LM2903QM8-13 - Dual 36V Comparator | Diodes Inc.
MPN: LM2903QM8-13 ✓ 啟用中LM2903QM8-13 概覽
A voltage comparator is an analog integrated circuit that compares two input voltages and switches its output when the difference crosses a defined threshold. The LM2903 belongs to the broader comparator hierarchy within analog ICs and signal-conditioning electronics. Each of its two channels includes a noninverting input, an inverting input, and an output, allowing one device to perform threshold detection, window comparison, or independent level sensing.
Key features include low input offset voltage, low input bias current, 5 nA output leakage current, and low output saturation voltage of 200 mV at 4 mA. The LM2903QM8-13 is identified as an automotive-compliant Q-grade device, while its lead-free construction and full RoHS compliance support environmentally constrained production programs. Its open-collector-style output is compatible with TTL, MOS, and CMOS logic systems.
Technically, the device combines precision differential input handling with practical supply-voltage tolerance. The comparators can operate across a broad input range because the common-mode input voltage includes ground while the differential input range can extend to the power-supply voltage. This makes the device useful where sensing signals may approach 0 V or where input stages share the comparator supply rail. Designers should still verify absolute maximum conditions and output pull-up arrangements for the specific operating environment.
Typical uses include automotive battery and rail monitoring, sensor threshold detection, window comparators, overvoltage and undervoltage detection, industrial control thresholds, and digital-interface signaling. The dual-channel organization saves board area when two independent decisions are required, while the 8-MSOP package supports compact surface-mount assemblies.
For implementation, use a suitable pull-up resistor on each open-collector output and account for output-leakage effects when the output is high. Keep sensitive input traces short, provide a stable local supply connection, and verify common-mode, differential, and absolute-maximum limits before applying large transient voltages.
This page combines the manufacturer specifications, automotive qualification details, package information, drop-in alternatives, and practical circuit guidance into a design-oriented reference for engineers evaluating the LM2903QM8-13.
直接替換替代品,適用於 LM2903QM8-13 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2903QM8-13 (相同外形與佔位) — 差異在於 Comparator Type, Package, Differential Input Voltage Range, Halogen and Antimony, Input Bias Current.
LM2903AQM8-13
✅ 直接替換聯絡詢價
查看資料表 →LM2903M8-13
✅ 直接替換聯絡詢價
查看資料表 →LM2903AM8-13
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LM2903QM8-13 最大額定值與電氣特性
| Comparator Type | General-purpose differential voltage comparator |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 36 V |
| Input Offset Voltage | 2 mV |
| Input Bias Current | 25 nA |
| 供應電流 | 0.6 mA |
| Output Leakage Current | 5 nA |
| Output Saturation Voltage | 200 mV at 4 mA |
| Common-Mode Input Voltage Range | Includes ground |
| Differential Input Voltage Range | Equal to the power-supply voltage |
| Output Compatibility | TTL, MOS, and CMOS compatible |
| 封裝 | 8-MSOP |
| 安裝類型 | Surface mount |
| Automotive Grade | AEC-Q100 Grade 1 qualified |
| Lead-Free Construction | Yes |
| RoHS 狀態 | Compliant |
| Halogen and Antimony | Free |
LM2903QM8-13 腳位配置
| 腳位 1 | OUT 1 — Comparator 1 output |
| 腳位 2 | IN 1- — Comparator 1 inverting input |
| 腳位 3 | IN 1+ — Comparator 1 noninverting input |
| 腳位 4 | GND — Ground connection |
| 腳位 5 | IN 2+ — Comparator 2 noninverting input |
| 腳位 6 | IN 2- — Comparator 2 inverting input |
| 腳位 7 | OUT 2 — Comparator 2 output |
| 腳位 8 | VCC — Positive supply connection |
典型應用
LM2903QM8-13 適用於 6 應用s: Automotive Battery Threshold Detection, Industrial Overvoltage and Undervoltage Detection, Sensor Level Conditioning, Window Comparator, Power Supply Sequencing, Digital Interface Signal Qualification.
Automotive Battery Threshold Detection
The LM2903QM8-13 fits automotive battery-monitoring circuits because it combines a 36 V maximum supply rating with AEC-Q100 Grade 1 qualification. Place one channel near a divided battery signal and use the other channel for an independent upper or lower threshold. The 2 mV input offset defines the nominal comparison boundary, while the common-mode input range including ground supports sensing signals near zero volts. Both outputs require pull-up resistors because the comparator uses an open-collector output architecture. Design the divider and protection network so automotive transients remain below the absolute-maximum input and supply limits.
推薦
Industrial Overvoltage and Undervoltage Detection
The LM2903QM8-13 supports independent upper and lower rail-threshold checks in industrial control equipment. Its two differential channels can compare scaled supply voltages against precise references, while the 36 V maximum supply rating provides operating margin for 24 V industrial systems. The 2 mV input offset is suitable when the system requires threshold accuracy after divider and reference errors are included in the total error budget. Use a separate pull-up for each output and ensure the selected resistor supports the required sink current without exceeding the 200 mV saturation specification at 4 mA.
推薦
Sensor Level Conditioning
The LM2903QM8-13 is useful when a sensor produces a low-level analog signal that must be converted into a digital decision. Its 25 nA input bias current minimizes loading on high-impedance sensor networks, and the 2 mV offset provides a defined switching boundary around the selected reference. The differential inputs permit either polarity of comparison, while the common-mode range including ground simplifies sensing near the lower supply rail. Keep the sensor source and reference paths short, add guarding where leakage matters, and account for input and output propagation delay when the result feeds a rapidly changing control loop.
推薦
Window Comparator
Use the two independent LM2903QM8-13 channels to create a window comparator that indicates when a measured voltage lies between two limits. One channel compares the signal against the upper reference, and the other compares it against the lower reference; external logic can then interpret their outputs. The 2 mV offset of each channel sets part of the transition accuracy, while the 36 V supply capability accommodates many protected industrial inputs after scaling. Add hysteresis resistors to prevent output chatter near each threshold, and choose pull-up values that balance rise time against output-current demand.
推薦
Power Supply Sequencing
The LM2903QM8-13 can monitor multiple power rails and provide a discrete enable decision when their voltages cross programmed thresholds. The two channels allow two sequencing decisions without using two separate comparator packages, and the open-collector outputs can be pulled up to the voltage expected by downstream sequencing logic. The common-mode input range including ground simplifies monitoring of the first rail in a sequence. Consider hysteresis to prevent repeated enable toggles during startup, and confirm that the supply voltage remains within the comparator's operating and absolute-maximum limits during power-down.
推薦
Digital Interface Signal Qualification
The LM2903QM8-13 can qualify a slow-changing analog or digital-derived signal before it enters a logic system. Its low 25 nA input bias current reduces disturbance to high-impedance signals, while 5 nA output leakage current helps the pulled-up output retain a valid high level. The device is particularly suitable for TTL, MOS, and CMOS-compatible interfacing according to the Diodes Incorporated family description. Select the pull-up voltage and resistance for the receiving logic, maintain a defined path for every output state, and verify that the selected channel's input threshold matches the actual signal amplitude and noise margin.
推薦
推薦產品摘要
工程參考資料,適用於 LM2903QM8-13 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM2903AQM8-13 | LM2903M8-13 | LM2903AM8-13 |
|---|---|---|---|---|
| Brand | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated | Diodes Incorporated |
| Package | 8-MSOP | 8-MSOP - same | 8-MSOP - same | 8-MSOP - same |
| Comparator Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Input Offset Voltage | 2 mV | 1 mV | 2 mV | 1 mV |
| Automotive Qualification | AEC-Q100 Grade 1 | AEC-Q100 Grade 1 | Not AEC-Q100 designated | Not AEC-Q100 designated |
主要差異化特點
- Lower documented input offset in the A-grade counterpart (對比LM2903AQM8-13)
- Automotive-compliant ordering option (對比LM2903M8-13)
- Precision and automotive qualification in one package (對比LM2903AM8-13)
設計說明
Do not treat the 2 mV input offset as the only source of switching error. Divider tolerance, reference accuracy, input bias current, output saturation, propagation delay, and hysteresis can dominate a practical threshold design. Calculate the complete error budget, especially when the LM2903QM8-13 detects a battery or industrial supply close to its set point. Add hysteresis where chatter would repeatedly switch the downstream load.
Connect each open-collector output to its pull-up resistor with a short trace, and place the resistor near the receiving logic device to minimize coupling between adjacent channels. Route the two input pairs away from switching nodes and power inductors. Maintain a low-impedance ground return for the comparator, especially when sensing signals near ground, because supply and ground bounce can appear directly as threshold error at the inputs.
The dual LM2903QM8-13 is specified at 0.6 mA supply current, but the total power and transient demand can change with output state, pull-up resistance, and input voltage. Keep the 36 V rating in perspective: it is a maximum rating, not a recommended operating point. Automotive and industrial inputs generally require divider networks, filtering, and clamp protection that prevent transient or fault conditions from reaching the absolute-maximum limits.
合規資訊
The Diodes Incorporated LM2903 family page identifies the devices as fully RoHS compliant, lead-free, and free of halogen and antimony. The LM2903Q/LM2903AQ datasheet states that LM2903Q devices use green mold compound and are qualified to AEC-Q100 Grade 1 for automotive-compliant applications.