Texas Instruments

MAX3221EIDBR - 250kbps 3V-5.5V RS-232 Transceiver | TI (Tape & Reel)

MPN: MAX3221EIDBR ✓ 啟用中
3V to 5.5V Vdss 16-SSOP (0.209 inch, 5.30mm width) Package
MOQ: 1 |

MAX3221EIDBR 概覽

Texas Instruments MAX3221EIDBR is a single-channel RS-232 line driver and receiver operating from a single 3V to 5.5V supply at up to 250kbps, with one transmitter, one receiver, and a 16-pin SSOP package. Its RS-232 connector-side pins provide IEC 61000-4-2 ESD protection, and the device meets TIA/EIA-232-F requirements.

An RS-232 transceiver is an interface IC that converts logic-level signals between a host controller and a serial port. The MAX3221E combines a differential line driver, receiver, dual charge-pump circuit, and automatic signal generation in one package. It occupies the interface ICs level within the broader communications and industrial-control hierarchy, where reliable voltage translation, electrostatic-discharge protection, and economical PCB integration are important.

The device provides one full-duplex RS-232 channel with a maximum data rate of 250kbps. Its single 3V to 5.5V supply operation allows use with both 3.3V and 5V systems. The integrated charge pump produces the bipolar voltage levels required by RS-232 while reducing the number of external components to four small capacitors. IEC 61000-4-2 protection on the serial-port connection pins adds protection where cables enter an enclosure.

The MAX3221E implements one driver and one receiver with a dedicated receiver-enable function. It provides the electrical interface between an asynchronous communication controller and an RS-232 connector while satisfying TIA/EIA-232-F requirements. This architecture suits point-to-point links that do not require multiple RS-232 channels, such as service-console, configuration-port, industrial-controller, and legacy peripheral connections.

Typical applications include single-port RS-232 adapters, programmable logic controller service interfaces, industrial control equipment, test fixtures, and embedded systems that retain a legacy serial connector. The 16-pin SSOP package supports compact, surface-mount PCB construction, while the 250kbps rate is suitable for moderate-speed asynchronous data transfer rather than high-bandwidth protocols.

Designers should follow the manufacturer’s recommended capacitor values and placement guidance for the charge-pump circuit. Keep the external capacitors close to their designated pins, route the RS-232 connector-side nets away from sensitive logic, and use a suitable protection network when cables extend beyond the protected board boundary. Verify that the host voltage levels and connector pin assignment match the selected logic family.

This product page combines the MAX3221EIDBR electrical characteristics, package details, available drop-in alternatives, comparison parameters, and application-specific design guidance. It is intended to accelerate component selection, PCB planning, and RS-232 interface qualification without requiring the reader to reconstruct the design trade-offs from separate listings.

直接替換替代品,適用於 MAX3221EIDBR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3221EIDBR (相同外形與佔位) — 差異在於 Package, Product Type, Number of Drivers, Number of Receivers, Supply Voltage Range.

Texas Instruments
Package: 16-pin SSOP
Product Type: Single-channel RS-232 line driver/receiver transceiver
Supply Voltage Range: 3 V to 5.5 V
比較對象 MAX3221EIDBR →
Texas Instruments
Package: 16-SSOP, 5.30 mm width
Product Type: Single-channel RS-232 line driver and receiver
Number of Drivers: 1 driver
比較對象 MAX3221EIDBR →
Texas Instruments
Package: 16-pin SSOP
Product Type: Single-channel RS-232 line driver and receiver
Supply Voltage Range: 3 V to 5.5 V
比較對象 MAX3221EIDBR →

MAX3221CDBR

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 16-SSOP (DB)
Single-channel RS-232 line driver/receiver transceiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · Full duplex · ±15 kV · Dual charge-pump circuit

聯絡詢價

查看資料表 →

MAX3221IDBR

✅ 直接替換
Texas Instruments
📦 16-SSOP (DB)
Single-channel RS-232 line driver and receiver · 3 V to 5.5 V · 250 kbps · 1 · 1 · ±15 kV HBM on serial-port connection pins, including GND · 1 µA · 4 × 0.1 µF

聯絡詢價

查看資料表 →

MAX3221ECDBRG4

✅ 直接替換
Texas Instruments
📦 16-SSOP (DB)
Single-channel RS-232 line driver and receiver · 1 driver · 1 receiver · 3 V to 5.5 V · RS-232; TIA/EIA-232-F compliant · ±15 kV · ±8 kV · ±15 kV

聯絡詢價

查看資料表 →

MAX3221EIDBR 規格

Product Type RS-232 line driver and receiver transceiver
Number of Drivers 1
Number of Receivers 1
資料速率 250kbps
Supply Voltage Range 3V to 5.5V
Interface Standard TIA/EIA-232-F
ESD Protection Standard IEC 61000-4-2
ESD Protection Voltage ±15kV
Charge Pumps 2
External Charge-Pump Capacitors 4
封裝 16-SSOP (0.209 inch, 5.30mm width)
安裝類型 Surface mount
Transceiver Type 1/1 full-duplex RS-232 transceiver

MAX3221EIDBR 16-ssop (0.209 inch, 5.30mm width) 腳位配置指南

MAX3221EIDBR(16-ssop (0.209 inch, 5.30mm width) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3221EIDBR 的 16-ssop (0.209 inch, 5.30mm width) 封裝腳位圖

無詳細腳位定義資料: MAX3221EIDBR.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3221EIDBR 適用於 6 應用s: Industrial Configuration Port, RS-232 Service Console, Legacy Peripheral Adapter, Test and Measurement Fixture, Security and Access Controller, Programmable Controller Communication.

🏭

Industrial Configuration Port

The MAX3221EIDBR fits a single industrial equipment configuration port that must communicate with a laptop or service controller over RS-232. Its 3V to 5.5V supply range supports both 3.3V and 5V embedded controllers, while the 250kbps rate is appropriate for command exchange, firmware transfer, and diagnostic records. The ±15kV IEC 61000-4-2 protection on the connector-side pins improves robustness when the port is accessed by field technicians. Designers should route the protected RS-232 traces directly toward the connector and maintain the recommended charge-pump capacitor placement.

🔧

RS-232 Service Console

The MAX3221EIDBR is appropriate for a service-console link between an embedded controller and an RS-232 diagnostic adapter. One driver and one receiver are sufficient for a full-duplex point-to-point connection, and the 250kbps data rate supports console commands, diagnostic logs, and configuration transactions. Operating from a single 3V to 5.5V rail simplifies interface design around contemporary embedded processors. The enhanced E-version ESD protection is especially useful where technicians connect external equipment directly to a field-accessible port.

🖥️

Legacy Peripheral Adapter

The MAX3221EIDBR can bridge a modern low-voltage controller and a legacy RS-232 peripheral without requiring a separate negative power rail. Its integrated dual charge pump generates the required bipolar line levels, while four external capacitors support the charge-pump circuit. The 16-pin SSOP package keeps the interface compact on densely populated controller boards. For an exposed legacy connector, the ±15kV IEC 61000-4-2 rating provides additional electrostatic-disense protection compared with a basic MAX3221 transceiver.

📡

Test and Measurement Fixture

The MAX3221EIDBR supports RS-232 control and logging functions in a test fixture where a computer communicates with instrumentation over a single serial channel. Its 250kbps maximum rate is more than adequate for command traffic and measured-data transfer, while the 3V to 5.5V supply range allows direct operation from common laboratory and embedded test-control rails. The protected connector-side pins add useful robustness when test leads are repeatedly attached. Keep the charge-pump components close to the device and separate the interface from sensitive analog measurement circuitry.

🎥

Security and Access Controller

The MAX3221EIDBR is suitable for a security controller that retains an RS-232 path for configuration, event logging, or integration with a higher-level access system. The single-driver, single-receiver arrangement supports full-duplex communication with a host while consuming little board space in a 16-pin SSOP package. Its single 3V to 5.5V supply simplifies connection to the controller’s digital rail, and the enhanced ESD protection improves interface resilience at an externally accessible port. Firmware updates should use a controlled protocol because RS-232 does not provide modern authentication or encryption.

🧩

Programmable Controller Communication

The MAX3221EIDBR connects a programmable controller to an RS-232 network or peripheral when one full-duplex channel is sufficient. The 250kbps rate supports telemetry, command exchange, and status polling, while the 3V to 5.5V operating range accommodates common embedded supply voltages. The target’s single-supply charge-pump design avoids a discrete negative rail and reduces external component count. For installations with severe conducted noise or long exposed cables, retain the connector-side ESD protection and validate signal integrity across the complete cable and grounding system.

What are the key specifications of MAX3221EIDBR that engineers should know?
The MAX3221EIDBR is a single-channel RS-232 transceiver that supports data rates up to 250kbps from a 3V to 5.5V supply. According to the Texas Instruments MAX3221E product information, it includes one driver, one receiver, a dual charge-pump circuit, four external capacitors, and ±15kV IEC 61000-4-2 protection on the RS-232 connector-side pins. The device is packaged in a 16-pin SSOP measuring 0.209 inch, or 5.30mm, in width.
What is the operating voltage of MAX3221EIDBR?
The MAX3221EIDBR operates from a single 3V to 5.5V supply. This range allows the interface to operate from either 3.3V or 5V system rails without a separate negative supply. According to the Texas Instruments MAX3221E product information, the integrated dual charge pump generates the bipolar voltage levels required by the RS-232 line interface while the device itself is powered from the single positive supply.
Where can I download the MAX3221EIDBR datasheet PDF?
The official MAX3221E datasheet and product information are available from Texas Instruments at https://www.ti.com/lit/gpn/MAX3221E. The document describes the 3V to 5.5V supply range, one driver and receiver, 250kbps operation, charge-pump circuitry, external-capacitor requirements, and IEC 61000-4-2 ESD protection. Use the manufacturer document as the authoritative source for pin assignments, application circuits, and production ordering information.
Where can I find the MAX3221EIDBR pinout?
The MAX3221EIDBR pinout is published in the Texas Instruments MAX3221E datasheet available at https://www.ti.com/lit/gpn/MAX3221E. The device uses a 16-pin SSOP package, but individual pin names are not reproduced here because the manufacturer pin-description table was not available in the retrieved product excerpt. Use the package drawing and pin-description table in that datasheet when assigning PCB tracks and connector signals.
What is the maximum data rate of MAX3221EIDBR?
The MAX3221EIDBR supports RS-232 data rates up to 250kbps. According to the Texas Instruments MAX3221 product page, the MAX3221 family is a 3V to 5.5V single-channel 250kbps RS-232 line driver and receiver. The MAX3221E adds ±15kV IEC 61000-4-2 ESD protection to the serial-port connection pins, making it appropriate for cable-connected equipment requiring stronger electrostatic-discharge protection.
What can replace the MAX3221EIDBR?
The closest identified replacements are the Texas Instruments MAX3221IDBR, MAX3221CDBR, and MAX3221ECDB, subject to checking the exact electrical and qualification requirements. MAX3221IDBR offers a similar single-channel 250kbps RS-232 architecture, MAX3221CDBR is listed as a related single-channel device, and MAX3221ECDB is reported as functionally equivalent in primary parameters. Confirm package pinout, ESD rating, temperature range, and lifecycle status before approving a substitution.
Is MAX3221EIDBR suitable for industrial RS-232 equipment?
The MAX3221EIDBR is suitable for many industrial RS-232 interfaces because it supports 3V to 5.5V operation, 250kbps data rates, TIA/EIA-232-F operation, and ±15kV IEC 61000-4-2 protection. Those electrical characteristics suit equipment with a single legacy serial port. For deployment across the full industrial temperature range or in a regulated vehicle environment, verify the specific ordering variant’s temperature rating and qualification status before release.
MAX3221EIDBR vs MAX3221IDBR - which is better for a new design?
Choose MAX3221EIDBR when the RS-232 connector pins require ±15kV IEC 61000-4-2 ESD protection; the MAX3221IDBR does not provide the enhanced E-version protection stated for the target. Both devices use the same single-channel RS-232 architecture and a 16-pin SSOP format. According to the Texas Instruments MAX3221E product information, the E version is intended for systems where protected connector-side pins improve interface robustness.
MAX3221EIDBR vs MAX3221ECDB - which is better for automotive or industrial use?
The MAX3221ECDB is the better candidate when automotive qualification is required, while the MAX3221EIDBR is appropriate for general industrial or commercial equipment not requiring that qualification. The two devices are reported as functionally equivalent across their primary technical parameters and share the 16-SSOP format. Final selection should still confirm temperature limits, ESD performance, qualification status, and lifecycle availability for the target equipment.
When should I choose MAX3221EIDBR over MAX3221CDBR?
Choose MAX3221EIDBR when the board requires ±15kV IEC 61000-4-2 protection on the RS-232 connector-side pins and uses a 3V to 5.5V supply. MAX3221CDBR is a related Texas Instruments single-channel RS-232 option, but its protection and operating details must be checked separately. The target is preferable for cable-accessible ports where electrostatic-discharge robustness is a primary design requirement.
Can MAX3221IDBR replace MAX3221EIDBR on an existing PCB?
The MAX3221IDBR may fit the same 16-SSOP footprint and provide a similar single-channel 250kbps RS-232 interface, but it is not automatically an electrical drop-in replacement. The MAX3221EIDBR provides ±15kV IEC 61000-4-2 protection on the serial-port pins, while the MAX3221IDBR requires separate review for that protection requirement. Verify the pinout, supply limits, receiver enable behavior, and system ESD requirements before substitution.
How many external capacitors does MAX3221EIDBR require?
The MAX3221EIDBR requires four small external capacitors for its charge-pump circuitry. According to the Texas Instruments MAX3221E product information, the dual charge pump uses these capacitors to support the bipolar voltage levels required by the RS-232 interface. Place each capacitor close to its designated package pin and follow the manufacturer’s application diagram for capacitance values and PCB layout.
Does MAX3221EIDBR include ESD protection?
Yes, the MAX3221EIDBR provides ±15kV IEC 61000-4-2 ESD protection on the RS-232 connector-side pins. According to the Texas Instruments MAX3221E product information, the protected pins include the serial-port connection pins and ground. This protection reduces system-design requirements at exposed connectors, although cable routing, enclosure design, and external protection should still be considered for severe industrial environments.
Is MAX3221EIDBR in stock and what is its lead time?
Stock and current lead time change by order quantity and market conditions, so confirm both through the Request a Quote form on this page. The manufacturer’s MAX3221E product information identifies the part as a current single-channel RS-232 interface, and the target is offered in a 16-pin SSOP package. Request the exact quantity, shipment destination, target date, and traceability requirements to obtain a firm commercial response.
Where to buy MAX3221EIDBR online and what is the price?
Use the Request a Quote form on this page to obtain current pricing, stock, minimum order quantity, and lead time for the MAX3221EIDBR. The target is specified as a Texas Instruments 16-SSOP single-channel RS-232 transceiver with a 3V to 5.5V supply and ±15kV IEC 61000-4-2 protection. A current quote should also confirm authorized sourcing, lot traceability, and the required delivery schedule.

工程參考資料,適用於 MAX3221EIDBR — 比較、設計指引及合規資訊。

選型指南

Choose MAX3221EIDBR for a single-channel RS-232 interface that operates from 3V to 5.5V, supports up to 250kbps, and benefits from ±15kV IEC 61000-4-2 protection on connector-side pins. It is particularly suitable for field-accessible service ports and industrial equipment where electrostatic discharge is a primary concern. MAX3221IDBR may suit a design that does not need the enhanced E-version protection, but its exact ESD performance must be verified. MAX3221CDBR is a related family option with a similar package and supply class, though protection and qualification requirements should be checked before reuse. MAX3221ECDB is preferable when an automotive-qualified ordering variant is required. For any alternative, confirm the 16-SSOP footprint, pin assignments, temperature range, charge-pump capacitor requirements, and lifecycle status before approving a BOM change.

與替代品比較

參數 本產品 MAX3221CDBR MAX3221IDBR MAX3221ECDB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SSOP (DB) 16-SSOP (DB) 16-SSOP (DB) 16-SSOP (DB)
Transceiver Configuration 1 driver / 1 receiver 1 driver / 1 receiver 1 driver / 1 receiver 1 driver / 1 receiver
Data Rate 250kbps 250kbps 250kbps 250kbps
Supply Voltage Range 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V

主要差異化特點

  • Enhanced connector-side ESD protection (對比MAX3221IDBR)
  • Single-supply operation across common logic rails (對比MAX3221CDBR)
  • General-purpose interface versus automotive qualification (對比MAX3221ECDB)

設計說明

Place the four charge-pump capacitors close to their designated MAX3221EIDBR pins and keep the associated traces short. Follow the Texas Instruments MAX3221E application diagram for capacitance values and route the charge-pump nets away from the RS-232 connector-side nets. Short charge-pump loops reduce radiated noise and help maintain stable line levels during data transmission.

Do not treat a matching 16-SSOP footprint as proof of drop-in compatibility. Before substituting MAX3221CDBR, MAX3221IDBR, or MAX3221ECDB, compare pin assignments, supply limits, receiver-enable behavior, ESD requirements, temperature range, and qualification status. The MAX3221EIDBR specifically provides ±15kV IEC 61000-4-2 protection on the RS-232 pins, so systems that rely on that rating need protection added if the replacement does not provide it.

Route the connector-side RS-232 signals as a compact interface directly toward the protection circuitry and connector, while keeping them separated from clocks, sensors, and high-impedance analog inputs. Connect the device ground and charge-pump capacitor ground to a low-impedance ground plane. This layout reduces susceptibility to ground bounce and prevents the interface’s switching activity from coupling into sensitive signal paths.

Treat the RS-232 cable as an external antenna and keep it away from internal high-impedance nodes. Use the integrated connector-side ESD protection as one part of the protection strategy rather than the only safeguard. For long or industrial cables, evaluate whether additional surge, common-mode, or cable-shield measures are required; the IEC 61000-4-2 rating addresses electrostatic discharge rather than every industrial transient source.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer information identifies IEC 61000-4-2 ESD protection and TIA/EIA-232-F interface compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.

相關搜尋

MAX3221EIDBR datasheet MAX3221EIDBR pinout MAX3221EIDBR datasheet pdf MAX3221EIDBR equivalent MAX3221EIDBR replacement MAX3221EIDBR cross reference MAX3221EIDBR vs MAX3221IDBR MAX3221EIDBR footprint MAX3221EIDBR application circuit Texas Instruments MAX3221EIDBR MAX3221EIDBR 250kbps RS-232 MAX3221EIDBR price MAX3221EIDBR stock MAX3221EIDBR SSOP-16

相關元件與詞彙

Texas Instruments MAX3221EIDBR MAX3221CDBR MAX3221IDBR MAX3221ECDB RS-232 transceiver line driver line receiver interface IC semiconductor TIA/EIA-232-F IEC 61000-4-2 ESD protection 3V to 5.5V power supply 250kbps data rate charge pump external capacitor 16-SSOP package surface mount RS-232 connector industrial control service console legacy peripheral test fixture full-duplex communication
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情