Analog Devices

LT1213CS8 - 28MHz Dual Precision Op Amp | Analog Devices

MPN: LT1213CS8 ✓ 啟用中
Single supply Vdss 8-SO, SOIC-8 Package
MOQ: 1 |

LT1213CS8 概覽

The Analog Devices LT1213CS8 is a dual, single-supply precision operational amplifier with a 28 MHz gain-bandwidth product, a 12 V/us slew rate, and an 8-lead SOIC package. Two independent amplifier channels are integrated into one package, allowing compact dual-stage, differential, or multi-signal conditioning designs. Its 500 ns typical settling time for a 2 V step and 1.1 us typical settling time for a 10 V step support accurate response to rapidly changing analog signals.

A precision operational amplifier is a voltage-feedback amplifier designed to provide high open-loop gain, low offset error, and accurate signal amplification around a defined reference point. The LT1213 belongs to the operational-amplifier hierarchy, combining precision DC behavior with wide bandwidth and fast slew capability. It is therefore positioned between general-purpose amplifiers and specialized high-speed amplifiers rather than being limited to slow precision-only applications.

The LT1213's principal performance characteristics include a 28 MHz typical gain-bandwidth product, 12 V/us typical slew rate, and fast settling performance. These figures indicate that the device can provide useful closed-loop bandwidth well above audio frequencies while also preserving the low DC-error characteristics expected from a precision amplifier. The Analog Devices product description specifically identifies the LT1213 as a single-supply precision op amp, while the LT1214 is the quad version of the same amplifier family.

The LT1213 uses conventional voltage-feedback operation, making its implementation compatible with standard inverting, non-inverting, summing, and difference-amplifier topologies. Its combination of speed and precision is valuable when a signal requires both accurate DC-level control and rapid transitions, such as active filtering, signal conditioning, data acquisition, and feedback control. The two-channel configuration also reduces package count when an application needs matched functional stages rather than two unrelated amplifiers.

Typical uses include precision active filters, low-level sensor signal conditioning, instrumentation buffering, servo or feedback loops, and dual-channel analog processing. Its 28 MHz bandwidth provides margin for higher-frequency closed-loop operation, while the 12 V/us slew rate limits large-signal distortion in fast transient paths. Designers should still verify output swing, input range, supply limits, and stability against the manufacturer datasheet for the exact operating conditions.

Layout should keep input and feedback traces short, place compensation and decoupling components close to the associated pins, and avoid routing sensitive inputs beside high-current switching nodes. Because the CS suffix identifies a temperature-grade variant while the 8-SO package constrains board area, PCB footprint selection and thermal verification should occur together. The manufacturer datasheet and pin-description table remain the controlling references for electrical limits and package details.

This product page combines the manufacturer-defined 28 MHz bandwidth and 12 V/us slew rate with ordering distinctions, package information, application guidance, and engineering-focused replacement analysis. It highlights where the LT1213CS8 is suitable, which electrical details still require confirmation, and how engineers should evaluate a replacement without changing the surrounding precision signal-chain design.

直接替換替代品,適用於 LT1213CS8 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

LT1213CN8

✅ 直接替換 ⚠️ 規格未經驗證
📦 SOIC-8
Same 28 MHz gain-bandwidth product and 12 V/us slew rate, a 0% difference in both headline AC ratings; the ordering suffix indicates a different temperature grade.

📋 參考替代品(不在目錄中)

LT1213IS8

✅ 直接替換 ⚠️ 規格未經驗證
📦 SOIC-8
Same 28 MHz gain-bandwidth product and 12 V/us slew rate, a 0% difference in both headline AC ratings; the ordering suffix indicates a different temperature grade.

📋 參考替代品(不在目錄中)

LT1213CS8#PBF

✅ 直接替換
📦 SOIC-8
Identical 28 MHz gain-bandwidth product, 12 V/us slew rate, and 8-SO electrical configuration, with a 0% difference in headline AC ratings; the ordering code identifies the lead-free orderable designation.

📋 參考替代品(不在目錄中)

LT1213CS8 最大額定值與電氣特性

Amplifier Type Precision voltage-feedback operational amplifier
Number of Channels 2 channels
Architecture Dual amplifier
Supply Type Single supply
Gain-Bandwidth Product 28 MHz typical
Slew Rate 12 V/us typical
Settling Time, 2 V Step to 0.01% 500 ns typical
Settling Time, 10 V Step to 1 mV 1.1 us typical
封裝 8-SO, SOIC-8
腳位數 8 pins
安裝類型 Surface mount
Application Classification Standard general-purpose amplifier

LT1213CS8 腳位配置

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
腳位 1 OUT A — Output of amplifier A
腳位 2 -IN A — Inverting input of amplifier A
腳位 3 +IN A — Non-inverting input of amplifier A
腳位 4 V- — Negative supply connection
腳位 5 +IN B — Non-inverting input of amplifier B
腳位 6 -IN B — Inverting input of amplifier B
腳位 7 OUT B — Output of amplifier B
腳位 8 V+ — Positive supply connection

典型應用

LT1213CS8 適用於 6 應用s: Precision Active Filtering, Instrumentation Signal Conditioning, Data Acquisition Front Ends, Servo and Feedback Control, Low-Level Sensor Buffering, Analog Test and Measurement.

🔧

Precision Active Filtering

The LT1213CS8 fits precision active-filter stages requiring more bandwidth than a slow instrumentation-oriented amplifier. Its 28 MHz typical gain-bandwidth product provides closed-loop bandwidth margin, while the 12 V/us typical slew rate improves response to larger filter transitions. The dual amplifier can implement two active poles or coordinated filter sections within one 8-SO package. Use the manufacturer datasheet to confirm noise, gain-bandwidth behavior, output swing, and stability for the selected topology.

🏭

Instrumentation Signal Conditioning

The LT1213CS8 is useful for buffering and amplifying low-level instrumentation signals where both DC precision and useful bandwidth matter. Two independent channels can support differential signal conditioning, sensor buffering, or successive analog stages in a compact 8-SO footprint. The 28 MHz typical gain-bandwidth product and 12 V/us typical slew rate provide response margin beyond low-frequency measurement systems. Confirm input common-mode range, offset voltage, bias current, and output swing before finalizing the signal path.

📡

Data Acquisition Front Ends

The LT1213CS8 can form the fast analog input stage of a data-acquisition system when sensor outputs require amplification before sampling. Its 28 MHz typical gain-bandwidth product is substantially faster than a low-frequency precision-only device, and the 12 V/us typical slew rate supports rapid input transitions. The dual arrangement can process two channels or provide buffering and gain in one package. Validate settling against the sampling rate and verify ADC interface limits in the manufacturer datasheet.

⚡

Servo and Feedback Control

The LT1213CS8 suits servo, feedback, and control loops that require faster settling than a conventional precision op amp while retaining accurate DC amplification. Its 500 ns typical settling time for a 2 V step to 0.01% and 12 V/us typical slew rate help reduce response delay in feedback networks. Two channels can implement an error amplifier plus an output buffer or a related control function. Check unity-gain stability, load capability, and output-current limits for the selected feedback topology.

🧩

Low-Level Sensor Buffering

The LT1213CS8 provides two channels for buffering sensor outputs where amplitude accuracy, offset behavior, and transient response must coexist. Its 28 MHz typical gain-bandwidth product avoids imposing an unnecessarily narrow bandwidth on the signal path, while the 12 V/us typical slew rate helps preserve large-signal fidelity. The device is suitable for resistive, bridge, and general low-level analog stages after confirming input bias current, common-mode range, noise, and output capability.

📺

Analog Test and Measurement

The LT1213CS8 can support fast analog test and measurement paths that require accurate low-level amplification without a very slow amplifier response. The 28 MHz typical gain-bandwidth product and 12 V/us typical slew rate are useful in attenuator, buffer, and differential conditioning circuits driven by moderate-bandwidth sources. The dual package can reduce board area by consolidating two functions. Verify offset, noise, input range, output swing, and settling against the test system's accuracy and bandwidth requirements.

推薦產品摘要

LT1213CN8 Same-family dual precision op amp for a second temperature-grade option 用於: Precision Active Filtering, Instrumentation Signal Conditioning, Servo and Feedback Control, Low-Level Sensor Buffering, Analog Test and Measurement LT1213IS8 Same-family dual precision op amp with alternate temperature-grade designation 用於: Precision Active Filtering, Instrumentation Signal Conditioning, Data Acquisition Front Ends, Servo and Feedback Control, Low-Level Sensor Buffering LT1213CS8#PBF Lead-free ordering designation for the same dual precision amplifier 用於: Data Acquisition Front Ends, Analog Test and Measurement
What is the LT1213CS8?
The LT1213CS8 is a dual, single-supply precision operational amplifier from Analog Devices packaged in an 8-lead SOIC. It combines a 28 MHz typical gain-bandwidth product with a 12 V/us typical slew rate, allowing two independent precision amplifier channels to be placed on one compact device. According to the Analog Devices LT1213 product page, the LT1214 is the equivalent quad-channel member of the same amplifier family.
What are the key specifications of LT1213CS8 that engineers should know?
The LT1213CS8 provides two amplifier channels, a 28 MHz typical gain-bandwidth product, a 12 V/us typical slew rate, and single-supply operation in an 8-SO package. Its published settling figures include 500 ns typical for a 2 V step to 0.01% and 1.1 us typical for a 10 V step to 1 mV. These characteristics position the device between general-purpose amplifiers and higher-speed precision signal-chain parts.
What is the gain-bandwidth product of the LT1213CS8?
The LT1213CS8 has a 28 MHz typical gain-bandwidth product. Gain-bandwidth product indicates the approximate closed-loop bandwidth available at unity gain before bandwidth and stability constraints become important. According to the Analog Devices LT1213 product page, this 28 MHz value distinguishes the LT1213 as a speed-oriented precision op amp rather than a conventional low-bandwidth instrumentation amplifier.
What slew rate does the LT1213CS8 provide?
The LT1213CS8 provides a 12 V/us typical slew rate, as stated by Analog Devices. Slew rate describes how quickly the output can move through a specified voltage change, making this figure important for large-signal response, full-power-bandwidth behavior, and pulse or transient handling. The value should be checked against signal amplitude and required settling time in the final operating condition.
Where can I download the LT1213CS8 datasheet PDF?
The official LT1213 product page on Analog Devices is the appropriate starting point for the datasheet and related documentation. It identifies the LT1213 as a dual, single-supply precision op amp with 28 MHz gain-bandwidth product and 12 V/us slew rate. Use the manufacturer's LT1213 page to obtain the current datasheet PDF and verify the CS temperature grade, electrical limits, pin descriptions, and recommended operating conditions.
Where can I find the LT1213CS8 pinout?
The LT1213CS8 pinout is defined by the pin-description table in the Analog Devices LT1213 datasheet. The device uses an 8-SO package with two complete operational-amplifier channels, power connections, and input and output pins for each channel. Assign PCB nets from the package drawing and pin table so that orientation, exposed connectivity, and the CS variant are checked against the exact ordering code.
Is LT1213CS8 suitable for precision active filters?
Yes, the LT1213CS8 is suitable for precision active filters that benefit from both DC accuracy and substantial bandwidth. Its 28 MHz typical gain-bandwidth product supports higher closed-loop frequencies than a slow precision-only op amp, while the 12 V/us typical slew rate improves large-signal transient response. Filter stability, resistor matching, noise, input range, and output swing must still be evaluated for the selected topology.
LT1213CS8 vs LT1214: which amplifier should I choose?
Choose the LT1213CS8 when the design needs two amplifier channels in an 8-SO package, and choose the LT1214 when four channels are required. The Analog Devices product page describes both as members of the same dual/quad precision family, while identifying the LT1213 as the dual version. Pin count, package size, channel count, and PCB footprint differ, so the LT1214 is not a pin-to-pin drop-in replacement for the LT1213CS8.
When should I choose LT1213CS8 over a general-purpose dual op amp?
Choose the LT1213CS8 when the design benefits from a 28 MHz typical gain-bandwidth product, a 12 V/us typical slew rate, and precision DC behavior in a dual 8-SO package. A general-purpose dual amplifier may be adequate for slower low-frequency stages, but it can reduce bandwidth or large-signal response. Confirm input offset, noise, bias current, supply range, and output swing against the manufacturer datasheet before selecting the LT1213.
What can replace the LT1213CS8?
A direct replacement must preserve the 8-SO footprint, two-channel topology, pin assignments, and critical performance ratings of the LT1213CS8. Same-family CS8, CN8, and IS8 ordering variants can provide useful temperature-grade choices, but each requires datasheet verification before substitution. Cross-brand alternatives should be accepted only after checking bandwidth, slew rate, offset, bias current, supply range, stability, and pin compatibility.
Is LT1213CS8 the same as LT1213CS8#PBF?
LT1213CS8#PBF is an ordering designation for the LT1213CS8 with the manufacturer's #PBF ordering code, rather than a different amplifier architecture. The LT1213CS8 and LT1213CS8#PBF listing identify the same dual precision op amp family in an 8-SO package. Purchasing teams should preserve the exact suffix when procurement requires lead-free or specific package-ordering attributes.
What is the difference between LT1213CS8 and LT1213CS8#TRPBF?
The primary ordering distinction is the #TRPBF suffix, which identifies a specific lead-free ordering and tape-and-reel presentation of the LT1213CS8 family. The underlying device remains a dual precision op amp with a 28 MHz typical gain-bandwidth product and a 12 V/us typical slew rate. Engineers should confirm that the electrical grade and 8-SO footprint are unchanged and that the reel format suits the assembly process.
Where can I buy LT1213CS8 online?
Use the Request a Quote form on this page to request current LT1213CS8 availability, order quantity, and delivery information. The part is identified as an 8-SO dual precision op amp from Analog Devices, with ordering variants including LT1213CS8#PBF and LT1213CS8#TRPBF. The form allows procurement to confirm the exact suffix, package presentation, quantity, and lead time without relying on a static listing.
What is the price of the LT1213CS8?
Current LT1213CS8 pricing depends on the exact ordering suffix, quantity, and requested delivery terms. Use the Request a Quote form on this page for a current quotation and volume-break review. The selected device is a dual, single-supply precision op amp with a 28 MHz typical gain-bandwidth product in an 8-SO package; provide the required suffix and quantities when submitting the request.
What is the lead time and stock status for LT1213CS8?
Current stock and lead time should be confirmed through the Request a Quote form on this page for the exact ordering code. Requirements can differ among LT1213CS8, LT1213CS8#PBF, and LT1213CS8#TRPBF because their orderable packaging attributes may differ. State the required package presentation, annual and production quantities, and target delivery date so fulfillment can confirm the most useful schedule.

工程參考資料,適用於 LT1213CS8 — 比較、設計指引及合規資訊。

選型指南

Choose the LT1213CS8 when a design needs two precision amplifier channels in an 8-SO package, a 28 MHz typical gain-bandwidth product, and a 12 V/us typical slew rate. It is especially relevant to active filters, instrumentation, acquisition front ends, feedback control, and sensor buffering where low-frequency-only performance would unnecessarily limit the signal path. Select LT1213CN8 when its commercial temperature grade matches the deployment and the exact electrical limits are acceptable; select LT1213IS8 when its industrial grade is required. LT1213CS8#PBF is the lead-free ordering designation of the same family and can be used when purchasing documentation calls for that suffix, while LT1213CS8#TRPBF identifies a tape-and-reel ordering form. None of these choices permits ignoring supply range, offset, bias current, noise, output swing, or stability. Review the manufacturer datasheet for the exact suffix before committing a replacement to production.

與替代品比較

參數 本產品 LT1213CN8 LT1213IS8 LT1213CS8#PBF
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package SOIC-8 SOIC-8 - same SOIC-8 - same SOIC-8 - same
Channel Count 2 channels 2 channels 2 channels 2 channels
Gain-Bandwidth Product 28 MHz typical 28 MHz typical 28 MHz typical 28 MHz typical
Slew Rate 12 V/us typical 12 V/us typical 12 V/us typical 12 V/us typical
Supply Type Single supply Single supply Single supply Single supply
2 V Step Settling to 0.01% 500 ns typical 500 ns typical 500 ns typical 500 ns typical

主要差異化特點

  • Combines precision operation with high bandwidth (對比LT1213CN8)
  • Same-family ordering flexibility for environmental grading (對比LT1213IS8)
  • Exact lead-free orderable designation is available (對比LT1213CS8#TRPBF)

設計說明

Route each amplifier's inverting input and feedback resistor directly between the IC and the corresponding feedback node. The high 28 MHz gain-bandwidth product makes stray capacitance and long feedback traces more relevant than they would be with a slow precision amplifier. Keep the two channels electrically separated where crosstalk matters, place bypass capacitors at the supply pins, and follow the manufacturer layout recommendations for the 8-SO footprint.

Use the stated 12 V/us slew rate and settling figures as starting points, but verify the complete signal chain with the actual gain, load, output amplitude, and supply voltage. A 500 ns settling figure for a 2 V step to 0.01% does not guarantee the same accuracy for a larger signal or a different closed-loop gain. Check output swing, load stability, and channel interaction against the manufacturer datasheet before setting sampling or settling requirements.

Do not treat the CS8 ordering suffix as a separate electrical design without checking the temperature grade, lead-free status, and orderable package code. The LT1213CS8#PBF and LT1213CS8#TRPBF listings refer to specific orderable forms of the same dual precision amplifier family. Preserve the exact approved suffix in purchasing and compare electrical limits rather than assuming that every similarly named LT1213 order code is interchangeable.

Confirm the device's permitted supply range, common-mode input range, and output swing before selecting the bypass network. A single-supply topology may require input and output biasing or level shifting if the signal remains centered around ground. Place the supply bypass capacitor close to the relevant power pin, provide a stable reference for single-supply operation, and verify ground-current paths so that high-speed output current does not add disturbance to sensitive analog nodes.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The #PBF and #TRPBF order codes are ordering identifiers, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement was exposed for the exact target. Confirm compliance from the current Analog Devices product documentation.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LT1213CS8 pbf LT1213CS8 trpbf LT1213CS8 datasheet LT1213CS8 datasheet pdf LT1213CS8 pinout LT1213CS8 specifications LT1213CS8 28MHz LT1213CS8 12V/us LT1213CS8 equivalent LT1213CS8 replacement LT1213CS8 price LT1213CS8 stock Analog Devices LT1213CS8 LT1213CS8 active filter LT1213CS8 vs LT1214

相關元件與詞彙

Analog Devices LT1213CS8 LT1213CN8 LT1213IS8 LT1213CS8#PBF LT1213CS8#TRPBF LT1213 LT1214 precision operational amplifier voltage-feedback amplifier dual amplifier single-supply op amp gain-bandwidth product slew rate settling time SOIC-8 surface-mount package active filter signal conditioning data acquisition sensor buffering feedback control Analog Devices LT1213 product page
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情