LM393DGKRG4 - Dual Open-Collector Comparator | TI
MPN: LM393DGKRG4 ✓ 啟用中LM393DGKRG4 概覽
A voltage comparator is a semiconductor that evaluates two input voltages and produces a logic-level result indicating which input is higher. In its open-collector configuration, the LM393DGKRG4 can pull its output low by sinking current through an external load resistor. This arrangement is useful for driving lamps, relays, logic inputs, and other pull-up-based interfaces without placing the transistor in the direct output-drive path.
The comparator family provides wide supply-voltage capability and low supply-current drain that is specified as 0.4 mA typical per comparator. Its differential operating architecture allows each half of the package to compare two signals independently. The B-version family described in the manufacturer documentation also offers lower offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance compared with the earlier LM393 generation.
Typical uses include window comparison, zero-cross detection, level translation, sensor threshold conditioning, and simple control-loop decisions. Because the outputs are open collector, a pull-up resistor is required when the output must represent a high logic state. The external resistor also determines output rise time, which should be considered when driving long traces, high-capacitance nodes, slow interfaces, or downstream devices with significant input capacitance.
Designers should verify the exact pin assignments, common-mode input limits, output-current limits, electrical characteristics, and absolute maximum ratings in the Texas Instruments datasheet before finalizing a PCB or production release. The verified device description identifies an 8-VSSOP package, but a matching package-diagram key is unavailable in the approved diagram library. A complete package pin map is therefore not assigned on this page.
This page consolidates the manufacturer-family characteristics, verified distributor listings, package information, practical comparator use cases, and engineering cautions. It also distinguishes confirmed LM393DGKRG4 attributes from parameters that require formal verification before schematic release, PCB layout, sourcing approval, or functional safety qualification.
直接替換替代品,適用於 LM393DGKRG4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM393DGKRG4 (相同外形與佔位) — 差異在於 Comparator Type, Number of Channels, Output Type, Package, Response Time.
LM393DGKR
✅ 直接替換聯絡詢價
查看資料表 →LM293DGKR
✅ 直接替換聯絡詢價
查看資料表 →LM2903DGKR
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LM393DGKRG4
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →LM393BDR
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LM393DGKRG4 最大額定值與電氣特性
| Comparator Type | Dual differential voltage comparator |
| Number of Channels | 2 channels |
| 輸出類型 | Open collector |
| Input Common-Mode Capability | Rail-to-rail |
| Supply Configuration | Single supply or dual supplies |
| Tested Maximum Supply Voltage, Non-V Devices | 30 V |
| Tested Maximum Supply Voltage, V-Suffix Devices | 32 V |
| Supply Current Drain | 0.4 mA typical per comparator |
| ESD Performance | 2 kV |
| 封裝 | 8-VSSOP |
| Package Pin Count | 8 pins |
| 安裝類型 | Surface mount |
| Shipping Format | Tape-and-reel |
LM393DGKRG4 8 pins 腳位配置指南
LM393DGKRG4(8 pins 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM393DGKRG4.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM393DGKRG4 適用於 6 應用s: Zero-Cross Detection, Sensor Threshold Conditioning, Window Comparison Control, Relay and Lamp Drive Interface, Power Supply Monitoring, Level and Signal Conditioning.
Zero-Cross Detection
The LM393DGKRG4 can detect the crossing point of an analog waveform by comparing the incoming signal with a reference voltage. Its two differential channels allow independent comparisons, while the open-collector output can pull a logic node low and use an external pull-up to produce a digital transition. The 0.4 mA typical supply-current drain per comparator is useful in low-power monitoring systems. During design, verify the exact input common-mode range, offset voltage, and propagation delay because the crossing accuracy and response time depend on these electrical characteristics.
推薦
Sensor Threshold Conditioning
The LM393DGKRG4 is suitable for converting a sensor output into a threshold decision when the signal remains inside the comparator's permitted common-mode range. One input can receive the sensor signal while the other receives a reference, and the open-collector output can drive an alert, indicator, or digital control input through a pull-up resistor. Its dual-channel arrangement allows two sensor thresholds to be handled on one package. Validate offset voltage, input bias current, and propagation delay against the required measurement accuracy before committing the threshold design.
推薦
Window Comparison Control
The LM393DGKRG4 can implement a voltage-window decision by using its two independent comparator channels to test an input against an upper and lower reference. The resulting open-collector outputs can be combined in digital logic to determine whether the monitored voltage lies within the permitted interval. This arrangement is useful in power-supply monitoring, battery systems, and industrial control inputs. Check the exact common-mode input range, output-current limit, and logic thresholds in the manufacturer datasheet because they determine how safely the references can be implemented.
推薦
Relay and Lamp Drive Interface
Because each LM393DGKRG4 output uses an open-collector transistor, the device can sink current into a pull-up-connected relay driver, lamp indicator, or logic interface. This topology can reduce the comparator's role from active output drive to a low-side switching function while allowing the pull-up voltage to define the interface level. The output current and voltage limits must be checked against the load, and a suitable flyback path is required for inductive loads. This use does not establish that the comparator can safely drive a relay coil directly.
推薦
Power Supply Monitoring
The LM393DGKRG4 can supervise a supply rail by comparing the monitored voltage with a reference and producing an open-collector fault indication. Its two channels support independent upper and lower monitoring functions, while the 0.4 mA typical drain per comparator helps limit the monitoring circuit's own supply demand. The monitored voltage must remain within the verified common-mode range, and the reference should be designed to avoid excessive input offset effects. Production design should also confirm startup behavior, output state during reset, and the exact maximum operating conditions.
推薦
Level and Signal Conditioning
The LM393DGKRG4 can compare a low-level signal with an adjustable reference and provide an open-collector logic indication when a defined threshold is crossed. This function is useful for adapting analog sensor conditions to digital control systems, particularly where a pull-up resistor can establish the receiving logic voltage. The two channels permit independent thresholds within one package. Confirm the propagation delay for the required decision rate, the input bias contribution to reference design, and the pull-up value needed to balance noise immunity against output rise time.
推薦
推薦產品摘要
工程參考資料,適用於 LM393DGKRG4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Brand | Texas Instruments |
| Package | 8-VSSOP |
| Comparator Configuration | Dual differential comparator |
| Output Type | Open collector |
| Supply Configuration | Single supply or dual supplies |
| Tested Maximum Supply Voltage | 30 V for non-V devices; 32 V for V-suffix devices |
| Supply Current Drain | 0.4 mA typical per comparator |
| Input Common-Mode Capability | Rail-to-rail |
| ESD Performance | 2 kV |
| Shipping Format | Tape-and-reel |
主要差異化特點
- Two independent general-purpose comparator channels (對比Single-channel comparator alternatives)
- Open-collector interface flexibility (對比Push-pull output comparators)
- Low supply-current drain for monitoring functions (對比Higher-current CMOS comparator families)
設計說明
Do not treat an open-collector output as a push-pull logic output. Add a pull-up resistor for systems that require a defined high state, and confirm that its voltage is compatible with both the comparator output and the downstream receiver. Check the resistor against the available sink current and total load capacitance before release, because a larger resistance reduces power but slows the rising edge.
Keep the pull-up resistor and the comparator's decoupling connection close to the device pins. Route high-impedance input and reference nets away from switching nodes and other sources of injected noise. The verified family documentation identifies lower input bias current as a B-version improvement, but the layout still needs to prevent leakage and coupling from degrading the effective threshold accuracy.
Verify the full datasheet pin-description table before assigning the eight VSSOP connections. Generic LM393 diagrams may not match the ordering suffix, exposed-pad arrangement, or production variant represented by LM393DGKRG4. Also confirm the handling instruction for the second comparator when only one channel is used; leaving both inputs at a valid common-mode level is generally safer than allowing an unused input to float.
合規資訊
Compliance status was not explicitly stated in the verified manufacturer-family and distributor information. The improved 2 kV ESD performance is an electrical characteristic, not an AEC-Q100 qualification claim.