LT1213CS8 - 28MHz Dual Precision Op Amp | Analog Devices
부품 번호: LT1213CS8 ✓ 활성LT1213CS8 개요
A precision operational amplifier is a voltage-feedback amplifier designed to provide high open-loop gain, low offset error, and accurate signal amplification around a defined reference point. The LT1213 belongs to the operational-amplifier hierarchy, combining precision DC behavior with wide bandwidth and fast slew capability. It is therefore positioned between general-purpose amplifiers and specialized high-speed amplifiers rather than being limited to slow precision-only applications.
The LT1213's principal performance characteristics include a 28 MHz typical gain-bandwidth product, 12 V/us typical slew rate, and fast settling performance. These figures indicate that the device can provide useful closed-loop bandwidth well above audio frequencies while also preserving the low DC-error characteristics expected from a precision amplifier. The Analog Devices product description specifically identifies the LT1213 as a single-supply precision op amp, while the LT1214 is the quad version of the same amplifier family.
The LT1213 uses conventional voltage-feedback operation, making its implementation compatible with standard inverting, non-inverting, summing, and difference-amplifier topologies. Its combination of speed and precision is valuable when a signal requires both accurate DC-level control and rapid transitions, such as active filtering, signal conditioning, data acquisition, and feedback control. The two-channel configuration also reduces package count when an application needs matched functional stages rather than two unrelated amplifiers.
Typical uses include precision active filters, low-level sensor signal conditioning, instrumentation buffering, servo or feedback loops, and dual-channel analog processing. Its 28 MHz bandwidth provides margin for higher-frequency closed-loop operation, while the 12 V/us slew rate limits large-signal distortion in fast transient paths. Designers should still verify output swing, input range, supply limits, and stability against the manufacturer datasheet for the exact operating conditions.
Layout should keep input and feedback traces short, place compensation and decoupling components close to the associated pins, and avoid routing sensitive inputs beside high-current switching nodes. Because the CS suffix identifies a temperature-grade variant while the 8-SO package constrains board area, PCB footprint selection and thermal verification should occur together. The manufacturer datasheet and pin-description table remain the controlling references for electrical limits and package details.
This product page combines the manufacturer-defined 28 MHz bandwidth and 12 V/us slew rate with ordering distinctions, package information, application guidance, and engineering-focused replacement analysis. It highlights where the LT1213CS8 is suitable, which electrical details still require confirmation, and how engineers should evaluate a replacement without changing the surrounding precision signal-chain design.
드롭인 대체품: LT1213CS8 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
LT1213CN8
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LT1213IS8
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
LT1213CS8#PBF
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LT1213CS8 최대 정격 & 전기적 특성
| Amplifier Type | Precision voltage-feedback operational amplifier |
| Number of Channels | 2 channels |
| Architecture | Dual amplifier |
| Supply Type | Single supply |
| Gain-Bandwidth Product | 28 MHz typical |
| Slew Rate | 12 V/us typical |
| Settling Time, 2 V Step to 0.01% | 500 ns typical |
| Settling Time, 10 V Step to 1 mV | 1.1 us typical |
| 패키지 | 8-SO, SOIC-8 |
| 핀 수 | 8 pins |
| 실장 유형 | Surface mount |
| Application Classification | Standard general-purpose amplifier |
LT1213CS8 핀 구성
| 핀 1 | OUT A — Output of amplifier A |
| 핀 2 | -IN A — Inverting input of amplifier A |
| 핀 3 | +IN A — Non-inverting input of amplifier A |
| 핀 4 | V- — Negative supply connection |
| 핀 5 | +IN B — Non-inverting input of amplifier B |
| 핀 6 | -IN B — Inverting input of amplifier B |
| 핀 7 | OUT B — Output of amplifier B |
| 핀 8 | V+ — Positive supply connection |
일반적인 애플리케이션
LT1213CS8 적합 용도: 6 애플리케이션s: Precision Active Filtering, Instrumentation Signal Conditioning, Data Acquisition Front Ends, Servo and Feedback Control, Low-Level Sensor Buffering, Analog Test and Measurement.
Precision Active Filtering
The LT1213CS8 fits precision active-filter stages requiring more bandwidth than a slow instrumentation-oriented amplifier. Its 28 MHz typical gain-bandwidth product provides closed-loop bandwidth margin, while the 12 V/us typical slew rate improves response to larger filter transitions. The dual amplifier can implement two active poles or coordinated filter sections within one 8-SO package. Use the manufacturer datasheet to confirm noise, gain-bandwidth behavior, output swing, and stability for the selected topology.
추천
Instrumentation Signal Conditioning
The LT1213CS8 is useful for buffering and amplifying low-level instrumentation signals where both DC precision and useful bandwidth matter. Two independent channels can support differential signal conditioning, sensor buffering, or successive analog stages in a compact 8-SO footprint. The 28 MHz typical gain-bandwidth product and 12 V/us typical slew rate provide response margin beyond low-frequency measurement systems. Confirm input common-mode range, offset voltage, bias current, and output swing before finalizing the signal path.
추천
Data Acquisition Front Ends
The LT1213CS8 can form the fast analog input stage of a data-acquisition system when sensor outputs require amplification before sampling. Its 28 MHz typical gain-bandwidth product is substantially faster than a low-frequency precision-only device, and the 12 V/us typical slew rate supports rapid input transitions. The dual arrangement can process two channels or provide buffering and gain in one package. Validate settling against the sampling rate and verify ADC interface limits in the manufacturer datasheet.
추천
Servo and Feedback Control
The LT1213CS8 suits servo, feedback, and control loops that require faster settling than a conventional precision op amp while retaining accurate DC amplification. Its 500 ns typical settling time for a 2 V step to 0.01% and 12 V/us typical slew rate help reduce response delay in feedback networks. Two channels can implement an error amplifier plus an output buffer or a related control function. Check unity-gain stability, load capability, and output-current limits for the selected feedback topology.
추천
Low-Level Sensor Buffering
The LT1213CS8 provides two channels for buffering sensor outputs where amplitude accuracy, offset behavior, and transient response must coexist. Its 28 MHz typical gain-bandwidth product avoids imposing an unnecessarily narrow bandwidth on the signal path, while the 12 V/us typical slew rate helps preserve large-signal fidelity. The device is suitable for resistive, bridge, and general low-level analog stages after confirming input bias current, common-mode range, noise, and output capability.
추천
Analog Test and Measurement
The LT1213CS8 can support fast analog test and measurement paths that require accurate low-level amplification without a very slow amplifier response. The 28 MHz typical gain-bandwidth product and 12 V/us typical slew rate are useful in attenuator, buffer, and differential conditioning circuits driven by moderate-bandwidth sources. The dual package can reduce board area by consolidating two functions. Verify offset, noise, input range, output swing, and settling against the test system's accuracy and bandwidth requirements.
추천
추천 제품 요약
엔지니어링 참조 데이터: LT1213CS8 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LT1213CN8 | LT1213IS8 | LT1213CS8#PBF |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | SOIC-8 | SOIC-8 - same | SOIC-8 - same | SOIC-8 - same |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels |
| Gain-Bandwidth Product | 28 MHz typical | 28 MHz typical | 28 MHz typical | 28 MHz typical |
| Slew Rate | 12 V/us typical | 12 V/us typical | 12 V/us typical | 12 V/us typical |
| Supply Type | Single supply | Single supply | Single supply | Single supply |
| 2 V Step Settling to 0.01% | 500 ns typical | 500 ns typical | 500 ns typical | 500 ns typical |
주요 차별점
- Combines precision operation with high bandwidth (vs LT1213CN8)
- Same-family ordering flexibility for environmental grading (vs LT1213IS8)
- Exact lead-free orderable designation is available (vs LT1213CS8#TRPBF)
설계 노트
Route each amplifier's inverting input and feedback resistor directly between the IC and the corresponding feedback node. The high 28 MHz gain-bandwidth product makes stray capacitance and long feedback traces more relevant than they would be with a slow precision amplifier. Keep the two channels electrically separated where crosstalk matters, place bypass capacitors at the supply pins, and follow the manufacturer layout recommendations for the 8-SO footprint.
Use the stated 12 V/us slew rate and settling figures as starting points, but verify the complete signal chain with the actual gain, load, output amplitude, and supply voltage. A 500 ns settling figure for a 2 V step to 0.01% does not guarantee the same accuracy for a larger signal or a different closed-loop gain. Check output swing, load stability, and channel interaction against the manufacturer datasheet before setting sampling or settling requirements.
Do not treat the CS8 ordering suffix as a separate electrical design without checking the temperature grade, lead-free status, and orderable package code. The LT1213CS8#PBF and LT1213CS8#TRPBF listings refer to specific orderable forms of the same dual precision amplifier family. Preserve the exact approved suffix in purchasing and compare electrical limits rather than assuming that every similarly named LT1213 order code is interchangeable.
Confirm the device's permitted supply range, common-mode input range, and output swing before selecting the bypass network. A single-supply topology may require input and output biasing or level shifting if the signal remains centered around ground. Place the supply bypass capacitor close to the relevant power pin, provide a stable reference for single-supply operation, and verify ground-current paths so that high-speed output current does not add disturbance to sensitive analog nodes.
규정 준수 정보
The #PBF and #TRPBF order codes are ordering identifiers, but no explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement was exposed for the exact target. Confirm compliance from the current Analog Devices product documentation.