NXP Semiconductors

LPC1810FET100 - 180MHz Cortex-M3 MCU in TFBGA100 | NXP

MPN: LPC1810FET100 ✓ 啟用中
100-TFBGA, 9 x 9 mm Package Up to 180 MHz Speed ROMless; external nonvolatile memory required Memory
MOQ: 1 |

LPC1810FET100 概覽

The NXP Semiconductors LPC1810FET100 is a high-performance, 32-bit Arm Cortex-M3 microcontroller with a maximum stated operating speed of 180 MHz, 136 kB of SRAM, CAN 2.0B, Quad SPI Flash Interface, and a State Configurable Timer. It is packaged in a 100-ball TFBGA package measuring 9 x 9 mm. The MCU is ROMless, so an external nonvolatile memory interface is required for firmware storage.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The Cortex-M3 belongs to the Arm Cortex-M family of compact embedded processors, while the LPC1810 belongs to NXP's LPC18xx industrial microcontroller portfolio. This hierarchy places the device among flashless 32-bit MCUs intended for control, communications, and data-acquisition systems.

The LPC1810FET100 combines a 150 MHz distributor-listed operating rating with an NXP product-page maximum of up to 180 MHz. Its 136 kB SRAM provides working memory for protocols, control loops, and buffered data. Peripheral integration includes CAN 2.0B for networked industrial equipment, a Quad SPI Flash Interface for external code and data storage, and a State Configurable Timer for flexible event timing or waveform generation.

As a ROMless device, the LPC1810FET100 is intended to boot from external nonvolatile memory. The Quad SPI Flash Interface provides a dedicated path for code and configuration storage while the Cortex-M3 performs real-time processing. CAN support makes the device relevant to industrial controllers, motor-control equipment, instrumentation, and service-bus nodes where robust field-bus communication is required.

Typical designs include industrial automation controllers, CAN-connected sensor gateways, embedded data-acquisition units, communications equipment, and compact control systems. External memory capacity and the selected firmware image determine how much application code and data can be stored. Engineers should also account for BGA assembly requirements, power-management design, clock configuration, and peripheral pin multiplexing.

A key implementation consideration is the 9 x 9 mm TFBGA100 footprint. The board must provide all 100 balls, including power, ground, signal, and exposed thermal connections defined by the package drawing. Follow NXP's pin-connection and board-layout guidance to preserve signal integrity, provide clean supply rails, and maintain thermal performance during operation.

This product page combines NXP device information, distributor package identification, strict same-package replacement analysis, and practical integration considerations. It also distinguishes a genuine PCB drop-in replacement from merely similar Cortex-M3 devices, helping engineers make sourcing and design decisions without assuming that equal memory size, package dimensions, or processor architecture guarantees pin compatibility.

直接替換替代品,適用於 LPC1810FET100 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LPC1810FET100 (相同外形與佔位) — 差異在於 Package.

NXP Semiconductors
Package: 100-pin TFBGA, 9 mm x 9 mm
比較對象 LPC1810FET100 →

LPC1811FET100

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-TFBGA (9 x 9 mm)
Embedded program memory differs from the ROMless LPC1810FET100 while the Cortex-M3 architecture and 100-TFBGA footprint are retained; exact memory difference is

📋 參考替代品(不在目錄中)

LPC1812FET100

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-TFBGA (9 x 9 mm)
Embedded program memory differs from the ROMless LPC1810FET100 while the Cortex-M3 architecture and 100-TFBGA footprint are retained; exact memory difference is

📋 參考替代品(不在目錄中)

LPC1813JET100E

✅ 直接替換
NXP Semiconductors
📦 100-TFBGA (9 x 9 mm)
32-bit ARM Cortex-M3 microcontroller · NXP Semiconductors · 180 MHz · ARM Cortex-M3 · 32-bit · 512 KB · 512K x 8

聯絡詢價

查看資料表 →

LPC1814FET100

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-TFBGA (9 x 9 mm)
The LPC1814 family position changes embedded program-memory and peripheral resources relative to the ROMless LPC1810FET100 while retaining the 100-TFBGA footprint; exact differences are

📋 參考替代品(不在目錄中)

LPC1815FET100

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-TFBGA (9 x 9 mm)
The LPC1815 family position changes embedded program-memory and communication resources relative to the ROMless LPC1810FET100 while retaining the 100-TFBGA footprint; exact differences are

📋 參考替代品(不在目錄中)

LPC1810FET100 最大額定值與電氣特性

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core Arm Cortex-M3
Maximum Operating Frequency Up to 180 MHz
Distributor-Listed Operating Frequency 150 MHz
Internal SRAM 136 kB
Program Memory ROMless; external nonvolatile memory required
CAN Support CAN 2.0B
External Memory Interface Quad SPI Flash Interface
Timer Feature State Configurable Timer
Architecture 32-bit
封裝 100-TFBGA, 9 x 9 mm
安裝類型 Surface mount
Pin/Ball Count 100 balls

LPC1810FET100 100-tfbga, 9 x 9 mm 腳位配置指南

LPC1810FET100(100-tfbga, 9 x 9 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

LPC1810FET100 的 100-tfbga, 9 x 9 mm 封裝腳位圖

無詳細腳位定義資料: LPC1810FET100.

請參閱 資料表 以查看完整腳位配置。

典型應用

LPC1810FET100 適用於 6 應用s: CAN-Connected Industrial Controller, Industrial Sensor Gateway, External-SPI-Flash Data Logger, Compact Data-Acquisition Unit, Communications Equipment, Automotive or Robotics Control Module.

🏭

CAN-Connected Industrial Controller

The LPC1810FET100 fits industrial control nodes that require deterministic field-bus communication without adding a separate CAN controller. Its Cortex-M3 core operates at up to 180 MHz according to NXP, while CAN 2.0B handles bus framing and the 136 kB SRAM supports protocol state, control variables, and diagnostics. The MCU is placed beside a suitable CAN transceiver, with the transceiver's logic reference and bus-side isolation or surge protection handled separately. Because the LPC1810FET100 is ROMless, firmware can reside in external SPI flash reached through the dedicated Quad SPI Flash Interface. Designers should size the external memory for the boot image, update workspace, and application data. The main performance benefit is integrated CAN and high-speed control in one 9 x 9 mm TFBGA device, although regulator headroom, transceiver standby behavior, and bus timing margins must be verified.

🧩

Industrial Sensor Gateway

The LPC1810FET100 is suitable for a compact gateway that aggregates readings from local sensors, runs filtering and protocol conversion, and forwards status over CAN. Its 136 kB of internal SRAM provides working space for sampling buffers, calibration tables, message queues, and network stacks, while the 180 MHz maximum Cortex-M3 speed allows useful processing headroom. A serial or SPI sensor can share the external bus architecture with the Quad SPI Flash Interface, provided the selected peripheral instances and pins do not conflict. Use external SPI flash for boot firmware, configuration data, and buffered records. The benefit is integration of high-speed control, SRAM, and CAN in one package, reducing the component count for compact industrial equipment. Engineering checks include sensor timing, interrupt priority, watchdog strategy, thermal performance, and the operating limits of the selected power rails.

🖥️

External-SPI-Flash Data Logger

A ROMless implementation fits the LPC1810FET100 particularly well in a data logger that stores events in external serial flash. The dedicated Quad SPI Flash Interface provides a defined path for code and nonvolatile data, while the 136 kB SRAM can buffer measurements before the controller writes them to storage. At operating speeds up to 180 MHz, the Cortex-M3 can handle timestamps, filtering, compression, and communication tasks concurrently. Separate logic devices should be connected according to the datasheet's multiplexing rules so the flash interface remains available. The design advantage is the combination of external memory support and substantial internal SRAM without reserving internal program flash. Practical considerations include flash endurance, write wear leveling, brownout-safe update procedures, boot recovery, and ensuring that the storage device and power supply remain within their specified limits.

📡

Compact Data-Acquisition Unit

The LPC1810FET100 can serve as the control core of a compact data-acquisition unit that buffers sensor data, applies calibration, and transfers results over a communications network. Its 136 kB of SRAM supports sample buffers and protocol handling, and the Cortex-M3 architecture provides substantially more processing capability than a simple state-machine controller. The State Configurable Timer can assist with periodic sampling or event timing when its configured outputs are assigned to the required pins. The ROMless configuration permits the program image and calibration records to be maintained in external SPI flash, enabling controlled firmware revisions. CAN 2.0B is useful where the acquisition unit participates in an industrial network, though a physical transceiver is still required. The principal design trade-off is board complexity from external memory and a 100-ball BGA, balanced against compact packaging and integrated real-time processing.

🌐

Communications Equipment

The LPC1810FET100 fits communications equipment that requires local protocol processing and deterministic control alongside a CAN management interface. Its maximum operating frequency of 180 MHz and 136 kB of SRAM allow buffering and frame processing, while CAN 2.0B handles network management, diagnostics, or a lower-speed industrial side channel. The Quad SPI Flash Interface supports external boot code and configuration data, useful in network appliances with remotely managed firmware. Designers can implement the high-speed data path through other LPC18xx peripherals subject to the exact device pin and peripheral configuration, so the final signal assignment must come from the datasheet. The integrated MCU reduces the need for separate logic but requires careful grounding between communication circuitry, external memory, and the 100-TFBGA device. Watchdog handling, EMC design, firmware rollback, and connector surge protection remain important implementation concerns.

🚗

Automotive or Robotics Control Module

The LPC1810FET100 is a candidate for compact robotics or automotive-adjacent control modules that need CAN communications and deterministic real-time behavior. The Cortex-M3 core operates at up to 180 MHz according to NXP, and the 136 kB SRAM supports motion-state calculations, diagnostics, and communication buffering. CAN 2.0B connects the controller to a vehicle or robot network through an external transceiver, while the ROMless architecture allows firmware to be stored in external SPI flash. This arrangement can support field updates, but update integrity, boot fallback, and brownout handling must be designed explicitly. Qualification for an automotive environment cannot be inferred from the product family alone; temperature range, AEC-Q100 status, transient immunity, and functional-safety requirements require separate confirmation. For robotics, the same part may be suitable where size and CAN integration matter more than internal program flash.

推薦產品摘要

LPC1813JET100E NXP Semiconductors 用於: CAN-Connected Industrial Controller, External-SPI-Flash Data Logger, Compact Data-Acquisition Unit LPC1812FET100 Same-package LPC18xx controller candidate 用於: CAN-Connected Industrial Controller, External-SPI-Flash Data Logger, Automotive or Robotics Control Module LPC1811FET100 Same-package LPC18xx controller candidate 用於: Industrial Sensor Gateway, Automotive or Robotics Control Module LPC1815FET100 Same-package LPC18xx controller candidate 用於: Industrial Sensor Gateway, Communications Equipment LPC1814FET100 Same-package LPC18xx controller candidate 用於: Compact Data-Acquisition Unit, Communications Equipment
What is the LPC1810FET100?
The LPC1810FET100 is a ROMless, 32-bit Arm Cortex-M3 microcontroller from NXP Semiconductors with 136 kB of SRAM and a maximum stated operating speed of 180 MHz. According to the NXP product page, it integrates CAN 2.0B, a Quad SPI Flash Interface, and a State Configurable Timer in a 100-ball TFBGA package measuring 9 x 9 mm.
What is the operating voltage of LPC1810FET100?
The operating voltage range for the LPC1810FET100 is not stated on the NXP product page excerpt, so use the electrical characteristics table in the manufacturer datasheet before assigning power rails. The device is a 3.3 V-class embedded MCU in many designs, but that application convention must not replace the device-specific limits. Check absolute maximum, recommended operating, and I/O voltage conditions before layout.
How much memory does LPC1810FET100 have?
The LPC1810FET100 provides 136 kB of internal SRAM and no internal program memory because the MCU is ROMless. According to the NXP product page, the Quad SPI Flash Interface connects the device to external nonvolatile storage for firmware and data. The actual usable code space depends on the external memory device, its capacity, and the boot configuration.
Where can I download the LPC1810FET100 datasheet PDF?
Download the LPC1810FET100 documentation from the official NXP product page at https://www.nxp.com/part/LPC1810FET100. The NXP page links the authoritative device documentation, while the datasheet contains the complete pin connection table, electrical characteristics, memory map, peripheral descriptions, and package drawings needed for PCB design.
Where can I find the LPC1810FET100 pinout and 100-TFBGA footprint?
The LPC1810FET100 pin assignment and land pattern are documented in the NXP datasheet and package information, not by the abbreviated distributor summaries. Because the exact 100-ball pin table is not reproduced in the product listing, use the manufacturer's pin-connection diagram for every ball assignment and land-pattern dimensions for the 9 x 9 mm TFBGA footprint.
Does LPC1810FET100 support CAN and external SPI flash?
Yes, the LPC1810FET100 includes CAN 2.0B and a Quad SPI Flash Interface. According to NXP, the Quad SPI Flash Interface supports external nonvolatile storage for a ROMless design, while CAN 2.0B supports communication with industrial and automotive-style field-bus nodes. Protocol details, transceiver requirements, and electrical timing must be confirmed in the datasheet.
Can LPC1810FET100 replace LPC1813JET100E?
LPC1813JET100E is the closest verified same-family candidate for a replacement review, but it is not automatically a drop-in substitute. The LPC1813 family position can change embedded program-memory resources and peripheral options relative to the ROMless LPC1810FET100, while both are associated with the 100-TFBGA footprint. Confirm ball-level compatibility, boot configuration, pin multiplexing, and firmware before approving a replacement.
What can replace LPC1810FET100 on the same PCB?
No cross-manufacturer drop-in replacement is established for the LPC1810FET100. The strongest candidates are NXP LPC18xx devices using the same 100-TFBGA footprint, including LPC1811FET100, LPC1812FET100, LPC1813JET100E, LPC1814FET100, and LPC1815FET100. Each requires review because embedded flash, SRAM, Ethernet, USB, and peripheral assignments can differ despite the common package.
LPC1810FET100 vs LPC1813JET100E - which is better for a CAN controller?
Choose the LPC1810FET100 when the design intentionally uses external SPI flash with its ROMless architecture and 136 kB SRAM; evaluate LPC1813JET100E when its embedded program memory can simplify firmware storage. Both are Cortex-M3-class parts associated with CAN-capable LPC18xx devices, but memory, peripheral, and ball-level compatibility must be checked against the exact schematic and device documentation.
When should I choose LPC1810FET100 over an LPC18xx alternative?
Choose the LPC1810FET100 when a ROMless design, 136 kB of SRAM, CAN 2.0B, and the Quad SPI Flash Interface are required in a 100-TFBGA footprint. An LPC18xx member with embedded flash may simplify boot and storage, but it may also introduce different memory resources or peripheral assignments. Select the LPC1810FET100 when its exact architecture reduces unnecessary flash and matches the established board.
Is LPC1810FET100 suitable for industrial control and CAN networking?
The LPC1810FET100 is suitable for many industrial-control and CAN-networking designs because it combines a 150 MHz distributor-listed operating rating, up to 180 MHz according to NXP, 136 kB of SRAM, and CAN 2.0B. The ROMless architecture supports external SPI flash storage. Qualification, temperature range, supply limits, transient protection, and transceiver selection still require project-specific verification.
How much power does LPC1810FET100 consume?
A definitive operating-current figure is not available in the device listing, and it cannot be inferred reliably from the 180 MHz maximum clock frequency. Actual consumption depends on supply voltage, clock activity, enabled peripherals, SRAM access, I/O state, and temperature. Use the datasheet operating-current characteristics for the selected clock and peripheral configuration, then include margin in the power design.
Where can I buy LPC1810FET100 online?
Use the Request a Quote form on this page to request LPC1810FET100 availability, current lead time, and ordering information. The exact MPN is also identified as LPC1810FET100,551 by authorized distribution listings, which may represent the orderable commercial suffix. Confirm the complete orderable suffix, package, quantity, and traceability requirements before placing an order.
What is the price of LPC1810FET100?
Pricing for LPC1810FET100 is best obtained through the Request a Quote form on this page because commercial pricing can vary with order quantity, date, packaging, and sourcing conditions. The form allows buyers to request a current quotation for the exact MPN without relying on an outdated catalog price. Request the complete orderable suffix, LPC1810FET100,551, when preparing the quotation.
Is LPC1810FET100 in stock and what is its lead time?
Current stock and lead time for LPC1810FET100 should be confirmed through the Request a Quote form on this page. The manufacturer offers the device in a 100-TFBGA package, and distributor listings identify the commercial suffix as LPC1810FET100,551. Include your required quantity, date code, target price, and shipment destination so the supplier can return an actionable availability response.
What are the key specifications of LPC1810FET100 that engineers should know?
The key LPC1810FET100 specifications are a 32-bit Arm Cortex-M3 core, operation up to 180 MHz, 136 kB of SRAM, ROMless program storage, CAN 2.0B, a Quad SPI Flash Interface, and a State Configurable Timer. NXP packages the device in a 100-ball TFBGA measuring 9 x 9 mm. Distributor records also identify a 150 MHz operating rating, so the intended clock configuration should be checked against the datasheet.
Is LPC1810FET100 the same as AT91SAM7X256B-CU-999?
No. LPC1810FET100 and AT91SAM7X256B-CU-999 are both 32-bit Arm microcontroller candidates listed in 100-TFBGA packaging, but that shared package description does not establish pin-to-pin compatibility. They use different microcontroller families and require separate peripheral, memory, clock, software, and land-pattern review. Treat the AT91SAM7X256B-CU-999 as a design-review option rather than a drop-in replacement.

工程參考資料,適用於 LPC1810FET100 — 比較、設計指引及合規資訊。

選型指南

Choose the LPC1810FET100 when the design specifically benefits from a ROMless Cortex-M3 architecture, 136 kB of SRAM, CAN 2.0B, and a dedicated Quad SPI Flash Interface in a 100-TFBGA package. It is appropriate for industrial controllers, CAN nodes, data loggers, and communication equipment that intentionally stores firmware and data in external SPI flash. Evaluate LPC1813JET100E when embedded program memory could simplify storage and boot design, but verify its exact memory capacity, peripheral set, and ball assignments. LPC1811FET100 and LPC1812FET100 may suit nearby LPC18xx designs, while LPC1814FET100 and LPC1815FET100 can be relevant when their additional resources match the system better. None should be approved solely because its body size is 9 x 9 mm; verify package drawing, ball map, boot mode, supply assignments, peripheral multiplexing, software support, and lifecycle requirements. The AT91SAM7X256B-CU-999 is a different MCU family and is not a verified drop-in substitute.

與替代品比較

參數 本產品 LPC1811FET100 LPC1812FET100 LPC1813JET100E LPC1814FET100 LPC1815FET100
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm) 100-TFBGA (9 x 9 mm)
Processor Core Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3 Arm Cortex-M3

主要差異化特點

  • ROMless architecture with a dedicated Quad SPI Flash Interface (對比LPC1813JET100E)
  • 136 kB of internal SRAM (對比LPC1813JET100E)
  • Up to 180 MHz operating speed with CAN 2.0B integration (對比LPC1813JET100E)
  • Compact 9 x 9 mm TFBGA100 implementation (對比LPC1811FET100)

設計說明

Use the manufacturer's 100-TFBGA land pattern and exact ball map rather than deriving a footprint from the 9 x 9 mm body size alone. Place external SPI flash, decoupling, and any CAN transceiver or interface circuitry according to the recommended layout, keeping high-current and high-speed paths away from sensitive inputs. Verify assembly clearances, solder-mask design, and via-in-pad requirements with the board manufacturer.

Decouple each supply pin with the capacitance and placement specified in the NXP datasheet, and confirm the regulator can meet both startup and peak current requirements at the intended clock. Because operating current varies with clock activity, SRAM use, peripherals, and temperature, evaluate the worst-case load rather than relying on a nominal figure. Also account for voltage tolerance, sequencing, and brownout behavior for a ROMless boot design.

Do not treat a shared TFBGA package as proof that every LPC18xx member is automatically interchangeable. Compare ball-level signals, boot configuration, supply pins, peripheral multiplexing, embedded versus external program memory, and software startup support. For the LPC1810FET100, make the external flash capacity, boot-image format, firmware update method, and recovery path part of the hardware validation plan.

Estimate junction temperature from actual dissipation and the package's specified thermal characteristics before selecting copper area or cooling. Estimated: the temperature rise equals power dissipation multiplied by the applicable junction-to-ambient thermal resistance; obtain both values from the datasheet for the exact package and PCB construction. Validate with a worst-case ambient temperature, continuous processor load, and the external flash operating simultaneously.

Route high-speed external-memory signals as short, impedance-controlled connections on a multilayer board, with a continuous reference plane and appropriately placed series termination if recommended. Keep clock and data traces away from switching nodes and noisy regulators. Since the LPC1810FET100 is ROMless, boot quality depends on the complete path from external SPI flash through the MCU, making signal integrity and power sequencing part of system reliability.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The product listing does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm each declaration using the current NXP product documentation and applicable quality documentation before qualification.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LPC1810FET100 datasheet LPC1810FET100 datasheet pdf LPC1810FET100 pinout LPC1810FET100 footprint LPC1810FET100 equivalent LPC1810FET100 replacement LPC1810FET100 cross reference LPC1810FET100 vs LPC1813JET100E NXP LPC1810FET100 LPC1810FET100 price LPC1810FET100 stock LPC1810FET100 180MHz Cortex-M3 LPC1810FET100 TFBGA100 LPC1810FET100 CAN controller LPC1810FET100 application circuit

相關元件與詞彙

NXP Semiconductors LPC1810FET100 LPC1810FET100,551 LPC1811FET100 LPC1812FET100 LPC1813JET100E LPC1814FET100 LPC1815FET100 Arm Cortex-M3 Arm Cortex-M LPC18xx microcontroller MCU ROMless microcontroller embedded processor system-on-chip semiconductor 136 kB SRAM Quad SPI Flash Interface SPI Flash CAN 2.0B State Configurable Timer 100-TFBGA BGA surface mount 9 x 9 mm package industrial control CAN networking external nonvolatile memory firmware storage data acquisition sensor gateway communications equipment robotics RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情