Texas Instruments

LM2904ITPX/NOPB - Dual 26V, 700kHz Op Amp | Texas Instruments

MPN: LM2904ITPX/NOPB ✓ 啟用中
26 V Vdss 8-DSBGA (8-UFBGA) Package Internal Speed
MOQ: 1 |

LM2904ITPX/NOPB 概覽

Texas Instruments LM2904ITPX/NOPB is a dual, general-purpose operational amplifier with two independent, internally frequency-compensated amplifiers, a maximum supply rating of 26 V, and a gain-bandwidth product of 700 kHz. The device is supplied in an 8-DSBGA package and is intended for single-supply operation across a broad voltage range.

An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its differential inputs. Its high open-loop gain, negative feedback operation, and internal frequency compensation make it useful for signal conditioning, comparison, filtering, and instrumentation. The LM2904 contains two amplifier channels in one package, allowing one IC to serve two related analog functions.

The LM2904ITPX/NOPB provides two amplifier circuits in a compact 8-DSBGA package. Texas Instruments describes the device as a low-power dual operational amplifier with a 700 kHz gain-bandwidth product. A listing for the exact MPN also identifies a 0.1 V/µs slew rate, surface-mount construction, and a -40°C to 85°C temperature range. Tape-and-reel packaging supports automated assembly and high-volume production.

Internally frequency compensation means each amplifier can operate with a minimum closed-loop gain determined by its internal design rather than requiring an external compensation network in ordinary applications. This characteristic simplifies analog circuit implementation, although the closed-loop gain, output swing, stability, and supply headroom still require verification against the operating conditions of the final circuit.

Typical uses for the LM2904ITPX/NOPB include industrial sensor conditioning, instrumentation, low-frequency active filtering, analog signal buffering, and general-purpose dual-amplifier circuits. The 26 V maximum supply rating is useful for industrial and automotive-adjacent designs that operate above conventional 5 V analog rails, provided the applied voltage remains within the device rating and suitable input and output common-mode conditions are maintained.

For PCB design, place decoupling capacitors close to the supply and ground connections, preserve the package footprint and pin assignments, and verify thermal performance when both channels operate continuously. Decoupling and stability depend on the source impedance, load, feedback network, and supply arrangement, so prototype the final filter or amplifier configuration before high-volume production.

This product page combines the exact-orderable MPN, electrical attributes, package information, application guidance, and practical design considerations. It also distinguishes documented drop-in alternatives from functional equivalents that require different footprints, helping engineers avoid substitutions that cannot be mounted safely on the original PCB land pattern.

直接替換替代品,適用於 LM2904ITPX/NOPB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

LM2904ITP/NOPB

✅ 直接替換
Texas Instruments
📦 8-DSBGA
General Purpose · 2 circuits · 26 V · 700 kHz · 1 MHz · 0.1 V/us · 8-DSBGA · Tape & Reel

聯絡詢價

查看資料表 →

LM2904ITPX/NOPB 最大額定值與電氣特性

Amplifier Type General Purpose
Number of Amplifier Circuits 2
Architecture Two independent, internally frequency-compensated operational amplifiers
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Slew Rate 0.1 V/µs
Supply Configuration Single supply
工作溫度範圍 -40°C to 85°C
封裝 8-DSBGA (8-UFBGA)
安裝類型 Surface mount
Packaging Type Tape and reel
Frequency Compensation Internal

LM2904ITPX/NOPB 8-dsbga (8-ufbga) 腳位配置指南

LM2904ITPX/NOPB(8-dsbga (8-ufbga) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

LM2904ITPX/NOPB 的 8-dsbga (8-ufbga) 封裝腳位圖

無詳細腳位定義資料: LM2904ITPX/NOPB.

請參閱 資料表 以查看完整腳位配置。

典型應用

LM2904ITPX/NOPB 適用於 6 應用s: Industrial Sensor Signal Conditioning, Precision Low-Frequency Analog Filtering, General-Purpose Dual Amplifier Stage, Test and Measurement Front Ends, Audio and Communication Signal Buffering, Battery-Powered Monitoring Equipment.

🏭

Industrial Sensor Signal Conditioning

The LM2904ITPX/NOPB can provide gain and buffering for low-bandwidth industrial sensor signals when the circuit operates within the amplifier’s 26 V maximum supply rating. Its two independent channels allow one stage to amplify or condition a sensor output while the second handles a reference, monitor, or auxiliary signal. The 700 kHz gain-bandwidth product is appropriate for many slow sensor and control signals, but the design must verify input common-mode range, output swing, noise, and grounding. A compact 8-DSBGA footprint also helps reduce board area in multi-channel industrial equipment.

🔧

Precision Low-Frequency Analog Filtering

The two internally frequency-compensated amplifiers in the LM2904ITPX/NOPB can implement active low-pass, high-pass, or band-pass sections in instrumentation and control systems. A 700 kHz gain-bandwidth product provides useful closed-loop bandwidth when the filter operates well below the unity-gain frequency, while the 0.1 V/µs slew rate helps define large-signal response. Component tolerances and the op amp’s offset and bias behavior should be included in the filter-error budget. The 8-DSBGA package helps minimize parasitic effects when feedback and compensation components are placed close to the device.

⚡

General-Purpose Dual Amplifier Stage

Two amplifier channels in one LM2904ITPX/NOPB package can reduce package count in circuits that need signal amplification, buffering, or active feedback. Common arrangements use one channel as a forward amplifier and the other as an inverter, gain stage, or comparator-like function. The device’s single-supply operation and internally compensated architecture simplify common analog designs, although each channel still requires its own stable feedback network. The 26 V maximum supply rating supports higher-voltage circuitry than a 5 V-only device, subject to the limits of the selected operating region.

🖥️

Test and Measurement Front Ends

The LM2904ITPX/NOPB is appropriate for buffering and modest amplification within low-frequency test and measurement equipment. Its two channels can process related input channels, support differential measurement architectures, or separate sensing from drive functions. The 700 kHz gain-bandwidth product supports measurements whose useful bandwidth is substantially lower, and the 0.1 V/µs slew rate constrains large-signal accuracy for faster waveforms. Layout should minimize input-node capacitance, maintain short feedback paths, and provide local supply bypassing for stable, repeatable measurements.

🌐

Audio and Communication Signal Buffering

The LM2904ITPX/NOPB can buffer or amplify low-frequency audio and communication signals when the required bandwidth and output swing are modest. The dual configuration permits one channel to serve an input amplifier while the other handles gain or an auxiliary signal path. The 700 kHz gain-bandwidth product covers many voice-band and control-signal tasks, but it is not intended for high-fidelity wideband audio performance beyond the application’s requirements. Output loading, rail-to-rail headroom, distortion, and stability into the next stage should be checked before final selection.

📱

Battery-Powered Monitoring Equipment

In portable monitoring equipment, the LM2904ITPX/NOPB can support low-frequency sensing and control functions from a single supply. Its internally frequency-compensated dual channels simplify common signal-conditioning layouts, while the 26 V maximum supply rating provides flexibility for industrial battery systems that operate above 5 V. The exact operating current must be checked from the manufacturer datasheet against the available energy budget. Low-leakage design, battery protection, startup behavior, and the 8-DSBGA assembly process remain system-level considerations for a reliable production design.

What is the LM2904ITPX/NOPB?
The LM2904ITPX/NOPB is a Texas Instruments dual, general-purpose operational amplifier containing two independent, internally frequency-compensated amplifier circuits. According to the Texas Instruments product page, it is rated for a maximum supply voltage of 26 V and has a gain-bandwidth product of 700 kHz. The exact-orderable device is packaged in an 8-DSBGA surface-mount package for compact analog signal-processing designs.
What are the key specifications of LM2904ITPX/NOPB that engineers should know?
The key LM2904ITPX/NOPB specifications include two amplifier circuits, a 26 V maximum supply voltage, a 700 kHz gain-bandwidth product, and a 0.1 V/µs slew rate. According to Texas Instruments and exact-MPN listing information, the device uses internal frequency compensation, operates from -40°C to 85°C, and is supplied in an 8-DSBGA package with tape-and-reel packaging.
How do I download the LM2904ITPX/NOPB datasheet PDF?
The official LM2904 documentation is available through the Texas Instruments LM2904 product page at https://www.ti.com/product/LM2904. From that page, open the device documentation or datasheet link for the LM2904 family and select the ordering-table entry corresponding to LM2904ITPX/NOPB. This manufacturer-hosted route is preferable to third-party copies because it provides the current family datasheet, package drawings, and ordering information.
Where can I find the LM2904ITPX/NOPB pinout?
Use the pin-configuration and package-drawing sections of the Texas Instruments LM2904 manufacturer datasheet to confirm LM2904ITPX/NOPB pin assignments. The exact MPN is identified as an 8-DSBGA device, and a 1.6 mm pitch 8-UFBGA package is stated in the exact-part listing. Because no verified pin-description table appears in the source material for this page, use the manufacturer drawing rather than assigning BGA ball functions from a generic SOIC package.
What can replace the LM2904ITPX/NOPB?
A valid replacement must use the same 8-DSBGA footprint and provide pin-to-pin-compatible amplifier functions. The LM2904 family includes related ordering options, but a change in package suffix, tape format, or family revision must be checked against the original PCB. The LM2904ITP/NOPB comparison identifies a closely related ordering option, while the TI comparison tool lists LM2904, LM2904B, and LM2904LV families for further engineering review.
Is LM2904ITPX/NOPB pin-compatible with LM2904ITP/NOPB?
The two MPNs share the ITP package designation, but the X suffix also carries ordering and packing significance. A literal drop-in conclusion therefore requires confirmation that the land pattern, ball assignments, and mechanical drawing are identical. For PCB reuse, compare the manufacturer ordering table and package drawings for both exact MPNs, then verify electrical requirements such as supply voltage, stability, common-mode range, output swing, and temperature grade.
What is the difference between LM2904 and LM2904B?
The LM2904 and LM2904B are related dual general-purpose operational-amplifier families, but they should not be treated as automatically interchangeable without checking the ordering table and electrical limits. Texas Instruments lists LM2904, LM2904B, and LM2904LV in its alternate-product comparison tool. The target LM2904ITPX/NOPB has a 700 kHz gain-bandwidth product and 26 V maximum supply rating, so those values must be reconciled with each candidate before replacement.
When should I choose LM2904ITPX/NOPB over another LM2904 option?
Choose LM2904ITPX/NOPB when the PCB specifically requires the 8-DSBGA footprint, the tape-and-reel ordering format, and the documented 700 kHz gain-bandwidth product. A SOIC or larger-package option may be easier to prototype by hand, while another package can require a new PCB layout. If a proposed alternative does not preserve the BGA ball pattern, it is not a drop-in replacement regardless of its amplifier performance.
Is LM2904ITPX/NOPB suitable for industrial instrumentation?
The LM2904ITPX/NOPB is suitable for many low-frequency instrumentation and signal-conditioning circuits because it offers two independent amplifier channels, a 26 V maximum supply rating, and internal frequency compensation. Its 700 kHz gain-bandwidth product suits moderate-bandwidth functions rather than demanding high-speed signal paths. The -40°C to 85°C temperature range must also be checked against the enclosure temperature and production environmental requirements.
Where can I buy LM2904ITPX/NOPB online?
Use the Request a Quote form on this page to request LM2904ITPX/NOPB pricing, current availability, lot information, and lead time. The request should include the exact MPN LM2904ITPX/NOPB and the required reel quantity. This ensures that the inquiry is handled as the 8-DSBGA tape-and-reel order variant rather than being confused with LM2904 variants in SOIC, plastic DIP, or other package configurations.
What is the price of LM2904ITPX/NOPB?
Current pricing for the exact LM2904ITPX/NOPB tape-and-reel configuration should be requested through the Request a Quote form on this page. Pricing can vary with order quantity, inventory, date code, and packaging configuration, so a generic LM2904 family price may not represent this orderable MPN. Include the required reel quantity and any traceability or lot-control requirements when submitting the request.
What is the lead time and stock status of LM2904ITPX/NOPB?
Current stock and lead time for LM2904ITPX/NOPB should be confirmed through the Request a Quote form on this page. The exact MPN is offered in an 8-DSBGA tape-and-reel configuration, and package-specific inventory can differ from other LM2904 order codes. Provide your required quantity, target date, and acceptable date-code policy so the quotation can reflect the correct configuration.
Is LM2904ITPX/NOPB in stock?
Submit an LM2904ITPX/NOPB request through the Request a Quote form to obtain a current stock confirmation for the 8-DSBGA tape-and-reel configuration. Stock status can change with incoming supply and customer demand, and listings for the broader LM2904 family do not establish availability for every suffix. The inquiry should state the required reel quantity and whether a factory-sealed date code is required.
How much bandwidth does LM2904ITPX/NOPB provide?
The LM2904ITPX/NOPB has a gain-bandwidth product of 700 kHz according to the Texas Instruments product page. An exact-MPN listing also gives a slew rate of 0.1 V/µs, which determines how quickly the output can follow a changing input. Actual closed-loop bandwidth depends on the selected feedback network, noise gain, source impedance, load, and available output voltage swing.
Does LM2904ITPX/NOPB meet RoHS and REACH requirements?
RoHS and REACH status must be confirmed from the current Texas Instruments product and material-compliance documentation for the exact ordering code. The accessible manufacturer product information identifies the device and its family but does not provide a complete, exact-MPN compliance declaration in the material shown here. Use the manufacturer compliance information or a Request a Quote for documentation before treating the device as compliant for a particular procurement program.

工程參考資料,適用於 LM2904ITPX/NOPB — 比較、設計指引及合規資訊。

選型指南

Select LM2904ITPX/NOPB when the design requires two general-purpose amplifier channels in the exact 8-DSBGA footprint and can operate within the documented 26 V maximum supply rating, 700 kHz gain-bandwidth product, and -40°C to 85°C temperature range. It is particularly useful for low-frequency industrial instrumentation, buffering, active filtering, and general analog signal conditioning where internal frequency compensation reduces circuit complexity. A larger-lead package may be easier for manual prototyping, while another surface-mount family may offer different bandwidth or common-mode performance. Such options are not automatically drop-in replacements because the footprint and pin assignments may differ. For an existing PCB, verify the exact package drawing, ball map, supply requirements, stability, and output swing before approving any substitution. If the original design has been proven with LM2904ITPX/NOPB, retaining the exact MPN is the lowest-risk choice; if redesign is possible, evaluate alternatives by the required bandwidth, supply voltage, common-mode range, noise, offset, and environmental grade rather than family name alone.

與替代品比較

參數 本產品
Package 8-DSBGA (8-UFBGA)
Brand Texas Instruments
Amplifier Circuits 2
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Slew Rate 0.1 V/µs
Operating Temperature -40°C to 85°C
Frequency Compensation Internal

設計說明

Place the supply-bypass capacitor and ground-return connection immediately adjacent to the corresponding LM2904ITPX/NOPB package pins. Keep each feedback loop compact and route output and inverting-input traces away from high-impedance inputs. Because this is an 8-DSBGA device, inspect the manufacturer land pattern carefully and verify ball assignments against the exact ordering code before fabrication.

Do not treat every LM2904 family member as a footprint-compatible substitute. Confirm the exact package, ball pattern, pin functions, electrical ratings, and stability requirements before replacing LM2904ITPX/NOPB. A SOIC or other BGA variant can offer similar amplifier functionality while still requiring a PCB change. Also account for the 26 V maximum supply rating rather than using it as an operating target.

Evaluate each closed-loop configuration for stability using the actual source impedance, feedback values, load, and supply configuration. The internal frequency compensation simplifies typical uses, but high noise gain, capacitive loading, or unsuitable feedback networks can affect operation. For signal paths near the 700 kHz gain-bandwidth product, include slew rate and output-swing requirements in the timing and amplitude budget.

Estimate dissipation from the actual supply voltage, output voltage, quiescent current, and load current, then compare the resulting junction-temperature margin with the -40°C to 85°C device rating. The 8-DSBGA package has limited exposed thermal area compared with larger leaded packages, so copper placement, nearby heat sources, and ambient temperature can materially affect reliability. Use manufacturer thermal data for final calculations.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The accessible exact-part information does not include a complete material-compliance declaration. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Texas Instruments for the exact orderable MPN.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LM2904ITPX/NOPB datasheet LM2904ITPX/NOPB pinout LM2904ITPX/NOPB datasheet pdf LM2904ITPX/NOPB equivalent LM2904ITPX/NOPB replacement LM2904ITPX/NOPB cross reference LM2904ITPX/NOPB price LM2904ITPX/NOPB stock Texas Instruments LM2904ITPX/NOPB LM2904ITPX/NOPB 8-DSBGA LM2904ITPX/NOPB application circuit LM2904ITPX/NOPB vs LM2904ITP/NOPB

相關元件與詞彙

Texas Instruments LM2904 LM2904ITPX/NOPB LM2904ITP/NOPB LM2904B LM2904LV operational amplifier op amp dual amplifier general-purpose amplifier analog integrated circuit signal conditioning active filter instrumentation amplifier circuit gain-bandwidth product GBW slew rate internally frequency-compensated amplifier single-supply operation negative feedback 8-DSBGA 8-UFBGA surface-mount package tape-and-reel packaging
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情