LC4064V-75T48I - 64-Macro-Cell 168MHz CPLD | Lattice
MPN: LC4064V-75T48I ✗ 停產LC4064V-75T48I 概覽
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that sits between fixed-function logic and larger FPGAs. Its interconnected macrocells provide deterministic routing for control logic, interface adaptation, state machines, address decoding, and signal conditioning. The ispMACH 4000V family is designed for applications where a modest logic capacity, straightforward programming, and compact packaging are more important than the very high resource counts of an FPGA.
The LC4064V-75T48I provides 64 macrocells, a 168 MHz listed frequency, and a 3.3 V core supply. Its family supports 3.3 V, 2.5 V, and 1.8 V in-system programming environments, allowing the device to fit mixed-voltage systems with appropriate interface design. The -75 designation identifies the device speed grade, while the I suffix denotes the industrial-temperature ordering option used in this product family.
The 48-pin TQFP package offers a conventional surface-mount footprint with perimeter leads on a 0.5 mm pitch. Its relatively small pin count is useful when the design requires several I/O paths but does not need the larger pin budgets associated with higher-capacity PLDs. In-system programming helps simplify manufacturing, field updates, and prototype bring-up because the configuration interface can operate within the system rather than requiring a separate dedicated programmer.
Typical uses include industrial control, instrumentation, communication interfaces, legacy peripheral emulation, and embedded system glue logic. The 64-macro-cell device can consolidate several gate-level functions into one configurable component, reducing board area and avoiding the expense of implementing equivalent logic with numerous fixed gate arrays. It is particularly suitable for designs requiring modest interconnect complexity and repeatable, deterministic behavior.
Layout should preserve adequate decoupling at the supply pins, keep programming-interface routing away from fast or noisy analog-adjacent nets, and follow the manufacturer's pinout and recommended power-architecture guidance. Logic timing, output loading, and supply integrity must be checked against the actual clock and I/O requirements. The manufacturer datasheet remains the controlling reference for pin assignment, absolute maximum ratings, AC timing, and programming procedures.
This page combines the device's architecture and package information with practical replacement guidance, application context, and a parameter comparison for engineers evaluating the LC4064V-75T48I against same-package Lattice variants and pin-compatible CPLD options.
直接替換替代品,適用於 LC4064V-75T48I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064V-75T48I (相同外形與佔位) — 差異在於 Package, Device Type, Logic Family, RoHS Status, Speed Grade.
LC4064V-75TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-75T48C
✅ 直接替換聯絡詢價
查看資料表 →LC4064V-75TN48E
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZC-75T48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064B-75T48I
✅ 直接替換聯絡詢價
查看資料表 →XC2C64A-7QFG48I
✅ 直接替換聯絡詢價
查看資料表 →XC2C64A-5QFG48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-75T48I 最大額定值與電氣特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Device Family | ispMACH 4000V |
| Macrocell Count | 64 macrocells |
| System Frequency | 168 MHz |
| Speed Grade | -75 |
| Core Supply Voltage | 3.3 V |
| Supported In-System Programming Voltages | 3.3 V, 2.5 V, and 1.8 V |
| 封裝 | 48-pin TQFP |
| 腳位數 | 48 pins |
| 安裝類型 | Surface mount |
| Lead Pitch | 0.5 mm |
| Programming Method | In-system programmable |
| Programmable Logic Capacity | 64 macrocells |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| Datasheet Length | 74 pages |
LC4064V-75T48I 48-pin tqfp 腳位配置指南
LC4064V-75T48I(48-pin tqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064V-75T48I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064V-75T48I 適用於 6 應用s: Industrial Control and Sequencing, Legacy Peripheral Interface Control, Instrumentation and Test Equipment, Communication Interface Adaptation, Data Acquisition Control, Embedded System Glue Logic.
Industrial Control and Sequencing
The LC4064V-75T48I fits compact industrial sequencing and machine-control logic because its 64 macrocells can consolidate state machines, interlocks, command decoders, and timing functions while operating from a 3.3 V core supply. The device is used beside sensors, actuators, and a host microcontroller to translate machine commands into deterministic control outputs. Its listed 168 MHz system frequency provides ample timing margin for ordinary supervisory control loops, although motor-drive timing and safety functions should remain outside a general-purpose CPLD. Use the manufacturer datasheet to verify I/O slew rates, input thresholds, output-current limits, and the industrial temperature range for the selected ordering suffix.
推薦
Legacy Peripheral Interface Control
The LC4064V-75T48I is useful for legacy peripheral interface control because programmable logic can bridge incompatible bus timing without requiring a large FPGA. A design may use its 64 macrocells for address decoding, bus arbitration, chip-select generation, FIFO-like data steering, and interrupt coordination at a 3.3 V core supply. Its in-system programming capability simplifies prototype revision because configuration logic can be updated without replacing the device. Before committing to a replacement board, engineers should compare the target's 48-pin TQFP pinout with the specific alternative and verify configuration-file, level-shifter, pull-up, and clock requirements; similar logic capacity alone does not guarantee timing compatibility.
推薦
Instrumentation and Test Equipment
The LC4064V-75T48I can implement measurement sequencing, trigger logic, status encoding, and data-format conversion in instrumentation equipment. Its 64 macrocells are sufficient for coordinated control paths around an analog front end, while the listed 168 MHz performance supports demanding digital timing. The 48-pin TQFP package also keeps the programmable section compact on a densely populated instrument board. For a precision measurement design, separate analog and digital return paths, place supply decoupling near the device, and treat the CPLD as a timing controller rather than a substitute for high-performance analog conversion. Use the manufacturer timing tables to establish setup and hold margins for every external clock and control signal.
推薦
Communication Interface Adaptation
The LC4064V-75T48I is suitable for communication-interface adaptation when a system needs programmable level sequencing, command framing, status monitoring, or conversion between legacy and modern signal formats. With 64 macrocells and a 3.3 V core supply, it can operate as a deterministic companion to a host processor or interface controller. Its in-system programming supports protocol updates during development and maintenance. Designers should calculate the external-interface timing budget, include series damping where signal edges are fast, and confirm that every transceiver interface has the correct voltage tolerance. The listed 168 MHz frequency does not by itself guarantee compliance with a communications protocol; protocol timing, skew, jitter, and impedance requirements must be validated independently.
推薦
Data Acquisition Control
The LC4064V-75T48I can coordinate data-acquisition systems by generating sample-control signals, multiplexing enables, channel tags, and interface handshakes. Its 64 macrocells provide a practical capacity for several related state machines, and its listed 168 MHz frequency is well suited to deterministic sequencing around moderate-speed converters. The 48-pin TQFP footprint helps preserve board area, while 3.3 V operation supports integration with modern digital subsystems. For accurate acquisition, keep the CPLD clock and control traces away from sensitive analog inputs, use matched clock routing where sampling accuracy matters, and validate output timing against each converter's acquisition window. Verify I/O voltage limits because the core supply and individual bank voltages are not necessarily interchangeable.
推薦
Embedded System Glue Logic
The LC4064V-75T48I is appropriate for embedded-system glue logic that connects processors, memories, sensors, and discrete peripherals. Typical tasks include reset sequencing, interrupt routing, bus decode, watchdog coordination, and programmable I/O standard management. Its 64 macrocells and listed 168 MHz performance provide more capability than a small PAL while retaining deterministic CPLD behavior and in-system programmability. In a compact embedded board, the 48-pin TQFP package offers a practical balance of logic capacity and routing access. Before layout approval, compare pin assignments with the exact alternate device, confirm power-up and configuration behavior, and reserve programming access for field updates. Critical safety functions require independent verification and should not rely solely on an unqualified programmable device.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064V-75T48I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064V-75TN48I | LC4064V-75T48C | LC4064V-75TN48E | LC4064ZC-75T48I | LC4064B-75T48I | ||
|---|---|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | ||
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin QFG/TQFP family | 48-pin QFG/TQFP family |
| Speed Designator | -75 | -75 | -75 | -75 | -75 | -75 | -7 | -5 |
| Ordering Suffix | I | NI | C | NE | I | I | I | I |
主要差異化特點
- Same-package ispMACH 4000V family option with matching speed grade (對比LC4064V-75TN48I)
- Maintains the 48-pin TQFP architecture while offering a commercial ordering condition (對比LC4064V-75T48C)
- Cross-brand 64-cell comparison path (對比XC2C64A-7QFG48I)
- In-system programming across multiple voltage environments (對比XC2C64A-5QFG48I)
設計說明
Assign the PCB footprint only after matching the exact TQFP lead dimensions, 0.5 mm pitch, pin-1 orientation, and courtyard of the ordered device. Although the related QFG48 alternatives are 48-pin parts, package-body and lead geometry can differ enough to affect solderability or land-pattern clearance. Review the manufacturer package drawing and compare every pad with the assembled PCB footprint before release.
Provide local supply decoupling and route power and ground connections according to the manufacturer layout instructions. The device is listed for a 3.3 V core supply, but I/O banks may impose separate voltage constraints. Do not assume that the 3.3 V, 2.5 V, and 1.8 V in-system programming options describe every operating I/O bank. Confirm the power-up sequence, supply tolerance, configuration state, and per-bank voltage limits in the manufacturer datasheet.
Maintain continuous clock routing, use a ground reference adjacent to high-speed outputs, and avoid stubs on configuration or clock nets. A listed 168 MHz system frequency does not guarantee that every I/O path can operate at that rate because routing, loading, output standards, and timing mode affect the result. Use the datasheet timing tables to establish setup, hold, skew, and output-delay margins for the actual board topology.
Do not treat a similar 48-pin CPLD as automatically interchangeable. For every alternative, check the pin table, configuration interface, supply pins, I/O voltage tolerance, clock pins, programming voltages, speed grade, and bitstream conversion requirements. Preserve access to the configuration pins so the board can be programmed after assembly, and validate a cross-brand XC2C64A candidate on hardware before production release.
合規資訊
The manufacturer datasheet is available, but an explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was not identified for the exact ordering code. AEC-Q100 is not applicable to this general-purpose programmable-logic device.