MAX3221CAE+T - 1/1 RS-232 Transceiver | Analog Devices
Teilenummer: MAX3221CAE+T ✓ AktivMAX3221CAE+T Übersicht
An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. Within the product hierarchy, the MAX3221 belongs to the RS-232 transceiver class of interface ICs, which sits between computer serial ports or control equipment and external communication links. The MAX3221 is the one-driver, one-receiver member of the MAX3221 family and is smaller than two-channel RS-232 transceivers such as the MAX3223.
AutoShutdown is the device's principal power-management feature. When the receiver does not detect a valid signal level, the onboard power supply and driver shut down, reducing supply current to 1 µA as stated on the manufacturer product page. This behavior is valuable in battery-powered or intermittently connected equipment because a permanently connected serial port no longer needs to retain a full charge-pump load when communication is inactive. The 3 V to 5.5 V supply range supports integration with both 3.3 V and 5 V system rails.
The MAX3221 integrates the RS-232 line driver, receiver, and onboard charge-pump circuitry in one compact package. This integration eliminates a separate external power-supply circuit while providing the voltage conversion required by the RS-232 interface. Unlike designs requiring a ±12 V supply, the MAX3221 generates RS-232-compatible levels from a single low-voltage supply. Its 16-SSOP construction supports conventional surface-mount assembly while conserving board area in embedded control, industrial, and communications systems.
Typical applications include single-port serial-control links in industrial equipment, point-of-sale terminals, data-acquisition systems, instrumentation, and battery-operated peripherals. In each case, the device handles one unidirectional data path with the driver and the opposite direction with the receiver. Because it provides only one driver and one receiver, a design needing two physical RS-232 channels should evaluate a two-channel transceiver rather than adding a second MAX3221 unnecessarily.
The primary design consideration is external bypass capacitance. Place the supply bypass capacitor and charge-pump capacitor close to their associated pins, with short ground paths to reduce supply disturbance and improve interface stability. Confirm the external capacitor values and connection details in the manufacturer datasheet before layout release, especially in designs operating from 3.3 V where charge-pump headroom and startup behavior affect system margins.
This page combines the manufacturer product information with practical interface guidance, structured specifications, verified pin-compatible family alternatives, and design considerations that help engineers evaluate the MAX3221CAE+T for low-power RS-232 implementations.
Drop-in-Alternativen für MAX3221CAE+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3221CAE+T (gleiche Bauform und Footprint) – abweichend in Interface Standard, Product Type, Supply Voltage Range, AutoShutdown Supply Current, ESD Protection.
MAX3221EAE+T
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MAX3221ECAE+T
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MAX3221EIDBG4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MAX3221CAEE+T
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MAX3221CAE+
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MAX3221CAE+T Technische Daten
| Product Type | 1/1 full RS-232 transceiver |
| Driver Count | 1 driver |
| Receiver Count | 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| AutoShutdown Supply Current | 1 µA |
| Power-Supply Feature | AutoShutdown |
| Interface Standard | RS-232 |
| Gehäuse | 16-pin SSOP |
| Montageart | Surface mount |
| Onboard Charge Pump | Integrated |
| Supply Configuration | Single positive supply |
MAX3221CAE+T 16-pin ssop Pinbelegungsleitfaden
Pinbelegung für MAX3221CAE+T (16-pin ssop-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für MAX3221CAE+T.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MAX3221CAE+T ist geeignet für 6 Anwendungs: Industrial Serial Control, Battery-Powered Portable Equipment, Data-Acquisition Equipment, Point-of-Sale Terminal, Instrumentation and Measurement, Remote Monitoring and IoT Gateways.
Industrial Serial Control
The MAX3221CAE+T suits a compact industrial control link that requires one RS-232 driver and one receiver on a 3.3 V or 5 V logic rail. Place the transceiver between the controller UART and the external RS-232 connector, allowing the integrated charge pump to generate compliant line levels from one supply. The 16-SSOP package preserves board area, while the 1 µA AutoShutdown state reduces standby consumption when the connected equipment is idle. Confirm the exact ESD, temperature, and external-capacitor requirements in the manufacturer datasheet before deploying the interface in an industrial enclosure.
Empfohlen
Battery-Powered Portable Equipment
The MAX3221CAE+T is useful in portable equipment where a persistent RS-232 port would otherwise waste standby power. AutoShutdown disables the onboard supply and driver when the receiver sees no valid signal, reducing the stated shutdown current to 1 µA. This behavior is especially helpful for battery-operated data loggers and service tools that communicate only intermittently. The interface still requires careful external bypassing and a wake-capable UART or power-management arrangement so the system controller can detect or generate a valid serial event.
Empfohlen
Data-Acquisition Equipment
For laboratory or field data-acquisition equipment, the MAX3221CAE+T provides a compact single-port RS-232 command channel between a controller and an external instrument. Its one-driver, one-receiver arrangement supports bidirectional serial communication when one direction is transmitted and the other is received. Operation from 3 V to 5.5 V permits connection to either 3.3 V embedded processors or 5 V controllers. Because the device includes only one channel, applications needing simultaneous full-duplex traffic should allocate one driver and one receiver appropriately and verify protocol timing.
Empfohlen
Point-of-Sale Terminal
A point-of-sale or receipt-printer interface can use the MAX3221CAE+T when the design needs one RS-232 communication path rather than a multi-port controller. The integrated charge pump removes the need for a separate bipolar transmitter supply, and the 3 V to 5.5 V input range supports common embedded logic rails. AutoShutdown helps avoid unnecessary standby load when the peripheral is disconnected or idle. Engineers should add the connector protection and grounding required by the installation environment rather than relying on the transceiver alone for surge immunity.
Empfohlen
Instrumentation and Measurement
The MAX3221CAE+T can connect a measurement instrument's control processor to a host computer over RS-232. One receiver path brings the host command into the instrument, and one driver path returns responses or status information. The single-supply architecture simplifies portable test equipment, while AutoShutdown reduces consumption between measurement cycles. The compact 16-SSOP outline also supports dense instrument electronics. Use the manufacturer datasheet to select the charge-pump and supply capacitors, then validate the complete interface at the intended cable length and ground-potential difference.
Empfohlen
Remote Monitoring and IoT Gateways
Remote monitoring equipment that retains an RS-232 service port can benefit from the MAX3221CAE+T's low-power shutdown behavior. The transceiver remains connected to the UART while its internal supply and driver turn off during inactivity, reducing standby load without removing the physical service interface. This makes it practical for gateways, environmental monitors, and industrial controllers that are intermittently serviced through a legacy serial connection. The design must ensure the UART pins do not back-power the interface and should provide a defined state when the remote host sends no signal.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MAX3221CAE+T – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MAX3221EAE+T | MAX3221ECAE+T | MAX3221EIDBG4 | MAX3221CAEE+T | MAX3221CAE+ |
|---|---|---|---|---|---|---|
| Package | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP | 16-SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Driver and Receiver Count | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver | 1 driver / 1 receiver |
| Supply Voltage Range | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V | 3 V to 5.5 V |
| Power-Supply Feature | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown |
| Interface Standard | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 | RS-232 |
| Ordering Format | CAE, tape-and-reel suffix +T | EAE, tape-and-reel suffix +T | ECAE, tape-and-reel suffix +T | EIDBG4 ordering format | CAEE, tape-and-reel suffix +T | CAE commercial ordering format |
Wichtigste Unterscheidungsmerkmale
- Lower standby current through automatic interface shutdown (vs. MAX3221CAE+)
- Single-channel solution for compact single-port equipment (vs. MAX3223)
- Wide low-voltage supply compatibility (vs. MAX3221EIDBG4)
Designhinweise
Place the MAX3221CAE+T charge-pump and supply capacitors close to their designated pins, and route each component directly to the associated ground or supply node with minimal loop area. The manufacturer datasheet should control the capacitor values and topology. Avoid placing long traces between the IC and capacitors because the charge-pump network must remain compact for stable operation at 3 V to 5.5 V.
Keep the RS-232 driver output and receiver input away from the charge-pump nodes and switching-current paths. A solid ground plane can reduce coupling, but the connector-side protection network and cable-return path still require controlled layout. Confirm whether the board ground and connector shield ground should be connected directly or through the protection components prescribed by the complete system design.
Do not assume AutoShutdown means the driver output is actively held at a defined RS-232 level in every system condition. The internal supply and driver shut down when no valid receiver signal is detected, so UART behavior, external circuitry, and the expected idle state must be reviewed. Also verify enable polarity, receiver polarity, temperature grade, and external-capacitor requirements when comparing MAX3221 family alternatives.
Compliance-Informationen
Use the exact Analog Devices ordering information and manufacturer declarations for compliance status. No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code.