NXP Semiconductors

LPC2141FBD64 - 60MHz ARM7 MCU, 32KB Flash | NXP

MPN: LPC2141FBD64 ✓ 啟用中
3.3 V Vdss 64-LQFP, 10 mm x 10 mm Package 60 MHz Speed 32 KB (32K x 8) Memory
MOQ: 1 |

LPC2141FBD64 概覽

NXP Semiconductors LPC2141FBD64 is an ARM7TDMI-S 16/32-bit microcontroller operating up to 60 MHz, with 32 KB of on-chip flash and 8 KB of SRAM in a 64-LQFP package. The device combines a 32-bit ARM7TDMI-S processor, USB 2.0 full-speed device support, serial interfaces, timers, and 10-bit analog conversion resources for embedded control systems.

An ARM7-based microcontroller is a single-chip processing platform that executes 32-bit instructions while supporting the wider ARM instruction set and embedded peripherals required for control applications. Within the product hierarchy, the LPC2141FBD64 is a microcontroller, or MCU, integrating a CPU core, memory, communication interfaces, timers, and analog peripherals on one integrated circuit.

The LPC2141FBD64 provides 32 KB of flash for program storage, 8 KB of SRAM for working memory, and a maximum CPU frequency of 60 MHz. Its USB 2.0 full-speed device interface supports direct USB connectivity, while the family also includes 10-bit ADC and DAC functions. The 64-LQFP package provides 64 terminals for external memory, communications, analog, timing, and control connections.

The ARM7TDMI-S architecture uses a 128-bit memory interface and an accelerator architecture intended to support maximum-rate 32-bit code execution. Real-time emulation and embedded trace support assist development and diagnostics. Multiple peripheral functions can share pins through configurable multiplexing, allowing designers to balance USB, serial communications, timers, analog inputs, and external memory interfaces against board-space constraints.

Typical implementations include USB-connected data acquisition equipment, industrial control modules, USB-to-serial or USB-to-protocol adapters, embedded test instruments, and legacy peripheral controllers. The device is especially relevant to systems that retain an ARM7 software base and require a compact LQFP footprint while adding a full-speed USB device interface.

Hardware design should begin with the manufacturer pin connection table and power requirements for the selected clock and peripheral configuration. Place decoupling capacitors close to the supply terminals, route USB data pairs as a controlled-impedance differential pair, and keep analog and high-current switching paths separated from sensitive signal pins. Firmware must configure pin multiplexing, clocks, and peripheral ownership before enabling the corresponding external functions.

This product record combines the manufacturer family specification with package, interface, memory, and sourcing details. It also provides drop-in family comparisons and application-oriented guidance covering USB connectivity, embedded control, data acquisition, and industrial equipment, helping engineers evaluate the LPC2141FBD64 without relying on a basic catalog summary alone.

直接替換替代品,適用於 LPC2141FBD64 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LPC2141FBD64 (相同外形與佔位) — 差異在於 Product Type, Flash Organization, Package, ADC Resolution, DAC Resolution.

NXP Semiconductors
Product Type: 16-bit/32-bit ARM7 microcontroller
Flash Organization: 64K x 8 bits
Package: 64-LQFP, 10 x 10 mm
比較對象 LPC2141FBD64 →
NXP Semiconductors
Product Type: ARM7TDMI-S 16-bit/32-bit microcontroller
Flash Organization: 128K x 8 bits
Package: 64-LQFP, 10 x 10 mm
比較對象 LPC2141FBD64 →
NXP Semiconductors
Product Type: Single-chip 16-bit/32-bit microcontroller
Flash Organization: 256K x 8
比較對象 LPC2141FBD64 →
NXP Semiconductors
Product Type: 16-bit/32-bit ARM7TDMI-S microcontroller
Flash Organization: 512K x 8 bit
比較對象 LPC2141FBD64 →

LPC2142FBD64

✅ 直接替換 ⚠️ 規格未經驗證
NXP Semiconductors
📦 64-LQFP (10x10 mm)
16-bit/32-bit ARM7 microcontroller · ARM7TDMI-S · 60 MHz · 64 KB · 16 KB · 64K x 8 bits · USB 2.0 full-speed device · 10 bits

聯絡詢價

查看資料表 →

LPC2144FBD64

✅ 直接替換 ⚠️ 規格未經驗證
NXP Semiconductors
📦 64-LQFP (10x10 mm)
ARM7TDMI-S 16-bit/32-bit microcontroller · 60 MHz · ARM7TDMI-S with 128-bit memory interface · 128 KB · 128K x 8 bits · 16 KB · USB 2.0 full-speed device · 10 bits

聯絡詢價

查看資料表 →

LPC2146FBD64

✅ 直接替換 ⚠️ 規格未經驗證
NXP Semiconductors
📦 64-LQFP (10x10 mm)
Single-chip 16-bit/32-bit microcontroller · ARM7TDMI-S · 60 MHz · 256 KB · 256K x 8 · ISP/IAP · USB 2.0 full-speed device · 10-bit

聯絡詢價

查看資料表 →

LPC2148FBD64

✅ 直接替換 ⚠️ 規格未經驗證
NXP Semiconductors
📦 64-LQFP (10x10 mm)
16-bit/32-bit ARM7TDMI-S microcontroller · 60 MHz · 512 kB · 512K x 8 bit · 40 kB · 10 bit · 10 bit · USB 2.0 full-speed device

聯絡詢價

查看資料表 →

LPC2141FBD64 最大額定值與電氣特性

Product Type 16/32-bit ARM7 microcontroller
CPU Core ARM7TDMI-S
Maximum CPU Frequency 60 MHz
On-Chip Flash 32 KB (32K x 8)
On-Chip SRAM 8 KB
Memory Interface Width 128 bit
USB Interface USB 2.0 full-speed device
ADC Resolution 10 bit
DAC Resolution 10 bit
Programming Support ISP and IAP
Debug Features Real-time emulation and embedded trace
封裝 64-LQFP, 10 mm x 10 mm
Terminal Pitch 0.5 mm
安裝類型 Surface mount
工作溫度範圍 -40 °C to +85 °C
供應電壓 3.3 V

LPC2141FBD64 64-lqfp, 10 mm x 10 mm 腳位配置指南

LPC2141FBD64(64-lqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

LPC2141FBD64 的 64-lqfp, 10 mm x 10 mm 封裝腳位圖

無詳細腳位定義資料: LPC2141FBD64.

請參閱 資料表 以查看完整腳位配置。

典型應用

LPC2141FBD64 適用於 6 應用s: USB Data-Acquisition Controller, Industrial USB Control Module, USB-to-Serial Protocol Adapter, Embedded Test and Measurement Instrument, USB-Connected Peripheral Controller, Medical and Laboratory Data Logger.

🖥️

USB Data-Acquisition Controller

The LPC2141FBD64 fits a USB-connected acquisition controller because its ARM7TDMI-S core operates up to 60 MHz while USB 2.0 full-speed device support handles direct host communication. Its 10-bit ADC and DAC resources can support mixed analog measurement and output functions. The 32 KB flash and 8 KB SRAM are suitable for compact protocol, control, and buffering firmware when the application does not require larger local storage. Designers should allocate USB D-plus and D-minus as a controlled-impedance pair, provide the required USB transceiver and termination network, and separate analog inputs from digital return currents. Firmware must configure the ADC channels, DAC output, clocks, and pin multiplexing before enabling data transfer.

🏭

Industrial USB Control Module

The LPC2141FBD64 is appropriate for a compact industrial USB control module that combines protocol handling, digital control, and status reporting. Its 60 MHz ARM7TDMI-S execution rate supports responsive real-time control, while 32 KB of flash and 8 KB of SRAM can hold the application and working state for a focused device. USB full-speed operation permits direct integration with host software without a separate communications processor. The -40 °C to +85 °C operating range supports industrial-temperature environments. A practical implementation should use controlled USB routing, local bulk decoupling, defined logic levels for external outputs, and firmware-based watchdog and fault handling for dependable operation on long-lived production equipment.

🌐

USB-to-Serial Protocol Adapter

The LPC2141FBD64 can implement a USB-to-serial protocol adapter because it combines full-speed USB device connectivity with the processing capacity and memory of a 60 MHz ARM7 MCU. Firmware can translate between USB commands and UART, SPI, or other serial protocols while maintaining timing and status feedback. The 32 KB flash capacity is sufficient for compact protocol stacks and device drivers, while 8 KB of SRAM can support command buffers. Engineers should use the manufacturer's pin connection table for alternate-function selection, provide robust level translation where required, and isolate USB routing from high-current outputs. Firmware should validate configuration descriptors, endpoint behavior, timeouts, and electrical protection before production release.

🔧

Embedded Test and Measurement Instrument

The LPC2141FBD64 is useful in embedded test and measurement instruments that require USB connectivity, real-time control, and analog signal handling. The 10-bit ADC supports basic level or waveform acquisition, while the DAC can generate control or calibration outputs. At up to 60 MHz, the ARM7TDMI-S core can manage sampling, command parsing, and host communication within the 32 KB flash and 8 KB SRAM limits. For accurate measurements, designers should use a stable reference, appropriate input conditioning, separate analog and digital grounding, and an analog layout that minimizes converter and USB-switching interference. Firmware should also include calibration, range selection, overrun handling, and diagnostic reporting.

🔌

USB-Connected Peripheral Controller

The LPC2141FBD64 can serve as the central controller in a USB-connected peripheral that combines configuration, monitoring, and local real-time functions. Its ARM7TDMI-S core provides more than enough instruction throughput for peripheral management, while the USB 2.0 full-speed interface enables enumeration and control from a host. The compact 64-LQFP footprint supports multilayer or dense industrial-control boards, and the 8 KB SRAM is adequate for short command and status buffers. Firmware should implement a stable descriptor, explicit endpoint limits, watchdog recovery, and brownout-aware initialization. Hardware should reserve programming access and debug signals, preserve USB impedance continuity, and provide local filtering wherever external relays, motors, or heaters can inject noise.

💊

Medical and Laboratory Data Logger

The LPC2141FBD64 is suitable for a laboratory or medical-adjacent data logger when the design requires local control and USB export of measurements. The 10-bit ADC supports low-to-moderate-resolution sensing, and the 60 MHz core can manage sampling schedules, sensor conditioning, event logging, and host communication. Its -40 °C to +85 °C operating range supports many instrument environments, although medical-system qualification requirements remain application-specific. Designers should use isolated or appropriately protected sensor inputs, maintain defined grounding between analog and USB sections, and prevent patient-connected circuits from sharing noisy power paths with the MCU. Firmware should include timestamped records, integrity checks, safe configuration storage, and controlled USB enumeration.

What are the key specifications of LPC2141FBD64 that engineers should know?
The LPC2141FBD64 is an ARM7TDMI-S microcontroller rated up to 60 MHz with 32 KB of flash, 8 KB of SRAM, USB 2.0 full-speed device support, and a 64-LQFP package. According to the NXP LPC2141/42/44/46/48 datasheet, the device also includes 10-bit ADC and DAC functions, ISP/IAP programming support, a 128-bit memory interface, real-time emulation, and embedded trace capabilities.
What is the operating voltage of LPC2141FBD64?
The LPC2141FBD64 operates from a 3.3 V supply in its specified operating configuration. The LPC2141/42/44/46/48 family datasheet is the controlling document for supply-voltage limits, clock requirements, decoupling, and power sequencing. Confirm the complete operating limits against the relevant power pins and peripheral configuration before releasing the PCB design.
Where can I download the LPC2141FBD64 datasheet PDF?
The official LPC2141FBD64 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC2141_42_44_46_48.pdf. It covers the LPC2141/42/44/46/48 family, including the ARM7TDMI-S CPU, memory architecture, USB device interface, analog peripherals, pin multiplexing, electrical characteristics, package information, and application guidance.
Where can I find the LPC2141FBD64 pinout?
The LPC2141FBD64 pinout is documented in the pin connection section and package drawings of the NXP LPC2141/42/44/46/48 family datasheet. The device uses a 64-LQFP package with 0.5 mm terminal pitch and 10 mm by 10 mm body dimensions. Use the pin connection table when assigning multiplexed USB, serial, timer, analog, and external-memory functions.
What memory and clock resources does LPC2141FBD64 provide?
The LPC2141FBD64 provides 32 KB of on-chip flash, 8 KB of SRAM, and operation up to 60 MHz. According to the NXP family datasheet, a 128-bit memory interface and accelerator architecture support high-rate 32-bit instruction execution. These resources suit compact embedded-control, USB-device, data-acquisition, and legacy ARM7 industrial designs.
Can LPC2141FBD64 be used for a USB data-acquisition device?
Yes, the LPC2141FBD64 is suitable for a compact USB data-acquisition device because it combines a USB 2.0 full-speed device interface with a 60 MHz ARM7TDMI-S core and 10-bit ADC/DAC resources. The design must allocate pins for USB data and clock, analog inputs, voltage references, clocking, and programming access, then configure each multiplexed peripheral in firmware.
LPC2141FBD64 vs LPC2142FBD64 — which is better for a USB controller?
The LPC2141FBD64 is the better choice when 32 KB of flash and 8 KB of SRAM are sufficient, while the LPC2142FBD64 provides more program and working memory within the same LPC2100 family and LQFP64 footprint. Both use the ARM7TDMI-S architecture and support USB 2.0 full-speed device operation, so the deciding factors are memory demand, peripheral availability, and software fit.
LPC2141FBD64 vs LPC2148FBD64 — which MCU should be selected?
The LPC2141FBD64 is the appropriate choice for a memory-constrained USB peripheral requiring up to 60 MHz execution and relatively modest embedded resources. The LPC2148FBD64 belongs to the same ARM7 family and offers substantially more flash and SRAM, making it preferable for larger protocols, buffering, or more demanding control code. The exact package suffix must also be matched before treating either device as a direct replacement.
When should I choose LPC2141FBD64 over LPC2142FBD64?
Choose LPC2141FBD64 when the application fits comfortably within 32 KB of flash and 8 KB of SRAM and the added memory of LPC2142FBD64 would not be required. The LPC2141 retains the ARM7TDMI-S core, 60 MHz maximum operating frequency, USB 2.0 full-speed device support, and 64-LQFP package, making it efficient for focused USB control and data-acquisition designs.
Is LPC2141FBD64 suitable for industrial automation equipment?
The LPC2141FBD64 is suitable for many industrial automation and legacy embedded-control applications because it combines a 60 MHz ARM7 core, 32 KB flash, 8 KB SRAM, USB full-speed device support, and serial-control peripherals. Its specified -40 °C to +85 °C operating range supports industrial-temperature designs, although the complete electrical, EMC, and lifetime requirements must also be verified for the finished equipment.
What can replace LPC2141FBD64 without changing the PCB footprint?
The closest pin-compatible choices are LPC2142FBD64, LPC2144FBD64, LPC2146FBD64, and LPC2148FBD64, all from the same NXP LPC2100 family and specified in 64-LQFP packages. Replacement requires checking memory capacity, peripheral availability, pin multiplexing, firmware support, and operating requirements because these family members are not identical in every resource.
Where can I buy LPC2141FBD64 online?
Use the Request a Quote form on this XAIPART page to request LPC2141FBD64 availability, current lead time, and an order quotation. The form can be used for one-piece evaluation quantities, production requirements, and schedule inquiries. XAIPART will confirm the exact LPC2141FBD64 ordering code and supply details directly through the quotation process.
What is the price of LPC2141FBD64?
Use the Request a Quote form on this XAIPART page for the current LPC2141FBD64 price and volume availability. The quotation can reflect the requested quantity, package form, delivery schedule, and current market conditions. This avoids presenting an outdated catalog price as a current purchasing commitment.
What is the lead time for LPC2141FBD64?
The current LPC2141FBD64 lead time should be requested through the Request a Quote form on this page. Include the required quantity, target date, approved source needs, and whether the order is for prototype, qualification, or production. XAIPART can then confirm the current schedule and order form for the exact device.
Is LPC2141FBD64 currently in stock?
Current LPC2141FBD64 stock status should be confirmed through the Request a Quote form on this XAIPART page. Include your required quantity and delivery date so the response can distinguish available production quantities from scheduled procurement or manufacturer lead time. The exact LPC2141FBD64 designation must be retained in the resulting quotation.
What programming and debugging tools support LPC2141FBD64?
The LPC2141FBD64 supports ISP and IAP programming and includes the ARM7TDMI-S real-time emulation and embedded trace features described by NXP. The LPC2141/42/44/46/48 datasheet provides the architectural and peripheral information needed to connect a compatible debugger, loader, or boot interface. Choose tooling that supports the selected LPC2141 device, package, flash organization, and clock configuration.

工程參考資料,適用於 LPC2141FBD64 — 比較、設計指引及合規資訊。

選型指南

Choose LPC2141FBD64 for a compact ARM7-based USB device when 32 KB of flash and 8 KB of SRAM are sufficient and the application does not need the larger memory or expanded peripheral resources of the higher LPC214x members. Its 60 MHz ARM7TDMI-S core, 10-bit ADC/DAC, USB full-speed device interface, and 64-LQFP package form a focused platform for data acquisition, protocol adapters, and industrial control modules. Select LPC2142FBD64 for moderate additional memory needs, LPC2144FBD64 or LPC2146FBD64 for larger firmware and peripheral requirements, and LPC2148FBD64 for the highest memory capacity in the family. For any substitution, verify package suffix, pin multiplexing, interrupt configuration, peripheral availability, device headers, linker memory regions, and the operating limits in the NXP datasheet before production use.

與替代品比較

參數 本產品 LPC2142FBD64 LPC2144FBD64 LPC2146FBD64 LPC2148FBD64
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) - same package family 64-LQFP (10x10 mm) - same package family 64-LQFP (10x10 mm) - same package family 64-LQFP (10x10 mm) - same package family
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 60 MHz 60 MHz 60 MHz 60 MHz 60 MHz
On-Chip Flash 32 KB (32K x 8) 64 KB 128 KB 256 KB 512 KB
On-Chip SRAM 8 KB 16 KB 32 KB 32 KB 32 KB
USB Interface USB 2.0 full-speed device USB 2.0 full-speed device USB 2.0 full-speed device USB 2.0 full-speed device USB 2.0 full-speed device
ADC Resolution 10 bit 10 bit 10 bit 10 bit 10 bit
DAC Resolution 10 bit 10 bit 10 bit 10 bit 10 bit
Programming Support ISP and IAP ISP and IAP ISP and IAP ISP and IAP ISP and IAP
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

主要差異化特點

  • Lowest memory configuration in the compared LPC2100 family (對比LPC2142FBD64)
  • Same 60 MHz ARM7TDMI-S performance class (對比LPC2148FBD64)
  • USB full-speed integration in the same 64-LQFP footprint (對比LPC2146FBD64)
  • Integrated 10-bit conversion resources (對比LPC2144FBD64)

設計說明

Assign every multiplexed signal from the NXP pin connection table before routing the PCB. Reserve the USB D-plus and D-minus pair as a short, continuous, controlled-impedance route, and place its protection or transceiver circuitry close to the connector. Keep the 0.5 mm-pitch LQFP escape paths short, provide adequate fanout around the MCU, and route clocks away from USB data and analog inputs.

Implement the decoupling network exactly as specified in the family datasheet and place the required capacitors adjacent to the relevant supply pins. Verify startup current, peripheral load, voltage tolerance, and sequencing at the maximum intended clock. The 3.3 V operating supply should have low impedance over the USB traffic and analog-conversion activity; separate noisy load currents from sensitive return paths to prevent transient ground potential differences from corrupting measurements.

Do not treat another LPC2100 family member as an automatic firmware-compatible replacement. Although the compared devices share the 64-LQFP family footprint and ARM7TDMI-S architecture, flash size, SRAM size, peripheral availability, interrupt vectors, and multiplexed pin functions can differ. Review the linker configuration, startup code, device header, pin table, and peripheral assignments before substituting LPC2142FBD64, LPC2144FBD64, LPC2146FBD64, or LPC2148FBD64.

For analog measurements, use the 10-bit ADC with a stable reference, suitable source impedance, and an acquisition strategy appropriate for the LPC2141 ADC interface. Keep analog traces away from USB switching edges, clock lines, and relay or motor drive paths. If the USB bus cable can introduce large ground offsets, add appropriate isolation or protection; otherwise shared-ground return currents may create measurement errors that cannot be corrected entirely in software.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The product family is specified for industrial-temperature operation from -40 °C to +85 °C and a 3.3 V supply. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.

相關搜尋

LPC2141FBD64 datasheet LPC2141FBD64 datasheet pdf LPC2141FBD64 pinout LPC2141FBD64 specifications LPC2141FBD64 LQFP64 LPC2141FBD64 ARM7TDMI-S LPC2141FBD64 USB controller LPC2141FBD64 equivalent LPC2141FBD64 replacement LPC2141FBD64 vs LPC2142FBD64 LPC2141FBD64 footprint NXP LPC2141FBD64 LPC2141FBD64 price LPC2141FBD64 stock

相關元件與詞彙

NXP Semiconductors LPC2141FBD64 LPC2142FBD64 LPC2144FBD64 LPC2146FBD64 LPC2148FBD64 ARM7TDMI-S ARM7 microcontroller MCU single-chip controller embedded processor semiconductor 32 KB flash 8 KB SRAM 60 MHz USB 2.0 full-speed device 10-bit ADC 10-bit DAC ISP IAP 64-LQFP LQFP family surface mount industrial control USB data acquisition
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情