ISO1430BDW - 12Mbps Isolated RS-485/RS-422 | Texas Instruments
MPN： ISO1430BDW ✓ 啟用中| 數量 | 單價 | 小計 |
|---|---|---|
| 1 | $7.875 | $7.88 |
| 10 | $5.6875 | $56.88 |
| 100 | $5.0313 | $503.13 |
| 500 | $4.8125 | $2,406.25 |
| 1,000 | $4.5938 | $4,593.80 |
ISO1430BDW 概覽
直接替換替代品，適用於 ISO1430BDW — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： ISO1430BDW （相同外形與佔位） — 差異在於 EMC Protection, Package.
快速比較工具 — 選擇替代零件進行並排比較：
ISO1430DWR
聯絡詢價
查看資料表 →ISO1410DWR
聯絡詢價
查看資料表 →ISO1430BDW 規格
| Product Type | Galvanically isolated RS-485/RS-422 transceiver |
| Signaling Rate | 12 Mbps |
| Operating Mode | Half-duplex |
| Isolation Rating | 5 kVrms |
| Standards Supported | TIA/EIA RS-485 and TIA/EIA RS-422 |
| Channel Count | 1 transceiver |
| 封裝 | 16-pin wide-body SOIC |
| EMC Protection | EMC-protected bus pins |
| Isolation Technology | Silicon-dioxide-based capacitive isolation |
| RoHS 狀態 | Compliant per manufacturer product-page information |
| Automotive Qualification | Not applicable or not stated in the provided data |
| 安裝類型 | Surface mount |
| Datasheet | Manufacturer ISO1430 datasheet |
ISO1430BDW 16-pin wide-body soic 腳位配置指南
ISO1430BDW（16-pin wide-body soic 封裝）的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料： ISO1430BDW.
請參閱 資料表 以查看完整腳位配置。
典型應用
ISO1430BDW 適用於 6 應用s: Industrial Sensor Networks, Process Control Equipment, Building and HVAC Networks, Robotics and Factory Automation, Medical and Diagnostic Equipment, Telecommunications and Remote I/O.
Industrial Sensor Networks
The ISO1430BDW fits isolated sensor and controller links where remote equipment communicates over RS-485 or RS-422 in an electrically noisy environment. Its 12-Mbps maximum signaling rate provides more bandwidth than the 500-kbps ISO141x family, while 5-kVrms isolation separates the host electronics from ground shifts and fault energy on the field side. The manufacturer describes the bus pins as tolerant of IEC ESD and IEC EFT disturbances. Place the transceiver between the controller interface and the external bus, use the recommended isolation layout, and apply termination appropriate to the cable topology. Confirm exact supply voltages, logic levels, and ESD levels in the Texas Instruments datasheet before production release.
推薦
Process Control Equipment
For PLC-adjacent instrumentation, the ISO1430BDW provides a galvanically isolated half-duplex path between control electronics and an RS-485 or RS-422 field network. The 12-Mbps capability supports faster data exchange than lower-speed isolated transceivers, and the 5-kVrms isolation rating helps protect control hardware when field-side ground potentials differ. EMC-protected bus pins are valuable in cabinets containing relays, motors, and switching power stages. The design should follow the TI recommended application circuit, preserve separation around the isolation barrier, and include only the termination and protection required by the bus topology. Exact timing, supply, and thermal details remain subject to the manufacturer datasheet.
推薦
Building and HVAC Networks
ISO1430BDW can connect an embedded controller to an isolated building-management or HVAC bus using RS-485 or RS-422. Half-duplex operation suits a shared multidrop network, and the 12-Mbps rating provides substantial throughput for sensor polling and configuration traffic. Its isolation barrier helps separate mains-adjacent equipment from the communications electronics, while the integrated EMC protection targets industrial transient conditions. Designers should use twisted-pair cabling, observe the manufacturer termination and biasing recommendations, and keep the isolation barrier free of copper pours and high-current paths. The data rate, cable length, and transceiver loading must be checked together because the verified record does not specify all timing and termination details.
推薦
Robotics and Factory Automation
The ISO1430BDW is suitable for isolated communications between a robot controller and peripheral equipment exposed to motor noise, contactor switching, and long industrial cables. Its 12-Mbps capability reduces transfer time compared with the 500-kbps ISO141x group, which can help when a node exchanges frequent position or diagnostic data. The half-duplex RS-485/RS-422 interface and 5-kVrms isolation support robust field-bus connections. Maintain short differential routing, use a continuous reference plane, avoid stubs, and place termination only where required by the topology. Validate the complete signal-integrity path with the actual connector, cable, and baud-rate combination.
推薦
Medical and Diagnostic Equipment
ISO1430BDW can provide an isolated communications path in medical or diagnostic equipment that uses an RS-485 or RS-422 link between a host and an external subsystem. The 5-kVrms galvanic isolation helps reduce electrical coupling between host-side electronics and field-side wiring, while the 12-Mbps rate supports efficient data transfer. The manufacturer emphasizes harsh industrial EMC environments rather than specifically certifying this part for medical systems, so engineers must independently validate applicable medical, safety, and system-level isolation requirements. Use the datasheet's recommended barrier layout and confirm that the selected system architecture meets the required separation and leakage criteria.
推薦
Telecommunications and Remote I/O
The ISO1430BDW is appropriate for isolated remote I/O or telecommunications equipment that bridges a central controller to a field bus over RS-485 or RS-422. The 12-Mbps signaling rate supports higher-volume command and diagnostic traffic than the 500-kbps ISO141x family, and the half-duplex architecture supports cost-effective multidrop bus wiring. EMC protection on the bus pins is valuable in racks with switching supplies and long external cables. Place protection and termination components close to the connector, maintain differential pair symmetry, and preserve the isolation creepage and clearance specified by TI. Exact receive thresholds, propagation delay, and supply requirements must be confirmed from the manufacturer datasheet.
推薦
推薦產品摘要
工程參考資料，適用於 ISO1430BDW — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ISO1430DWR | ISO1410DWR |
|---|---|---|---|
| Package | 16-pin wide-body SOIC | 16-pin wide-body SOIC | 16-pin wide-body SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Signaling Rate | 12 Mbps | 12 Mbps | 500 kbps |
| Supported Standards | TIA/EIA RS-485 and RS-422 | TIA/EIA RS-485 and RS-422 | TIA/EIA RS-485 and RS-422 |
| Operating Mode | Half-duplex | Half-duplex | Half-duplex |
| Isolation Technology | Silicon-dioxide-based capacitive isolation | Silicon-dioxide-based capacitive isolation | Silicon-dioxide-based capacitive isolation |
| Channel Count | 1 transceiver | 1 transceiver | 1 transceiver |
| Quoted Unit Price as of 2026-10-30 | Quote required | Quote required | Quote required |
主要差異化特點
- Higher signaling rate within the ISO14xx family (對比ISO1410DWR)
- EMC-focused isolated bus interface (對比ISO1410DWR)
- Isolation and communication in one package (對比SN75174DWR)
設計說明
Maintain the isolation barrier copper keepout and creepage/clearance specified by Texas Instruments. Keep bus-side and logic-side return currents separate, avoid placing high-current paths beneath the isolation barrier, and do not connect the two ground domains except where the system architecture intentionally permits a defined connection. The device uses silicon-dioxide-based capacitive isolation, so the physical barrier layout is part of the isolation performance rather than only a mechanical constraint.
Route the RS-485 or RS-422 differential pair as a tightly coupled pair over a continuous reference plane, keep the pair length matched where practical, and avoid stubs and uncontrolled branch connections. At 12 Mbps, connector transitions, cable impedance, clock skew, and transceiver timing can materially affect eye closure. Validate the complete path with the actual cable and termination arrangement rather than relying only on nominal baud-rate calculations.
Do not treat ISO1410DWR as an unconditional substitute for ISO1430BDW merely because both use a 16-pin wide-body SOIC. The verified ISO14xx family information places ISO141x at up to 500 kbps and ISO143x at up to 12 Mbps. A 500-kbps device changes communication timing and may not satisfy the original system's throughput requirement. Confirm pin functions, supply levels, enable behavior, timing, and isolation parameters in the exact replacement datasheet.
Place transient-protection and bus-termination components close to the external connector, and use the manufacturer recommended application circuit for EMC protection. The bus pins are intended to withstand ESD and EFT events, but external connectors and cables can introduce events beyond the device's internal protections. Maintain short return paths and define a deliberate grounding and surge strategy for the installation to prevent external transients from bypassing the transceiver's protection network.
合規資訊
RoHS compliance is identified in the supplied manufacturer and comparison information. The provided verified data does not establish REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status. ISO1430 is an industrial interface device; AEC-Q100 is not indicated.
