Texas Instruments

LM393DGKRG4 - Dual Open-Collector Comparator | TI

N.º de pieza: LM393DGKRG4 ✓ Activo
Single supply or dual supplies Vdss 0.4 mA typical per comparator Id 8-VSSOP Package
MOQ: 1 |

LM393DGKRG4 Descripción general

The Texas Instruments LM393DGKRG4 is a dual differential voltage comparator with two independent open-collector outputs, supplied in an 8-VSSOP package. It supports single-supply or dual-supply operation, a tested maximum supply voltage of 30 V for standard non-V devices, and a tested maximum of 32 V for V-suffix devices. The package is supplied in tape-and-reel form.

A voltage comparator is a semiconductor that evaluates two input voltages and produces a logic-level result indicating which input is higher. In its open-collector configuration, the LM393DGKRG4 can pull its output low by sinking current through an external load resistor. This arrangement is useful for driving lamps, relays, logic inputs, and other pull-up-based interfaces without placing the transistor in the direct output-drive path.

The comparator family provides wide supply-voltage capability and low supply-current drain that is specified as 0.4 mA typical per comparator. Its differential operating architecture allows each half of the package to compare two signals independently. The B-version family described in the manufacturer documentation also offers lower offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance compared with the earlier LM393 generation.

Typical uses include window comparison, zero-cross detection, level translation, sensor threshold conditioning, and simple control-loop decisions. Because the outputs are open collector, a pull-up resistor is required when the output must represent a high logic state. The external resistor also determines output rise time, which should be considered when driving long traces, high-capacitance nodes, slow interfaces, or downstream devices with significant input capacitance.

Designers should verify the exact pin assignments, common-mode input limits, output-current limits, electrical characteristics, and absolute maximum ratings in the Texas Instruments datasheet before finalizing a PCB or production release. The verified device description identifies an 8-VSSOP package, but a matching package-diagram key is unavailable in the approved diagram library. A complete package pin map is therefore not assigned on this page.

This page consolidates the manufacturer-family characteristics, verified distributor listings, package information, practical comparator use cases, and engineering cautions. It also distinguishes confirmed LM393DGKRG4 attributes from parameters that require formal verification before schematic release, PCB layout, sourcing approval, or functional safety qualification.

Alternativas directas para LM393DGKRG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM393DGKRG4 (mismo factor de forma y huella) — difiere en Comparator Type, Number of Channels, Output Type, Package, Response Time.

Texas Instruments
Comparator Type: Dual differential, general-purpose comparator
Output Type: Open-collector
Package: 8-pin VSSOP
Comparar con LM393DGKRG4 →
Texas Instruments
Output Type: Open-collector
Package: 8-pin VSSOP
Response Time: 300 ns
Comparar con LM393DGKRG4 →
Texas Instruments
Number of Channels: 2 independent channels
Comparar con LM393DGKRG4 →

LM393DGKR

✅ Sustitución directa
Texas Instruments
📦 8-pin VSSOP
Dual differential voltage comparator · 2 independent channels · 2 V to 36 V · 2 V to 36 V · VCC at least 1.5 V more positive than input common-mode voltage · Open collector · Differential inputs on each channel · 8-VSSOP

Consulte el precio

Ver hoja de datos →

LM293DGKR

✅ Sustitución directa
Texas Instruments
📦 8-pin VSSOP
Dual differential voltage comparator · 2 channels · 2 V to 36 V · 300 ns · Approximately 200 uA · Open-collector · Rail-to-rail · -40 C to +85 C

Consulte el precio

Ver hoja de datos →

LM2903DGKR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 8-pin VSSOP
Dual differential, general-purpose comparator · 2 channels · Open-collector · Rail-to-rail · 2 V to 36 V · -1 V to +18 V · 1.3 us · 8-pin VSSOP

Consulte el precio

Ver hoja de datos →

LM393DGKRG4

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 8-pin VSSOP
Dual differential voltage comparator · 2 channels · Open collector · Rail-to-rail · Single supply or dual supplies · 30 V · 32 V · 0.4 mA typical per comparator

Consulte el precio

Ver hoja de datos →

LM393BDR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin VSSOP
B-version family offers lower offset, lower bias current, lower supply current, and faster response, while retaining LM393 dual-comparator functionality.

📋 Alternativa de referencia (no en el catálogo)

LM393DGKRG4 Valores máximos y características eléctricas

Comparator Type Dual differential voltage comparator
Number of Channels 2 channels
Tipo de salida Open collector
Input Common-Mode Capability Rail-to-rail
Supply Configuration Single supply or dual supplies
Tested Maximum Supply Voltage, Non-V Devices 30 V
Tested Maximum Supply Voltage, V-Suffix Devices 32 V
Supply Current Drain 0.4 mA typical per comparator
ESD Performance 2 kV
Encapsulado 8-VSSOP
Package Pin Count 8 pins
Tipo de montaje Surface mount
Shipping Format Tape-and-reel

Guía de configuración de pines de LM393DGKRG4 8 pins

Configuración de pines para LM393DGKRG4 (encapsulado 8 pins). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8 pins para LM393DGKRG4

No hay datos detallados de patillaje disponibles para LM393DGKRG4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LM393DGKRG4 es adecuado para 6 aplicacións: Zero-Cross Detection, Sensor Threshold Conditioning, Window Comparison Control, Relay and Lamp Drive Interface, Power Supply Monitoring, Level and Signal Conditioning.

⚡

Zero-Cross Detection

The LM393DGKRG4 can detect the crossing point of an analog waveform by comparing the incoming signal with a reference voltage. Its two differential channels allow independent comparisons, while the open-collector output can pull a logic node low and use an external pull-up to produce a digital transition. The 0.4 mA typical supply-current drain per comparator is useful in low-power monitoring systems. During design, verify the exact input common-mode range, offset voltage, and propagation delay because the crossing accuracy and response time depend on these electrical characteristics.

🧩

Sensor Threshold Conditioning

The LM393DGKRG4 is suitable for converting a sensor output into a threshold decision when the signal remains inside the comparator's permitted common-mode range. One input can receive the sensor signal while the other receives a reference, and the open-collector output can drive an alert, indicator, or digital control input through a pull-up resistor. Its dual-channel arrangement allows two sensor thresholds to be handled on one package. Validate offset voltage, input bias current, and propagation delay against the required measurement accuracy before committing the threshold design.

🏭

Window Comparison Control

The LM393DGKRG4 can implement a voltage-window decision by using its two independent comparator channels to test an input against an upper and lower reference. The resulting open-collector outputs can be combined in digital logic to determine whether the monitored voltage lies within the permitted interval. This arrangement is useful in power-supply monitoring, battery systems, and industrial control inputs. Check the exact common-mode input range, output-current limit, and logic thresholds in the manufacturer datasheet because they determine how safely the references can be implemented.

⚡

Relay and Lamp Drive Interface

Because each LM393DGKRG4 output uses an open-collector transistor, the device can sink current into a pull-up-connected relay driver, lamp indicator, or logic interface. This topology can reduce the comparator's role from active output drive to a low-side switching function while allowing the pull-up voltage to define the interface level. The output current and voltage limits must be checked against the load, and a suitable flyback path is required for inductive loads. This use does not establish that the comparator can safely drive a relay coil directly.

🖥️

Power Supply Monitoring

The LM393DGKRG4 can supervise a supply rail by comparing the monitored voltage with a reference and producing an open-collector fault indication. Its two channels support independent upper and lower monitoring functions, while the 0.4 mA typical drain per comparator helps limit the monitoring circuit's own supply demand. The monitored voltage must remain within the verified common-mode range, and the reference should be designed to avoid excessive input offset effects. Production design should also confirm startup behavior, output state during reset, and the exact maximum operating conditions.

🔧

Level and Signal Conditioning

The LM393DGKRG4 can compare a low-level signal with an adjustable reference and provide an open-collector logic indication when a defined threshold is crossed. This function is useful for adapting analog sensor conditions to digital control systems, particularly where a pull-up resistor can establish the receiving logic voltage. The two channels permit independent thresholds within one package. Confirm the propagation delay for the required decision rate, the input bias contribution to reference design, and the pull-up value needed to balance noise immunity against output rise time.

Resumen de productos recomendados

LM393B Next-generation member of the documented LM393 comparator family Se usa en: Zero-Cross Detection, Window Comparison Control, Relay and Lamp Drive Interface, Power Supply Monitoring LM2903B Related dual comparator family documented alongside LM393B Se usa en: Zero-Cross Detection, Window Comparison Control, Relay and Lamp Drive Interface, Power Supply Monitoring LM193 Dual comparator family identified in the manufacturer documentation Se usa en: Sensor Threshold Conditioning, Level and Signal Conditioning LM293 Dual comparator family identified in the manufacturer documentation Se usa en: Sensor Threshold Conditioning, Level and Signal Conditioning
What is the LM393DGKRG4?
The LM393DGKRG4 is a Texas Instruments dual differential voltage comparator with open-collector outputs in an 8-VSSOP package. According to the manufacturer family documentation, each comparator can operate from a single supply or dual supplies, while the standard non-V version is tested to 30 V. The two channels provide independent comparison functions on the same device.
What are the key specifications of LM393DGKRG4?
The principal confirmed LM393DGKRG4 specifications are two differential comparator channels, open-collector outputs, rail-to-rail input common-mode capability, an 8-VSSOP package, and 0.4 mA typical supply-current drain per comparator. The Texas Instruments datasheet family also identifies a tested maximum of 30 V for non-V devices and improved 2 kV ESD performance. Other detailed electrical limits must be confirmed in the datasheet.
Where can I download the LM393DGKRG4 datasheet PDF?
The LM393DGKRG4 datasheet PDF is available from the Texas Instruments documentation copy listed on this page. It contains the LM393B and LM2903B family information, including supply behavior, input characteristics, output stages, and application guidance. Use the manufacturer document as the controlling reference for the final schematic and production design.
Where can I find the LM393DGKRG4 pinout?
The LM393DGKRG4 pinout is defined by the Texas Instruments datasheet for the 8-VSSOP package. The verified product listing confirms the package and pin count, but the complete numbered pin-description table is not included in the referenced material. Assign PCB connections using the manufacturer pin-description table rather than inferring positions from a generic 8-pin comparator diagram.
How does the LM393DGKRG4 open-collector output work?
The LM393DGKRG4 open-collector output can pull its output node low by sinking current, but it cannot actively drive a high voltage. A pull-up resistor is therefore required in most digital-logic applications. The resistor establishes the high output level and also controls the output rise time according to the total node capacitance, making it important in high-impedance or slow-logic interfaces.
What supply voltage can the LM393DGKRG4 handle?
The LM393DGKRG4 belongs to the LM393B family, which is specified for single-supply or dual-supply operation. The verified family material identifies a tested maximum supply of 30 V for standard non-V devices and 32 V for V-suffix devices. These are maximum ratings rather than recommended operating points, so the exact operating range must be checked in the manufacturer datasheet.
Is LM393DGKRG4 suitable for single-supply 5 V circuits?
The LM393DGKRG4 is designed to support single-supply operation, making a 5 V application structurally compatible with the family. The open-collector output can drive a 5 V-defined logic node through a pull-up resistor when the pull-up is also connected to 5 V. Confirm the exact input common-mode limits, output-current limits, and propagation delay for the operating conditions before design release.
What can replace the LM393DGKRG4?
A true drop-in replacement must use the same 8-VSSOP footprint, preserve the numbered pin functions, support the required supply range, and meet the load-dependent output specifications. No qualifying pin-to-pin substitute was established for the exact LM393DGKRG4 ordering code. Similar LM393-family devices may differ in package, suffix, electrical limits, or production status, so each candidate must be checked against the manufacturer pinout.
Is the LM393DGKRG4 the same as an LM393N?
The LM393DGKRG4 is not an unconditional substitute for an LM393N because the ordering codes describe different package variants. LM393DGKRG4 is identified as an 8-VSSOP surface-mount part, while LM393N denotes the through-DIP family designation. A board-level replacement requires matching the exact footprint and all eight pin functions rather than relying only on the LM393 family name.
When should I choose the LM393DGKRG4 instead of another dual comparator?
Choose the LM393DGKRG4 when the design specifically requires its 8-VSSOP footprint, open-collector outputs, single- or dual-supply operation, and LM393-family characteristics. Select another comparator instead when the application needs a push-pull output, lower operating current, faster propagation, rail-to-rail output behavior, or a verified wider common-mode input range. The final choice should follow the application requirements rather than package similarity alone.
How do LM393DGKRG4 and LM2903B compare?
LM393DGKRG4 and LM2903B belong to the same documented comparator family, but they are not automatically interchangeable for every operating point. The manufacturer material groups LM393B and LM2903B together while noting different device families within that group. Compare their exact supply ranges, temperature grades, common-mode limits, output ratings, and orderable package variants before choosing one for a production design.
What is the best cross-brand equivalent for LM393DGKRG4?
No cross-brand equivalent can be recommended as a confirmed drop-in replacement from the available technical information. A valid candidate must match the 8-VSSOP footprint, pin functions, open-collector topology, supply range, input common-mode limits, output-current capability, and thermal operating grade. Reviewing a generic LM393 equivalent list is insufficient because package and electrical differences can prevent board-level interchangeability.
What are the main design considerations for LM393DGKRG4?
The main design considerations are output pull-up selection, input common-mode range, output-current capability, propagation delay, and package thermal performance. Place the pull-up resistor close to the open-collector output and check that its rising-edge behavior suits the connected load. Confirm the absolute maximum ratings, operating-temperature range, and unused-channel configuration in the manufacturer datasheet.
Where can I buy LM393DGKRG4 and request current pricing and lead time?
Use the Request a Quote form on this page to request current pricing, stock, lead time, and orderable packaging for LM393DGKRG4. Quote requests are the appropriate channel for time-sensitive commercial data because inventory and lead time can change. Include the required quantity, delivery destination, and any date-code or traceability requirements with the request.
How do I prevent false triggering in a LM393DGKRG4 comparator circuit?
Prevent false triggering by controlling input offset, noise, and the voltage slope near the comparison threshold. The family documentation identifies lower offset voltage and input bias current as B-version improvements, but the exact numeric limits must be verified for the selected operating conditions. Slow input crossing can also increase uncertainty around the threshold, so add hysteresis when the application permits it.

Datos de referencia de ingeniería para LM393DGKRG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LM393DGKRG4 when a new PCB specifically uses its 8-VSSOP footprint and the design benefits from two open-collector differential comparator channels. It is particularly appropriate for threshold, window-monitoring, zero-cross, and pull-up-based logic-interface applications. Select a push-pull comparator when a fast, actively driven output edge is required, or when the downstream circuit cannot accommodate an external pull-up. Select a lower-power CMOS comparator when supply consumption dominates the design and its full input range, output behavior, and pin compatibility have been verified. Treat other LM393-family devices as related options rather than automatic replacements: suffix codes can change temperature grade, supply limits, package, or orderable construction. Before substitution, compare the exact footprint, every numbered pin, common-mode range, output-current limits, propagation delay, offset voltage, and maximum operating conditions.

Comparación con alternativas

Parámetro Este producto
Brand Texas Instruments
Package 8-VSSOP
Comparator Configuration Dual differential comparator
Output Type Open collector
Supply Configuration Single supply or dual supplies
Tested Maximum Supply Voltage 30 V for non-V devices; 32 V for V-suffix devices
Supply Current Drain 0.4 mA typical per comparator
Input Common-Mode Capability Rail-to-rail
ESD Performance 2 kV
Shipping Format Tape-and-reel

Diferenciadores clave

  • Two independent general-purpose comparator channels (frente a Single-channel comparator alternatives)
  • Open-collector interface flexibility (frente a Push-pull output comparators)
  • Low supply-current drain for monitoring functions (frente a Higher-current CMOS comparator families)

Notas de diseño

Do not treat an open-collector output as a push-pull logic output. Add a pull-up resistor for systems that require a defined high state, and confirm that its voltage is compatible with both the comparator output and the downstream receiver. Check the resistor against the available sink current and total load capacitance before release, because a larger resistance reduces power but slows the rising edge.

Keep the pull-up resistor and the comparator's decoupling connection close to the device pins. Route high-impedance input and reference nets away from switching nodes and other sources of injected noise. The verified family documentation identifies lower input bias current as a B-version improvement, but the layout still needs to prevent leakage and coupling from degrading the effective threshold accuracy.

Verify the full datasheet pin-description table before assigning the eight VSSOP connections. Generic LM393 diagrams may not match the ordering suffix, exposed-pad arrangement, or production variant represented by LM393DGKRG4. Also confirm the handling instruction for the second comparator when only one channel is used; leaving both inputs at a valid common-mode level is generally safer than allowing an unused input to float.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status was not explicitly stated in the verified manufacturer-family and distributor information. The improved 2 kV ESD performance is an electrical characteristic, not an AEC-Q100 qualification claim.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LM393DGKRG4 datasheet LM393DGKRG4 datasheet pdf LM393DGKRG4 pinout Texas Instruments LM393DGKRG4 LM393DGKRG4 equivalent LM393DGKRG4 replacement LM393DGKRG4 8-VSSOP LM393DGKRG4 open collector comparator LM393DGKRG4 vs LM2903B LM393DGKRG4 application circuit LM393DGKRG4 price LM393DGKRG4 stock

Componentes & términos relacionados

Texas Instruments LM393DGKRG4 LM393B LM2903B LM193 LM293 dual differential comparator voltage comparator open-collector output rail-to-rail input supply-current drain input offset voltage input bias current propagation delay ESD protection 8-VSSOP VSSOP family surface-mount package single-supply operation dual-supply operation semiconductor
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ