LC4384B-5F256I - 5ns 384-Macrocell CPLD | Lattice Semiconductor
MPN: LC4384B-5F256I ✗ 停產LC4384B-5F256I 概覽
A CPLD, or complex programmable logic device, is a programmable semiconductor that sits between fixed-function logic and FPGA complexity. Its architecture provides a comparatively predictable timing model and nonvolatile configuration retention, making it useful for control logic that must operate reliably after power-up without external configuration loading. The ispMACH 4000 family combines the architectural characteristics of the ispLSI 2000 and ispMACH 4A families for high-density programmable logic designs.
The LC4384B-5F256I is identified by the “-5” speed grade, 384 macrocells, a 256-ball FBGA package, and an industrial temperature designation. Its SuperFAST positioning supports designs with demanding timing margins, while in-system programmability allows configuration or field updates through the device programming interface. This combination is particularly useful where a design must consolidate multiple fixed-function devices into one programmable logic package.
The 256-ball FBGA provides a high pin count for external logic connections and supports dense mixed-signal board layouts. Because BGA routing is sensitive to escape-trace geometry, power delivery, and programming access, the package should be treated as a controlled-layout component. Designers should follow the pin-assignment and reference-design guidance in the manufacturer datasheet rather than infer ball locations from a generic BGA drawing.
Typical uses for the LC4384B-5F256I include industrial control systems, communication interface logic, peripheral bridges, test and measurement equipment, data-acquisition control, and embedded system glue logic. It can consolidate address decoding, state-machine control, data capture sequencing, level adaptation, and communication-interface functions while preserving a programmable upgrade path.
The principal design trade-off is fixed logic capacity and a 5 ns speed grade: the device excels at deterministic, compact logic integration, but it is not interchangeable with a soft FPGA design requiring large register arrays, block RAM, high-speed serial transceivers, or extensive DSP resources. Validate every timing constraint, configuration mode, I/O standard, and pin assignment in the Lattice design tool before fabrication.
This product page consolidates lifecycle status, family positioning, package information, qualified same-package alternatives, comparison parameters, and practical design guidance. It supports faster component identification while keeping the final engineering decisions tied to the manufacturer datasheet and design-tool validation.
直接替換替代品,適用於 LC4384B-5F256I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LC4384B-5FN256I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4384B-10F256I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4384B-75F256I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4384B-75FT256C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4384C-5F256I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4384B-5F256I 最大額定值與電氣特性
| Device Type | SuperFAST high-density in-system-programmable PLD |
| Device Family | ispMACH 4000B |
| Architecture | CPLD |
| Programmable Logic | 384 macrocells |
| Speed Grade | 5 ns |
| Supply Voltage Options | 3.3 V, 2.5 V, or 1.8 V |
| Programmability | In-system programmable |
| 封裝 | 256-ball FBGA |
| Package Family | FBGA surface-mount package |
| Temperature Grade | Industrial |
| Manufacturer | Lattice Semiconductor |
| 生命週期狀態 | Discontinued |
LC4384B-5F256I fbga surface-mount package 腳位配置指南
LC4384B-5F256I(fbga surface-mount package 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4384B-5F256I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4384B-5F256I 適用於 6 應用s: Industrial Control Logic, Data-Acquisition Control, Communication Interface Consolidation, Test and Measurement Equipment, Embedded System Glue Logic, Programmable Signal Conditioning.
Industrial Control Logic
The LC4384B-5F256I fits industrial controllers that require substantial programmable logic for sequencing, state-machine control, fault handling, and peripheral arbitration. Its 384 macrocells allow multiple fixed-function blocks to be consolidated, while the 5 ns speed grade provides more timing margin than the 7.5 ns and 10 ns family alternatives. The device can operate from the family’s identified 3.3 V, 2.5 V, or 1.8 V options, subject to the exact bank and I/O requirements. Designers should partition the logic into clocked domains, constrain every I/O path, and reserve independent programming access for production programming or field updates.
推薦
Data-Acquisition Control
The LC4384B-5F256I can coordinate data-acquisition systems by implementing channel sequencing, timing gates, command decoding, buffer control, and acquisition-state logic around external converters. The 384-macrocell capacity is suitable for multiple parallel channels, while the 5 ns grade helps preserve short setup and hold margins in synchronous control paths. In-system programmability permits revision-specific acquisition sequences to be updated without changing the PCB. The implementation should define clock domains carefully, use registered outputs for high-speed interfaces, and verify converter settling times rather than assuming the CPLD timing specification covers external analog acquisition delays.
推薦
Communication Interface Consolidation
The LC4384B-5F256I is appropriate for legacy communication-interface consolidation where parallel data must be converted, framed, multiplexed, or routed among multiple peripherals. Its 384 macrocells can host protocol state machines, FIFO-like register logic, interrupt control, and bus arbitration, while the 5 ns grade provides additional timing margin for registered interface paths. Compared with the LC4384B-10F256I, the selected grade reduces nominal timing values by 50%, which can simplify timing closure at the logic level. Boundary behavior still depends on external driver and receiver delays, so the CPLD timing report must be supplemented with board-level interface analysis.
推薦
Test and Measurement Equipment
The LC4384B-5F256I suits test and measurement instruments that require deterministic sequencing, command parsing, timing control, and dense peripheral interfacing. The device can consolidate self-test logic, instrument-state management, trigger distribution, front-panel decoding, and data-routing functions in one programmable package. Its 5 ns grade gives more margin than the 7.5 ns LC4384B-75F256I, which is valuable when control paths interact with external counters, drivers, or converters. For high-accuracy measurement channels, separate analog timing from digital control and validate propagation delay through cables, connectors, and external instrumentation before setting acquisition timing.
推薦
Embedded System Glue Logic
The LC4384B-5F256I can implement programmable glue logic around a processor, MCU, or FPGA by handling address decode, interrupt arbitration, watchdog handling, peripheral selection, and hardware state sequencing. At 384 macrocells, it provides substantially more logic capacity than a small discrete-programmable device without requiring the memory and hard-processing resources of a larger FPGA. The 5 ns grade is useful when glue logic connects to registered buses or memory-style interfaces. Designers should avoid treating the CPLD as transparent combinational logic, register all asynchronous inputs, and define reset ownership so that processor, CPLD, and external peripherals start in a known state.
推薦
Programmable Signal Conditioning
The LC4384B-5F256I can implement programmable signal conditioning for control panels and sensor interfaces through state-dependent routing, pulse shaping, event qualification, and digital filtering. The 384-macrocell density allows multiple channels to share a single programmable device, while the 5 ns grade supports registered logic operating near high-speed peripherals. In-system programmability makes it useful when filtering coefficients, routing tables, or operating modes must be revised by configuration rather than a PCB change. Analog filtering and level translation should still use dedicated components, and every signal crossing between voltage domains must be checked for tolerances, slew rate, and electrostatic-protection requirements.
推薦
推薦產品摘要
工程參考資料,適用於 LC4384B-5F256I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4384B-5FN256I | LC4384B-10F256I | LC4384B-75F256I | LC4384B-75FT256C | LC4384C-5F256I |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 256-ball FBGA | 256-ball FBGA | 256-ball FBGA | 256-ball FBGA | 256-ball FBGA | 256-ball FBGA |
| Speed Grade | 5 ns | 5 ns | 10 ns | 7.5 ns | 7.5 ns | 5 ns |
| Device Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000 | ispMACH 4000 | ispMACH 4000 | ispMACH 4000C |
| Programmable Logic | 384 macrocells | 384 macrocells | 384 macrocells | 384 macrocells | 384 macrocells | 384 macrocells |
主要差異化特點
- Faster nominal speed grade within the same 256-FBGA family (對比LC4384B-10F256I)
- More timing margin than the 7.5 ns grade (對比LC4384B-75F256I)
- Closer speed-grade alignment with the alternative family (對比LC4384C-5F256I)
- Exact grade preservation for a close replacement (對比LC4384B-5FN256I)
設計說明
Treat the 256-ball FBGA as a high-density escape-routing problem. Follow the manufacturer package and reference-design recommendations for ball assignment, via-in-pad or via adjacent to the ball field, power-plane geometry, and decoupling placement. Program, clock, reset, and configuration pins should be routed to accessible test points so production programming and board diagnosis remain possible without redesigning the package escape pattern.
Plan a complete multi-supply decoupling network around the 3.3 V, 2.5 V, and 1.8 V options identified for this device family. Verify which voltage banks are used by the selected design, connect every required supply pin, and separate sensitive reference or internal-supply routing from switching nodes. Use the datasheet capacitor values and placement guidance rather than relying on generic bulk capacitance, because improper return paths can undermine CPLD timing and configuration reliability.
Do not assume that a shared 256-FBGA footprint makes every LC4384 family option electrically interchangeable. Verify the ordering table, speed grade, temperature suffix, I/O standards, dedicated pins, configuration method, and ball assignments for every proposed substitute. In particular, changing from a 5 ns grade to 7.5 ns or 10 ns can invalidate an existing timing closure even when the package remains unchanged.
Define clock ownership and reset strategy before assigning logic. Use a single low-skew clock source with known jitter, synchronize asynchronous inputs, and register outputs where interface timing depends on a CPLD boundary. Run static timing analysis for every clock domain, then add external setup, hold, propagation, and skew margins for connected processors, memories, converters, and transceivers.
合規資訊
The product is identified as industrial-grade and discontinued, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact MPN.