LPC2141FBD64 - 60MHz ARM7 MCU, 32KB Flash | NXP
Teilenummer: LPC2141FBD64 ✓ AktivLPC2141FBD64 Übersicht
An ARM7-based microcontroller is a single-chip processing platform that executes 32-bit instructions while supporting the wider ARM instruction set and embedded peripherals required for control applications. Within the product hierarchy, the LPC2141FBD64 is a microcontroller, or MCU, integrating a CPU core, memory, communication interfaces, timers, and analog peripherals on one integrated circuit.
The LPC2141FBD64 provides 32 KB of flash for program storage, 8 KB of SRAM for working memory, and a maximum CPU frequency of 60 MHz. Its USB 2.0 full-speed device interface supports direct USB connectivity, while the family also includes 10-bit ADC and DAC functions. The 64-LQFP package provides 64 terminals for external memory, communications, analog, timing, and control connections.
The ARM7TDMI-S architecture uses a 128-bit memory interface and an accelerator architecture intended to support maximum-rate 32-bit code execution. Real-time emulation and embedded trace support assist development and diagnostics. Multiple peripheral functions can share pins through configurable multiplexing, allowing designers to balance USB, serial communications, timers, analog inputs, and external memory interfaces against board-space constraints.
Typical implementations include USB-connected data acquisition equipment, industrial control modules, USB-to-serial or USB-to-protocol adapters, embedded test instruments, and legacy peripheral controllers. The device is especially relevant to systems that retain an ARM7 software base and require a compact LQFP footprint while adding a full-speed USB device interface.
Hardware design should begin with the manufacturer pin connection table and power requirements for the selected clock and peripheral configuration. Place decoupling capacitors close to the supply terminals, route USB data pairs as a controlled-impedance differential pair, and keep analog and high-current switching paths separated from sensitive signal pins. Firmware must configure pin multiplexing, clocks, and peripheral ownership before enabling the corresponding external functions.
This product record combines the manufacturer family specification with package, interface, memory, and sourcing details. It also provides drop-in family comparisons and application-oriented guidance covering USB connectivity, embedded control, data acquisition, and industrial equipment, helping engineers evaluate the LPC2141FBD64 without relying on a basic catalog summary alone.
Drop-in-Alternativen für LPC2141FBD64 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LPC2141FBD64 (gleiche Bauform und Footprint) – abweichend in Product Type, Flash Organization, Package, ADC Resolution, DAC Resolution.
LPC2142FBD64
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LPC2144FBD64
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LPC2146FBD64
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LPC2148FBD64
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LPC2141FBD64 Grenzwerte & elektrische Eigenschaften
| Product Type | 16/32-bit ARM7 microcontroller |
| CPU Core | ARM7TDMI-S |
| Maximum CPU Frequency | 60 MHz |
| On-Chip Flash | 32 KB (32K x 8) |
| On-Chip SRAM | 8 KB |
| Memory Interface Width | 128 bit |
| USB Interface | USB 2.0 full-speed device |
| ADC Resolution | 10 bit |
| DAC Resolution | 10 bit |
| Programming Support | ISP and IAP |
| Debug Features | Real-time emulation and embedded trace |
| Gehäuse | 64-LQFP, 10 mm x 10 mm |
| Terminal Pitch | 0.5 mm |
| Montageart | Surface mount |
| Betriebstemperaturbereich | -40 °C to +85 °C |
| Versorgungsspannung | 3.3 V |
LPC2141FBD64 64-lqfp, 10 mm x 10 mm Pinbelegungsleitfaden
Pinbelegung für LPC2141FBD64 (64-lqfp, 10 mm x 10 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für LPC2141FBD64.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LPC2141FBD64 ist geeignet für 6 Anwendungs: USB Data-Acquisition Controller, Industrial USB Control Module, USB-to-Serial Protocol Adapter, Embedded Test and Measurement Instrument, USB-Connected Peripheral Controller, Medical and Laboratory Data Logger.
USB Data-Acquisition Controller
The LPC2141FBD64 fits a USB-connected acquisition controller because its ARM7TDMI-S core operates up to 60 MHz while USB 2.0 full-speed device support handles direct host communication. Its 10-bit ADC and DAC resources can support mixed analog measurement and output functions. The 32 KB flash and 8 KB SRAM are suitable for compact protocol, control, and buffering firmware when the application does not require larger local storage. Designers should allocate USB D-plus and D-minus as a controlled-impedance pair, provide the required USB transceiver and termination network, and separate analog inputs from digital return currents. Firmware must configure the ADC channels, DAC output, clocks, and pin multiplexing before enabling data transfer.
Empfohlen
Industrial USB Control Module
The LPC2141FBD64 is appropriate for a compact industrial USB control module that combines protocol handling, digital control, and status reporting. Its 60 MHz ARM7TDMI-S execution rate supports responsive real-time control, while 32 KB of flash and 8 KB of SRAM can hold the application and working state for a focused device. USB full-speed operation permits direct integration with host software without a separate communications processor. The -40 °C to +85 °C operating range supports industrial-temperature environments. A practical implementation should use controlled USB routing, local bulk decoupling, defined logic levels for external outputs, and firmware-based watchdog and fault handling for dependable operation on long-lived production equipment.
Empfohlen
USB-to-Serial Protocol Adapter
The LPC2141FBD64 can implement a USB-to-serial protocol adapter because it combines full-speed USB device connectivity with the processing capacity and memory of a 60 MHz ARM7 MCU. Firmware can translate between USB commands and UART, SPI, or other serial protocols while maintaining timing and status feedback. The 32 KB flash capacity is sufficient for compact protocol stacks and device drivers, while 8 KB of SRAM can support command buffers. Engineers should use the manufacturer's pin connection table for alternate-function selection, provide robust level translation where required, and isolate USB routing from high-current outputs. Firmware should validate configuration descriptors, endpoint behavior, timeouts, and electrical protection before production release.
Empfohlen
Embedded Test and Measurement Instrument
The LPC2141FBD64 is useful in embedded test and measurement instruments that require USB connectivity, real-time control, and analog signal handling. The 10-bit ADC supports basic level or waveform acquisition, while the DAC can generate control or calibration outputs. At up to 60 MHz, the ARM7TDMI-S core can manage sampling, command parsing, and host communication within the 32 KB flash and 8 KB SRAM limits. For accurate measurements, designers should use a stable reference, appropriate input conditioning, separate analog and digital grounding, and an analog layout that minimizes converter and USB-switching interference. Firmware should also include calibration, range selection, overrun handling, and diagnostic reporting.
Empfohlen
USB-Connected Peripheral Controller
The LPC2141FBD64 can serve as the central controller in a USB-connected peripheral that combines configuration, monitoring, and local real-time functions. Its ARM7TDMI-S core provides more than enough instruction throughput for peripheral management, while the USB 2.0 full-speed interface enables enumeration and control from a host. The compact 64-LQFP footprint supports multilayer or dense industrial-control boards, and the 8 KB SRAM is adequate for short command and status buffers. Firmware should implement a stable descriptor, explicit endpoint limits, watchdog recovery, and brownout-aware initialization. Hardware should reserve programming access and debug signals, preserve USB impedance continuity, and provide local filtering wherever external relays, motors, or heaters can inject noise.
Empfohlen
Medical and Laboratory Data Logger
The LPC2141FBD64 is suitable for a laboratory or medical-adjacent data logger when the design requires local control and USB export of measurements. The 10-bit ADC supports low-to-moderate-resolution sensing, and the 60 MHz core can manage sampling schedules, sensor conditioning, event logging, and host communication. Its -40 °C to +85 °C operating range supports many instrument environments, although medical-system qualification requirements remain application-specific. Designers should use isolated or appropriately protected sensor inputs, maintain defined grounding between analog and USB sections, and prevent patient-connected circuits from sharing noisy power paths with the MCU. Firmware should include timestamped records, integrity checks, safe configuration storage, and controlled USB enumeration.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LPC2141FBD64 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LPC2142FBD64 | LPC2144FBD64 | LPC2146FBD64 | LPC2148FBD64 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same package family | 64-LQFP (10x10 mm) - same package family | 64-LQFP (10x10 mm) - same package family | 64-LQFP (10x10 mm) - same package family |
| CPU Core | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| On-Chip Flash | 32 KB (32K x 8) | 64 KB | 128 KB | 256 KB | 512 KB |
| On-Chip SRAM | 8 KB | 16 KB | 32 KB | 32 KB | 32 KB |
| USB Interface | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device | USB 2.0 full-speed device |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| DAC Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Programming Support | ISP and IAP | ISP and IAP | ISP and IAP | ISP and IAP | ISP and IAP |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Wichtigste Unterscheidungsmerkmale
- Lowest memory configuration in the compared LPC2100 family (vs. LPC2142FBD64)
- Same 60 MHz ARM7TDMI-S performance class (vs. LPC2148FBD64)
- USB full-speed integration in the same 64-LQFP footprint (vs. LPC2146FBD64)
- Integrated 10-bit conversion resources (vs. LPC2144FBD64)
Designhinweise
Assign every multiplexed signal from the NXP pin connection table before routing the PCB. Reserve the USB D-plus and D-minus pair as a short, continuous, controlled-impedance route, and place its protection or transceiver circuitry close to the connector. Keep the 0.5 mm-pitch LQFP escape paths short, provide adequate fanout around the MCU, and route clocks away from USB data and analog inputs.
Implement the decoupling network exactly as specified in the family datasheet and place the required capacitors adjacent to the relevant supply pins. Verify startup current, peripheral load, voltage tolerance, and sequencing at the maximum intended clock. The 3.3 V operating supply should have low impedance over the USB traffic and analog-conversion activity; separate noisy load currents from sensitive return paths to prevent transient ground potential differences from corrupting measurements.
Do not treat another LPC2100 family member as an automatic firmware-compatible replacement. Although the compared devices share the 64-LQFP family footprint and ARM7TDMI-S architecture, flash size, SRAM size, peripheral availability, interrupt vectors, and multiplexed pin functions can differ. Review the linker configuration, startup code, device header, pin table, and peripheral assignments before substituting LPC2142FBD64, LPC2144FBD64, LPC2146FBD64, or LPC2148FBD64.
For analog measurements, use the 10-bit ADC with a stable reference, suitable source impedance, and an acquisition strategy appropriate for the LPC2141 ADC interface. Keep analog traces away from USB switching edges, clock lines, and relay or motor drive paths. If the USB bus cable can introduce large ground offsets, add appropriate isolation or protection; otherwise shared-ground return currents may create measurement errors that cannot be corrected entirely in software.
Compliance-Informationen
The product family is specified for industrial-temperature operation from -40 °C to +85 °C and a 3.3 V supply. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.