INA106UG4 - Gain 10 Differential Amplifier | Texas Instruments
MPN: INA106UG4 ✓ Hoạt độngINA106UG4 Tóm tắt
A differential amplifier is an analog signal-conditioning circuit that responds to the voltage difference between two inputs while rejecting voltage common to both inputs. In the signal-chain hierarchy, the INA106UG4 belongs to the instrumentation amplifier family, combining differential amplification, fixed-gain accuracy, and common-mode rejection in one integrated package. This simplifies precision measurement designs compared with a discrete operational amplifier and matched external resistor network.
The defining feature of the INA106UG4 is its gain of 10, implemented with on-chip metal-film resistors that are laser trimmed for accurate gain and high common-mode rejection. Excellent resistor tracking maintains gain accuracy and common-mode rejection over temperature. These characteristics make the device appropriate for sensor interfaces, bridge-amplifier signal paths, and instrumentation requiring repeatable differential-to-single-ended conversion.
The INA106 architecture combines a precision operational amplifier with integrated gain-setting elements. Because the gain is fixed internally, designers do not need to select and match external resistors to obtain a gain of 10. The 8-pin SOIC package supports conventional surface-mount assembly and provides a practical option for compact analog boards requiring more integration than a basic single-ended op amp.
Typical uses include low-level sensor conditioning, differential measurement interfaces, industrial instrumentation, and analog test equipment. In a bridge-based measurement, the amplifier can increase the differential bridge output before an ADC or downstream signal-processing stage. Its fixed gain simplifies gain planning, although the complete system must still satisfy input common-mode range, output swing, supply-voltage, and noise requirements.
When laying out an INA106UG4 circuit, use a quiet ground reference and route differential inputs as a compact, symmetrical pair to minimize conversion of common-mode noise into differential error. Place input and output decoupling capacitors according to the manufacturer datasheet and avoid long unprotected traces around high-impedance source nodes. Verify signal polarity before applying large inputs because the fixed gain also amplifies offset and noise.
This product page combines the manufacturer's device description and ordering information with package details, application guidance, parameter-by-parameter comparison, and practical design notes. It helps engineers distinguish the INA106UG4 from other differential-amplifier options while focusing on verified gain, architecture, package, sourcing, and circuit-integration considerations.
Bộ thay thế dễ dàng lắp đặt cho INA106UG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
INA106UE4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
INA106UG4 Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Precision fixed-gain differential amplifier |
| Number of Circuits | 1 circuit |
| Gain | 10 V/V |
| Gain-Bandwidth Product | 1 MHz |
| Hộp | 8-pin SOIC, 0.154 inch (3.90 mm) width |
| Kiểu lắp đặt | Surface mount |
| Internal Gain Resistors | Laser-trimmed on-chip metal-film resistors |
Hướng dẫn cấu hình chân INA106UG4 8-pin soic, 0.154 inch (3.90 mm) width
Cấu hình chân cho INA106UG4 (8-pin soic, 0.154 inch (3.90 mm) width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho INA106UG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
INA106UG4 phù hợp cho 6 Áp dụngs: Bridge Sensor Signal Conditioning, Precision Industrial Instrumentation, Low-Level Differential Measurement, Analog Test and Measurement, Current and Voltage Shunt Amplification, Audio and Communication Interface Conditioning.
Bridge Sensor Signal Conditioning
The INA106UG4 fits bridge sensor front ends that produce a small differential voltage requiring a fixed amplification factor of 10. According to the Texas Instruments INA106 datasheet, the laser-trimmed on-chip metal-film resistors support accurate gain and high common-mode rejection, while their close temperature tracking helps preserve gain accuracy. Place the bridge excitation and INA106UG4 power rails from a clean source, route the two bridge nodes as a matched differential pair, and confirm that the sensor output remains within the amplifier's input common-mode range. Because the amplifier has no adjustable gain, engineers should select the bridge and excitation level for the intended fixed gain of 10 rather than relying on external gain calibration.
Precision Industrial Instrumentation
The INA106UG4 is appropriate for industrial measurement modules that need to raise a low-level differential sensor output before digitization. Its integrated precision operational amplifier and laser-trimmed metal-film gain network eliminate the resistor-matching work normally required by a discrete gain-of-10 stage. The fixed gain also simplifies calibration documentation and board configuration. In a multi-channel instrument, maintain consistent grounding and use matched input routing to prevent PCB leakage and connector noise from becoming differential errors. Validate supply levels, common-mode range, output swing, and bandwidth against the measured transducer and ADC requirements before production release.
Low-Level Differential Measurement
The INA106UG4 can amplify low-level differential measurements where the wanted signal is much smaller than the common-mode voltage present at both input nodes. The manufacturer's INA106 datasheet identifies laser-trimmed internal resistors and excellent resistor tracking as contributors to accurate gain and common-mode rejection. This makes the device useful between sensors and a subsequent measurement or conversion stage. Designers should minimize trace imbalance, keep the input pair away from switching nodes, and verify that source impedance and parasitic capacitance do not degrade the intended 1 MHz bandwidth. Reference and supply grounding should also be planned so that ground offsets do not obscure the differential signal.
Analog Test and Measurement
The INA106UG4 is useful in compact test equipment for conditioning a differential source before display, capture, or control circuitry. A fixed gain of 10 provides a straightforward signal path without the external resistor network and matching procedure associated with a discrete implementation. The 8-pin SOIC package allows conventional surface-mount assembly while keeping the analog section compact. For best results, separate sensitive input routing from digital and switching circuitry, use a low-noise ground reference, and define the expected signal bandwidth before adding external filtering. Since the INA106 has a fixed gain rather than a programmable gain, changing measurement range requires input attenuation or another gain stage.
Current and Voltage Shunt Amplification
The INA106UG4 can serve as the analog gain stage for a shunt-based current measurement or differential voltage sensing system. The differential architecture supports rejection of common-mode voltage present on both shunt nodes, while the fixed gain of 10 raises the measured differential signal for an ADC or comparator. The internal gain resistors are laser trimmed, and their close tracking supports stable common-mode rejection across temperature according to the Texas Instruments INA106 datasheet. Keep the Kelvin connections compact and avoid sharing sensitive shunt paths with high-current return wiring. Also verify that the shunt voltage, ground offsets, and operating common-mode level remain inside the device's electrical limits.
Audio and Communication Interface Conditioning
The INA106UG4 can condition a small balanced signal when a fixed gain of 10 and high common-mode rejection are more important than adjustable gain. Its monolithic architecture integrates the precision operational amplifier and laser-trimmed metal-film resistor network, producing a compact analog channel for balanced inputs. In an audio or communications board, preserve symmetry between the positive and negative signal paths and keep return currents away from the input reference. Confirm that the source amplitude does not exceed the input or output limits, and account for the bandwidth when processing higher-rate links. A balanced downstream stage may also require correct polarity handling because inversion or gain errors are multiplied by ten.
Dữ liệu tham khảo kỹ thuật cho INA106UG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | INA106UE4 |
|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments |
| Amplifier Type | Precision fixed-gain differential amplifier | INA106-family fixed-gain differential amplifier |
| Nominal Gain | 10 V/V | 10 V/V |
Bảo phân biệt quan trọng
- Integrated precision gain-of-10 signal path (vsINA106UE4)
- No external gain-resistor matching required (vsINA106UE4)
- Temperature-stable internal resistor tracking (vsINA106UE4)
Ghi chú thiết kế
Route the two INA106UG4 input signals as a compact, symmetric differential pair and provide a direct, low-impedance return path for the amplifier ground. Keep the pair away from switching nodes, relay contacts, motor traces, and digital clock lines because the fixed gain of 10 also amplifies any differential disturbance coupled into the inputs.
Do not assume that a gain-of-10 signal remains usable if the source exceeds the input common-mode range or if the output is driven outside its voltage-swing limits. Check both amplifier limits and the downstream ADC or comparator range under minimum supply and maximum signal conditions. A valid common-mode voltage can still produce an invalid output if insufficient output headroom remains.
Evaluate source impedance together with the 1 MHz gain-bandwidth product and any board capacitance. High source impedance can create an input-noise and phase-error contribution, while long traces can increase leakage and susceptibility to interference. Keep input nodes compact, provide local supply bypassing, and use a continuous ground reference under the analog section.
Thông tin tuân thủ
The INA106UG4 is an analog instrumentation amplifier rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established from the retrieved manufacturer and distributor pages.