Microchip Technology

KSZ8021RNL-TR - 10/100 Ethernet PHY | Microchip Technology

MPN: KSZ8021RNL-TR ✓ فعال
3.3 V Vdss 24-QFN with exposed pad, 4 mm x 4 mm Package 50 MHz for KSZ8021RNL Speed
حداقل سفارش: 1 |

KSZ8021RNL-TR نمای کلی

The Microchip Technology KSZ8021RNL-TR is a single-channel 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with a 3.3 V power supply, reduced MII support, and a 24-QFN exposed-pad package measuring 4 mm by 4 mm. It connects an RMII-compatible Ethernet media access controller to a 10/100 Ethernet network through the physical layer. The KSZ8021RNL-TR version accepts a 50 MHz RMII reference clock, while the related KSZ8031RNL operates with a different reference-clock arrangement.

An Ethernet PHY is the physical-layer device in an Ethernet communications hierarchy. It converts logical data and framing signals from a network controller into electrical signaling suitable for twisted-pair cabling, while receiving and decoding incoming signaling. The reduced MII interface reduces the number of signals between the PHY and media access controller, simplifying connections to embedded processors, industrial controllers, and Ethernet switches while supporting 10 Mb/s and 100 Mb/s operation.

The device is identified as a one-port transceiver with full RMII support. Its listed operating voltage is 3.3 V, and its 24-pin QFN package includes an exposed pad for board-level thermal dissipation. The manufacturer datasheet also describes an interrupt output that eliminates the need for the processor to poll PHY status registers. These characteristics make the KSZ8021RNL-TR appropriate for compact embedded Ethernet equipment requiring a conventional copper-network physical layer.

The KSZ8021RNL-TR is a surface-mount PHY intended for 10BASE-T and 100BASE-TX networks. Its reduced MII connection supports communication with an RMII-compliant MAC, while the interrupt capability can reduce processor polling overhead when link, error, or status events require attention. The 4 mm by 4 mm QFN package supports space-constrained designs, but the exposed thermal pad must be connected according to the manufacturer land-pattern and thermal recommendations.

Typical uses include industrial automation equipment, embedded control systems, access-control terminals, test and measurement products, and compact network adapters. The 3.3 V supply and single-channel 10/100 capability are particularly suitable for equipment that does not require multi-gigabit Ethernet. In these systems, the PHY links a 3.3 V RMII-capable controller or processor to a 10/100 Ethernet network while providing status and interrupt handling.

PCB design should follow the manufacturer’s recommended component placement, exposed-pad land pattern, and decoupling arrangement. The exposed pad requires an uninterrupted ground connection and adequate thermal-via pattern for reliable heat transfer. Signal routing should also preserve the required separation between Ethernet magnetics and sensitive circuitry, while keeping the 50 MHz RMII reference-clock path short and well controlled.

This product record combines the manufacturer data for the KSZ8021RNL and KSZ8031RNL family with package information, sourcing guidance, and design-focused application analysis. It also identifies where detailed clock, register, electrical, and pin-assignment requirements must be confirmed in the manufacturer datasheet before a board is released for production.

جایگزین‌های drop-in برای KSZ8021RNL-TR — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای KSZ8021RNL-TR (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Host Interface, Package, Product Type, Supported Data Rates.

Microchip Technology
Host Interface: RMII and MII
Package: 24-QFN, 4 mm × 4 mm
Product Type: 10/100 Ethernet PHY transceiver
مقایسه با KSZ8021RNL-TR →

KSZ8031RNL-TR

✅ جایگزین مستقیم
Microchip Technology
📦 24-QFN exposed-pad (4 mm x 4 mm)
10/100 Ethernet PHY transceiver · 10 Mbps and 100 Mbps · 10Base-T and 100Base-TX · RMII and MII · Single supply · 3.3 V · 3.135 V to 3.465 V · CAT-5 UTP

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

KSZ8021RNL-TR مشخصات

Product Type 10BASE-T/100BASE-TX Ethernet PHY transceiver
Number of Ports 1 port
Supported Data Rates 10 Mb/s and 100 Mb/s
Network Standard 10BASE-T/100BASE-TX
Host Interface Full RMII
RMII Reference Clock 50 MHz for KSZ8021RNL
ولتاژ تغذیه 3.3 V
بسته‌بندی 24-QFN with exposed pad, 4 mm x 4 mm
نوع نصب Surface mount
Interrupt Output Yes
Status Register Polling Not required when interrupt output is used
Ethernet Media Access RMII-compliant media access controller connection

راهنمای پیکربندی پین KSZ8021RNL-TR 24-qfn with exposed pad, 4 mm x 4 mm

پیکربندی پین برای KSZ8021RNL-TR (پکیج 24-qfn with exposed pad, 4 mm x 4 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 24-qfn with exposed pad, 4 mm x 4 mm برای KSZ8021RNL-TR

داده پین‌آوت تفصیلی موجود نیست برای KSZ8021RNL-TR.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

KSZ8021RNL-TR مناسب است برای 6 کاربردs: Industrial Automation Controller, Embedded Network Access Terminal, Test and Measurement Instrument, Networked Security Camera, Building Access Control Panel, Compact Ethernet Communication Module.

🏭

Industrial Automation Controller

The KSZ8021RNL-TR is suitable for an industrial automation controller that connects a 3.3 V embedded processor to a 10/100 Ethernet network. Its one-port 10BASE-T and 100BASE-TX support covers conventional plant-network traffic, while full RMII provides a compact host connection. The 50 MHz RMII reference-clock arrangement must match the selected controller and clock-generation circuit. Its interrupt output can reduce the need for continuous PHY-register polling when link or status events occur. The 4 mm by 4 mm 24-QFN package also helps preserve board area in densely populated controller hardware, although the exposed pad requires a correctly designed ground and thermal-via pattern.

🌐

Embedded Network Access Terminal

The KSZ8021RNL-TR can add copper Ethernet connectivity to an embedded access terminal without requiring a separate physical transceiver. A 3.3 V host with an RMII-compatible controller can use the PHY for 10 Mb/s or 100 Mb/s operation, depending on the network and link requirements. The 50 MHz clock input is the principal integration constraint and must be reconciled with the controller’s RMII timing. Because the PHY includes an interrupt output, the host can be notified of supported events instead of continuously polling status registers. Its compact exposed-pad QFN outline supports terminal designs where connector placement and signal-integrity routing leave limited PCB area.

🔧

Test and Measurement Instrument

The KSZ8021RNL-TR is appropriate for test and measurement equipment that needs a compact 10/100 Ethernet management or data link. One port is sufficient for configuration access, remote control, or logging when the system does not require multiple simultaneous Ethernet links. Full RMII support minimizes host-side connections, while the interrupt output can support event-driven handling of PHY status. Designers should isolate the PHY clock from noisy analog or high-speed acquisition circuitry and use the manufacturer’s recommended exposed-pad grounding and Ethernet magnetics layout. The 3.3 V PHY supply can be integrated into a carefully partitioned low-voltage digital rail, with local decoupling placed as directed in the datasheet.

🎥

Networked Security Camera

The KSZ8021RNL-TR can serve as the 10/100 Ethernet physical layer in a security camera or video accessory that uses an RMII-capable baseband processor. The single-port PHY supports conventional 10BASE-T or 100BASE-TX links, while the interrupt output helps the processor respond to supported link-related events. The 24-QFN exposed-pad package is useful in compact camera electronics, but its thermal pad must be connected to a suitable ground plane. Ethernet magnetics, line-side protection, and the PHY should be arranged according to the manufacturer’s reference layout to reduce radiated emissions and susceptibility to nearby display, motor, or switching-power circuitry.

🏠

Building Access Control Panel

The KSZ8021RNL-TR is a practical fit for an access-control panel that must report events over a 10/100 Ethernet network. Its RMII interface enables a compact connection to a controller, and the interrupt output can signal supported PHY events rather than requiring continuous status polling. The 3.3 V operating supply aligns with common embedded logic rails, while the small 4 mm by 4 mm footprint simplifies placement near the Ethernet connector and magnetics. Because access-control equipment may be installed near switching supplies, relays, or long cable runs, maintain disciplined separation between line-side Ethernet routing and sensitive logic while following the manufacturer’s recommended power and exposed-pad layout.

🧩

Compact Ethernet Communication Module

The KSZ8021RNL-TR can be incorporated into a compact 10/100 Ethernet communication module intended to bridge an embedded controller to a copper network. The one-port transceiver and full RMII support reduce the number of host signals, making the design suitable for space-constrained control hardware. The KSZ8021RNL’s defined 50 MHz RMII reference-clock arrangement must be implemented carefully to minimize timing-margin loss between the clock source, PHY, and controller. Its interrupt output supports event-driven status handling. Mechanical design should reserve space for the 4 mm by 4 mm 24-QFN package, its exposed pad, magnetics, and isolation or surge-protection components required by the target installation environment.

What is the KSZ8021RNL-TR?
The KSZ8021RNL-TR is a single-channel 10BASE-T/100BASE-TX Ethernet PHY transceiver with full RMII support, a 3.3 V supply, and a 24-QFN exposed-pad package. According to the Microchip Technology KSZ8021RNL/KSZ8031RNL datasheet, it provides the physical-layer interface between an RMII-compliant Ethernet controller and a 10/100 copper network.
What Ethernet speeds does the KSZ8021RNL-TR support?
The KSZ8021RNL-TR supports 10 Mb/s and 100 Mb/s Ethernet operation over 10BASE-T and 100BASE-TX. The Microchip Technology KSZ8021RNL/KSZ8031RNL datasheet identifies the device as a one-port physical-layer transceiver, making it suitable for embedded and industrial Ethernet systems that do not require gigabit data rates.
What clock does the KSZ8021RNL-TR require?
The KSZ8021RNL version requires a 50 MHz RMII reference clock. The manufacturer KSZ8021RNL/KSZ8031RNL datasheet specifically distinguishes the KSZ8021RNL as the version that accepts the 50 MHz reference clock. Confirm clock-source amplitude, timing, and topology against the datasheet before connecting it to an RMII controller.
Where can I download the KSZ8021RNL-TR datasheet PDF?
The official KSZ8021RNL/KSZ8031RNL datasheet PDF is available from Microchip Technology at the manufacturer URL recorded on this page. It covers the shared device family, including RMII behavior, register information, electrical characteristics, pin descriptions, and the difference between the KSZ8021RNL and KSZ8031RNL clock arrangements.
Where can I find the KSZ8021RNL-TR pinout?
The KSZ8021RNL-TR pin assignment is documented in the pin-description section of the official Microchip Technology KSZ8021RNL/KSZ8031RNL datasheet. The component uses a 24-QFN package with an exposed pad. Use the datasheet pin table when assigning PCB nets, and do not infer exposed-pad connectivity from a generic QFN drawing.
What package does the KSZ8021RNL-TR use?
The KSZ8021RNL-TR is supplied in a 24-QFN package measuring 4 mm by 4 mm and includes an exposed thermal pad. Distributor records describe the part as a 24-QFN-EP or 24-QFN package. The exposed pad must be connected and thermally managed according to the manufacturer land-pattern guidance.
Can the KSZ8021RNL-TR connect directly to an RMII Ethernet MAC?
Yes, the KSZ8021RNL-TR is designed for a reduced MII connection to an RMII-compliant Ethernet media access controller. Its full RMII support reduces the interface pin count compared with a parallel MII design. Supply voltage, clock, reset, interrupt, and signal-level requirements must still be checked against the specific controller interface.
Does the KSZ8021RNL-TR need interrupt polling?
The KSZ8021RNL-TR provides an interrupt output, so the processor does not need to continuously poll the PHY status registers for interrupt-supported events. According to the Microchip Technology KSZ8021RNL/KSZ8031RNL datasheet, the interrupt pin eliminates the polling function for the MAC. The application still needs an appropriate interrupt handler and status-register service routine.
What is the difference between KSZ8021RNL-TR and KSZ8031RNL-TR?
The principal documented distinction is the RMII reference-clock arrangement: the KSZ8021RNL accepts a 50 MHz RMII reference clock, while the KSZ8031RNL is the alternate clock-version member of the shared 24-QFN family. Both provide a one-port 10BASE-T/100BASE-TX PHY with RMII support. Verify the full clock and pin requirements before interchanging them.
What is the best drop-in replacement for KSZ8021RNL-TR?
The closest same-footprint family option identified is the KSZ8031RNL, which is documented in the same manufacturer 24-QFN family and differs primarily in its RMII reference-clock arrangement. A replacement is appropriate only when the system clock architecture is compatible. Request a controlled engineering review before substituting it for the 50 MHz-clock KSZ8021RNL.
Can KSZ8031RNL-TR replace KSZ8021RNL-TR?
The KSZ8031RNL may be considered for a board re-spin when its alternate RMII reference-clock arrangement matches the host design, but it is not an unconditional substitute for the 50 MHz-clock KSZ8021RNL. The shared manufacturer datasheet distinguishes the clock versions, so check the oscillator, reset sequence, pin requirements, and host timing before approving the change.
When should I choose the KSZ8021RNL-TR over the KSZ8031RNL?
Choose the KSZ8021RNL-TR when the Ethernet controller is designed around a 50 MHz RMII reference clock and the board is based on the KSZ8021RNL reference design. The KSZ8031RNL is more appropriate when the host interface uses the alternate clock configuration. The deciding factor is host-side clock compatibility, not merely the shared 24-QFN footprint.
Is the KSZ8021RNL-TR suitable for industrial automation equipment?
Yes, the KSZ8021RNL-TR fits compact 10/100 Ethernet links commonly used in industrial automation, monitoring, and control equipment. Its single-channel 10BASE-T/100BASE-TX support, full RMII interface, and interrupt output support a compact controller-to-network connection. Confirm the device’s operating-temperature and qualification requirements for the specific industrial environment.
Where can I buy KSZ8021RNL-TR and check its lead time?
Use the Request a Quote form on this page to ask about KSZ8021RNL-TR availability, lead time, minimum order quantity, and shipment quantity. Current commercial status should be confirmed through that form rather than inferred from a static listing. The target package and -TR ordering code should be stated in the request.
What is the price of KSZ8021RNL-TR?
The current unit price for KSZ8021RNL-TR should be requested through the Request a Quote form on this page. Commercial terms can depend on order quantity, package code, inventory, and supply status. Submit the required quantity and target shipping location so the quotation can reflect the exact KSZ8021RNL-TR ordering code.
Is KSZ8021RNL-TR in stock?
Current KSZ8021RNL-TR inventory should be confirmed through the Request a Quote form on this page. A listing that describes the component as available does not establish a firm stock allocation for a production order. Include your required quantity, date code preference, and approved manufacturer alternatives in the request.

داده‌های مرجع مهندسی برای KSZ8021RNL-TR — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the KSZ8021RNL-TR when the board uses a 3.3 V single-channel 10/100 Ethernet PHY, requires an RMII-compliant host controller, and is designed around a 50 MHz RMII reference clock. Its 24-QFN exposed-pad package is appropriate for compact embedded, industrial, test, access-control, and networking products. The KSZ8031RNL-TR is the closest identified drop-in family option when the host clock architecture matches its alternate RMII reference-clock arrangement. Because that clock distinction affects the host interface, validate the oscillator, timing, and pin configuration rather than substituting purely on package appearance. KSZ8081 and KSZ8091 migration materials describe pin differences, so they should not be treated as direct drop-ins without a board-specific review.

مقایسه با جایگزین‌ها

پارامتر این محصول KSZ8031RNL-TR
Brand Microchip Technology Microchip Technology
Package 24-QFN exposed-pad (4 mm x 4 mm) 24-QFN exposed-pad (4 mm x 4 mm)
Device Type Single-port 10BASE-T/100BASE-TX Ethernet PHY Single-port 10BASE-T/100BASE-TX Ethernet PHY
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
Host Interface Full RMII Full RMII
Supply Voltage 3.3 V 3.3 V
Interrupt Output Yes Yes
Number of Ethernet Ports 1 1
Mounting Type Surface mount Surface mount

تفاوت‌های کلیدی

  • Defined 50 MHz RMII reference-clock configuration (در مقابلKSZ8031RNL-TR)
  • Compact 24-QFN exposed-pad implementation (در مقابلKSZ8031RNL-TR)
  • Event-driven status handling (در مقابلKSZ8031RNL-TR)

یادداشت‌های طراحی

Use the manufacturer’s 24-QFN land pattern and exposed-pad layout rather than a generic 24-pin QFN footprint. Keep the exposed pad tied to the intended ground plane with the recommended via array so heat can leave the PHY. Place input, output, and decoupling components according to the reference design, and avoid routing unrelated high-current or switching signals beneath the exposed pad.

Route the 50 MHz RMII reference clock as a short, controlled-impedance path from its source, with minimal stubs and test access arranged to avoid additional loading. Check source amplitude, duty cycle, loading, and timing against the KSZ8021RNL datasheet. Poor clock integrity can reduce RMII timing margin even when the nominal 50 MHz frequency is correct.

Separate the PHY-side Ethernet traces and magnetics from clocks, sensors, analog inputs, and switching regulators. Follow the manufacturer’s recommended magnetics placement and keep copper and components that can disturb differential signals away from the line-side region. A controlled ground and return-current path beneath the digital interface is particularly important around the RMII clock and data lines.

Do not treat the KSZ8031RNL as an unconditional substitute for the KSZ8021RNL: the principal family difference is the RMII reference-clock arrangement. Review the host clock source, reset timing, strap settings, and pin descriptions in the shared datasheet. Also confirm that the -TR ordering code and exposed-pad layout match the assembled PCB before authorizing a replacement.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status is not stated in the available product records and must be confirmed from the manufacturer’s current product documentation before qualification.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

KSZ8021RNL-TR datasheet KSZ8021RNL-TR datasheet pdf KSZ8021RNL-TR pinout KSZ8021RNL-TR schematic KSZ8021RNL-TR equivalent KSZ8021RNL-TR replacement KSZ8021RNL-TR vs KSZ8031RNL-TR KSZ8021RNL-TR footprint KSZ8021RNL-TR application circuit KSZ8021RNL-TR price KSZ8021RNL-TR stock Microchip KSZ8021RNL-TR

قطعات و اصطلاحات مرتبط

Microchip Technology KSZ8021RNL-TR KSZ8021RNL KSZ8031RNL KSZ8081 KSZ8091 Ethernet PHY physical-layer transceiver 10BASE-T 100BASE-TX Reduced Media Independent Interface RMII Ethernet media access controller 3.3 V 50 MHz RMII reference clock 24-QFN QFN family surface-mount package exposed pad Ethernet controller industrial automation embedded Ethernet interrupt output 10 Mb/s 100 Mb/s
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ