KSZ8021RNL-TR - 10/100 Ethernet PHY | Microchip Technology
MPN: KSZ8021RNL-TR ✓ 啟用中KSZ8021RNL-TR 概覽
An Ethernet PHY is the physical-layer device in an Ethernet communications hierarchy. It converts logical data and framing signals from a network controller into electrical signaling suitable for twisted-pair cabling, while receiving and decoding incoming signaling. The reduced MII interface reduces the number of signals between the PHY and media access controller, simplifying connections to embedded processors, industrial controllers, and Ethernet switches while supporting 10 Mb/s and 100 Mb/s operation.
The device is identified as a one-port transceiver with full RMII support. Its listed operating voltage is 3.3 V, and its 24-pin QFN package includes an exposed pad for board-level thermal dissipation. The manufacturer datasheet also describes an interrupt output that eliminates the need for the processor to poll PHY status registers. These characteristics make the KSZ8021RNL-TR appropriate for compact embedded Ethernet equipment requiring a conventional copper-network physical layer.
The KSZ8021RNL-TR is a surface-mount PHY intended for 10BASE-T and 100BASE-TX networks. Its reduced MII connection supports communication with an RMII-compliant MAC, while the interrupt capability can reduce processor polling overhead when link, error, or status events require attention. The 4 mm by 4 mm QFN package supports space-constrained designs, but the exposed thermal pad must be connected according to the manufacturer land-pattern and thermal recommendations.
Typical uses include industrial automation equipment, embedded control systems, access-control terminals, test and measurement products, and compact network adapters. The 3.3 V supply and single-channel 10/100 capability are particularly suitable for equipment that does not require multi-gigabit Ethernet. In these systems, the PHY links a 3.3 V RMII-capable controller or processor to a 10/100 Ethernet network while providing status and interrupt handling.
PCB design should follow the manufacturer’s recommended component placement, exposed-pad land pattern, and decoupling arrangement. The exposed pad requires an uninterrupted ground connection and adequate thermal-via pattern for reliable heat transfer. Signal routing should also preserve the required separation between Ethernet magnetics and sensitive circuitry, while keeping the 50 MHz RMII reference-clock path short and well controlled.
This product record combines the manufacturer data for the KSZ8021RNL and KSZ8031RNL family with package information, sourcing guidance, and design-focused application analysis. It also identifies where detailed clock, register, electrical, and pin-assignment requirements must be confirmed in the manufacturer datasheet before a board is released for production.
直接替換替代品,適用於 KSZ8021RNL-TR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: KSZ8021RNL-TR (相同外形與佔位) — 差異在於 Host Interface, Package, Product Type, Supported Data Rates.
KSZ8031RNL-TR
✅ 直接替換聯絡詢價
查看資料表 →KSZ8021RNL-TR 規格
| Product Type | 10BASE-T/100BASE-TX Ethernet PHY transceiver |
| Number of Ports | 1 port |
| Supported Data Rates | 10 Mb/s and 100 Mb/s |
| Network Standard | 10BASE-T/100BASE-TX |
| Host Interface | Full RMII |
| RMII Reference Clock | 50 MHz for KSZ8021RNL |
| 供應電壓 | 3.3 V |
| 封裝 | 24-QFN with exposed pad, 4 mm x 4 mm |
| 安裝類型 | Surface mount |
| Interrupt Output | Yes |
| Status Register Polling | Not required when interrupt output is used |
| Ethernet Media Access | RMII-compliant media access controller connection |
KSZ8021RNL-TR 24-qfn with exposed pad, 4 mm x 4 mm 腳位配置指南
KSZ8021RNL-TR(24-qfn with exposed pad, 4 mm x 4 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: KSZ8021RNL-TR.
請參閱 資料表 以查看完整腳位配置。
典型應用
KSZ8021RNL-TR 適用於 6 應用s: Industrial Automation Controller, Embedded Network Access Terminal, Test and Measurement Instrument, Networked Security Camera, Building Access Control Panel, Compact Ethernet Communication Module.
Industrial Automation Controller
The KSZ8021RNL-TR is suitable for an industrial automation controller that connects a 3.3 V embedded processor to a 10/100 Ethernet network. Its one-port 10BASE-T and 100BASE-TX support covers conventional plant-network traffic, while full RMII provides a compact host connection. The 50 MHz RMII reference-clock arrangement must match the selected controller and clock-generation circuit. Its interrupt output can reduce the need for continuous PHY-register polling when link or status events occur. The 4 mm by 4 mm 24-QFN package also helps preserve board area in densely populated controller hardware, although the exposed pad requires a correctly designed ground and thermal-via pattern.
推薦
Embedded Network Access Terminal
The KSZ8021RNL-TR can add copper Ethernet connectivity to an embedded access terminal without requiring a separate physical transceiver. A 3.3 V host with an RMII-compatible controller can use the PHY for 10 Mb/s or 100 Mb/s operation, depending on the network and link requirements. The 50 MHz clock input is the principal integration constraint and must be reconciled with the controller’s RMII timing. Because the PHY includes an interrupt output, the host can be notified of supported events instead of continuously polling status registers. Its compact exposed-pad QFN outline supports terminal designs where connector placement and signal-integrity routing leave limited PCB area.
推薦
Test and Measurement Instrument
The KSZ8021RNL-TR is appropriate for test and measurement equipment that needs a compact 10/100 Ethernet management or data link. One port is sufficient for configuration access, remote control, or logging when the system does not require multiple simultaneous Ethernet links. Full RMII support minimizes host-side connections, while the interrupt output can support event-driven handling of PHY status. Designers should isolate the PHY clock from noisy analog or high-speed acquisition circuitry and use the manufacturer’s recommended exposed-pad grounding and Ethernet magnetics layout. The 3.3 V PHY supply can be integrated into a carefully partitioned low-voltage digital rail, with local decoupling placed as directed in the datasheet.
推薦
Networked Security Camera
The KSZ8021RNL-TR can serve as the 10/100 Ethernet physical layer in a security camera or video accessory that uses an RMII-capable baseband processor. The single-port PHY supports conventional 10BASE-T or 100BASE-TX links, while the interrupt output helps the processor respond to supported link-related events. The 24-QFN exposed-pad package is useful in compact camera electronics, but its thermal pad must be connected to a suitable ground plane. Ethernet magnetics, line-side protection, and the PHY should be arranged according to the manufacturer’s reference layout to reduce radiated emissions and susceptibility to nearby display, motor, or switching-power circuitry.
推薦
Building Access Control Panel
The KSZ8021RNL-TR is a practical fit for an access-control panel that must report events over a 10/100 Ethernet network. Its RMII interface enables a compact connection to a controller, and the interrupt output can signal supported PHY events rather than requiring continuous status polling. The 3.3 V operating supply aligns with common embedded logic rails, while the small 4 mm by 4 mm footprint simplifies placement near the Ethernet connector and magnetics. Because access-control equipment may be installed near switching supplies, relays, or long cable runs, maintain disciplined separation between line-side Ethernet routing and sensitive logic while following the manufacturer’s recommended power and exposed-pad layout.
推薦
Compact Ethernet Communication Module
The KSZ8021RNL-TR can be incorporated into a compact 10/100 Ethernet communication module intended to bridge an embedded controller to a copper network. The one-port transceiver and full RMII support reduce the number of host signals, making the design suitable for space-constrained control hardware. The KSZ8021RNL’s defined 50 MHz RMII reference-clock arrangement must be implemented carefully to minimize timing-margin loss between the clock source, PHY, and controller. Its interrupt output supports event-driven status handling. Mechanical design should reserve space for the 4 mm by 4 mm 24-QFN package, its exposed pad, magnetics, and isolation or surge-protection components required by the target installation environment.
推薦
推薦產品摘要
工程參考資料,適用於 KSZ8021RNL-TR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | KSZ8031RNL-TR |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 24-QFN exposed-pad (4 mm x 4 mm) | 24-QFN exposed-pad (4 mm x 4 mm) |
| Device Type | Single-port 10BASE-T/100BASE-TX Ethernet PHY | Single-port 10BASE-T/100BASE-TX Ethernet PHY |
| Supported Data Rates | 10 Mb/s and 100 Mb/s | 10 Mb/s and 100 Mb/s |
| Host Interface | Full RMII | Full RMII |
| Supply Voltage | 3.3 V | 3.3 V |
| Interrupt Output | Yes | Yes |
| Number of Ethernet Ports | 1 | 1 |
| Mounting Type | Surface mount | Surface mount |
主要差異化特點
- Defined 50 MHz RMII reference-clock configuration (對比KSZ8031RNL-TR)
- Compact 24-QFN exposed-pad implementation (對比KSZ8031RNL-TR)
- Event-driven status handling (對比KSZ8031RNL-TR)
設計說明
Use the manufacturer’s 24-QFN land pattern and exposed-pad layout rather than a generic 24-pin QFN footprint. Keep the exposed pad tied to the intended ground plane with the recommended via array so heat can leave the PHY. Place input, output, and decoupling components according to the reference design, and avoid routing unrelated high-current or switching signals beneath the exposed pad.
Route the 50 MHz RMII reference clock as a short, controlled-impedance path from its source, with minimal stubs and test access arranged to avoid additional loading. Check source amplitude, duty cycle, loading, and timing against the KSZ8021RNL datasheet. Poor clock integrity can reduce RMII timing margin even when the nominal 50 MHz frequency is correct.
Separate the PHY-side Ethernet traces and magnetics from clocks, sensors, analog inputs, and switching regulators. Follow the manufacturer’s recommended magnetics placement and keep copper and components that can disturb differential signals away from the line-side region. A controlled ground and return-current path beneath the digital interface is particularly important around the RMII clock and data lines.
Do not treat the KSZ8031RNL as an unconditional substitute for the KSZ8021RNL: the principal family difference is the RMII reference-clock arrangement. Review the host clock source, reset timing, strap settings, and pin descriptions in the shared datasheet. Also confirm that the -TR ordering code and exposed-pad layout match the assembled PCB before authorizing a replacement.
合規資訊
Compliance status is not stated in the available product records and must be confirmed from the manufacturer’s current product documentation before qualification.