Texas Instruments

LM2902KNSE4 - Quad 26V 1.2MHz Op-Amp | Texas Instruments

MPN: LM2902KNSE4 ✓ 啟用中
3 V to 26 V Vdss 0.8 mA Id 14-SOIC (0.209 in, 5.30 mm width) Package
MOQ: 1 |

LM2902KNSE4 概覽

The Texas Instruments LM2902KNSE4 is a quad general-purpose operational amplifier with four independent high-gain, internally frequency-compensated amplifier circuits in a 14-pin SOIC (5.30 mm width) surface-mount package. Each amplifier offers a 1.2 MHz gain-bandwidth product, a 0.5 V/us slew rate, and operation from a single supply up to 26 V (or dual supplies of +/-13 V), with a typical supply-current drain of 0.8 mA that is largely independent of supply voltage.

A quad operational amplifier is an analog IC that integrates four op-amp cores on a single die, sharing supply and ground pins while keeping each amplifier's inputs and outputs independent. Op-amps belong to the linear-amplifier family of semiconductors, positioned under the broader categories of amplifiers, analog signal conditioning ICs, and power management signal chains. Quad integration reduces board area, bill-of-material count, and per-channel cost compared with four single op-amps.

Key features of the LM2902KNSE4 include a wide single-supply range (3 V to 26 V), common-mode input range that extends to ground (ground-sensing capability), and the automotive temperature grade associated with the LM2902 family. The improved LM2902K variant adds a 2 kV ESD rating per TI product information. Outputs can source and sink current without external protection in most configurations, and the internal compensation removes the need for external frequency-setting components.

Architecturally, the LM2902 follows the classic bipolar silicon process used in industry-standard quad op-amps. The internal 1.2 MHz compensation makes each channel unity-gain stable, while the low, supply-independent quiescent drain supports battery-powered and low-power industrial designs. The biasing scheme keeps channel-to-channel coupling low, so one amplifier driving a load does not materially disturb the others.

Typical applications include automotive signal conditioning (sensor buffers and comparators on 12 V/24 V rails), industrial control loops and 4-20 mA transmitters, active filters and summing stages in audio and instrumentation, and low-side current-sense amplification in power supplies. The automotive grade and wide supply range make it well suited to vehicle-level electronics where cold-crank and load-dump conditions compress supply headroom.

When designing with this device, keep the common-mode input range within the datasheet limits - inputs beyond the negative rail can cause phase inversion, and outputs cannot swing fully to the positive rail under load. Decouple the shared supply pin with 0.1 uF placed close to pin 4.

This page adds value beyond the manufacturer datasheet: distributor sourcing links, drop-in alternative comparisons with parametric matching, per-application design guidance, and layout notes compiled from TI application literature.

直接替換替代品,適用於 LM2902KNSE4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2902KNSE4 (相同外形與佔位) — 差異在於 Slew Rate, Package, Packaging, Gain Bandwidth Product, Number of Amplifier Circuits.

Texas Instruments
Slew Rate: 0.5 V/µs
Package: 14-SOIC, 3.90 mm width
Number of Amplifier Circuits: 4
比較對象 LM2902KNSE4 →
Texas Instruments
Package: 14-SOIC
比較對象 LM2902KNSE4 →
onsemi
Slew Rate: 0.6 V/µs
Packaging: Tape & Reel (R2G suffix)
Gain Bandwidth Product: 1 MHz
比較對象 LM2902KNSE4 →
Texas Instruments
Package: 14-pin SOIC
Number of Amplifier Circuits: 4 circuits
比較對象 LM2902KNSE4 →

LM2902DR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 14-SOIC (5.30 mm width)
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

聯絡詢價

查看資料表 →

LM2902DG4

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 14-SOIC (5.30 mm width)
General Purpose · 4 · Quad · 26 V · ±13 V · ±1.5 V to ±13 V · 1.2 MHz · 0.5 V/µs

聯絡詢價

查看資料表 →

LM2902DE4

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-SOIC (5.30 mm width)
standard automotive-grade LM2902 in SOIC-14; identical electricals, no improved 2 kV ESD die

📋 參考替代品(不在目錄中)

LM324ADR2G

✅ 直接替換 ⚠️ 規格未經驗證
onsemi
📦 14-SOIC (5.30 mm width)
General Purpose · 4 · 3 V to 32 V · ±1.5 V to ±16 V · 1 MHz · 0.6 V/µs · 3 mV

聯絡詢價

查看資料表 →

LM324ADRG4

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 14-SOIC (5.30 mm width)
Quadruple operational amplifier · 4 circuits · 1.2 MHz · 0.5 V/us · ±1.5 V · ±16 V · 0.8 mA · Includes ground

聯絡詢價

查看資料表 →

LM2902KNSE4 最大額定值與電氣特性

Amplifier Type General Purpose
Number of Circuits 4
Gain Bandwidth Product 1.2 MHz
Slew Rate 0.5 V/us
Supply Voltage Range (Single) 3 V to 26 V
Supply Voltage Range (Dual) +/-13 V
Quiescent Current (Per Amplifier, Typ) 0.8 mA
ESD Rating 2 kV (improved LM2902K)
Temperature Grade Automotive
封裝 / 外殼 14-SOIC (0.209 in, 5.30 mm width)
安裝類型 Surface Mount
Terminal Form Gull Wing
Packaging Tube
Number of Terminals 14

LM2902KNSE4 腳位配置

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
腳位 1 OUT1 — Output of amplifier 1
腳位 2 IN1- — Inverting input of amplifier 1
腳位 3 IN1+ — Non-inverting input of amplifier 1
腳位 4 VCC — Positive supply
腳位 5 IN2+ — Non-inverting input of amplifier 2
腳位 6 IN2- — Inverting input of amplifier 2
腳位 7 OUT2 — Output of amplifier 2
腳位 8 OUT3 — Output of amplifier 3
腳位 9 IN3- — Inverting input of amplifier 3
腳位 10 IN3+ — Non-inverting input of amplifier 3
腳位 11 VEE/GND — Negative supply or ground
腳位 12 IN4+ — Non-inverting input of amplifier 4
腳位 13 IN4- — Inverting input of amplifier 4
腳位 14 OUT4 — Output of amplifier 4

典型應用

LM2902KNSE4 適用於 6 應用s: Automotive Sensor Signal Conditioning, Industrial Current Sensing and Transmitters, Active Filters and Signal Conditioning, Power Supply Monitoring and Control, Battery-Powered Portable Instrumentation, Motor Drive and Position Feedback Electronics.

🚗

Automotive Sensor Signal Conditioning

The LM2902KNSE4 fits automotive sensor buffering because it combines an automotive temperature grade, a 26 V single-supply rating, and a common-mode input range that extends to ground, allowing direct interface with ground-referenced resistive sensors such as throttle position, coolant level, and pressure bridges. Each of the four channels can buffer a separate sensor, cutting component count on body-control and powertrain boards. Placed close to the sensor connector with 0.1 uF decoupling at pin 4, the 1.2 MHz channels provide stable unity-gain buffering without oscillation. Because the output cannot swing to the positive rail, design the ADC scale so full-scale signals stay below VCC minus roughly 1.5 V under load.

🏭

Industrial Current Sensing and Transmitters

In 4-20 mA loop transmitters and low-side current-sense circuits, the LM2902KNSE4 provides the gain stages and output driver on 24 V industrial rails. Its supply range up to 26 V covers standard industrial power without an additional regulator stage, and the ground-sensing input range simplifies shunt measurement near 0 V. A typical topology uses one channel to amplify the shunt voltage by 50x to 100x, a second as an integrator driving the pass transistor, and the remaining two for range scaling. The 0.8 mA-per-channel quiescent drain keeps loop overhead low, and the 0.5 V/us slew rate is ample for the slow control loops of process transmitters.

🔧

Active Filters and Signal Conditioning

The four matched channels of the LM2902KNSE4 make it economical for multi-stage active filters - Sallen-Key low-pass, multiple-feedback band-pass, and anti-aliasing stages - on a single SOIC-14 footprint. Internal compensation makes each channel unity-gain stable, so Sallen-Key sections with unity-gain buffers work directly, and the 1.2 MHz gain-bandwidth product supports corner frequencies up to roughly 10 kHz at Q values above 1 with modest gain error. In audio and instrumentation front ends, the ground-inclusive common-mode range allows single-supply AC-coupled topologies biased at mid-supply from a divider buffered by a spare channel. Keep closed-loop gains moderate to preserve phase margin near the bandwidth limit.

⚡

Power Supply Monitoring and Control

The LM2902KNSE4 serves as the error amplifier and supervision channel in off-line and DC-DC power supplies. One channel acts as the voltage-loop error amplifier comparing a divided output against a reference, while a second implements overvoltage or overcurrent latching via a comparator-style connection; the 26 V rating tolerates bias from 12 V and 24 V auxiliaries directly. Because the amplifier output is designed to interface with optocoupler LEDs in isolated supplies, the classic TL431-plus-op-amp secondary loop is straightforward. Add a 0.1 uF decoupling capacitor at pin 4 and keep the compensation network traces short; the ground-reaching input range permits shunt-based current-limit sensing near the primary return.

📱

Battery-Powered Portable Instrumentation

With a typical quiescent drain of 0.8 mA per channel that is largely independent of supply voltage, the LM2902KNSE4 suits battery instruments operating from 3 V to 24 V packs, including 3-cell lithium-ion stacks and 12 V lead-acid batteries. Four channels on one die reduce board area and standby bias compared with discrete singles, supporting portable data loggers, handheld meters, and wireless sensor nodes. The internal compensation removes startup stability concerns when supplies ramp slowly from a soft-switch. Design the signal range so outputs stay above a few hundred millivolts of either rail, since the class-B output stage does not swing rail-to-rail under load, and buffer high-impedance dividers with a spare channel.

⚙️

Motor Drive and Position Feedback Electronics

In DC and stepper motor drive electronics, the LM2902KNSE4 implements current-limit amplifiers, tachometer signal conditioning, and PWM ramp generation on a single quad die. Its 26 V single-supply rating connects directly to 12 V and 24 V drive rails, and one channel can difference-sense the motor shunt with inputs near ground. The 0.5 V/us slew rate and 1.2 MHz bandwidth are sufficient for generating sawtooth PWM carriers up to the tens-of-kHz range typical of small drives. Keep the current-sense filter bandwidth well below the amplifier's limit to avoid amplifying switching spikes, and use the remaining channels for reference buffering and fault-level comparison to reduce bill-of-material count.

推薦產品摘要

TL431AIDBZR Texas Instruments 用於: Automotive Sensor Signal Conditioning, Active Filters and Signal Conditioning, Power Supply Monitoring and Control LM2903DR Texas Instruments 用於: Automotive Sensor Signal Conditioning, Motor Drive and Position Feedback Electronics TL431AIDR Loop reference regulation 用於: Industrial Current Sensing and Transmitters TIP122TU Loop driver pass transistor 用於: Industrial Current Sensing and Transmitters LM2902DR Texas Instruments 用於: Active Filters and Signal Conditioning, Battery-Powered Portable Instrumentation PC817X2NSZ9F Optocoupler for isolated feedback 用於: Power Supply Monitoring and Control TLV70233DBVR Low-IQ LDO for clean analog rail 用於: Battery-Powered Portable Instrumentation L6203 DMOS full-bridge driver 用於: Motor Drive and Position Feedback Electronics
What is the supply voltage range of LM2902KNSE4?
The LM2902KNSE4 operates from a single supply of up to 26 V or from dual supplies of +/-13 V, according to the Texas Instruments LM2902K product page. A typical quiescent drain of 0.8 mA per amplifier is largely independent of supply voltage, which keeps power consumption predictable across 5 V, 12 V, and 24 V automotive and industrial rails. Consult the manufacturer datasheet for the absolute maximum ratings before applying transients above 26 V.
What is the gain bandwidth product of the LM2902KNSE4?
The gain bandwidth product of the LM2902KNSE4 is 1.2 MHz per amplifier channel. Each of the four internally compensated channels is unity-gain stable, so no external frequency-compensation components are required. For closed-loop gains such as 10x (20 dB), expect a usable bandwidth of roughly 120 kHz, since bandwidth scales inversely with closed-loop gain. The companion slew rate is 0.5 V/us, which limits full-power bandwidth at larger output swings.
What is the difference between LM2902KNSE4 and LM2902DG?
Both are Texas Instruments quad general-purpose op-amps in 14-pin SOIC packages with identical pinout, 1.2 MHz gain bandwidth, and 0.5 V/us slew rate. The LM2902KNSE4 belongs to the improved LM2902K family, which adds a 2 kV ESD rating and automotive temperature grade, while the LM2902DG is the standard-grade version. Functionally they are drop-in interchangeable on the same footprint; choose the KNSE4 for automotive or harsher ESD environments and the standard part for cost-sensitive commercial designs.
Can LM324 replace LM2902KNSE4?
Yes, the Texas Instruments LM324 in the same 14-SOIC package is pin-to-pin compatible with the LM2902KNSE4 and offers the same 1.2 MHz gain-bandwidth and 0.5 V/us slew rate. The main differences are the operating temperature range and ESD robustness: the LM2902 family is graded for automotive temperature extremes and the LM2902K adds a 2 kV ESD rating, whereas standard LM324 commercial parts are rated for a narrower range. Verify the required temperature range for your application before substituting.
When should I choose LM2902KNSE4 over a rail-to-rail op-amp?
Choose the LM2902KNSE4 when you need a low-cost, robust, automotive-grade quad amplifier on a 5 V to 26 V single supply and your signals stay within the input common-mode range, which includes ground. The LM2902 output cannot reach the positive rail under load, so if your application needs output swing within a few hundred millivolts of VCC, or rail-to-rail input beyond the negative rail, select a rail-to-rail amplifier instead. For ground-referenced sensing, filtering, and buffering tasks, the LM2902KNSE4 remains the economical standard.
What is the best drop-in replacement for LM2902KNSE4?
The best drop-in replacements are other Texas Instruments quad op-amps in the same 14-SOIC package with identical pinout: LM2902DR, LM2902DG4, and LM2902DE4 are direct family members with the same 1.2 MHz bandwidth, while LM324ADR is pin-compatible where only commercial temperature range is required. All of these install on the same PCB footprint without layout changes. Confirm package suffix and temperature grade on each order, and review the comparison table on this page for parameter-by-parameter differences.
Where can I download the LM2902KNSE4 datasheet PDF?
The manufacturer datasheet for the LM2902KNSE4 is available from the Texas Instruments product page at ti.com, which hosts the LM2902K family documentation covering specifications, absolute maximum ratings, typical application circuits, and package drawings. Datasheet PDFs are also linked from the distributor product page for this exact part number. Always use the latest revision from the manufacturer rather than third-party copies, since family application notes and ESD ratings are periodically updated by TI.
Where can I find the LM2902KNSE4 pinout?
The LM2902KNSE4 uses the standard 14-pin quad op-amp pinout found on industry-standard devices such as the LM324: pins 1, 7, 8, and 14 are the four outputs; pins 2, 6, 9, and 13 are inverting inputs; pins 3, 5, 10, and 12 are non-inverting inputs; pin 4 is the positive supply (VCC) and pin 11 is the negative supply or ground (VEE). Use the pin diagram on this page and the pin-description table in the Texas Instruments datasheet when routing your PCB.
Is the LM2902KNSE4 suitable for automotive applications?
Yes, the LM2902KNSE4 is an automotive temperature grade device from the LM2902 family, and the improved LM2902K version provides a 2 kV ESD rating per the TI product information. It operates up to 26 V single-supply, which covers 12 V and 24 V vehicle rails under normal conditions. For designs that must survive load-dump transients, add upstream protection such as a series resistor and clamp, because the absolute maximum supply rating still applies. Typical automotive uses include sensor buffering and comparator functions on body-control and powertrain modules.
What are the key specifications of LM2902KNSE4 that engineers should know?
The LM2902KNSE4 integrates four general-purpose operational amplifiers in a 14-SOIC package. Each channel delivers a 1.2 MHz gain bandwidth product and 0.5 V/us slew rate, is unity-gain stable with internal compensation, and draws a typical 0.8 mA quiescent current largely independent of supply voltage. The supply range spans 3 V to 26 V single-supply or +/-13 V dual-supply, with common-mode input range extending to ground. The part carries an automotive temperature grade and, in the LM2902K improved version, a 2 kV ESD rating, per the Texas Instruments LM2902K product page.
Is LM2902KNSE4 the same as LM2902?
The LM2902KNSE4 is a member of the Texas Instruments LM2902 quad op-amp family; the base LM2902 designation describes the die and function, while the full part number encodes the package and compliance suffix. The KNSE4 suffix denotes the improved LM2902K die with 2 kV ESD rating in a 14-SOIC gull-wing package. Electrically all family members share the same pinout, 1.2 MHz gain bandwidth, 0.5 V/us slew rate, and 26 V maximum supply, so they are functionally interchangeable on identical footprints.
What is the best STMicroelectronics equivalent for LM2902KNSE4?
A widely used STMicroelectronics cross-brand equivalent for LM2902KNSE4 is the TS974 family quad op-amp in an SOIC-14 package, which shares the industry-standard quad pinout. ST Automotive-grade quad amplifiers can also serve as second sources. Because cross-brand substitutions must be verified against the exact package code, temperature grade, and supply ratings rather than assumed, request the cross-reference confirmation and the ST datasheet through the Request a Quote form on this page before releasing a cross-brand alternative to production.
Does LM2902KNSE4 require external compensation components?
No, the LM2902KNSE4 is internally frequency compensated, so each of its four amplifier channels is unity-gain stable without external capacitors or compensation networks. This simplifies design in high-gain configurations and saves board area. External components are still needed for the circuit function itself - feedback resistors, gain-setting networks, and a 0.1 uF decoupling capacitor at the shared supply pin 4 placed close to the device. For capacitive loads above the datasheet-recommended limit, add an isolation resistor in series with the output to preserve stability.
What is the quiescent current of LM2902KNSE4?
The LM2902KNSE4 draws a typical supply current of 0.8 mA per amplifier, and this drain is largely independent of supply voltage according to the Texas Instruments product information. A quad package at nominal bias therefore consumes roughly 3 to 4 mA of total quiescent current, making it suitable for low-power industrial and battery-backed automotive electronics. Actual consumption rises with output loading, so budget additional current for channels that drive significant loads continuously.
Where to buy LM2902KNSE4 online and what is the lead time?
LM2902KNSE4 can be ordered through the Request a Quote form on this page, where XAIPART confirms stock, unit pricing by quantity, and current lead time directly with sourcing partners. The suffix codes matter when quoting: the KNSE4 is a 14-SOIC tube-packed automotive-grade part, so state your required packing (tube or reel) and quantity break in the quote request. For production volumes, requesting a formal quotation also enables second-source alternatives to be evaluated in the same order.

工程參考資料,適用於 LM2902KNSE4 — 比較、設計指引及合規資訊。

選型指南

Choose the LM2902KNSE4 when you need four automotive-grade general-purpose amplifiers on a 5 V to 26 V single supply in a standard 14-SOIC footprint, particularly for ground-referenced sensor buffering, 4-20 mA transmitters, active filters, and power-supply supervision. Choose LM2902DR or LM2902DG4 when the improved 2 kV ESD die is not required and cost or reel packing matters more - they are pin-to-pin interchangeable on the same PCB. Choose LM324ADR only when the ambient temperature stays within commercial limits, since it trades the automotive grade for a wider 32 V supply rating. Avoid the LM2902 family altogether if your signals must swing within a few hundred millivolts of the positive rail or the input common-mode approaches VCC; in those cases a rail-to-rail CMOS quad is the appropriate class. All five parts listed here reuse the identical SOIC-14 land pattern, so footprint reuse across the family is free.

與替代品比較

參數 本產品 LM2902DR LM2902DG4 LM2902DE4 LM324ADR LM324ADRG4
Package 14-SOIC (5.30 mm width) 14-SOIC (5.30 mm width) - same 14-SOIC (5.30 mm width) - same 14-SOIC (5.30 mm width) - same 14-SOIC (5.30 mm width) - same 14-SOIC (5.30 mm width) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Number of Circuits 4 4 4 4 4 4
Gain Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Slew Rate 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us
Maximum Supply Voltage 26 V 26 V 26 V 26 V 32 V 32 V
Improved ESD Rating 2 kV (LM2902K) Standard Standard Standard Standard Standard
Temperature Grade Automotive Automotive Automotive Automotive Commercial Commercial
Quiescent Current (Typ, Per Amplifier) 0.8 mA 0.8 mA 0.8 mA 0.8 mA 0.8 mA 0.8 mA
Packaging Tube Tape & Reel Tube Tape & Reel Tape & Reel Tape & Reel

主要差異化特點

  • Improved 2 kV ESD robustness (對比LM2902DR)
  • Automotive temperature grade (對比LM324ADR)
  • Tube packaging for prototype builds (對比LM2902DR)

設計說明

Decouple the shared VCC pin (pin 4) with a 0.1 uF ceramic capacitor placed within a few millimeters of the pin, plus bulk capacitance as required by the load. Because all four channels share one supply node, a fast output stage can couple transients into the other three amplifiers through the supply; tight decoupling and a solid ground plane suppress this channel-to-channel crosstalk. Route sensitive inverting-node traces (pins 2, 6, 9, 13) short and guard them from adjacent output traces to avoid unintended feedback and oscillation.

Two classic LM2902 limitations must be respected. First, the output stage does not swing to the positive rail - under load, expect the high output to sit roughly 1.5 V below VCC, so design ADC scales and comparator thresholds with this headroom. Second, inputs can sense down to ground but performance degrades when the common-mode voltage approaches the positive rail; keep inputs comfortably below VCC minus about 1.5 V. Driving large capacitive loads directly can cause ringing - add a small series isolation resistor (about 50 ohm) at the output, per the stability guidance in the TI application literature for the LM2902 family.

The 1.2 MHz gain-bandwidth product is generous for DC and low-frequency conditioning but finite: at a closed-loop gain of 100, the -3 dB bandwidth falls to roughly 12 kHz with visible phase lag. For filter sections, verify the corner frequency against available bandwidth so Q does not peak unexpectedly. Because the channels share a die, thermal gradients from a hot channel can shift the offset of neighboring channels slightly; in precision applications, spread high-dissipation functions across channels or reserve one channel as a nulling buffer.

Estimated: with four channels each drawing a typical 0.8 mA quiescent current at 24 V, standby drain is roughly 3.2 mA x 24 V = about 77 mW, well within the SOIC-14 thermal capability with no heatsinking. Add load-current dissipation per channel when outputs drive significant loads continuously; at 10 mA output drive with 10 V headroom, each such channel adds an estimated 100 mW. Total dissipation below a few hundred milliwatts keeps junction temperature far below limits in standard 4-layer or 2-layer boards.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The E4 suffix on TI parts historically denotes RoHS/green compliance packaging, but explicit RoHS and REACH status for this exact MPN was not stated in the sourced listings; confirm on the TI product page before ordering.

資料驗證日期: 2026-11-08 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LM2902KNSE4 datasheet LM2902KNSE4 pinout LM2902KNSE4 price LM2902KNSE4 stock Texas Instruments LM2902KNSE4 LM2902KNSE4 equivalent LM2902KNSE4 replacement LM2902KNSE4 vs LM2902DG LM2902 quad op-amp SOIC-14 pinout LM2902KNSE4 application circuit quad 26V operational amplifier 1.2MHz LM2902KNSE4 footprint

相關元件與詞彙

Texas Instruments LM2902KNSE4 LM2902K LM2902 LM2902DR LM324ADR operational amplifier op-amp quad amplifier general-purpose amplifier linear amplifier IC gain bandwidth product slew rate quiescent current 14-SOIC SOIC package family surface mount RoHS ESD rating automotive temperature grade 4-20 mA transmitter active filter current sensing power supply supervision
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情