STMicroelectronics

LM2903HYDT - Dual 36V Open-Collector Comparator | STMicroelectronics

MPN: LM2903HYDT ✓ 啟用中
2 V to 36 V Vdss 0.4 mA Id 8-pin SOIC Package
MOQ: 1 |

LM2903HYDT 概覽

The STMicroelectronics LM2903HYDT is a low-power dual differential voltage comparator with two independent comparison channels, a supply range of 2 V to 36 V, and open-collector outputs in an 8-pin SOIC package. Each channel supports single-supply or dual-supply operation, while the differential input range extends to the maximum rated supply voltage. The typical supply current is 0.4 mA, and the input bias current is 25 nA.

A voltage comparator is an analog integrated circuit that compares two input voltages and produces a logic-level indication of their relationship. The LM2903HYDT belongs to the comparator hierarchy within analog ICs and interface ICs. Its two channels can be used independently, with one channel referenced to ground for single-supply operation or both channels operating from positive and negative rails in dual-supply systems. The open-collector output allows the output state to be pulled up to a suitable external voltage.

Key electrical characteristics include a low typical supply current of 0.4 mA, a typical input bias current of 25 nA, and a typical input offset current of ±5 nA. The input common-mode voltage range includes ground, which supports single-supply sensing near 0 V. The open-collector output has a typical low saturation voltage of 250 mV at an output current of 4 mA, while the differential input voltage range equals the maximum rated supply voltage.

The LM2903HYDT combines two differential comparators in one package, reducing board area in designs that require more than one threshold decision. Its low operating current suits battery-operated and low-power monitoring systems. Because the outputs are open collector, applications can select the pull-up voltage independently and can wire multiple open-collector outputs together when wired-AND behavior is required. A pull-up resistor is required for normal high-level output operation.

Typical uses include overvoltage and undervoltage monitoring, industrial sensor thresholds, battery-pack protection, motor-control interfaces, window or level detection, and general-purpose digital thresholding. The two independent channels can monitor different supply rails or implement hysteresis around a reference voltage. For sensitive systems, input bias current, offset voltage, common-mode limits, output leakage, and propagation delay should be checked against the sensing network and logic family.

PCB implementation should keep the comparator inputs away from switching nodes and high-current paths. Place the input resistors and optional hysteresis network close to the associated pins, provide a solid ground return, and route open-collector pull-ups away from sensitive analog inputs. If the input signals can switch rapidly, minimize parasitic capacitance and verify that the external network does not cause input overvoltage during transients.

This page combines the electrical limits, package details, pin assignments, practical application guidance, and confirmed pin-compatible alternatives for the LM2903HYDT. It also identifies the parameters that require verification against the latest STMicroelectronics datasheet before production release or unqualified second-source use.

直接替換替代品,適用於 LM2903HYDT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2903HYDT (相同外形與佔位) — 差異在於 Comparator Type, Output Type, Package, Automotive Qualification, Operating Temperature Range.

Texas Instruments
Comparator Type: Differential, general purpose
Output Type: Open-Collector / Open-Drain, Rail-to-Rail
Package: 8-SOIC (D), 0.154 in (3.90 mm) body width
比較對象 LM2903HYDT →
Texas Instruments
Comparator Type: Dual differential comparator
Output Type: Open-collector
Package: 8-pin SOIC (D)
比較對象 LM2903HYDT →
STMicroelectronics
Comparator Type: 2 channels
Output Type: Open-collector
Automotive Qualification: Not applicable
比較對象 LM2903HYDT →

LM2903HD

✅ 直接替換
STMicroelectronics
📦 8-pin SOIC
2 channels · Dual differential voltage comparator · Open-collector · 2 V to 36 V · ±1 V to ±18 V · 0.4 mA typical per comparator · 25 nA typical · 8-pin SOIC

聯絡詢價

查看資料表 →

LM2903BIDR

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

聯絡詢價

查看資料表 →

LM2903AVQDRQ1

✅ 直接替換
Texas Instruments
📦 8-pin SOIC
Differential, general purpose · 2 · Open-Collector / Open-Drain, Rail-to-Rail · 2 V to 36 V · +/-1 V to +/-18 V · Rail-to-Rail · 0.4 mA per channel (distributor specification listing) · 1.3 us

聯絡詢價

查看資料表 →

LM2903HYDT 最大額定值與電氣特性

Comparator Type Low-power dual differential voltage comparator
Number of Channels 2 channels
Supply Voltage Range 2 V to 36 V
Dual-Supply Operating Range ±1 V to ±18 V
Typical Supply Current 0.4 mA
Typical Power Consumption per Comparator 1 mW at 5 V
Typical Input Bias Current 25 nA
Typical Input Offset Current ±5 nA
Input Common-Mode Voltage Range Includes ground
Differential Input Voltage Range Equal to maximum rated supply voltage
輸出類型 Open-collector, rail-to-rail
Typical Low Saturation Voltage 250 mV at 4 mA output current
Propagation Delay 1.3 µs
封裝 8-pin SOIC
安裝類型 Surface mount
Packaging Tape and reel
Automotive Qualification AEC-Q100 qualified

LM2903HYDT 腳位配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
腳位 1 OUT1 — Comparator 1 open-collector output
腳位 2 IN1- — Comparator 1 inverting input
腳位 3 IN1+ — Comparator 1 non-inverting input
腳位 4 VCC- — Ground connection
腳位 5 IN2+ — Comparator 2 non-inverting input
腳位 6 IN2- — Comparator 2 inverting input
腳位 7 OUT2 — Comparator 2 open-collector output
腳位 8 VCC+ — Positive supply connection

典型應用

LM2903HYDT 適用於 6 應用s: Battery Overvoltage and Undervoltage Detection, Industrial Sensor Threshold Conditioning, Automotive Supply Rail Supervision, Motor and Actuator Control Interface, Window and Level Limit Detection, Low-Power Monitoring and Alarm System.

🔋

Battery Overvoltage and Undervoltage Detection

The LM2903HYDT fits battery-protection circuits because its two differential channels can monitor separate voltage thresholds while operating from a 2 V to 36 V supply range. A resistor-divider network can scale each battery rail into the common-mode input range, while the comparators produce open-collector fault signals for a charger or controller. Its typical 0.4 mA supply current is useful in portable systems. Design the dividers around the 25 nA typical input bias current and check the 1.3 µs propagation delay against the protection response time. A pull-up resistor establishes each digital fault level, and hysteresis can prevent repeated switching when the battery voltage changes near a threshold.

🏭

Industrial Sensor Threshold Conditioning

The LM2903HYDT is useful for converting a scaled sensor or process voltage into a logic decision. Its differential inputs allow a sensor signal to be compared with a reference, and the two channels can support two related thresholds or complementary conditions. The common-mode input range includes ground, which helps with signals near the lower rail, while the 36 V maximum supply gives useful headroom in industrial systems. The low saturation voltage of 250 mV typical at 4 mA helps drive a pull-up load without a separate buffer. Apply input filtering carefully so excessive capacitance does not distort the 1.3 µs propagation delay or encourage oscillation around the decision point.

🚗

Automotive Supply Rail Supervision

The LM2903HYDT is appropriate for automotive rail supervision because the part is identified with AEC-Q100 qualification and combines two differential channels in an 8-pin SOIC package. Each channel can monitor a divided 12 V, 24 V, or other vehicle rail and assert an open-collector fault signal when the voltage crosses its configured limit. The 2 V to 36 V operating range supports several vehicle electrical systems. Engine-bay placement still requires careful attention to transient protection, grounding, and wiring because logic qualification does not remove external automotive surge requirements. Use the manufacturer electrical limits to define resistor ratings and protection components, and verify the exact temperature grade for the production vehicle program.

⚙️

Motor and Actuator Control Interface

The LM2903HYDT can form the decision stage between a motor or actuator sensor and a control input. Its differential inputs support comparison of a position, speed, or current-sense signal against a reference, while the open-collector output can pull down a gate-driver or logic input. The 36 V supply capability is useful for powered industrial systems, and the low typical supply current of 0.4 mA reduces control overhead. Add hysteresis with positive feedback when the monitored signal has noise near the threshold. Because the output can sink rather than source current, choose a pull-up voltage compatible with the driven interface and verify that the connected device accepts the output's voltage and timing characteristics.

📊

Window and Level Limit Detection

The LM2903HYDT can implement digital upper and lower limits for a potentiometer, liquid-level sensor, or position element. One channel can detect the upper boundary and the other the lower boundary, allowing two open-collector signals to feed a controller or indicator. The differential-input architecture helps reject common voltage offsets shared by the sensed signal and reference. For a resistive sensor, account for the 25 nA typical input bias current and ±5 nA typical input offset current when selecting resistor values. Add deliberate hysteresis to slow movement or sensor noise near each limit, and use separate pull-up resistors if the two output states require independent logic levels.

🧩

Low-Power Monitoring and Alarm System

The LM2903HYDT suits low-power monitoring systems because two comparator channels share one package and the typical supply current is only 0.4 mA. The channels can watch a sensor rail and a status line, or form a window comparator around an analog measurement. Its open-collector outputs are practical for driving an alarm or microcontroller interrupt when combined with pull-up resistors. The common-mode range including ground supports monitoring near zero volts, while the 36 V maximum operating voltage covers many industrial rails. Define the alarm thresholds using the input offset and sensor accuracy, then add hysteresis to prevent chatter. Ensure that leakage in long wiring or high-impedance sensor networks does not shift the intended threshold.

What is the operating voltage range of LM2903HYDT?
The LM2903HYDT operates from 2 V to 36 V on a single supply or from ±1 V to ±18 V on dual supplies. According to the STMicroelectronics LM2903 datasheet, the differential input range also extends to the maximum rated supply voltage. The device therefore supports low-voltage logic systems as well as higher-voltage industrial and automotive sensing circuits.
What is the supply current of LM2903HYDT?
The LM2903HYDT typically consumes 0.4 mA across the dual-comparator device. The STMicroelectronics datasheet identifies this as approximately 1 mW per comparator at 5 V, making the part suitable for low-power monitoring and threshold-detection circuits. Actual current depends on supply voltage, output state, leakage current, and the load connected to each open-collector output.
Where can I download the LM2903HYDT datasheet PDF?
The LM2903HYDT datasheet PDF can be accessed through the manufacturer-datasheet link on this page and through the mirrored manufacturer PDF linked in the technical documents. It describes the 8-pin SOIC package, electrical limits, input and output characteristics, and application information. Confirm the document revision and operating-temperature grade against the orderable suffix before production release.
Where is the LM2903HYDT pinout located?
The LM2903HYDT pinout is shown in the pin-assignment table on this page and in the manufacturer datasheet linked above. The 8-pin SOIC arrangement places OUT1 on pin 1, the first inverting input on pin 2, the first non-inverting input on pin 3, ground on pin 4, the second non-inverting input on pin 5, the second inverting input on pin 6, OUT2 on pin 7, and the positive supply on pin 8.
How does LM2903HYDT compare with TI LM2903BIDR?
The STMicroelectronics LM2903HYDT and TI LM2903BIDR are dual, open-collector comparators that can share an 8-pin SOIC footprint. The TI LM2903BIDR is identified as pin-for-pin compatible with the LM2903 family, while the LM2903HYDT is the AEC-Q100-qualified automotive-temperature option. Confirm input offset, common-mode limits, leakage, propagation delay, and lifecycle requirements before substituting one for the other.
When should I choose LM2903HYDT over TI LM2903AVQDRQ1?
Choose the LM2903HYDT when an AEC-Q100-qualified, 8-pin SOIC dual comparator is required for an automotive or high-reliability application. The TI LM2903AVQDRQ1 is also an 8-pin SOIC automotive dual comparator with open-collector outputs, so it is a relevant alternative. The final choice should follow a side-by-side review of temperature range, input offset, supply current, propagation delay, and qualification documents.
What is the best drop-in replacement for LM2903HYDT?
No single replacement can be declared universally drop-in without comparing operating conditions, but LM2903HD, TI LM2903BIDR, and TI LM2903AVQDRQ1 are documented 8-pin SOIC candidates with closely related open-collector dual-comparator functions. The LM2903HD is closest within the STMicroelectronics family. Verify pin polarity, temperature grade, offset voltage, common-mode range, output leakage, and automotive qualification before using any candidate in production.
Can TI LM2903BIDR replace LM2903HYDT?
TI LM2903BIDR can be a pin-compatible replacement candidate because TI identifies the LM2903B family as pin-for-pin compatible with the LM2903, and the replacement discussion identifies LM2903BIDR in an 8-pin SOIC package. It is not an automatic substitution for every LM2903HYDT design: compare the automotive-temperature grade, input offset, supply current, common-mode limits, and protection requirements first.
What can replace LM2903HYDT in an automotive design?
LM2903HYDT itself is identified as an AEC-Q100-qualified automotive dual comparator in 8-pin SOIC packaging. The TI LM2903AVQDRQ1 is a directly relevant automotive, 8-pin SOIC, open-collector alternative. Treat it as a candidate replacement rather than an unconditional substitution because qualification scope, temperature range, offset voltage, propagation delay, and electrical limits must match the design requirements.
Is LM2903HYDT suitable for battery voltage monitoring?
Yes, the LM2903HYDT is suitable for many battery-monitoring threshold circuits because it operates from 2 V to 36 V and has a typical supply current of 0.4 mA. Use one channel to compare a divided battery voltage with a reference and the other for a second threshold or hysteresis state. Account for input offset current, comparator input bias, reference accuracy, and leakage of the battery divider.
What are the key specifications of LM2903HYDT that engineers should know?
The LM2903HYDT is a 2-channel differential comparator with a 2 V to 36 V supply range, open-collector rail-to-rail outputs, and an 8-pin SOIC package. Other important values include 0.4 mA typical supply current, 25 nA typical input bias current, ±5 nA typical input offset current, 1.3 µs propagation delay, and 250 mV typical output saturation at 4 mA. These values define its suitability for low-power thresholding and industrial sensing.
Does LM2903HYDT need an output pull-up resistor?
Yes, each LM2903HYDT open-collector output requires an external pull-up resistor to establish a high output level. The resistor can connect to a supply compatible with the following logic circuit, subject to the output voltage and current limits in the manufacturer datasheet. Because the outputs are open collector, multiple comparator outputs may share a pull-up where wired-AND behavior is acceptable.
How do I add hysteresis to LM2903HYDT?
Add positive feedback from each output to its associated non-inverting input to create hysteresis and prevent output chatter around a changing threshold. The feedback resistor and input reference network must be sized around the comparator offset, bias current, leakage, and the pull-up resistance. Confirm that the resulting positive-feedback network preserves the intended logic polarity and does not exceed the input common-mode range.
Where can I buy LM2903HYDT online?
Use the Request a Quote form on this page to request LM2903HYDT pricing, current stock, lead time, and order quantities. The form allows buyers to specify the required quantity, package form, and automotive qualification requirements. Production planners should also request the current manufacturer lifecycle and traceability information before releasing the part into a new design.
What is the price of LM2903HYDT?
Current pricing for the exact LM2903HYDT order code is available through the Request a Quote form on this page. The form is the appropriate channel for volume pricing, availability, lead time, and delivery requirements. For the BOM, preserve the HYDT suffix and specify whether the required quantity is for tape-and-reel production use rather than a non-production assembly format.
What is the lead time for LM2903HYDT?
Current lead time for LM2903HYDT should be requested through the Request a Quote form on this page, together with the required annual and order quantities. Availability can vary by package form, quantity, and manufacturing schedule, so a confirmed allocation is more useful than a generic stock estimate. Include the target delivery date when submitting the request.

工程參考資料,適用於 LM2903HYDT — 比較、設計指引及合規資訊。

選型指南

Choose the LM2903HYDT when the design needs two independent open-collector comparison channels, a 2 V to 36 V operating range, and an AEC-Q100-qualified 8-pin SOIC option. Select LM2903HD when it is the closest STMicroelectronics ordering alternative and its temperature grade and qualification status satisfy the application. Consider TI LM2903BIDR when its electrical limits, qualification status, and lifecycle conditions are preferable for a non-automotive industrial design. Consider TI LM2903AVQDRQ1 for another 8-pin SOIC automotive dual-comparator source, but verify offset voltage, input bias current, propagation delay, leakage, and common-mode limits before substitution. In every case, confirm the pull-up voltage, output-current budget, hysteresis network, input protection, and PCB footprint. The three listed alternatives share the SOIC-8 format and dual open-collector architecture, but only a complete electrical and qualification review establishes suitability as a drop-in production replacement.

與替代品比較

參數 本產品 LM2903HD LM2903BIDR LM2903AVQDRQ1
Brand STMicroelectronics STMicroelectronics Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC 8-pin SOIC
Comparator Configuration Dual differential comparator Dual differential comparator Dual differential comparator Dual differential comparator

主要差異化特點

  • AEC-Q100-qualified dual-comparator option in a standard 8-pin SOIC footprint (對比LM2903HD)
  • Two independent 36 V-capable comparison channels in one package (對比LM2903BIDR)
  • Low 0.4 mA typical supply consumption for dual thresholding (對比LM2903AVQDRQ1)

設計說明

Do not treat the open-collector outputs as actively driven high outputs. Install a pull-up resistor on each output, and select its voltage within the comparator output ratings and the driven logic family's requirements. Multiple open-collector outputs can share a pull-up when wired-AND behavior is intended, but this also ties their fault states together and can create an unintended combined load.

Keep the two input pairs short and away from switching nodes, motor traces, and high-current return paths. Connect the ground pin to a low-impedance ground plane, place optional input and hysteresis resistors close to the relevant pins, and route output pull-ups away from sensitive analog inputs. For high-impedance sensor networks, account for the 25 nA typical input bias current and input leakage when estimating threshold error.

Add hysteresis when the input signal can cross the threshold slowly or contains noise; positive feedback from OUT1 to IN1+ and OUT2 to IN2+ creates separated switching levels. Size the feedback network around the input offset, output saturation, and pull-up resistance. Confirm that the 1.3 µs typical propagation delay is acceptable and that input-node capacitance does not cause excessive delay or oscillation.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The LM2903HYDT is identified as AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer compliance documentation.

相關搜尋

LM2903HYDT LM2903HYDT datasheet LM2903HYDT datasheet pdf LM2903HYDT pinout LM2903HYDT equivalent LM2903HYDT replacement LM2903HYDT drop-in replacement LM2903HYDT price LM2903HYDT stock STMicroelectronics LM2903HYDT LM2903HYDT vs LM2903HD LM2903HYDT 36V comparator LM2903HYDT SOIC-8 LM2903HYDT application circuit

相關元件與詞彙

STMicroelectronics LM2903HYDT LM2903HD LM2903BIDR LM2903AVQDRQ1 voltage comparator dual differential comparator analog comparator interface IC open-collector output rail-to-rail output single-supply operation dual-supply operation SOIC-8 surface-mount package AEC-Q100 RoHS REACH input bias current input offset current common-mode voltage range propagation delay battery monitoring industrial sensor conditioning automotive rail supervision
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情