Maxim Integrated

MAX232MLP/883B - Dual RS-232 Transceiver | Maxim Integrated

MPN: MAX232MLP/883B ✓ 啟用中
5 V Vdss 20-LCC, no-lead Package
MOQ: 1 |

MAX232MLP/883B 概覽

The Maxim Integrated MAX232MLP/883B is a dual-channel RS-232 line transceiver with two transmitters and two receivers, operating from a single 5 V supply. It supports data rates up to 120 kb/s and is packaged in a 20-lead, no-lead ceramic LCC measuring 8.9 mm by 8.9 mm. The /883B ordering designation identifies a military-temperature product variant with a square QCCN package.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 differential voltage levels and converts incoming RS-232 signals back into logic-compatible levels. The MAX232 family belongs to the broader line-driver and line-receiver hierarchy, connecting modern digital control systems with RS-232 equipment through the EIA/TIA-232E and V.28/V.24 interface specifications.

The MAX232MLP/883B provides two transmit channels and two receive channels, allowing a complete full-duplex RS-232 port to be implemented with one integrated circuit. Its 120 kb/s maximum data rate is suitable for configuration ports, diagnostic consoles, industrial control links, and service equipment. The single 5 V supply also simplifies system power design compared with older RS-232 implementations requiring positive and negative voltage rails.

The MAX232 family uses charge-pump circuitry to generate the positive and negative voltages required by RS-232 line levels from the 5 V supply. Charge-pump capacitors must be connected exactly as shown in the manufacturer datasheet, with suitable ceramic capacitance and effective loop layout. A receive and transmit path can operate simultaneously, supporting full-duplex communication through the integrated dual-channel arrangement.

Typical applications include industrial serial adapters, instrumentation interfaces, embedded-service ports, legacy peripheral connections, and data-acquisition equipment. The military-temperature ordering variant is relevant when environmental requirements exceed the standard commercial temperature range. Its 20-terminal ceramic package also differs mechanically from the 16-pin plastic-DIP and narrow-SOIC options offered elsewhere in the MAX232 family.

Board design should preserve the charge-pump connection paths and provide appropriate bypass capacitance close to the supply pins. Keep RS-232 signal routing away from sensitive analog or high-speed digital traces, use the specified external capacitors, and observe the absolute maximum ratings for supply and signal voltages. The interface is intended for RS-232 levels, not directly for TTL, CMOS, RS-485, or differential Ethernet signals.

This page combines the manufacturer product information, package characteristics, interface functions, and verified ordering information into an engineering-focused guide. It also identifies practical applications, same-footprint family alternatives, and design considerations that help shorten component selection and PCB implementation time.

直接替換替代品,適用於 MAX232MLP/883B — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

MAX232MLP

✅ 直接替換
📦 20-LCC
Same 2-transmitter, 2-receiver, 5 V, 120 kb/s configuration with 0% core-performance difference; the /883B qualification and ordering suffix must be checked

📋 參考替代品(不在目錄中)

MAX232MLP/883

✅ 直接替換
📦 20-LCC
Same 2-transmitter, 2-receiver, 5 V, 120 kb/s configuration and 20-LCC family package; the B suffix distinguishes the ordering variant and requires qualification review

📋 參考替代品(不在目錄中)

MAX232MLP/883B 規格

Product Type RS-232 line transceiver
Transmitter Channels 2 channels
Receiver Channels 2 channels
Nominal Supply Voltage 5 V
Maximum Data Rate 120 kb/s
Interface Standard EIA/TIA-232E and V.28/V.24
Duplex Mode Full duplex
Package Type 20-LCC, no-lead
Package Dimensions 8.9 mm x 8.9 mm
Package Code QCCN
Package Shape Square
Terminal Count 20 terminals
安裝方式 No-lead surface mount
Temperature Grade Military
ESD HBM Rating 2 kV

MAX232MLP/883B square 腳位配置指南

MAX232MLP/883B(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX232MLP/883B 的 square 封裝腳位圖

無詳細腳位定義資料: MAX232MLP/883B.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX232MLP/883B 適用於 6 應用s: Industrial Diagnostic Console, Data-Acquisition Equipment, Legacy Peripheral Interface, Instrumentation Service Port, Embedded Configuration Interface, Military-Grade Control Interface.

🏭

Industrial Diagnostic Console

The MAX232MLP/883B fits an industrial diagnostic console that must exchange RS-232 diagnostic data with a controller or service computer. Its two transmitters and two receivers support full-duplex operation, while the 120 kb/s maximum rate is more than adequate for command responses, configuration logs, and status polling. A single 5 V supply simplifies the interface supply rail. Place the transceiver between the controller logic and the isolated or protected RS-232 connector, following the manufacturer charge-pump capacitor values and keeping the connector-side return path away from sensitive analog circuitry.

📟

Data-Acquisition Equipment

The MAX232MLP/883B is appropriate for laboratory and industrial data-acquisition equipment that must communicate over an RS-232 control port. The two independent transmit and receive channels can support separate command and telemetry links, and the 120 kb/s rate is suitable for moderate-volume sensor data and configuration information. Operating from 5 V avoids requiring separate positive and negative RS-232 rails. Use the device near the connector or cable entry point so unbalanced RS-232 signals do not cross sensitive measurement circuitry, and observe the specified charge-pump capacitor layout.

🖨️

Legacy Peripheral Interface

The MAX232MLP/883B provides a practical bridge between modern digital logic and a legacy RS-232 peripheral. Two transmitters and two receivers allow more than one directional channel to share one interface IC, while full-duplex operation permits simultaneous command transmission and status reception. Its 120 kb/s limit is appropriate for many printers, scales, programmable instruments, and service interfaces. Confirm logic-level compatibility with the host controller, connect the appropriate RS-232 signal and ground conductors at the equipment boundary, and route the cable-side nets away from clocks, sensors, and high-impedance analog inputs.

🔧

Instrumentation Service Port

The MAX232MLP/883B is well suited to an instrumentation service port because it combines two full-duplex RS-232 channels with a maximum 120 kb/s data rate in a single 5 V-powered device. This allows a product to expose command, log, or calibration communication without allocating a separate transceiver for each direction. The 20-terminal no-lead LCC package supports dense ceramic or hybrid assemblies where a 16-pin DIP would be too large. Validate the environmental rating and /883B ordering requirements for the target system, and provide the external charge-pump capacitors with short, compact traces.

🧩

Embedded Configuration Interface

The MAX232MLP/883B can provide a compact configuration interface for embedded industrial equipment that must be programmed or monitored through a service connection. The integrated dual transmitter and dual receiver arrangement supports full-duplex exchanges without separate level-conversion ICs for each signal direction. Its 120 kb/s maximum rate is suitable for firmware-loading control messages, device identification, and configuration transfers rather than bulk file traffic. Use a single 5 V supply, place bypass and charge-pump capacitors close to their associated pins, and provide the appropriate logic thresholds for the controller connected to the transceiver.

✈️

Military-Grade Control Interface

The MAX232MLP/883B is appropriate for a military-grade control interface when the system requires the exact /883B ordering variant and its associated environmental and qualification specifications. The device supplies two RS-232 transmitters and two receivers from a 5 V source, supporting full-duplex control and status traffic up to 120 kb/s. Its 20-terminal QCCN ceramic LCC package supports compact, ruggedized assemblies where a plastic DIP or SOIC may be unsuitable. Before release, compare the complete ordering table, temperature limits, package tolerances, and test requirements against the system specification.

What is the MAX232MLP/883B?
The MAX232MLP/883B is a dual RS-232 transceiver containing two transmitters and two receivers in a 20-lead LCC package. It operates from a nominal 5 V supply and supports RS-232 communication rates up to 120 kb/s. According to the Maxim Integrated MAX232 datasheet and product page, the device is intended for EIA/TIA-232E and V.28/V.24 interfaces, making it suitable for industrial, diagnostic, and legacy serial equipment.
What are the key specifications of MAX232MLP/883B that engineers should know?
The MAX232MLP/883B provides two drivers, two receivers, full-duplex operation, and a maximum data rate of 120 kb/s from a single 5 V supply. Its package is a 20-terminal, no-lead QCCN ceramic LCC measuring 8.9 mm by 8.9 mm. According to the Maxim Integrated MAX232 datasheet, the family targets EIA/TIA-232E and V.28/V.24 communications interfaces.
Where can I download the MAX232MLP/883B datasheet PDF?
The official MAX232MLP/883B documentation is available through the Maxim Integrated MAX232 product page at analog.com, which links to the family data sheet and ordering information. The manufacturer data sheet describes the electrical ratings, charge-pump circuit, pin descriptions, package dimensions, and ordering options. Use the Analog Devices documentation link for the most authoritative revision of the MAX232 family documentation.
Where is the MAX232MLP/883B pinout located?
The MAX232MLP/883B pinout is located in the pin-description table and package drawing of the Maxim Integrated MAX232 data sheet. The component uses a 20-terminal, no-lead LCC package, so the pin assignment must be matched against the 20-pin QCCN footprint rather than a 16-pin DIP or SOIC layout. Use the manufacturer pin-description table when assigning PCB nets.
How many RS-232 channels does MAX232MLP/883B provide?
The MAX232MLP/883B provides two RS-232 transmitter channels and two receiver channels. This arrangement supports a full-duplex interface containing two data paths. According to the Maxim Integrated MAX232 datasheet, the device uses a single nominal 5 V supply and reaches a maximum data rate of 120 kb/s, combining multi-channel line conversion with integrated charge-pump voltage generation.
What is the maximum data rate of MAX232MLP/883B?
The MAX232MLP/883B supports a maximum data rate of 120 kb/s. According to the Maxim Integrated MAX232 datasheet, the MAX220 through MAX249 family is designed for EIA/TIA-232E and V.28/V.24 communications interfaces. This rate is appropriate for configuration links, diagnostics, service consoles, and industrial control interfaces rather than high-speed external storage.
Can MAX232MLP/883B be used with a 3.3 V microcontroller?
The MAX232MLP/883B can interface with a 3.3 V logic system when its input and output levels are compatible with the chosen microcontroller, but the RS-232 side still requires a 5 V supply. According to the Maxim Integrated MAX232 datasheet, the device generates bipolar RS-232 voltages internally. Verify the logic-high and logic-low thresholds, supply current, and timing in the data sheet before using it with a particular controller.
What is the best drop-in replacement for MAX232MLP/883B?
The closest identified same-family option is MAX232MLP, which retains the 2-transmitter, 2-receiver, 5 V, 120 kb/s configuration and the same 20-LCC package. Its military-temperature qualification and ordering-code details must be checked before substitution. The MAX232MLP/883 ordering variant is another close family option, but the /883B qualification must be confirmed against the original procurement specification.
Can MAX232MLP replace MAX232MLP/883B?
MAX232MLP can serve as a candidate for MAX232MLP/883B because both belong to the MAX232 family and are associated with the 20-lead LCC configuration, two transmitters, two receivers, a 5 V supply, and 120 kb/s operation. A functional substitution still requires verification of temperature grade, qualification markings, package dimensions, and procurement requirements. Do not approve it solely from the base-family designation.
MAX232MLP/883B vs MAX232MLP - which is better for military equipment?
MAX232MLP/883B is the preferred choice when the original system requires the military-temperature /883B-qualified ordering variant. MAX232MLP preserves the core 2/2 RS-232 channel configuration, 5 V operation, 120 kb/s data rate, and 20-LCC family package, but its qualification and environmental ratings must be verified. Choose MAX232MLP/883B when exact military procurement traceability is required.
When should I choose MAX232MLP/883B over a 16-pin MAX232 option?
Choose MAX232MLP/883B when an existing board requires the 20-terminal no-lead QCCN footprint and military-temperature ordering variant. A 16-pin DIP or SOIC MAX232 can provide similar 2/2 RS-232 functions but cannot replace it without changing the PCB because the package and pin count differ. The 20-LCC format also supports dense through-hole-style ceramic assembly rather than surface-mount SOIC placement.
Is MAX232MLP/883B suitable for industrial serial communication?
The MAX232MLP/883B is suitable for industrial serial communication when the system requires RS-232 levels, a 5 V supply, and a maximum data rate no greater than 120 kb/s. Its dual transmitter and dual receiver arrangement supports two communication paths in full-duplex operation. According to the Maxim Integrated MAX232 family datasheet, the device is specifically intended for EIA/TIA-232E and V.28/V.24 interfaces.
Where can I buy MAX232MLP/883B online?
Use the Request a Quote form on this page to request MAX232MLP/883B availability, current lead time, minimum order quantity, and a formal quotation. The exact /883B ordering suffix is important because package and qualification options can differ within the MAX232 family. Include the required package code QCCN and military-temperature ordering details in the request.
What is the price of MAX232MLP/883B?
Submit the MAX232MLP/883B part number through the Request a Quote form on this page for a current quotation. Pricing can vary with order quantity, sourcing condition, and the exact /883B qualification suffix. The quote request should specify the required quantity, 20-terminal QCCN package, military-temperature grade, and any inspection or traceability requirements.
What is the lead time for MAX232MLP/883B?
Request the current MAX232MLP/883B lead time and minimum order quantity through the Request a Quote form on this page. The lead-time confirmation should identify the exact /883B ordering suffix and any required inspection or traceability documentation. Because availability changes with procurement volume and sourcing conditions, obtain the schedule directly with the quotation rather than relying on a generic family lead time.
Is MAX232MLP/883B in stock?
Use the Request a Quote form on this page to check current MAX232MLP/883B stock status and obtain a confirmed delivery schedule. Include the exact MPN MAX232MLP/883B and the required QCCN package in the request. A stock confirmation should also identify any factory lead time, minimum order quantity, and inspection requirements.

工程參考資料,適用於 MAX232MLP/883B — 比較、設計指引及合規資訊。

選型指南

Choose MAX232MLP/883B when an existing design requires the exact 20-terminal QCCN package, military-temperature ordering designation, two RS-232 transmitters, two receivers, and operation from a single 5 V supply. MAX232MLP is a candidate when the core 2/2, 120 kb/s, 5 V interface is sufficient and the environmental qualification has been approved. MAX232MLP/883 is useful when the base family and 20-LCC mechanics fit, but the precise difference between the /883 and /883B ordering codes must be reviewed against procurement and qualification requirements. Do not substitute a 16-pin DIP or SOIC version on an existing 20-LCC board without changing the PCB. For any substitution, verify pin assignments, logic thresholds, absolute-maximum ratings, capacitor values, package dimensions, temperature limits, and military documentation.

與替代品比較

參數 本產品 MAX232MLP MAX232MLP/883
Brand Maxim Integrated Maxim Integrated Maxim Integrated
Package 20-LCC 20-LCC - same 20-LCC - same
Transmitter Channels 2 2 2
Receiver Channels 2 2 2
Nominal Supply Voltage 5 V 5 V 5 V
Maximum Data Rate 120 kb/s 120 kb/s 120 kb/s
Duplex Mode Full duplex Full duplex Full duplex
Ordering Variant MAX232MLP/883B MAX232MLP MAX232MLP/883

主要差異化特點

  • Exact /883B military ordering variant (對比MAX232MLP)
  • Dual full-duplex RS-232 channels in one package (對比MAX232MLP/883)
  • No-lead 20-terminal ceramic package (對比MAX232MLP/883)

設計說明

Place the MAX232MLP/883B charge-pump capacitors exactly as shown in the Maxim Integrated MAX232 datasheet and keep each capacitor's associated signal trace short. The no-lead 20-LCC footprint should follow the manufacturer package drawing, including terminal length, width, and exposed geometry. Confirm that the board accommodates the 8.9 mm by 8.9 mm ceramic package and that no-lead components are placed only where the assembly process supports their soldering profile.

Route RS-232 connector-side signals directly to the MAX232MLP/883B and keep them separated from clocks, ADC inputs, references, and other high-impedance analog nodes. The RS-232 interface is unbalanced and can pick up noise when routed across the board. Provide a continuous return path for each interface and use the connector-side ground reference according to the equipment architecture. Avoid long stubs and unnecessary test-point branches on charge-pump and line-driver nets.

Decouple the 5 V supply close to the transceiver with the capacitance specified by the manufacturer and account for the device's supply-current requirement in the upstream regulator design. Check every connected signal against the MAX232 absolute-maximum ratings, including off-state and powered-state input voltages. The internal charge pump generates bipolar RS-232 voltage from the single 5 V supply, so the external capacitor values and ESR characteristics remain part of the interface performance.

Do not treat RS-232 logic levels as direct TTL or CMOS levels, and do not connect the MAX232MLP/883B to an RS-485 bus. Verify the full ordering code, temperature grade, package dimensions, and qualification requirements before replacing MAX232MLP/883B with a related MAX232 suffix. A shared family name does not remove the need to compare pin assignments, electrical limits, ceramic-package tolerances, and procurement specifications.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer material identifies the MAX232 family and its EIA/TIA-232E and V.28/V.24 applications. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statements for the exact MAX232MLP/883B ordering suffix require confirmation from the manufacturer documentation.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX232MLP/883B datasheet MAX232MLP/883B pinout MAX232MLP/883B datasheet pdf MAX232MLP/883B specifications MAX232MLP/883B equivalent MAX232MLP/883B replacement MAX232MLP/883B cross reference MAX232MLP vs MAX232MLP/883B MAX232MLP/883B footprint MAX232MLP/883B QCCN package Maxim Integrated MAX232MLP/883B MAX232MLP/883B price MAX232MLP/883B stock MAX232MLP/883B RS-232 interface MAX232MLP 20-LCC pinout

相關元件與詞彙

Maxim Integrated Analog Devices MAX232MLP/883B MAX232MLP MAX232MLP/883 RS-232 transceiver line transceiver line driver line receiver interface IC EIA/TIA-232E V.28 V.24 full duplex charge-pump voltage generation 5 V power supply 120 kb/s data rate 2 transmitters 2 receivers 20-LCC QCCN ceramic leadless chip carrier no-lead surface mount industrial instrumentation military electronics
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情