MAX3221CPWE4 - 3-5.5V Single RS-232 Transceiver | Texas Instruments
MPN: MAX3221CPWE4 ✓ 啟用中MAX3221CPWE4 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into logic-level voltages. In the broader semiconductor hierarchy, the MAX3221CPWE4 belongs to the interface IC family and provides the physical signaling layer between a host controller and a serial peripheral. The integrated dual charge pump generates the positive and negative voltage levels required by the RS-232 standard without external discrete capacitors.
The principal electrical characteristics visible in the manufacturer documentation include a 3 V to 5.5 V operating supply, single-channel driver and receiver operation, and ±15 kV ESD protection. The single-channel arrangement reduces board area and power consumption compared with multi-channel RS-232 transceivers. The 16-pin TSSOP package is also compatible with surface-mount manufacturing and supports compact serial-interface implementations.
The MAX3221CPWE4 uses an RS-232 line driver to convert TTL-compatible transmit data into bipolar line signaling and an RS-232 receiver to recover logic-compatible receive data. A dedicated receiver-enable function provides control over the receive path. Internal dual charge-pump circuitry supports the positive and negative voltage swings associated with RS-232 signaling while operating from a single low-voltage supply.
Typical applications include industrial serial-port equipment, data-acquisition systems, service-console interfaces, programmable instrumentation, and embedded control systems that need a compact RS-232 connection. It is particularly suitable when the logic system operates from 3.3 V or 5 V and an RS-232 port must be added without designing a separate high-voltage transmitter circuit.
A critical implementation consideration is the distinction between the low-voltage supply and the bipolar voltages generated on the RS-232 side. Decoupling must be placed close to the supply pins, and external charge-pump capacitors must follow the values and layout guidance in the manufacturer datasheet. The PCB should also provide appropriate isolation and return-path planning for the externally accessible serial connector.
This product page consolidates the exact-orderable part information, operating limits, package details, replacement guidance, and design-focused guidance that engineers need when evaluating the MAX3221CPWE4. It also provides a structured comparison with same-footprint MAX3221 variants so that temperature-grade, suffix, and sourcing decisions can be made without confusing electrical equivalence with PCB compatibility.
直接替換替代品,適用於 MAX3221CPWE4 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3221CPWE4 (相同外形與佔位) — 差異在於 Product Type, ESD Protection, Maximum Data Rate, Supply Voltage Range, Package.
MAX3221CPWRG4
✅ 直接替換聯絡詢價
查看資料表 →MAX3221IPWR
✅ 直接替換聯絡詢價
查看資料表 →MAX3221ECPWR
✅ 直接替換聯絡詢價
查看資料表 →MAX3221EUE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CUE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3221CPWE4 規格
| Product Type | Single-channel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Number of Drivers | 1 |
| Number of Receivers | 1 |
| ESD Protection | ±15 kV |
| Charge-Pump Configuration | Dual charge pump |
| Receiver Enable | Dedicated enable function |
| Package Type | 16-pin TSSOP |
| Package Width | 4.40 mm |
| 安裝類型 | Surface mount |
MAX3221CPWE4 4.40 mm 腳位配置指南
MAX3221CPWE4(4.40 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3221CPWE4.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3221CPWE4 適用於 6 應用s: Industrial Serial-Port Equipment, Embedded Data-Acquisition Systems, Programmable Test and Measurement, Service and Configuration Consoles, Control-System Service Ports, Portable and Battery-Powered Serial Adapters.
Industrial Serial-Port Equipment
The MAX3221CPWE4 fits compact industrial serial-port equipment that requires one RS-232 channel and operates from a 3.3 V or 5 V controller supply. Place the transceiver between the host logic and the DE-9 connector, using its integrated driver and receiver for the two signal directions. The documented 3 V to 5.5 V supply range supports modern embedded controllers, while ±15 kV ESD protection adds defense at an externally accessible interface. A single-channel design reduces package count compared with a multi-driver transceiver, although the exact temperature grade must satisfy the equipment enclosure’s ambient requirements.
推薦
Embedded Data-Acquisition Systems
The MAX3221CPWE4 is appropriate for an embedded data-acquisition controller that must communicate with an RS-232 instrument while running from a 3 V to 5.5 V system rail. Its one driver and one receiver provide a complete single-channel serial interface without a separate bipolar transceiver. The integrated dual charge pump supports the required positive and negative RS-232 signaling from a single supply. Confirm the supported data rate, slew behavior, and charge-pump capacitor values in the manufacturer datasheet before choosing it for instrumentation with long cables or unusually slow legacy ports.
推薦
Programmable Test and Measurement
The MAX3221CPWE4 can add a compact RS-232 control port to programmable laboratory and field-test equipment. The 16-pin TSSOP package saves board area beside a mixed-signal or control processor, and the 3 V to 5.5 V operating range allows direct use of common embedded supply levels. Connect the receiver-enable function to the host if the instrument needs controlled receive-state transitions. Validate the maximum supported data rate and temperature range against the test equipment’s operating environment before incorporating the interface into a new design.
推薦
Service and Configuration Consoles
The MAX3221CPWE4 suits service consoles, configuration adapters, and diagnostic interfaces that need a compact one-port RS-232 connection. A single transceiver can translate host UART logic into RS-232 levels and receive command responses through the same package. Its 16-pin TSSOP footprint supports dense controller boards, and the ±15 kV ESD rating is useful where the cable may be connected to external equipment. The designer should still provide connector-side grounding and protection appropriate to the enclosure and cable environment rather than treating the IC rating as complete system protection.
推薦
Control-System Service Ports
The MAX3221CPWE4 is suitable for a control-system service port where a processor already operates from 3.3 V or 5 V but maintenance personnel need RS-232 access. The integrated dual charge-pump circuitry avoids a discrete RS-232 voltage generator, while the dedicated receiver-enable function supports deterministic control of the receive path. Use the 16-pin TSSOP layout to minimize board area around the processor. Before deployment, confirm that the exact MAX3221CPWE4 grade covers the cabinet temperature and that the interface circuit meets the system’s isolation and surge requirements.
推薦
Portable and Battery-Powered Serial Adapters
The MAX3221CPWE4 can support low-power RS-232 adapters used with portable instruments, battery-operated field tools, and compact diagnostic equipment. Its 3 V minimum operating supply supports systems that cannot accommodate a 5 V-only RS-232 transceiver, and the single-channel format minimizes the number of pins and board area. The dedicated receiver enable can help the host reject unwanted serial activity when the adapter is idle. A battery-powered design should still evaluate the complete quiescent-current requirement and available charge-pump capacitor arrangement from the manufacturer datasheet.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3221CPWE4 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3221CPWRG4 | MAX3221IPWR | MAX3221ECPWR | MAX3221EUE+ | MAX3221CUE+ |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
主要差異化特點
- Single-channel implementation in a compact 16-pin TSSOP (對比MAX3221CPWRG4)
- Direct operation from standard low-voltage digital rails (對比MAX3221IPWR)
- Integrated interface protection and voltage generation (對比MAX3221ECPWR)
設計說明
Place the MAX3221CPWE4 beside the connector or cable-entry point and keep the RS-232 driver and receiver routes short. The 16-pin TSSOP footprint should be routed with a clear ground connection and no high-speed digital traces beneath the analog interface area. Confirm every net against the manufacturer pin-description table before release because the public part listing identifies the package but does not provide a transcribed pin map.
Connect a suitable supply-decoupling capacitor close to the device’s VCC and ground pins, then verify the final value against the manufacturer datasheet and layout example. The documented operating supply is 3 V to 5.5 V; do not treat the internally generated RS-232 voltage rails as logic rails. Validate the host UART logic levels separately because RS-232 driver outputs use bipolar voltage levels rather than direct 3.3 V or 5 V signaling.
Do not substitute a MAX3221 suffix solely because the package has 16 pins. Confirm pin functions, operating-temperature range, receiver-enable behavior, ESD rating, and qualification for each candidate. MAX3221CPWRG4 is the closest listed family candidate, while IPWR, ECPWR, EUE+, and CUE+ identify different ordering options whose exact limits must be compared with the manufacturer documentation before PCB substitution.
Keep charge-pump capacitor loops compact and connect them according to the recommended application diagram. Avoid routing the generated RS-232 current paths beneath sensitive analog or clock circuitry. At an external connector, provide suitable chassis or signal-ground strategy and additional protection appropriate to the cable environment; the IC’s ±15 kV ESD rating does not replace system-level surge, isolation, or enclosure design.
合規資訊
Compliance conclusions are not inferred from suffix naming. Confirm the current declarations for the exact MAX3221CPWE4 orderable part with the manufacturer.