LM2904ITPX/NOPB - Dual 26V, 700kHz Op Amp | Texas Instruments
MPN: LM2904ITPX/NOPB ✓ ActiveLM2904ITPX/NOPB Overview
An operational amplifier, commonly called an op amp, is an analog integrated circuit that amplifies the voltage difference between its differential inputs. Its high open-loop gain, negative feedback operation, and internal frequency compensation make it useful for signal conditioning, comparison, filtering, and instrumentation. The LM2904 contains two amplifier channels in one package, allowing one IC to serve two related analog functions.
The LM2904ITPX/NOPB provides two amplifier circuits in a compact 8-DSBGA package. Texas Instruments describes the device as a low-power dual operational amplifier with a 700 kHz gain-bandwidth product. A listing for the exact MPN also identifies a 0.1 V/µs slew rate, surface-mount construction, and a -40°C to 85°C temperature range. Tape-and-reel packaging supports automated assembly and high-volume production.
Internally frequency compensation means each amplifier can operate with a minimum closed-loop gain determined by its internal design rather than requiring an external compensation network in ordinary applications. This characteristic simplifies analog circuit implementation, although the closed-loop gain, output swing, stability, and supply headroom still require verification against the operating conditions of the final circuit.
Typical uses for the LM2904ITPX/NOPB include industrial sensor conditioning, instrumentation, low-frequency active filtering, analog signal buffering, and general-purpose dual-amplifier circuits. The 26 V maximum supply rating is useful for industrial and automotive-adjacent designs that operate above conventional 5 V analog rails, provided the applied voltage remains within the device rating and suitable input and output common-mode conditions are maintained.
For PCB design, place decoupling capacitors close to the supply and ground connections, preserve the package footprint and pin assignments, and verify thermal performance when both channels operate continuously. Decoupling and stability depend on the source impedance, load, feedback network, and supply arrangement, so prototype the final filter or amplifier configuration before high-volume production.
This product page combines the exact-orderable MPN, electrical attributes, package information, application guidance, and practical design considerations. It also distinguishes documented drop-in alternatives from functional equivalents that require different footprints, helping engineers avoid substitutions that cannot be mounted safely on the original PCB land pattern.
Drop-in alternatives for LM2904ITPX/NOPB — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
LM2904ITP/NOPB
✅ Drop-InContact for price
View Datasheet →LM2904ITPX/NOPB Maximum Ratings & Electrical Characteristics
| Amplifier Type | General Purpose |
| Number of Amplifier Circuits | 2 |
| Architecture | Two independent, internally frequency-compensated operational amplifiers |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 700 kHz |
| Slew Rate | 0.1 V/µs |
| Supply Configuration | Single supply |
| Operating Temperature Range | -40°C to 85°C |
| Package | 8-DSBGA (8-UFBGA) |
| Mounting Type | Surface mount |
| Packaging Type | Tape and reel |
| Frequency Compensation | Internal |
LM2904ITPX/NOPB 8-dsbga (8-ufbga) Pin Configuration Guide
Pin configuration for LM2904ITPX/NOPB (8-dsbga (8-ufbga) package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.
No detailed pinout data available for LM2904ITPX/NOPB.
Refer to the datasheet for full pin configuration.
Typical Applications
LM2904ITPX/NOPB is suitable for 6 applications: Industrial Sensor Signal Conditioning, Precision Low-Frequency Analog Filtering, General-Purpose Dual Amplifier Stage, Test and Measurement Front Ends, Audio and Communication Signal Buffering, Battery-Powered Monitoring Equipment.
Industrial Sensor Signal Conditioning
The LM2904ITPX/NOPB can provide gain and buffering for low-bandwidth industrial sensor signals when the circuit operates within the amplifier’s 26 V maximum supply rating. Its two independent channels allow one stage to amplify or condition a sensor output while the second handles a reference, monitor, or auxiliary signal. The 700 kHz gain-bandwidth product is appropriate for many slow sensor and control signals, but the design must verify input common-mode range, output swing, noise, and grounding. A compact 8-DSBGA footprint also helps reduce board area in multi-channel industrial equipment.
Precision Low-Frequency Analog Filtering
The two internally frequency-compensated amplifiers in the LM2904ITPX/NOPB can implement active low-pass, high-pass, or band-pass sections in instrumentation and control systems. A 700 kHz gain-bandwidth product provides useful closed-loop bandwidth when the filter operates well below the unity-gain frequency, while the 0.1 V/µs slew rate helps define large-signal response. Component tolerances and the op amp’s offset and bias behavior should be included in the filter-error budget. The 8-DSBGA package helps minimize parasitic effects when feedback and compensation components are placed close to the device.
General-Purpose Dual Amplifier Stage
Two amplifier channels in one LM2904ITPX/NOPB package can reduce package count in circuits that need signal amplification, buffering, or active feedback. Common arrangements use one channel as a forward amplifier and the other as an inverter, gain stage, or comparator-like function. The device’s single-supply operation and internally compensated architecture simplify common analog designs, although each channel still requires its own stable feedback network. The 26 V maximum supply rating supports higher-voltage circuitry than a 5 V-only device, subject to the limits of the selected operating region.
Test and Measurement Front Ends
The LM2904ITPX/NOPB is appropriate for buffering and modest amplification within low-frequency test and measurement equipment. Its two channels can process related input channels, support differential measurement architectures, or separate sensing from drive functions. The 700 kHz gain-bandwidth product supports measurements whose useful bandwidth is substantially lower, and the 0.1 V/µs slew rate constrains large-signal accuracy for faster waveforms. Layout should minimize input-node capacitance, maintain short feedback paths, and provide local supply bypassing for stable, repeatable measurements.
Audio and Communication Signal Buffering
The LM2904ITPX/NOPB can buffer or amplify low-frequency audio and communication signals when the required bandwidth and output swing are modest. The dual configuration permits one channel to serve an input amplifier while the other handles gain or an auxiliary signal path. The 700 kHz gain-bandwidth product covers many voice-band and control-signal tasks, but it is not intended for high-fidelity wideband audio performance beyond the application’s requirements. Output loading, rail-to-rail headroom, distortion, and stability into the next stage should be checked before final selection.
Battery-Powered Monitoring Equipment
In portable monitoring equipment, the LM2904ITPX/NOPB can support low-frequency sensing and control functions from a single supply. Its internally frequency-compensated dual channels simplify common signal-conditioning layouts, while the 26 V maximum supply rating provides flexibility for industrial battery systems that operate above 5 V. The exact operating current must be checked from the manufacturer datasheet against the available energy budget. Low-leakage design, battery protection, startup behavior, and the 8-DSBGA assembly process remain system-level considerations for a reliable production design.
Engineering reference data for LM2904ITPX/NOPB — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Package | 8-DSBGA (8-UFBGA) |
| Brand | Texas Instruments |
| Amplifier Circuits | 2 |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 700 kHz |
| Slew Rate | 0.1 V/µs |
| Operating Temperature | -40°C to 85°C |
| Frequency Compensation | Internal |
Design Notes
Place the supply-bypass capacitor and ground-return connection immediately adjacent to the corresponding LM2904ITPX/NOPB package pins. Keep each feedback loop compact and route output and inverting-input traces away from high-impedance inputs. Because this is an 8-DSBGA device, inspect the manufacturer land pattern carefully and verify ball assignments against the exact ordering code before fabrication.
Do not treat every LM2904 family member as a footprint-compatible substitute. Confirm the exact package, ball pattern, pin functions, electrical ratings, and stability requirements before replacing LM2904ITPX/NOPB. A SOIC or other BGA variant can offer similar amplifier functionality while still requiring a PCB change. Also account for the 26 V maximum supply rating rather than using it as an operating target.
Evaluate each closed-loop configuration for stability using the actual source impedance, feedback values, load, and supply configuration. The internal frequency compensation simplifies typical uses, but high noise gain, capacitive loading, or unsuitable feedback networks can affect operation. For signal paths near the 700 kHz gain-bandwidth product, include slew rate and output-swing requirements in the timing and amplitude budget.
Estimate dissipation from the actual supply voltage, output voltage, quiescent current, and load current, then compare the resulting junction-temperature margin with the -40°C to 85°C device rating. The 8-DSBGA package has limited exposed thermal area compared with larger leaded packages, so copper placement, nearby heat sources, and ambient temperature can materially affect reliability. Use manufacturer thermal data for final calculations.
Compliance Information
The accessible exact-part information does not include a complete material-compliance declaration. Confirm current RoHS, REACH, lead-free, halogen-free, and conflict-minerals documentation with Texas Instruments for the exact orderable MPN.