MAX3221CAE+T - 1/1 RS-232 Transceiver | Analog Devices
MPN: MAX3221CAE+T ✓ 啟用中MAX3221CAE+T 概覽
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. Within the product hierarchy, the MAX3221 belongs to the RS-232 transceiver class of interface ICs, which sits between computer serial ports or control equipment and external communication links. The MAX3221 is the one-driver, one-receiver member of the MAX3221 family and is smaller than two-channel RS-232 transceivers such as the MAX3223.
AutoShutdown is the device's principal power-management feature. When the receiver does not detect a valid signal level, the onboard power supply and driver shut down, reducing supply current to 1 µA as stated on the manufacturer product page. This behavior is valuable in battery-powered or intermittently connected equipment because a permanently connected serial port no longer needs to retain a full charge-pump load when communication is inactive. The 3 V to 5.5 V supply range supports integration with both 3.3 V and 5 V system rails.
The MAX3221 integrates the RS-232 line driver, receiver, and onboard charge-pump circuitry in one compact package. This integration eliminates a separate external power-supply circuit while providing the voltage conversion required by the RS-232 interface. Unlike designs requiring a ±12 V supply, the MAX3221 generates RS-232-compatible levels from a single low-voltage supply. Its 16-SSOP construction supports conventional surface-mount assembly while conserving board area in embedded control, industrial, and communications systems.
Typical applications include single-port serial-control links in industrial equipment, point-of-sale terminals, data-acquisition systems, instrumentation, and battery-operated peripherals. In each case, the device handles one unidirectional data path with the driver and the opposite direction with the receiver. Because it provides only one driver and one receiver, a design needing two physical RS-232 channels should evaluate a two-channel transceiver rather than adding a second MAX3221 unnecessarily.
The primary design consideration is external bypass capacitance. Place the supply bypass capacitor and charge-pump capacitor close to their associated pins, with short ground paths to reduce supply disturbance and improve interface stability. Confirm the external capacitor values and connection details in the manufacturer datasheet before layout release, especially in designs operating from 3.3 V where charge-pump headroom and startup behavior affect system margins.
This page combines the manufacturer product information with practical interface guidance, structured specifications, verified pin-compatible family alternatives, and design considerations that help engineers evaluate the MAX3221CAE+T for low-power RS-232 implementations.
直接替換替代品,適用於 MAX3221CAE+T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3221CAE+T (相同外形與佔位) — 差異在於 Interface Standard, Product Type, Supply Voltage Range, AutoShutdown Supply Current, ESD Protection.
MAX3221EAE+T
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3221ECAE+T
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3221EIDBG4
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MAX3221CAEE+T
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MAX3221CAE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CAE+T 規格
| Product Type | 1/1 full RS-232 transceiver |
| Driver Count | 1 driver |
| Receiver Count | 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| AutoShutdown Supply Current | 1 µA |
| Power-Supply Feature | AutoShutdown |
| Interface Standard | RS-232 |
| 封裝 | 16-pin SSOP |
| 安裝類型 | Surface mount |
| Onboard Charge Pump | Integrated |
| Supply Configuration | Single positive supply |
MAX3221CAE+T 16-pin ssop 腳位配置指南
MAX3221CAE+T(16-pin ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3221CAE+T.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3221CAE+T 適用於 6 應用s: Industrial Serial Control, Battery-Powered Portable Equipment, Data-Acquisition Equipment, Point-of-Sale Terminal, Instrumentation and Measurement, Remote Monitoring and IoT Gateways.
Industrial Serial Control
The MAX3221CAE+T suits a compact industrial control link that requires one RS-232 driver and one receiver on a 3.3 V or 5 V logic rail. Place the transceiver between the controller UART and the external RS-232 connector, allowing the integrated charge pump to generate compliant line levels from one supply. The 16-SSOP package preserves board area, while the 1 µA AutoShutdown state reduces standby consumption when the connected equipment is idle. Confirm the exact ESD, temperature, and external-capacitor requirements in the manufacturer datasheet before deploying the interface in an industrial enclosure.
推薦
Battery-Powered Portable Equipment
The MAX3221CAE+T is useful in portable equipment where a persistent RS-232 port would otherwise waste standby power. AutoShutdown disables the onboard supply and driver when the receiver sees no valid signal, reducing the stated shutdown current to 1 µA. This behavior is especially helpful for battery-operated data loggers and service tools that communicate only intermittently. The interface still requires careful external bypassing and a wake-capable UART or power-management arrangement so the system controller can detect or generate a valid serial event.
推薦
Data-Acquisition Equipment
For laboratory or field data-acquisition equipment, the MAX3221CAE+T provides a compact single-port RS-232 command channel between a controller and an external instrument. Its one-driver, one-receiver arrangement supports bidirectional serial communication when one direction is transmitted and the other is received. Operation from 3 V to 5.5 V permits connection to either 3.3 V embedded processors or 5 V controllers. Because the device includes only one channel, applications needing simultaneous full-duplex traffic should allocate one driver and one receiver appropriately and verify protocol timing.
推薦
Point-of-Sale Terminal
A point-of-sale or receipt-printer interface can use the MAX3221CAE+T when the design needs one RS-232 communication path rather than a multi-port controller. The integrated charge pump removes the need for a separate bipolar transmitter supply, and the 3 V to 5.5 V input range supports common embedded logic rails. AutoShutdown helps avoid unnecessary standby load when the peripheral is disconnected or idle. Engineers should add the connector protection and grounding required by the installation environment rather than relying on the transceiver alone for surge immunity.
推薦
Instrumentation and Measurement
The MAX3221CAE+T can connect a measurement instrument's control processor to a host computer over RS-232. One receiver path brings the host command into the instrument, and one driver path returns responses or status information. The single-supply architecture simplifies portable test equipment, while AutoShutdown reduces consumption between measurement cycles. The compact 16-SSOP outline also supports dense instrument electronics. Use the manufacturer datasheet to select the charge-pump and supply capacitors, then validate the complete interface at the intended cable length and ground-potential difference.
推薦
Remote Monitoring and IoT Gateways
Remote monitoring equipment that retains an RS-232 service port can benefit from the MAX3221CAE+T's low-power shutdown behavior. The transceiver remains connected to the UART while its internal supply and driver turn off during inactivity, reducing standby load without removing the physical service interface. This makes it practical for gateways, environmental monitors, and industrial controllers that are intermittently serviced through a legacy serial connection. The design must ensure the UART pins do not back-power the interface and should provide a defined state when the remote host sends no signal.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3221CAE+T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3221EAE+T | MAX3221ECAE+T | MAX3221EIDBG4 | MAX3221CAEE+T | MAX3221CAE+ |
|---|---|---|---|---|---|---|
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Driver and Receiver Count | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Power-Supply Feature | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown |
| Interface Standard | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| Ordering Format | CAE, tape-and-reel suffix +T | EAE, tape-and-reel suffix +T | ECAE, tape-and-reel suffix +T | EIDBG4 ordering format | CAEE, tape-and-reel suffix +T | CAE commercial ordering format |
主要差異化特點
- Lower standby current through automatic interface shutdown (對比MAX3221CAE+)
- Single-channel solution for compact single-port equipment (對比MAX3223)
- Wide low-voltage supply compatibility (對比MAX3221EIDBG4)
設計說明
Place the MAX3221CAE+T charge-pump and supply capacitors close to their designated pins, and route each component directly to the associated ground or supply node with minimal loop area. The manufacturer datasheet should control the capacitor values and topology. Avoid placing long traces between the IC and capacitors because the charge-pump network must remain compact for stable operation at 3 V to 5.5 V.
Keep the RS-232 driver output and receiver input away from the charge-pump nodes and switching-current paths. A solid ground plane can reduce coupling, but the connector-side protection network and cable-return path still require controlled layout. Confirm whether the board ground and connector shield ground should be connected directly or through the protection components prescribed by the complete system design.
Do not assume AutoShutdown means the driver output is actively held at a defined RS-232 level in every system condition. The internal supply and driver shut down when no valid receiver signal is detected, so UART behavior, external circuitry, and the expected idle state must be reviewed. Also verify enable polarity, receiver polarity, temperature grade, and external-capacitor requirements when comparing MAX3221 family alternatives.
合規資訊
Use the exact Analog Devices ordering information and manufacturer declarations for compliance status. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code.