an adjustable instrumentation-amplifier topology instead. Likewise, choose a higher-bandwidth or lower-noise amplifier when the signal chain cannot operate within the INA106's 1 MHz bandwidth or other stated limits.

與替代品比較

參數 本產品 INA106UE4
Package 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments
Amplifier Type Precision fixed-gain differential amplifier INA106-family fixed-gain differential amplifier
Nominal Gain 10 V/V 10 V/V

主要差異化特點

  • Integrated precision gain-of-10 signal path (對比INA106UE4)
  • No external gain-resistor matching required (對比INA106UE4)
  • Temperature-stable internal resistor tracking (對比INA106UE4)

設計說明

Route the two INA106UG4 input signals as a compact, symmetric differential pair and provide a direct, low-impedance return path for the amplifier ground. Keep the pair away from switching nodes, relay contacts, motor traces, and digital clock lines because the fixed gain of 10 also amplifies any differential disturbance coupled into the inputs.

Do not assume that a gain-of-10 signal remains usable if the source exceeds the input common-mode range or if the output is driven outside its voltage-swing limits. Check both amplifier limits and the downstream ADC or comparator range under minimum supply and maximum signal conditions. A valid common-mode voltage can still produce an invalid output if insufficient output headroom remains.

Evaluate source impedance together with the 1 MHz gain-bandwidth product and any board capacitance. High source impedance can create an input-noise and phase-error contribution, while long traces can increase leakage and susceptibility to interference. Keep input nodes compact, provide local supply bypassing, and use a continuous ground reference under the analog section.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The INA106UG4 is an analog instrumentation amplifier rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the retrieved manufacturer and distributor pages.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

INA106UG4 datasheet INA106UG4 datasheet pdf INA106UG4 pinout INA106UG4 equivalent INA106UG4 replacement INA106UG4 cross reference INA106UG4 price INA106UG4 stock Texas Instruments INA106UG4 INA106UG4 SOIC pinout INA106UG4 vs INA106UE4 INA106UG4 bridge amplifier

相關元件與詞彙

Texas Instruments INA106UG4 INA106UE4 precision differential amplifier instrumentation amplifier differential amplifier fixed-gain amplifier precision operational amplifier low-dropout regulator linear regulator voltage regulator power management IC semiconductor gain of 10 common-mode rejection ratio CMRR laser-trimmed metal-film resistor temperature coefficient tracking gain-bandwidth product 1 MHz bandwidth 8-pin SOIC SOIC family surface-mount package bridge sensor shunt measurement industrial instrumentation
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情