LM2902LVIPWR - Quad 5.5V 1MHz Low-Voltage Op Amp | Texas Instruments
MPN: LM2902LVIPWR ✓ 啟用中LM2902LVIPWR 概覽
An operational amplifier, or op amp, is an analog active device that amplifies the voltage difference between its inverting and non-inverting inputs. The LM2902LV contains four independent amplifiers in one package, making it a practical choice for multi-channel signal-conditioning boards. Its hierarchy runs from operational amplifier to analog signal-chain IC and ultimately to semiconductor, while the quad configuration consolidates four channels without requiring four separate packages.
Key features include operation from 2.7V to 5.5V, a 1 MHz unity-gain bandwidth, and a typical input offset voltage of 3 mV. The single-supply architecture supports modern 3.3V and 5V systems where the previous high-voltage LM2902 generation would consume more power. A 14-pin TSSOP package also provides a compact surface-mount footprint suitable for automated assembly and space-constrained analog boards.
The LM2902LV belongs to the industry-standard LM290xLV family, which also includes the dual LM2904LV. Four amplifiers can implement independent gain, buffer, comparator, filtering, or instrumentation functions, although they do not include a dedicated output latch. Designers should account for input common-mode limits, output swing, noise, and stability when configuring each channel around the device's application information.
Typical uses include sensor-signal conditioning, low-frequency active filtering, current measurement, control loops, audio preamplification, and general-purpose buffering. The 1 MHz bandwidth is appropriate for low-to-moderate frequency signals rather than high-speed video or RF chains. When several channels carry related signals, matching channels within one package can also simplify layout symmetry and simplify control of analog grounding.
For PCB design, route each amplifier's feedback components close to its pins and keep sensitive input traces away from switching nodes. Because the LM2902LV operates from a single positive supply, the signal reference is the ground rail, and input and output voltages must remain within the electrical limits stated by the manufacturer. Confirm stability with the intended gain, load, and output-capacitance configuration before releasing a production layout.
直接替換替代品,適用於 LM2902LVIPWR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LM2902LVIPW
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LM2902LVIPWR-Q1
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LM2902LVIPWR 最大額定值與電氣特性
| Number of Amplifiers | 4 channels |
| Product Type | Standard general-purpose operational amplifier |
| Maximum Supply Voltage | 5.5 V |
| Operating Supply Voltage Range | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Input Offset Voltage | 3 mV |
| Package Type | TSSOP (PW), 14 pins |
| 工作溫度範圍 | -40°C to +125°C |
| 安裝類型 | Surface mount |
LM2902LVIPWR 腳位配置
| 腳位 1 | OUT1 — Amplifier 1 output |
| 腳位 2 | IN1- — Amplifier 1 inverting input |
| 腳位 3 | IN1+ — Amplifier 1 noninverting input |
| 腳位 4 | V- — Negative power supply |
| 腳位 5 | IN2+ — Amplifier 2 noninverting input |
| 腳位 6 | IN2- — Amplifier 2 inverting input |
| 腳位 7 | OUT2 — Amplifier 2 output |
| 腳位 8 | OUT3 — Amplifier 3 output |
| 腳位 9 | IN3- — Amplifier 3 inverting input |
| 腳位 10 | IN3+ — Amplifier 3 noninverting input |
| 腳位 11 | V+ — Positive power supply |
| 腳位 12 | IN4+ — Amplifier 4 noninverting input |
| 腳位 13 | IN4- — Amplifier 4 inverting input |
| 腳位 14 | OUT4 — Amplifier 4 output |
典型應用
LM2902LVIPWR 適用於 6 應用s: Sensor Signal Conditioning, Low-Frequency Active Filtering, Current-Sense Amplification, Audio Preamplification and Mixing, Industrial Control Loops, General-Purpose Analog Buffering.
Sensor Signal Conditioning
The LM2902LVIPWR suits four-channel sensor front ends because it combines four amplifiers, operation from 2.7V to 5.5V, and a 1 MHz gain-bandwidth product in one 14-pin TSSOP package. Two channels can amplify strain-gauge or temperature-sensor signals while the remaining channels provide active filtering and buffering. Keep high-impedance sensor traces short, place input bias resistors close to the noninverting inputs, and route analog returns away from switching converters. The 3 mV input offset is acceptable for many cost-sensitive measurements, but precision bridges should account for it during error budgeting.
推薦
Low-Frequency Active Filtering
The LM2902LVIPWR can implement four independently configured active low-pass or band-pass stages because each channel provides a complete operational amplifier with a 1 MHz gain-bandwidth product. Its 2.7V-to-5.5V supply range supports 3.3V and 5V analog systems, while the 14-pin TSSOP outline keeps the board compact. Place feedback resistors and capacitors adjacent to the relevant pins and confirm stability with the intended load and output capacitance. The amplifier is appropriate for audio-band and instrumentation signals rather than wideband communications filtering.
推薦
Current-Sense Amplification
The LM2902LVIPWR is useful for multiple current-sense channels where a shunt voltage must be amplified into a larger analog signal. Its four channels allow two differential measurements plus two output buffers or filters, and the 5.5V maximum supply simplifies use in 3.3V and 5V systems. The 3 mV input offset translates into a measurable shunt-voltage error for very small sense currents, so select the gain and feedback network with that error included. Kelvin connections and symmetrical routing help reduce offset contributed by copper and temperature gradients.
推薦
Audio Preamplification and Mixing
The LM2902LVIPWR can provide four low-frequency preamplifier or summing stages in audio and control equipment. Its 1 MHz bandwidth covers conventional audio-band signals, and the low-voltage operation allows the same device to operate from a 3.3V rail. The quad package reduces component count in multichannel mixers, although each channel requires adequate output-headroom analysis at the selected load. Keep input coupling and feedback paths compact, and connect the unused amplifier channels to a stable reference within their common-mode limits rather than leaving them floating.
推薦
Industrial Control Loops
The LM2902LVIPWR fits low-voltage industrial control modules that need error amplification, current feedback, and output buffering around a controller. Four channels provide flexible analog conditioning for a power-conversion or actuator-control board, with a -40°C-to-+125°C operating range supporting industrial temperature conditions. The 5.5V limit makes the device appropriate for modern control rails rather than legacy 24V analog sections. Maintain separation between sensitive feedback nodes and high-current switching paths, and check output drive and stability against the actual load capacitance.
推薦
General-Purpose Analog Buffering
The LM2902LVIPWR consolidates four general-purpose buffer functions into one compact surface-mount package. Buffers can isolate sensor outputs, drive ADC inputs, support impedance conversion, and provide reference conditioning in a mixed-signal design. The 1 MHz gain-bandwidth product is suitable for slow analog signals, while the 2.7V-to-5.5V supply range fits both 3.3V and 5V rails. Place the device close to the sources it buffers, use a continuous analog ground plane, and verify input bias current against the source impedance when driving a high-impedance node.
推薦
工程參考資料,適用於 LM2902LVIPWR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Package | TSSOP (PW), 14 pins |
| Brand | Texas Instruments |
| Number of Amplifiers | 4 |
| Maximum Supply Voltage | 5.5 V |
| Operating Supply Voltage Range | 2.7 V to 5.5 V |
| Gain-Bandwidth Product | 1 MHz |
| Input Offset Voltage | 3 mV |
| Operating Temperature Range | -40°C to +125°C |
主要差異化特點
- Four amplifier channels in one package (對比LM2904LV)
- Low-voltage supply operation (對比LM2902)
- Compact industry-standard surface-mount footprint (對比LM2902LV in SOIC)
設計說明
Place each amplifier's feedback resistors, gain-setting network, and compensation capacitor directly beside the associated pins. Keep the four input traces away from switching-regulator nodes and relay or motor drive paths. Because the TSSOP footprint is compact, verify the pin map against the manufacturer connection diagram before routing and confirm exposed-pad or thermal requirements for the specific package variant.
The LM2902LVIPWR is a low-voltage device with a 5.5V maximum supply rating. Decouple the V+ and V- pins with local ceramic capacitance and route the return current through a quiet analog ground path. Do not substitute a 5V rail for an 8V or 12V legacy supply, and confirm that transients at the supply pins remain below the absolute maximum rating specified by the manufacturer.
Do not treat the original high-voltage LM2902 as an automatic replacement for the LM2902LV. Although both provide four amplifiers, the LM2902LV family operates from 2.7V to 5.5V, while the original LM2902 has a higher supply-voltage range. Also avoid leaving unused amplifier inputs floating; connect them to a valid common-mode voltage after checking the input-bias and stability requirements.
合規資訊
The operating temperature range is -40°C to +125°C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations should be confirmed against the manufacturer product page for the exact ordering code.