Analog Devices

MAX3243ECAI+TG1Z - 3V RS-232 Transceiver | Analog Devices

MPN: MAX3243ECAI+TG1Z ✓ 啟用中
3.0V to 5.5V Vdss 1 µA Id 28-pin SSOP Package
MOQ: 1 |

MAX3243ECAI+TG1Z 概覽

Analog Devices MAX3243ECAI+TG1Z is a 3-driver, 5-receiver RS-232 interface transceiver designed for 3V-powered serial communications. The device operates from 3.0V to 5.5V, supports data rates up to 120 kbit/s, and is housed in a 28-pin SSOP package. Its AutoShutdown feature reduces supply current to 1 µA when no valid receiver signal is present, while enhanced electrostatic-discharge protection helps protect ports exposed to cable transients.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic-compatible levels. It belongs to the line-driver and line-receiver hierarchy, connecting UART, microprocessor, or industrial-control logic to a cable-based serial port. The MAX3243 family is particularly useful when a design requires more than the standard two-transmitter, two-receiver arrangement and also needs low-power standby operation.

Key features include three active drivers, five receivers, and one always-active receiver intended for external monitoring. The 3.0V to 5.5V supply range supports both 3.3V and 5V systems. Automatic shutdown and wakeup reduce power when the connected equipment is inactive, while the always-active receiver permits monitoring without keeping the main transmitter circuitry powered. The 120 kbit/s data rate covers legacy RS-232 equipment and industrial serial links.

The MAX3243 uses charge-pump circuitry to generate the bipolar voltage levels required by RS-232 while operating from a single low-voltage supply. Its enhanced ESD protection is intended for interfaces connected to external cables, where electrostatic discharge and switching transients are more likely than on internal logic nets. Because the interface is not a differential communications standard, cable length, grounding, termination, and data direction must be considered during system integration.

Typical uses include industrial control consoles, laboratory equipment, POS terminals, printers, data-acquisition systems, and service interfaces. The five-receiver arrangement can support several incoming RS-232 connections, while the three drivers support outgoing channels. The always-active monitoring receiver is useful in systems that must detect a remote or peripheral status signal even when automatic shutdown has disabled the normal receiver bank.

Place the device close to the connector and route the exposed driver and receiver pins directly to the protected interface boundary. Keep logic-side traces away from cable-side pins, provide a stable ground reference, and follow the manufacturer application guidance for bypass capacitors and charge-pump capacitors. Verify signal polarity, direction, and shutdown behavior in firmware because these details determine how the transceiver should be enabled during communication.

This product page combines the manufacturer family description with package-specific identification, practical interface design guidance, selection criteria, and a verified list of drop-in alternatives. It is intended to help engineers confirm supply compatibility, understand receiver and driver assignments, and determine whether the MAX3243 feature set fits a particular RS-232 design before layout release.

直接替換替代品,適用於 MAX3243ECAI+TG1Z — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MAX3243ECAI+TG1Z (相同外形與佔位) — 差異在於 Product Type, Supply Voltage Range.

Analog Devices
Product Type: RS-232 transceiver
Supply Voltage Range: +3 V to +5.5 V
比較對象 MAX3243ECAI+TG1Z →
Maxim Integrated
Product Type: 3/5 RS-232 transceiver
Supply Voltage Range: 3.0V to 5.5V
比較對象 MAX3243ECAI+TG1Z →

MAX3243ECAI+

✅ 直接替換
Maxim Integrated
📦 28-pin SSOP
3/5 RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 · 5 · EIA/TIA-232 and V.28/V.24 · Yes · Yes

聯絡詢價

查看資料表 →

MAX3243ECAI+TG1Z 規格

Product Type 3/5 RS-232 transceiver
Driver Count 3 drivers
Receiver Count 5 receivers
Always-Active Receiver 1 complementary always-active receiver
Supply Voltage Range 3.0V to 5.5V
AutoShutdown Supply Current 1 µA
Maximum Data Rate 120 kbit/s
Communication Standard EIA/TIA-232, V.28/V.24
Electrostatic Discharge Protection Enhanced ESD protection
封裝 28-pin SSOP
安裝類型 Surface mount

MAX3243ECAI+TG1Z 28-pin ssop 腳位配置指南

MAX3243ECAI+TG1Z(28-pin ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

MAX3243ECAI+TG1Z 的 28-pin ssop 封裝腳位圖

無詳細腳位定義資料: MAX3243ECAI+TG1Z.

請參閱 資料表 以查看完整腳位配置。

典型應用

MAX3243ECAI+TG1Z 適用於 6 應用s: Industrial Control Console, Laboratory Data-Acquisition Equipment, POS Terminal and Printer Interface, Service and Configuration Port, Instrument Communication Hub, Legacy Equipment Upgrade.

🏭

Industrial Control Console

The MAX3243ECAI+TG1Z fits an industrial control console that must connect a low-voltage controller to several RS-232 peripherals. Its three driver channels can support outbound command or control connections, while five receivers allow multiple status inputs to be monitored. Operation from 3.0V to 5.5V permits use with either 3.3V logic or a 5V interface section, and the 120 kbit/s rate is appropriate for many legacy industrial protocols. The always-active receiver provides a monitoring path when normal AutoShutdown operation is desired. Designers should organize the circuit around cable-side ESD protection, a low-impedance ground reference, and the manufacturer-recommended bypass and charge-pump capacitors.

🔧

Laboratory Data-Acquisition Equipment

The MAX3243ECAI+TG1Z is useful in laboratory instruments that exchange commands and measurements with older RS-232 equipment. A three-driver configuration can provide separate transmit paths, while the five-receiver arrangement gives the instrument more incoming status channels than a basic 2/1 transceiver. The MAX3243 family operates from 3.0V to 5.5V and supports up to 120 kbit/s, matching many instrument-control interfaces. Automatic shutdown lowers supply current to 1 µA when receiver inputs remain inactive, which is beneficial in bench equipment with intermittent communication. The interface should be placed near the external connector so cable transients are not propagated into sensitive measurement circuitry.

🖥️

POS Terminal and Printer Interface

The MAX3243ECAI+TG1Z can support point-of-sale equipment with a mix of printer, reader, and service connections. Three drivers cover outbound channels, and the additional receivers can monitor equipment status without requiring several separate RS-232 interface packages. Its 120 kbit/s maximum data rate accommodates the serial communication speeds commonly used by legacy retail peripherals. Operating from 3.0V to 5.5V also allows the interface to share either 3.3V or 5V system rails. Because retail peripherals can expose long or poorly grounded cables, the PCB should keep the cable-side route short, include the required protection network, and maintain a common ground reference according to the manufacturer guidance.

🧩

Service and Configuration Port

The MAX3243ECAI+TG1Z is appropriate for a service port that combines command transmission with several diagnostic inputs. The three driver outputs can support configuration or control traffic, while five receiver inputs can collect readiness, fault, and interlock signals. The always-active receiver is especially valuable when an external monitor must remain responsive even if the principal receivers enter AutoShutdown. A supply range of 3.0V to 5.5V supports low-voltage embedded controllers, and the 1 µA shutdown current reduces standby demand. Firmware should explicitly control enable and shutdown behavior, and hardware should use separate protection and routing practices for logic-side and cable-side nets.

🌐

Instrument Communication Hub

The MAX3243ECAI+TG1Z fits a communication hub that must consolidate multiple RS-232 links around a processor or FPGA. Three drivers support outbound ports, and five receivers support inbound channels, reducing the number of separate transceiver packages needed. The 120 kbit/s rate is suitable for many legacy instrument links, while 3.0V-to-5.5V operation provides flexibility in mixed-voltage systems. The always-active monitoring receiver can track an external device without waking the main receiver bank. Engineers should assign directions explicitly, avoid simultaneous driver conflicts, and validate cable length, ground reference, and logic levels against each connected peripheral before deploying the hub.

🔧

Legacy Equipment Upgrade

The MAX3243ECAI+TG1Z can modernize a controller that must retain compatibility with legacy RS-232 equipment while using a 3.3V or 5V logic supply. The device provides three drivers, five receivers, enhanced ESD protection, automatic shutdown, and a maximum data rate of 120 kbit/s in a 28-pin SSOP. This combination allows a new controller to retain older peripheral connections without redesigning every cable and protocol. The transition should begin with a complete pinout comparison against the previous transceiver, followed by checks of receiver thresholds, driver polarity, shutdown timing, and external capacitor values. Field cabling should remain on the protected side of the connector.

What is the MAX3243ECAI+TG1Z?
The MAX3243ECAI+TG1Z is a 3.0V-to-5.5V RS-232 transceiver with three drivers, five receivers, and one complementary always-active receiver. According to the Analog Devices MAX3243 product page, the device is part of the MAX3221, MAX3223, and MAX3243 family of 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. It is packaged for surface-mount assembly in a 28-pin SSOP.
What is the operating voltage of MAX3243ECAI+TG1Z?
The MAX3243ECAI+TG1Z operates from 3.0V to 5.5V. This range allows the interface to operate from either 3.3V or 5V system rails without a separate 5V-only supply requirement. According to the Analog Devices MAX3243 family description, the MAX3243 is a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface with automatic shutdown and wakeup functions.
How many drivers and receivers does MAX3243ECAI+TG1Z have?
The MAX3243ECAI+TG1Z has three drivers and five receivers. The Analog Devices product page identifies the MAX3243 as a 3-driver, 5-receiver device and adds one complementary always-active receiver for external monitoring. This arrangement supports more incoming RS-232 channels than a conventional two-driver, two-receiver interface while retaining three outbound channels in the same 28-pin SSOP.
What data rate does MAX3243ECAI+TG1Z support?
The MAX3243ECAI+TG1Z supports data rates up to 120 kbit/s. According to the Maxim family description, the MAX3221, MAX3223, and MAX3243 are 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces with high data-rate capability. That rate is suitable for legacy RS-232 equipment, industrial terminals, and control links operating below the full UART speed limit.
Where can I download the MAX3243ECAI+TG1Z datasheet PDF?
The official MAX3243 documentation is available from the Analog Devices product page at https://www.analog.com/en/products/max3243.html. A component-specific PDF is also indexed at https://pdf.digi-electronics.com/pdf/1471/MAX3243ECAITG1Z-datasheet.pdf. Use the manufacturer datasheet for authoritative pin assignments, electrical limits, capacitor values, package dimensions, and ordering information for MAX3243ECAI+TG1Z.
Where is the MAX3243ECAI+TG1Z pinout located?
The MAX3243ECAI+TG1Z pinout is located in the pin-description section of the manufacturer MAX3243 datasheet and must be matched to the 28-pin SSOP footprint. The device combines three driver outputs, five receiver inputs, an always-active receiver, power, ground, and external charge-pump capacitor connections. Use the package drawing and pin table together because SSOP numbering is not interchangeable with other 28-pin packages.
What can replace the MAX3243ECAI+TG1Z?
The clearest same-family drop-in option identified for the MAX3243ECAI+TG1Z is the MAX3243ECAI+, which retains the MAX3243E electrical function and 28-pin SSOP interface while differing in ordering and packaging suffix. Any replacement should be checked for the same 28-pin SSOP footprint, 3.0V-to-5.5V operation, three drivers, five receivers, AutoShutdown behavior, and the 120 kbit/s data rate before PCB reuse is approved.
Is the MAX3243ECAI+TG1Z the same as MAX3221CAE+TG1Z?
The MAX3243ECAI+TG1Z and MAX3221CAE+TG1Z belong to the same 3V RS-232 interface family but do not have identical channel configurations. The MAX3243 provides three drivers and five receivers, whereas the MAX3221C is a 2/1 interface device. Their functional relationship is useful for common 3V RS-232 designs, but a direct PCB substitution requires a separate pin-to-pin and footprint comparison.
MAX3243ECAI+TG1Z vs MAX3243EEUI+T: which is better?
The MAX3243ECAI+TG1Z and MAX3243EEUI+T are both members of the MAX3243E family, but the comparison cannot be reduced to the ordering suffix alone. The MAX3243ECAI+TG1Z is identified in a 28-pin SSOP package, while the MAX3243EEUI+T designation represents a different package option. Select the variant whose package drawing, pin table, temperature range, and electrical limits exactly match the PCB.
When should I choose MAX3243ECAI+TG1Z over a 2/1 RS-232 transceiver?
Choose the MAX3243ECAI+TG1Z when the design needs three outbound RS-232 drivers and five inbound receivers in one 3V interface. A 2/1 transceiver is sufficient for a single RS-232 port but does not provide the same channel count. The MAX3243 also includes an always-active receiver for monitoring and AutoShutdown behavior that reduces supply current to 1 µA when no valid receiver activity is detected.
Is MAX3243ECAI+TG1Z suitable for an industrial RS-232 interface?
The MAX3243ECAI+TG1Z is suitable for 3V RS-232 interfaces where a design needs multiple drivers, multiple receivers, automatic power management, and enhanced ESD protection. Its 120 kbit/s maximum rate and 3.0V-to-5.5V supply range fit many industrial control and service interfaces. Confirm the exact operating-temperature grade and cable-protection requirements for the deployed environment before production release.
Where can I buy MAX3243ECAI+TG1Z and check its lead time?
Use the Request a Quote form on this page to request the current MAX3243ECAI+TG1Z price, stock position, minimum order quantity, and lead time. The manufacturer identifies the MAX3243 family as an active RS-232 interface product, but current commercial allocation should be confirmed through the quote workflow. This page does not publish a static price because commercial terms and availability can change.
How much does the MAX3243ECAI+TG1Z cost?
The current commercial price for MAX3243ECAI+TG1Z should be obtained through the Request a Quote form on this page. The device is a 28-pin SSOP RS-232 transceiver from Analog Devices, and its quotation can depend on quantity, packaging suffix, inventory, and delivery requirements. Request a quantity-specific quotation for the exact MAX3243ECAI+TG1Z ordering code rather than relying on a generic MAX3243 price.
Is MAX3243ECAI+TG1Z in stock?
Stock for MAX3243ECAI+TG1Z should be confirmed through the Request a Quote form on this page. The exact ordering code identifies a 28-pin SSOP device with three drivers and five receivers, but inventory status can change independently of the product family lifecycle. Include the required quantity, delivery date, and permissible alternates when requesting the current availability and lead time.
What are the key specifications of MAX3243ECAI+TG1Z engineers should know?
The MAX3243ECAI+TG1Z is a 3.0V-to-5.5V, 3/5 RS-232 transceiver in a 28-pin SSOP. According to the Analog Devices MAX3243 product page, it supports data rates up to 120 kbit/s, includes enhanced ESD protection, and reaches a 1 µA supply current through AutoShutdown when receiver inputs do not sense a valid signal. One complementary receiver remains active for external monitoring.
What is the best cross-brand equivalent for MAX3243ECAI+TG1Z?
No cross-brand drop-in equivalent was established for the MAX3243ECAI+TG1Z. The available cross-reference results identify parametric-matching tools and related MAX3221C or MAX3221EA devices, but they do not establish an exact 28-pin SSOP, pin-to-pin replacement with the same 3-driver, 5-receiver configuration. Treat any third-party substitute as a redesign candidate until its footprint, pinout, shutdown behavior, data rate, and channel assignments are independently verified.

工程參考資料,適用於 MAX3243ECAI+TG1Z — 比較、設計指引及合規資訊。

選型指南

Choose the MAX3243ECAI+TG1Z when a 3V system needs three RS-232 drivers, five receivers, automatic shutdown, and a 28-pin SSOP implementation. It is particularly suitable for industrial controllers, laboratory equipment, and legacy service interfaces that must monitor several incoming signals. The MAX3243ECAI+ is the closest listed alternative when the same MAX3243E function and package are needed but the TG1Z ordering suffix is not required. Do not substitute a MAX3221 device merely because it belongs to the same 3V RS-232 family; its 2/1 channel arrangement and pin configuration may not match the board. Any cross-brand candidate should replace the device only after its 28-pin SSOP footprint, pin assignments, 3.0V-to-5.5V range, 120 kbit/s rate, shutdown behavior, and ESD implementation have been verified against the manufacturer documentation.

與替代品比較

參數 本產品 MAX3243ECAI+
Package 28-pin SSOP 28-pin SSOP - same
Brand Analog Devices Analog Devices
Product Type 3/5 RS-232 transceiver 3/5 RS-232 transceiver
Driver Count 3 drivers 3 drivers
Receiver Count 5 receivers 5 receivers
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 120 kbit/s 120 kbit/s
AutoShutdown Supply Current 1 µA 1 µA
ESD Protection Enhanced ESD protection Enhanced ESD protection

主要差異化特點

  • Greater receiver count than a conventional 2/1 interface (對比MAX3221CAE+TG1Z)
  • Always-active monitoring receiver (對比MAX3243ECAI+)
  • Low-power automatic shutdown behavior (對比MAX3221EAE+TG1Z)

設計說明

Place the MAX3243ECAI+TG1Z close to the external connector and route driver and receiver pins directly toward the protected cable-side boundary. Keep the always-active monitoring receiver and logic-side inputs away from switching nodes and fast digital traces. Use a continuous ground reference beneath and around the interface area, and preserve the manufacturer's recommended bypass and charge-pump capacitor placement to minimize loop area.

Use the manufacturer's specified capacitor values and polarity for the charge-pump and supply bypass networks. The interface operates from 3.0V to 5.5V, so verify that the selected system rail remains within range during startup, shutdown, and regulator tolerance. Do not substitute capacitors without checking ESR, voltage rating, and stability because charge-pump behavior and supply current can be affected by component characteristics.

Do not treat the MAX3243 channel count as interchangeable with a 2/1 RS-232 transceiver even when both use 28-pin packages. Confirm each driver and receiver connection against the manufacturer pin table, including the complementary always-active receiver. Also verify enable and shutdown polarity in firmware, since an incorrectly controlled interface can prevent wakeup or leave a driver in an unexpected state.

External RS-232 cables can inject electrostatic-discharge and switching transients into the interface. Keep exposed connector nets short, provide the required protection network, and maintain a low-impedance return path to the interface ground. Avoid routing cable-side signals beneath sensitive logic or analog sections of the PCB, and test the complete assembled board under realistic cable lengths and grounding conditions.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit compliance declaration was identified in the product-specific information. AEC-Q100 is not applicable to this general-purpose RS-232 interface transceiver.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX3243ECAI+TG1Z datasheet MAX3243ECAI+TG1Z pinout MAX3243ECAI+TG1Z equivalent MAX3243ECAI+TG1Z replacement MAX3243ECAI+TG1Z price MAX3243ECAI+TG1Z stock Analog Devices MAX3243ECAI+TG1Z MAX3243ECAI+TG1Z 3V RS-232 MAX3243ECAI+TG1Z 28-SSOP MAX3243ECAI+TG1Z 120 kbit/s MAX3243ECAI+TG1Z industrial interface MAX3243ECAI+TG1Z datasheet pdf

相關元件與詞彙

Analog Devices MAX3243ECAI+TG1Z MAX3243ECAI+ MAX3221CAE+TG1Z MAX3221EAE+TG1Z RS-232 transceiver EIA/TIA-232 V.28/V.24 communications interface line transceiver line driver line receiver UART AutoShutdown 3.0V power 120 kbit/s data rate 1 µA shutdown current enhanced ESD protection 28-pin SSOP surface-mount package industrial control data acquisition POS terminal service interface RS-232 cable
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情