MAX3243EETJ+ - 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3243EETJ+ ✓ 啟用中MAX3243EETJ+ 概覽
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 differential voltage levels and converts received RS-232 signals back into logic levels. The MAX3243E belongs to the broader hierarchy of interface ICs, serial transceivers, line drivers and receivers, and semiconductor communication components. Its multiple drivers and receivers allow several unidirectional or bidirectional serial links to share one compact device.
Key features include three transmit outputs, five receive inputs, a 3.0V to 5.5V supply range, 1µA shutdown behavior, and automatic wakeup. The 250kbps maximum signaling rate supports data acquisition, industrial control, point-of-sale equipment, and embedded serial systems. A ±15kV ESD-rated interface helps protect equipment when connected cables are exposed to electrostatic discharge during installation or maintenance.
The MAX3243E is designed for 3V-powered systems and uses automatic shutdown to reduce supply current when no valid signal is present. Automatic wakeup can return the transceiver to an operating state when incoming data resumes, reducing repeated manual enable control. Its three-driver and five-receiver arrangement provides more receive channels than the MAX3221E and MAX3223E family members, making it useful where several status or control signals must be monitored.
Typical uses include industrial serial controllers, instrumentation, test and measurement equipment, security systems, and computer peripherals. In a point-of-sale terminal, the three transmitters can drive status indicators or service interfaces while the five receivers monitor keypad, sensor, and handshake signals. In an industrial controller, the device can bridge low-voltage logic and long RS-232 connections while its ESD protection reduces vulnerability to cable-borne transients.
Design the circuit with the voltage ratings and external-charge-pump requirements specified in the manufacturer datasheet. Place bypass capacitors close to the supply and charge-pump nodes, route protected RS-232 lines away from sensitive clocks and data traces, and confirm that the connector and cable interface provide the intended ESD and common-mode protection. Verify signal polarity and handshake behavior in software because automatic shutdown and wakeup can affect receiver state at startup.
This product page combines the manufacturer’s device specifications with practical RS-232 design guidance, compatible same-family alternatives, and a parameter-by-parameter comparison. It is intended to accelerate component selection while keeping the final engineering decision grounded in the official MAX3243E datasheet.
直接替換替代品,適用於 MAX3243EETJ+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3243EETJ+ (相同外形與佔位) — 差異在於 Package.
MAX3243EEAI+
✅ 直接替換聯絡詢價
查看資料表 →MAX3243EETJ-T
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3243EETJ+ 規格
| Product Type | RS-232 transceiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Duplex Type | Full duplex |
| Shutdown Supply Current | 1µA |
| ESD Protection | ±15kV |
| 工作溫度範圍 | -40°C to +85°C |
| 封裝 | 32-pin TQFN with exposed pad, 7x7mm |
| 安裝類型 | Surface mount |
| Transmitter Output Type | RS-232 |
| Receiver Input Type | RS-232 |
| Power-Saving Feature | Automatic shutdown and wakeup |
| Protocol Support | EIA/TIA-232 |
| Signal Standard | V.28/V.24 |
| Packing Method | Tube |
MAX3243EETJ+ 32-pin tqfn with exposed pad, 7x7mm 腳位配置指南
MAX3243EETJ+(32-pin tqfn with exposed pad, 7x7mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3243EETJ+.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3243EETJ+ 適用於 6 應用s: Industrial Serial Control, Point-of-Sale Terminal, Test and Measurement Equipment, Security and Surveillance Equipment, Data Acquisition Systems, Embedded Serial Gateway.
Industrial Serial Control
The MAX3243EETJ+ fits industrial controllers that exchange commands and status over RS-232. Its three transmitters support outbound control or status channels, while five receivers provide more monitoring inputs than a single-channel transceiver. Operation from 3.0V to 5.5V supports 3.3V and 5V embedded systems, and the 250kbps rate accommodates common serial-control protocols. The -40°C to +85°C range supports industrial-temperature equipment. Design the interface with suitable cable grounding, protection, and logic-level checks. Automatic shutdown and wakeup can lower standby consumption to 1µA, but firmware must account for wakeup latency and for receiver inputs that are interpreted as handshake or idle signals.
推薦
Point-of-Sale Terminal
The MAX3243EETJ+ is useful in point-of-sale terminals where several RS-232 peripherals share a compact interface. Three drivers can connect service, status, or printer-related channels, and five receivers can monitor keyboard, transaction, and equipment-status lines. The 250kbps maximum data rate provides margin for typical point-of-sale traffic, while the 3.0V-to-5.5V supply range allows integration with mixed embedded logic. Automatic shutdown and wakeup help a terminal reduce power when idle. Keep peripheral grounds and signal returns arranged to avoid ground-offset problems, and place the required bypass and charge-pump capacitors according to the manufacturer layout guidance. ESD protection helps the connector interface, but external surge and cable-protection design must suit the installation environment.
推薦
Test and Measurement Equipment
The MAX3243EETJ+ can connect laboratory instruments, data-logging equipment, and service interfaces through a single multi-channel RS-232 device. Five receiver inputs allow several status or handshake lines to be observed concurrently, while three transmitters support command, control, or alarm channels. The 250kbps rate is appropriate for instrument-control traffic that does not require modern high-speed serial standards. The -40°C to +85°C operating range supports equipment intended for controlled industrial environments. Automatic wakeup can restore communication after an idle interval, but test software should verify wakeup timing. Keep the RS-232 traces away from precision analog and clock circuitry, and use an appropriate ground and isolation strategy when the instrument connects to externally accessible equipment.
推薦
Security and Surveillance Equipment
The MAX3243EETJ+ is appropriate for access-control panels, surveillance equipment, and alarm controllers that need several RS-232 links in a compact board area. The 3/5 channel arrangement can connect multiple downstream devices while monitoring separate acknowledgement or tamper-status signals. Its ±15kV ESD protection is valuable because installed serial cables can be exposed to electrostatic discharge during servicing. The 3.0V-to-5.5V operating range supports embedded processors operating at either common logic level. Automatic shutdown reduces standby consumption when no communication is present, although security equipment may require the receiver to remain continuously active. Validate wakeup behavior, cable length, grounding, and enclosure discharge paths before deployment, and use surge protection beyond ESD if the installation includes severe transients.
推薦
Data Acquisition Systems
The MAX3243EETJ+ can serve as the legacy serial backbone of a data-acquisition system that combines a modern controller with RS-232 sensors or instruments. Its three transmitters support multiple command paths, and five receivers allow several ready, alarm, and data-ready signals to be monitored. The 250kbps maximum rate is sufficient for many low-bandwidth acquisition protocols, while 3.0V-to-5.5V operation simplifies interface to mixed controller rails. The exposed-pad TQFN package requires careful layout and adequate PCB copper for reliable thermal performance. Automatic wakeup may reduce power between measurement bursts, but acquisition timing must allow sufficient receiver wakeup time. Use shielded cabling, controlled ground returns, and separated routing between the RS-232 interface and sensitive measurement circuitry.
推薦
Embedded Serial Gateway
The MAX3243EETJ+ fits embedded gateways that translate between a modern processor and several RS-232 devices. Three driver channels can support separate downstream links, while five receiver channels can collect status from multiple nodes. The 250kbps rate is suitable for legacy device management and telemetry, and the 3.0V-to-5.5V range offers flexibility with processor and peripheral supply rails. Automatic shutdown and wakeup are valuable in remotely deployed equipment where inactive periods are common. Firmware should establish consistent framing and timeout behavior before relying on wakeup. The TQFN exposed pad should be connected according to the manufacturer’s land pattern and thermal guidance. Separate protected RS-232 routing from Ethernet, wireless, and high-speed memory signals to minimize coupling.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3243EETJ+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3243EEAI+ | MAX3243EETJ-T |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 32-pin TQFN with exposed pad, 7x7mm | 32-pin TQFN with exposed pad | 32-pin TQFN, 7x7mm |
| Device Type | RS-232 transceiver | RS-232 transceiver | 3/5 transceiver, full RS-232 |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps | 250kbps | 250kbps |
| Drivers / Receivers | 3 / 5 | 3 / 5 | 3 / 5 |
| Duplex | Full duplex | Full duplex | Full duplex |
| Shutdown Current | 1µA | 1µA | 1µA |
| ESD Protection | ±15kV | ±15kV | ±15kV |
| Power Management | Automatic shutdown and wakeup | Automatic shutdown and wakeup | Automatic shutdown and wakeup |
主要差異化特點
- Broader receive-channel capacity than a single-channel RS-232 interface (對比MAX232EIDR)
- Same core MAX3243E interface performance in a qualified family ordering code (對比MAX3243EEAI+)
- Higher specified maximum data rate than the 120kbps MAX3243E comparison listing (對比MAX3243EEWI+)
設計說明
Follow the manufacturer’s MAX3243E TQFN land pattern and exposed-pad connection instructions exactly. Place supply bypass capacitors and charge-pump capacitors close to their associated pins, and keep the exposed pad unobstructed by solder mask or assembly restrictions unless the package drawing explicitly permits it. Route RS-232 outputs and inputs away from sensitive analog, clock, and high-speed data paths. The exposed pad also provides a thermal path, so preserve useful copper area on both sides of the board when the layout allows.
Account for automatic shutdown and wakeup timing in the system protocol. A receiver may not present its expected state immediately after an idle interval, which can affect handshake interpretation or edge detection. Establish a timeout, identify valid inactive levels in firmware, and avoid treating every wakeup transition as a valid command. The 250kbps maximum rate is a device capability rather than a guarantee of usable throughput, so verify the intended baud rate, cable length, grounding, and receiver load in the final system.
Do not assume that ±15kV ESD protection replaces connector-level surge protection for every installation. Consider the cable length, connector type, grounding arrangement, and exposure to lightning or large switching transients. RS-232 is unbalanced, so ground offsets can affect receiver operation; do not leave the interface ground disconnected. Also avoid substituting a package variant solely by its TQFN label. Confirm the pin count, body size, exposed pad, temperature grade, and ordering suffix before approving a replacement.
Keep the charge-pump network and its switching current path compact, and connect bypass returns directly to the device ground pins rather than routing return current through a broad peripheral path. Maintain the datasheet-specified capacitor values and tolerances because these components establish the internal voltage levels used by the drivers. If the RS-232 port shares a cable bundle with motors, relays, or switching power circuits, use suitable filtering and separation at the connector to prevent common-mode disturbances from reaching the receiver inputs.
合規資訊
The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The MAX3243EETJ+ is an industrial-temperature interface IC, but AEC-Q100 qualification is not indicated.