Texas Instruments

INA117SMQ - High Common-Mode Differential Amplifier | Texas Instruments

MPN: INA117SMQ ✓ 啟用中
-200 V to +200 V Vdss TO-99-8 metal can Package
MOQ: 1 |

INA117SMQ 概覽

The Texas Instruments INA117SMQ is a precision unity-gain difference amplifier with a common-mode input voltage range of ±200 V, 200 kHz bandwidth, and an 8-pin TO-99 metal-can package. It combines a precision operational amplifier with an integrated thin-film resistor network to measure small differential voltages while rejecting large common-mode signals. The device operates from single or dual supplies and is specified over a -40°C to +85°C temperature range.

A difference amplifier is a specialized analog signal-conditioning IC that subtracts two input voltages and amplifies the difference by a fixed gain. In the precision unity-gain configuration used by the INA117 family, the common-mode signal is rejected by the matched resistor network rather than being amplified. This places the INA117 hierarchy within precision difference amplifiers, instrumentation signal-conditioning circuits, analog amplifiers, and the broader semiconductor category.

Key features include a ±200 V common-mode input range, unity differential gain, and a 200 kHz bandwidth. The high common-mode capability allows the amplifier to operate on battery, industrial, automotive, or power-system voltages without requiring the inputs to remain close to ground. The monolithic thin-film network also provides stable matching between the input resistors, which improves common-mode rejection and repeatability compared with discrete resistor networks.

Technically, the INA117 is designed for accurate differential measurement rather than high-speed signal processing. Its 200 kHz bandwidth supports measurements in power-conversion, motor-control, battery-monitoring, and industrial-control systems, but it is not intended for video-frequency amplification. Input protection is especially important because the common-mode rating describes the intended signal range and does not replace correct supply, absolute-maximum, and transient-voltage analysis.

Typical applications include high-side current sensing, power-supply current monitoring, battery-pack measurement, motor-control feedback, and high-voltage instrumentation. Designers commonly place the device between a sensing resistor and an analog-to-digital converter so that a small differential voltage can be measured while a much larger common-mode voltage is rejected.

The primary design consideration is protecting the input stage from transients and exceeding the device's absolute-maximum ratings. Keep input routing short, use suitable input attenuation or clamping networks, and reference the output carefully for single-supply operation. Stable operation also depends on maintaining the specified supply voltage and avoiding excessive input impedance asymmetry at the two inputs.

This product page combines the INA117 family specifications with practical guidance on high-common-mode sensing, package considerations, input protection, and qualified drop-in alternatives. It is intended to help engineers identify whether the TO-99 packaged INA117SMQ fits a high-voltage measurement design and what parameters must be checked before substitution.

直接替換替代品,適用於 INA117SMQ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: INA117SMQ (相同外形與佔位) — 差異在於 Package, Mounting Type, Product Type, Number of Channels, Operating Temperature Range.

Texas Instruments
Package: TO-99-8
Product Type: High common-mode voltage difference amplifier
比較對象 INA117SMQ →
Texas Instruments
Package: 8-SOIC
Mounting Type: Surface Mount
Number of Channels: 1
比較對象 INA117SMQ →

INA117SM

✅ 直接替換
Texas Instruments
📦 TO-99-8
High common-mode voltage difference amplifier · 1 circuit · Unity gain · 0.001% · 200 kHz · 500 kHz · -40°C to 85°C · -55°C to 125°C

聯絡詢價

查看資料表 →

INA149AIPG

✅ 直接替換 ⚠️ 規格未經驗證
📦 TO-99-8
Higher-voltage alternative for some high-common-mode applications; exact CMRR, offset, bandwidth, and supply differences require validation

📋 參考替代品(不在目錄中)

INA149N

✅ 直接替換
Texas Instruments
📦 TO-99-8
Precision unity-gain difference amplifier · 1 V/V (unity) · ±275 V · 1 · Precision op amp + integrated thin-film resistor network · Protected from momentary voltage surges · 8-SOIC · -40C to +125C

聯絡詢價

查看資料表 →

INA117SMQ 最大額定值與電氣特性

Product Type Precision unity-gain difference amplifier
Common-Mode Input Voltage Range -200 V to +200 V
Differential Gain 1 V/V unity gain
Bandwidth 200 kHz
Number of Channels 1 channel
腳位數 8 pins
封裝 TO-99-8 metal can
安裝類型 Through-hole
工作溫度範圍 -40°C to +85°C
Resistor Network Integrated thin-film resistor network
Internal Amplifier Single precision operational amplifier
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown

INA117SMQ to-99-8 metal can 腳位配置指南

INA117SMQ(to-99-8 metal can 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

INA117SMQ 的 to-99-8 metal can 封裝腳位圖

無詳細腳位定義資料: INA117SMQ.

請參閱 資料表 以查看完整腳位配置。

典型應用

INA117SMQ 適用於 6 應用s: High-Side Power Current Sensing, Battery-Pack Monitoring, Motor-Control Feedback, Industrial Power-Line Monitoring, Power-Supply Feedback, Precision High-Voltage Instrumentation.

⚡

High-Side Power Current Sensing

The INA117SMQ fits high-side current measurement because it can tolerate a common-mode input range of ±200 V while responding to the small differential voltage produced by a shunt. Place the shunt terminals on the two amplifier inputs and use the amplifier output as the scaled shunt voltage. This arrangement prevents the large load voltage from being amplified directly. Before implementation, verify the transient profile, shunt excitation, and output swing against the Texas Instruments electrical characteristics.

🔋

Battery-Pack Monitoring

INA117SMQ can measure a low-level differential battery-monitor signal when the common pack voltage falls within its ±200 V range. The integrated thin-film resistor network and unity-gain architecture are useful when both sensor inputs share a substantial common-mode voltage. The amplifier should sit close to the sensing element to limit noise pickup, while surge and load-dump protection remain external design functions. Verify operating temperature, supply voltage, and the converter interface used to digitize the output.

🏭

Motor-Control Feedback

The INA117SMQ is appropriate for low-bandwidth motor-control feedback signals that combine a small differential measurement with a larger switching-node voltage. Its 200 kHz bandwidth can represent control-loop information without targeting video-bandwidth amplification. Place the device near the current or position sensor, maintain symmetrical input routing, and confirm that motor-switching transients do not exceed the input limits. The exact response requirement should be compared with the device's offset, noise, and bandwidth characteristics.

🏭

Industrial Power-Line Monitoring

INA117SMQ supports industrial monitoring circuits that must distinguish a small voltage across a power conductor from a much larger line potential. The ±200 V common-mode range is useful in systems below that boundary, while the precision unity-gain structure avoids the resistor mismatch found in discrete difference stages. Use input clamping for switching and fault transients, and reference the output appropriately for the selected supply arrangement. Confirm isolation, safety, and protection requirements separately from signal conditioning.

⚡

Power-Supply Feedback

The INA117SMQ can condition feedback from a high-side current or voltage-sense element in a power-conversion system. Its unity differential gain preserves the measured difference while the integrated thin-film network suppresses the common component. This is useful when the converter node rises well above signal-ground level. Select the supply rails to support the required output range, decouple the amplifier close to its pins, and verify that switching overshoot remains within the device's allowable input and supply conditions.

📺

Precision High-Voltage Instrumentation

INA117SMQ is suited to instrumentation that measures low-level differential signals superimposed on voltages approaching the ±200 V common-mode boundary. The monolithic thin-film network provides matched resistance within the device, supporting repeatable difference measurements. Input impedance, offset, and CMRR determine how much error appears at the output, so the source impedances should remain close and balanced. For signals outside the rating, select a higher-range amplifier or redesign the front end with attenuation and isolation.

推薦產品摘要

INA117SM Texas Instruments 用於: High-Side Power Current Sensing, Battery-Pack Monitoring, Motor-Control Feedback, Power-Supply Feedback, Precision High-Voltage Instrumentation INA149AIPG Higher-range TO-99 difference-amplifier option 用於: High-Side Power Current Sensing, Motor-Control Feedback, Industrial Power-Line Monitoring, Precision High-Voltage Instrumentation INA149 Related high-common-mode difference amplifier 用於: Battery-Pack Monitoring, Industrial Power-Line Monitoring, Power-Supply Feedback
What is the INA117SMQ?
The INA117SMQ is a precision unity-gain difference amplifier designed to measure small differential voltages in the presence of common-mode signals up to ±200 V. According to the Texas Instruments INA117 datasheet, the device combines a precision operational amplifier with an integrated thin-film resistor network and is packaged in an 8-pin TO-99 metal can.
What are the key specifications of INA117SMQ that engineers should know?
The INA117SMQ provides a ±200 V common-mode input range, unity differential gain, 200 kHz bandwidth, one amplifier channel, and an 8-pin TO-99 package. The Texas Instruments datasheet also specifies operation from -40°C to +85°C. These characteristics make the device suitable for high-voltage differential measurements where precision signal cancellation is more important than high-frequency performance.
What is the common-mode voltage range of INA117SMQ?
The INA117SMQ accepts common-mode input voltages from -200 V to +200 V. According to the Texas Instruments INA117 datasheet, this range allows small differential signals to be measured in the presence of substantially larger common-mode voltages. Designers must still observe the absolute-maximum input rating and use suitable transient protection for practical high-energy circuits.
Where can I download the INA117SMQ datasheet PDF?
The official INA117SMQ datasheet PDF is available from the Texas Instruments document link on this page. The document contains the ordering information, electrical characteristics, application circuit, pin descriptions, and details for the INA117AM, INA117BM, INA117SM, and INA117SMQ variants. Use the manufacturer PDF for final pin assignments, ratings, and design limits.
Where can I find the INA117SMQ pinout?
The INA117SMQ pinout is shown in the pin-configuration section of the official Texas Instruments INA117 datasheet. The component uses an 8-pin TO-99 metal-can package, which is not represented by a dedicated standard package drawing in this product page. Use the manufacturer pin-description table and the physical metal-can orientation marking when assigning PCB connections.
Can INA117SMQ measure current across a high-side shunt?
Yes, the INA117SMQ is suitable for high-side current sensing because it rejects common-mode voltage while measuring the small voltage across a shunt resistor. Its ±200 V common-mode range supports many power-system measurements. Confirm the shunt voltage, input transient exposure, supply arrangement, and output range against the Texas Instruments electrical-characteristics tables before finalizing the circuit.
Is INA117SMQ suitable for battery monitoring?
The INA117SMQ can measure small differential voltages in battery-management systems when the pack voltage lies within its ±200 V common-mode range. Its unity-gain difference-amplifier architecture helps reject the battery voltage shared by both shunt inputs. Protection components may still be required for load dump, hot-plug, and other automotive or industrial transients.
INA117SMQ vs INA149AIPG - which is better for high-voltage sensing?
The INA117SMQ is the better choice when the required common-mode range does not exceed ±200 V and unity differential gain is sufficient. The INA149AIPG is relevant when the measurement exceeds that range and its electrical characteristics satisfy the design. Both use an 8-pin TO-99-style footprint, but substitution requires checking bandwidth, gain accuracy, CMRR, supply range, and absolute-maximum limits.
What is the difference between INA117SMQ and INA117SM?
The INA117SM and INA117SMQ belong to the same Texas Instruments INA117 family and use the same 8-pin TO-99 package. Their exact ordering qualifiers differ, so production environments should confirm qualification, marking, and procurement requirements before substitution. The INA117SMQ is the designated target part and should be preferred when its ordering specification is required.
When should I choose INA117SMQ over INA149AIPG?
Choose the INA117SMQ when the common-mode signal is at or below ±200 V, unity gain is adequate, and a precision difference-amplifier function is required. Consider the INA149AIPG when the signal range or electrical behavior of the higher-range amplifier is necessary. The final choice should follow a complete comparison of CMRR, offset, bandwidth, supply voltage, and transient ratings.
Is INA117SMQ suitable for motor-control feedback?
The INA117SMQ is suitable for many low-bandwidth motor-control feedback measurements because it offers a ±200 V common-mode range and 200 kHz bandwidth. It is especially useful when the current or position sensor produces a small differential signal over a large switching or battery common-mode voltage. Validate the sensor output, switching transient environment, and required response time.
What can replace INA117SMQ?
A true drop-in replacement must use the same 8-pin TO-99 footprint, preserve pin assignments, and provide compatible input range, gain, bandwidth, supply, and accuracy. INA117SM is the closest same-family choice, while INA149AIPG can cover some higher-range applications. Validate the complete electrical specification and transient requirements before treating either option as a replacement.
What is the best cross-brand equivalent for INA117SMQ?
No cross-brand drop-in equivalent is established because the available comparison information does not document a competing part with the same 8-pin TO-99 pin mapping and verified electrical performance. A substitute should not be selected from a broad parametric list alone. Confirm package drawing, pinout, common-mode range, CMRR, offset, bandwidth, supply voltage, and noise against the Texas Instruments INA117 datasheet.
Is INA117SMQ currently available for quotation?
Current commercial availability, production quantity, and lead time should be requested through the Request a Quote form on this page. The official Texas Instruments product page provides ordering and quality information for the INA117 family. For a production release, obtain the exact MPN, package marking, and a delivery commitment tied to your build schedule.
How much does INA117SMQ cost?
Current commercial pricing for the INA117SMQ should be obtained through the Request a Quote form on this page because quotations can depend on quantity, production packaging, and supply status. The form is the appropriate route for a current purchase and delivery schedule. Engineers should also request lot traceability and any qualification documentation required by their quality system.
Where can I buy INA117SMQ and what is its lead time?
Use the Request a Quote form on this page to request INA117SMQ price, stock confirmation, minimum order quantity, and lead time. The manufacturer lists the INA117 family in 8-pin package options, but a current project-specific delivery commitment must be established before scheduling production. Include the required date and quantity in the request.

工程參考資料,適用於 INA117SMQ — 比較、設計指引及合規資訊。

選型指南

Choose the INA117SMQ when the design requires a precision unity-gain difference amplifier, a ±200 V common-mode operating range, and a 200 kHz bandwidth in an 8-pin TO-99 package. It is a strong fit for high-side shunt sensing, battery monitoring, power-supply feedback, and industrial measurements whose signal levels remain within the device's limits. Choose INA117SM when the same electrical family and package meet the required ordering qualifiers. Consider INA149AIPG or INA149 when the measurement requires a wider common-mode range, but verify gain, CMRR, offset, bandwidth, supply requirements, and pin mapping. No cross-brand TO-99 substitute should be approved from package appearance alone. For every option, confirm absolute-maximum ratings, transient protection, temperature range, supply arrangement, output range, and the output load presented by the following circuit.

與替代品比較

參數 本產品 INA117SM INA149AIPG INA149
Package TO-99-8 TO-99-8 TO-99-8 TO-99-8
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Pin Count 8 pins 8 pins 8 pins 8 pins

主要差異化特點

  • Precision differential measurement with a high common-mode boundary (對比INA149AIPG)
  • Direct same-family ordering alternative in the original metal-can package (對比INA117SM)
  • Integrated matched thin-film network (對比INA149)

設計說明

Treat the ±200 V common-mode rating as an operating range, not as permission to expose the inputs to arbitrary transients. Review the absolute-maximum input voltage and supply limits in the Texas Instruments datasheet, then add series resistance, clamps, or other protection appropriate to the source. A protection network must preserve differential accuracy while limiting surge current into the amplifier.

Route the two difference inputs as a closely coupled pair and keep them away from switching nodes and high-current paths. Match source impedances where practical because unequal impedances can unbalance the integrated network and degrade common-mode rejection. Place the device near the sensing element, minimize input-loop area, and provide local supply bypassing according to the manufacturer application circuit.

The 200 kHz bandwidth is appropriate for power-measurement and industrial-control loops but limits rapid transient capture. If the input waveform contains significant energy above that bandwidth, the amplifier may introduce phase delay or attenuation in the control loop. Evaluate the complete signal chain against the required loop bandwidth and use a higher-bandwidth amplifier when waveform fidelity is more important than high common-mode tolerance.

Do not assume that a common TO-99 outline guarantees a drop-in substitution. Compare pin numbers, reference connection, supply range, gain accuracy, offset voltage, CMRR, bandwidth, and absolute-maximum ratings. The INA117SM and INA149 family options are relevant starting points, but each must satisfy the complete signal-chain requirements before schematic and layout reuse is approved.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations and qualification details are not stated on the product pages listed for this part. Confirm the current manufacturer declarations and project-specific qualification requirements before release.

相關搜尋

INA117SMQ datasheet INA117SMQ datasheet pdf INA117SMQ pinout INA117SMQ specifications INA117SMQ equivalent INA117SMQ replacement INA117SMQ TO-99-8 INA117SMQ common mode range INA117SMQ high side current sensing INA117SMQ vs INA149 INA117SMQ price INA117SMQ stock Texas Instruments INA117SMQ INA117SMQ difference amplifier

相關元件與詞彙

Texas Instruments INA117SMQ INA117 INA117SM INA149 INA149AIPG difference amplifier precision difference amplifier unity-gain amplifier instrumentation amplifier analog amplifier semiconductor common-mode voltage common-mode rejection ratio CMRR thin-film resistor network precision operational amplifier TO-99-8 TO-99 metal can through-hole package high-side current sensing battery monitoring motor-control feedback power-supply feedback
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情