onsemi

LM2904NG - Dual Op Amp, 1MHz, 3-26V, PDIP-8 | onsemi

MPN: LM2904NG ✓ 啟用中
3 V to 26 V Vdss PDIP-8 (0.300 in, 7.62 mm) Package Internal Speed
MOQ: 1 |

LM2904NG 概覽

The onsemi LM2904NG is a general-purpose dual operational amplifier consisting of two independent, internally frequency-compensated op amps in a 400 mil 8-pin PDIP (0.300 in / 7.62 mm row spacing) package. It operates from a single supply of 3V to 26V or from dual supplies, delivers a gain bandwidth product of 1 MHz and a slew rate of 0.6 V/µs, and is rated for operation from -40C to +105C.

An operational amplifier (op amp) is a high-gain voltage amplifier with differential inputs and a single-ended output that, together with resistors or capacitors in a feedback network, implements amplification, filtering, comparison, buffering and mathematical functions. The op amp sits at the core of the analog signal-chain hierarchy: amplifier IC -> analog front end -> mixed-signal system. The LM2904 family is the industry-standard dual op amp lineage originally popularized by National Semiconductor and carried forward by multiple manufacturers, including onsemi and Texas Instruments.

Key features include a common-mode input voltage range that extends to ground/VEE, enabling the device to sense signals near 0V in single-supply systems, low power drain, and internal frequency compensation that eliminates external compensation components. Single-supply or split-supply operation gives designers flexibility across battery-powered and industrial 24V-class rails. The through-hole PDIP package suits prototyping, repair, education and legacy industrial boards.

Architecturally, the LM2904NG uses circuit designs perfected for quad operational amplifiers, packaged as two channels sharing one bias network. Internally compensated pole-splitting keeps the device unity-gain stable without external capacitors, while the class-AB output stage sources and sinks modest load currents. Care is required when sinking current near ground with a single supply, since the output sinks through the ground return path and low-side saturation behavior limits accuracy near 0V on the output swing.

Typical applications include transducer amplifiers and sensor front ends, DC gain blocks and active filters, and conventional op amp circuits in industrial control, automotive-adjacent electronics and instrumentation where the -40C to +105C ambient range and ground-sensing inputs are required.

Design consideration: in single-supply configurations, bias inputs above the input common-mode floor and avoid driving the output into deep saturation, because recovery from output saturation introduces overshoot and gain errors; decouple the supply pin with 0.1uF close to pin 8.

This page synthesizes distributor availability, drop-in alternatives and practical design guidance not found in the manufacturer datasheet, giving engineers a single decision-ready reference.

直接替換替代品,適用於 LM2904NG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LM2904NG (相同外形與佔位) — 差異在於 Package, Mounting Type, Slew Rate, Amplifier Type, Input Bias Current.

onsemi
Package: 8-PDIP (DIP-8)
Amplifier Type: Standard (General Purpose)
比較對象 LM2904NG →
Texas Instruments
Package: SOIC-8 (D)
Mounting Type: Surface Mount
Slew Rate: 0.5 V/us (typical)
比較對象 LM2904NG →
Texas Instruments
Package: 8-pin PDIP
Mounting Type: Through-hole
比較對象 LM2904NG →
onsemi
Package: 8-PDIP (0.300 in, 7.62 mm)
Slew Rate: 0.6 V/us
Amplifier Type: General Purpose / Instrumentation, Op Amp, Buffer
比較對象 LM2904NG →
onsemi
Mounting Type: Through-hole
Input Bias Current: 100 nA
比較對象 LM2904NG →

LM2904N

✅ 直接替換
Texas Instruments
📦 PDIP-8 (0.300 in, 7.62 mm)
2 amplifiers · 26 V · 1 MHz · Dual independent operational amplifiers · Internally frequency compensated · Single supply or split supply · Extending to ground/VEE

聯絡詢價

查看資料表 →

LM2904BIDR

✅ 直接替換
Texas Instruments
📦 PDIP-8 (0.300 in, 7.62 mm)
Texas Instruments · Industry-standard dual operational amplifier · 2 (Dual) · 3 V to 36 V · +/-1.5 V to +/-18 V · 1.2 MHz · 0.5 V/us (typical) · 0.5 mV typical / 3 mV maximum

聯絡詢價

查看資料表 →

LM2904-N

✅ 直接替換
📦 PDIP-8 (0.300 in, 7.62 mm)
TI LM2904-N is a dual 26V, 1 MHz op amp; identical pinout, legacy -N suffix naming

📋 參考替代品(不在目錄中)

LM2904VN

✅ 直接替換
onsemi
📦 PDIP-8 (0.300 in, 7.62 mm)
General Purpose / Instrumentation, Op Amp, Buffer · 2 · 1 MHz · 0.6 V/us · 3 V to 26 V · 3 V to 32 V · +/-1.5 V to +/-16 V

聯絡詢價

查看資料表 →

LM358NG

✅ 直接替換
onsemi
📦 PDIP-8 (0.300 in, 7.62 mm)
Dual general-purpose operational amplifier · 2 channels · 3 V to 32 V · 1 MHz · 0.6 V/µs · 7 mV · 100 nA · Extends to ground/VEE

聯絡詢價

查看資料表 →

LM2904NG 最大額定值與電氣特性

Amplifier Type General Purpose
Number of Circuits 2
Gain Bandwidth Product 1 MHz
Slew Rate 0.6 V/µs
Supply Voltage Range 3 V to 26 V
工作溫度 -40C to +105C
封裝 / 外殼 PDIP-8 (0.300 in, 7.62 mm)
安裝類型 Through Hole
Packaging Tube
Input Common-Mode Range Extends to ground/VEE
Supply Type Single supply or split supply
Frequency Compensation Internal

LM2904NG 腳位配置

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
腳位 1 OUT1 — Output of amplifier A
腳位 2 IN1- — Inverting input of amplifier A
腳位 3 IN1+ — Non-inverting input of amplifier A
腳位 4 GND/V- — Ground or negative supply
腳位 5 IN2+ — Non-inverting input of amplifier B
腳位 6 IN2- — Inverting input of amplifier B
腳位 7 OUT2 — Output of amplifier B
腳位 8 VCC/V+ — Positive power supply

典型應用

LM2904NG 適用於 6 應用s: Single-Supply Sensor Amplification, DC Gain Blocks and Active Filters, Comparators and Threshold Detectors, Industrial Control and Automation, Automotive-Adjacent Electronics, Audio Signal Conditioning.

🏭

Single-Supply Sensor Amplification

The LM2904NG is a natural fit for amplifying signals from transducers such as photodiodes, strain-gauge bridges, thermistors and pressure sensors that are referenced to ground in single-supply industrial systems. Its common-mode input range extending to ground/VEE allows the non-inverting input to sit at 0V without phase reversal, which many op amps cannot tolerate. With a 3V to 26V supply range, the same design scales from 5V logic-adjacent rails to industrial 24V systems. The 1 MHz gain bandwidth supports closed-loop gains of 100 or less at low frequencies with margin. For outputs that must approach 0V while sinking current, add a resistor to ground because the output sink path returns through the ground pin.

🔧

DC Gain Blocks and Active Filters

As an internally compensated, unity-gain-stable dual amplifier, the LM2904NG implements DC gain stages, Sallen-Key filters, integrators and summing amplifiers without external compensation components. In industrial control boards, setpoint scaling and 4-20 mA loop conditioning, its 1 MHz GBW covers low-pass filter corner frequencies up to tens of kilohertz with predictable phase behavior, and the 0.6 V/µs slew rate is ample for slow analog control signals. The dual channels let one package handle both the filter stage and the output scaling stage, halving board area versus single-amplifier solutions. In split-supply operation the device handles bipolar signals directly; in single-supply designs, bias the virtual ground above the input floor and avoid driving the output into saturation to prevent recovery overshoot.

⚡

Comparators and Threshold Detectors

One LM2904NG channel commonly serves as a level detector or window comparator in industrial monitoring: the open-loop stage compares a sensor-derived voltage against a resistor-divider threshold, driving a logic or LED indication. Because the input common-mode range includes ground, thresholds near 0V are detected reliably from a single supply. The -40C to +105C rating keeps detection levels stable across outdoor and cabinet-mounted equipment temperatures. A design consideration is that the LM2904 is a compensated amplifier, not a dedicated comparator, so response times are in the microsecond range and the output does not provide clean open-collector logic; add hysteresis with positive feedback and follow with a transistor stage when driving relays or logic inputs, or use a dedicated comparator family for sub-microsecond response.

⚙️

Industrial Control and Automation

Factory automation, motor control supervision and PLC analog I/O modules routinely embed the LM2904 family because it tolerates 24V-class supply environments (26V maximum), survives -40C to +105C ambient and is second-sourced industry-wide, simplifying long-term procurement. Typical roles include transducer signal conditioning ahead of an ADC, current-sense amplification across shunt resistors, and buffer stages between DAC outputs and actuator drive circuits. Its low power drain matters in densely packed I/O cards. Designers should decouple the supply pin with 0.1uF close to pin 8, route ground returns away from high-current motor drive paths to protect the ground-sensing input accuracy, and exploit the dual channels to separate noisy and clean halves of the analog front end.

🚗

Automotive-Adjacent Electronics

The LM2904 family was originally specified for automotive-grade environments, and the -40C to +105C range of the LM2904NG covers under-hood-adjacent modules, body electronics and instrument clusters where cold crank and elevated cabin temperatures occur. Its single-supply ground-sensing inputs condition signals from potentiometer position sensors, coolant temperature dividers and battery-voltage monitors, while the 26V rating absorbs load-dump-adjacent transients when paired with upstream protection. Through-hole PDIP packaging suits serviceable automotive test fixtures and legacy modules. For genuinely AEC-Q100-qualified new designs, verify the specific variant's qualification level in the onsemi product documentation, since packaging suffixes determine qualification; the electrical core, however, has decades of proven automotive field history across the industry-standard LM2904 lineage.

🎧

Audio Signal Conditioning

The LM2904NG serves in low-fidelity and utility audio paths: microphone preamplifiers for intercoms, line-level summing, active tone controls and audio level detection in industrial PA and security systems. Its 1 MHz GBW supports closed-loop gains up to roughly 100 across most of the audio band, and the 0.6 V/µs slew rate handles full-amplitude audio up to the upper tens of kilohertz without gross slew distortion. Operation from a single supply simplifies intercom and alarm-panel power design, with the input biased at mid-supply through a divider. The device is not intended for high-end audio - its noise and distortion figures exceed those of dedicated audio op amps - so for hi-fi signal paths substitute a low-noise audio dual amplifier, but for robust utility audio the LM2904NG's supply tolerance and temperature range are decisive.

What is the supply voltage range of the LM2904NG?
The onsemi LM2904NG operates from a supply voltage of 3V to 26V in single-supply mode, or from equivalent dual supplies such as +/-1.5V to +/-13V. According to the onsemi LM2904NG datasheet, this single-supply capability with a common-mode input range extending to ground/VEE makes it suitable for battery-powered and industrial applications where signals near 0V must be amplified without a negative rail.
What is the gain bandwidth product of LM2904NG?
The LM2904NG has a gain bandwidth product of 1 MHz. According to the onsemi datasheet parameters, the device is internally frequency compensated, so it remains unity-gain stable without external compensation capacitors. This means at a closed-loop gain of 100 (40 dB), the achievable bandwidth is approximately 10 kHz, which is adequate for DC and low-frequency analog signal conditioning, sensor amplification and active filters below audio-band extremes.
What is the slew rate of the LM2904NG?
The LM2904NG provides a slew rate of 0.6 V/µs per the manufacturer specifications. This limits large-signal performance: a 10V peak sine can only follow cleanly up to roughly 19 kHz at full amplitude. For small-signal sensor outputs the slew rate is rarely a limiting factor, but designers switching large output swings or driving fast pulses should verify slew-induced distortion or consider a faster dual op amp alternative.
What package does the LM2904NG come in?
The LM2904NG is housed in an 8-pin PDIP (dual in-line plastic) package with 0.300 inch (7.62 mm) row spacing, and is supplied in tube packaging. This through-hole package is favored for prototyping, breadboarding, education, repair and legacy industrial equipment, since the leads insert directly into standard 0.1 inch perforated boards and IC sockets. Surface-mount equivalents of the same die exist in SOIC-8 and other packages within the LM2904 family.
What is the operating temperature range of LM2904NG?
The LM2904NG is specified for operation from -40C to +105C ambient. This extended industrial temperature range distinguishes the LM2904 prefix from the commercial-grade LM358, which is typically rated to +70C or +85C. According to onsemi product information, this makes the LM2904NG appropriate for industrial control, instrumentation and harsh-environment electronics where cold-start performance and elevated enclosure temperatures must be tolerated without derating.
What is the difference between LM2904NG and LM358NG?
The LM2904NG and LM358NG share the same die architecture, dual-op-amp function and PDIP-8 pinout, but differ in temperature grade: the LM2904NG is rated -40C to +105C while the LM358NG commercial grade is typically limited to +70C to +85C. Comparison listings such as FindIC show the two as close equivalents. For designs that must survive industrial temperature extremes, choose the LM2904NG; for benign commercial environments the LM358NG is usually lower cost.
Can TI LM2904N replace onsemi LM2904NG?
Yes. The Texas Instruments LM2904N in PDIP-8 is a pin-to-pin drop-in replacement for the onsemi LM2904NG: both are dual general-purpose op amps with ground-sensing inputs, single-supply operation to 26V (TI's version is a dual 26V, 700 kHz to 1 MHz class part), and the same 1-OUT, 2-IN1-, 3-IN1+, 4-GND, 5-IN2+, 6-IN2-, 7-OUT2, 8-VCC pinout. Verify the temperature grade and DC specifications in the TI datasheet against your circuit requirements before substituting in precision applications.
What is the best drop-in replacement for LM2904NG?
The best drop-in replacements are other industry-standard LM2904/LM358 dual op amps in PDIP-8, which share the identical pinout and similar electrical specifications. Recommended candidates include TI LM2904N, TI LM2904B (a pin-to-pin upgrade with improved performance per TI's product comparison), and onsemi LM2904VN. All install on the same 8-pin 0.300 inch footprint without PCB changes. Always confirm the operating temperature range and offset voltage specifications in the respective datasheet for your specific circuit.
What is the pinout of LM2904NG in PDIP-8?
The LM2904NG PDIP-8 pinout is: pin 1 = OUT1 (output of amplifier A), pin 2 = IN1- (inverting input A), pin 3 = IN1+ (non-inverting input A), pin 4 = GND/V- (negative supply or ground), pin 5 = IN2+ (non-inverting input B), pin 6 = IN2- (inverting input B), pin 7 = OUT2 (output of amplifier B), pin 8 = VCC/V+ (positive supply). This pinout is identical across the entire industry-standard LM2904/LM358 dual op amp family, which is why these parts are freely interchangeable across manufacturers.
Where can I download the LM2904NG datasheet PDF?
The onsemi LM2904NG datasheet PDF is available from onsemi's official product page and from datasheet aggregators such as alldatasheet.com, which hosts the ONSEMI LM2904NG document. The datasheet covers absolute maximum ratings, electrical characteristics over temperature, typical performance curves and application circuits. Request a quote on this page for current pricing, stock and lead time, and consult the manufacturer datasheet for the authoritative electrical specification table before finalizing your design.
Is the LM2904NG suitable for single-supply operation near 0V?
Yes. The LM2904NG's defining feature is a common-mode input voltage range that extends to ground/VEE, so it can accurately amplify signals whose inputs sit at or very near 0V even when powered only from a single positive supply. Note, however, that the output stage sinks current through the ground connection, so when the output must sink small currents near ground it may sit slightly above 0V. For outputs required to swing fully to 0V under sink load, add a pull-down resistor to ground.
Is LM2904NG the same as LM2904NG onsemi's SOIC version?
The LM2904NG is specifically the PDIP-8 through-hole variant in the onsemi LM2904 family; onsemi offers the same die in surface-mount packages under different suffixes (such as SOIC-8 variants). Electrically the die is the same, but the package suffix determines pin geometry, footprint, thermal performance and reel versus tube packing. A PDIP-8 board cannot accept an SOIC-8 part directly, so match the suffix to your footprint; for through-hole replacement of an existing LM2904NG, order the same NG suffix.
What are the key specifications of LM2904NG that engineers should know?
The onsemi LM2904NG is a dual general-purpose op amp in PDIP-8 with a 1 MHz gain bandwidth product, 0.6 V/µs slew rate, 3V to 26V single-supply range (or split supplies), common-mode input range extending to ground/VEE, internal frequency compensation, -40C to +105C operation, and tube packaging. These parameters define it as the industry-standard low-power dual amplifier for single-supply signal conditioning. Per the manufacturer datasheet, the two channels are independently operated but share a single bias circuit, so both amplifiers must be used within the same supply domain.
Where can I buy LM2904NG and what is the current lead time?
LM2904NG can be ordered through the Request a Quote form on this page, which returns current XAIPART pricing, stock availability and lead time. According to distributor listings such as DigiKey and Mouser, the part is an active onsemi product with established distribution, but quote-first channels confirm real-time figures rather than stale catalog prices. For production volumes, request quotes at your annual usage quantity; the part ships in tube packaging as the standard packing format.
When should I choose LM2904NG over a faster modern dual op amp?
Choose the LM2904NG when your circuit needs DC or low-frequency precision signal conditioning in a through-hole footprint, ground-sensing single-supply inputs, operation to 105C, and the broadest second-source ecosystem in the industry. Do not choose it when you need bandwidth beyond a few hundred kilohertz, rail-to-rail output swing, low offset voltage for precision front ends, or low supply current for battery life - then a modern rail-to-rail CMOS dual op amp is the better class of part. The LM2904NG's advantage is proven availability, interchangeable cross-brand equivalents and decades of field history in industrial designs.

工程參考資料,適用於 LM2904NG — 比較、設計指引及合規資訊。

選型指南

Choose the onsemi LM2904NG when you need the industry-standard dual op amp in through-hole PDIP-8 for industrial-temperature (-40C to +105C) single-supply signal conditioning with ground-sensing inputs and a 26V supply ceiling. Choose TI LM2904N or LM2904-N when your supply chain prefers Texas Instruments - they are pin-to-pin equivalents on the same footprint. Choose TI LM2904B when you want a pin-compatible upgrade with improved offset and robustness for new precision designs. Choose onsemi LM2904VN when an extended or V-suffix grading is required by your quality system. Choose LM358NG only for benign commercial environments where the narrower temperature range is acceptable and cost matters most. Avoid this entire family for rail-to-rail output requirements, sub-microsecond comparator response, or precision applications needing sub-millivolt offset - select a modern rail-to-rail or precision CMOS dual op amp instead.

與替代品比較

參數 本產品 LM2904N LM2904B LM2904-N LM2904VN LM358NG
Package PDIP-8 (0.300 in, 7.62 mm) PDIP-8 (0.300 in, 7.62 mm) - same PDIP-8 (0.300 in, 7.62 mm) - same PDIP-8 (0.300 in, 7.62 mm) - same PDIP-8 (0.300 in, 7.62 mm) - same PDIP-8 (0.300 in, 7.62 mm) - same
Brand onsemi Texas Instruments Texas Instruments Texas Instruments onsemi onsemi
Number of Circuits 2 2 2 2 2 2
Supply Voltage Range 3 V to 26 V 3 V to 26 V class 3 V to 26 V class 3 V to 26 V class 3 V to 26 V class 3 V to 32 V class
Operating Temperature -40C to +105C -40C to +105C class -40C to +125C class -40C to +105C class -40C to +105C class 0C to +70C/+85C class
Temperature Grade Distinction Industrial (LM2904 prefix) Industrial (LM2904 prefix) Industrial enhanced (LM2904B) Industrial (LM2904 prefix) Industrial/extended V grade Commercial (LM358 prefix)
Mounting Type Through Hole Through Hole Through Hole (PDIP option) Through Hole Through Hole Through Hole

主要差異化特點

  • Industrial temperature grade for harsh environments (對比LM358NG)
  • Industry-standard pinout with broadest second sourcing (對比LM2904B)
  • Ground-sensing inputs in single-supply designs (對比LM2904N)

設計說明

Do not assume the LM2904NG output swings to 0V under load. The output sinks current through the ground pin, so a low-side load (for example an LED or resistor returned to ground) holds the output tens to hundreds of millivolts above ground. If a stage must produce a true 0V output, return the sinking load to a small negative rail or add a pull-down resistor so the amplifier sources rather than sinks. Also avoid input voltages more than one diode drop below V-; although the input common-mode range includes ground, excessive negative differential input can cause phase inversion of the output.

Decouple the VCC pin (pin 8) with a 0.1uF ceramic capacitor placed within a few millimeters of the pin, particularly in single-supply 24V industrial environments where supply transients from relays and switching loads propagate on shared rails. Keep the input traces (pins 2, 3, 5, 6) short and guard high-impedance nodes with ground pour to limit leakage and pickup. Because this is a through-hole PDIP part, use an IC socket for serviceable industrial assemblies, but note that socket contact resistance adds negligible error only for closed-loop gains where feedback resistor values exceed roughly 10 kohm.

Respect the small-signal and large-signal limits separately: with a 1 MHz gain bandwidth product, a closed-loop gain of 100 yields only about 10 kHz of bandwidth, and the 0.6 V/µs slew rate limits a 10V-peak sine to roughly 19 kHz before slew distortion appears. Estimate the required slew rate as 2*pi*f*Vpeak and verify it stays below 0.6 V/µs. For filter designs, keep the closed-loop bandwidth at least 20x above the filter corner frequency so phase shift of the amplifier itself does not alter the transfer function. These are standard first-order estimates; confirm with simulation for precision designs.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance status should be confirmed on the onsemi official product page for the LM2904NG suffix before design-in.

資料驗證日期: 2026-11-08 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

lm2904ng datasheet lm2904n datasheet lm2904n onsemi LM2904NG pinout LM2904NG equivalent LM2904NG replacement LM2904NG vs LM358NG LM2904NG drop-in replacement LM2904NG price LM2904NG buy onsemi LM2904NG dual op amp PDIP-8 LM2904NG single supply op amp

相關元件與詞彙

onsemi ON Semiconductor LM2904NG LM2904N LM2904B LM2904-N LM2904VN LM358NG Texas Instruments operational amplifier op amp dual op amp amplifier IC PDIP-8 dual in-line package through hole single-supply operation gain bandwidth product slew rate common-mode input range
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情