Analog Devices

MAX3243EETJ+ - 250kbps RS-232 Transceiver | Analog Devices

부품 번호: MAX3243EETJ+ ✓ 활성
3.0V to 5.5V Vdss 1µA Id 32-pin TQFN with exposed pad, 7x7mm Package
MOQ: 1 |

MAX3243EETJ+ 개요

The Analog Devices MAX3243EETJ+ is a 3.0V to 5.5V RS-232 transceiver with three drivers and five receivers, automatic shutdown and wakeup, enhanced electrostatic-discharge protection, and a maximum data rate of 250kbps in a 32-pin TQFN package. The interface operates across -40°C to +85°C and provides ±15kV ESD protection.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 differential voltage levels and converts received RS-232 signals back into logic levels. The MAX3243E belongs to the broader hierarchy of interface ICs, serial transceivers, line drivers and receivers, and semiconductor communication components. Its multiple drivers and receivers allow several unidirectional or bidirectional serial links to share one compact device.

Key features include three transmit outputs, five receive inputs, a 3.0V to 5.5V supply range, 1µA shutdown behavior, and automatic wakeup. The 250kbps maximum signaling rate supports data acquisition, industrial control, point-of-sale equipment, and embedded serial systems. A ±15kV ESD-rated interface helps protect equipment when connected cables are exposed to electrostatic discharge during installation or maintenance.

The MAX3243E is designed for 3V-powered systems and uses automatic shutdown to reduce supply current when no valid signal is present. Automatic wakeup can return the transceiver to an operating state when incoming data resumes, reducing repeated manual enable control. Its three-driver and five-receiver arrangement provides more receive channels than the MAX3221E and MAX3223E family members, making it useful where several status or control signals must be monitored.

Typical uses include industrial serial controllers, instrumentation, test and measurement equipment, security systems, and computer peripherals. In a point-of-sale terminal, the three transmitters can drive status indicators or service interfaces while the five receivers monitor keypad, sensor, and handshake signals. In an industrial controller, the device can bridge low-voltage logic and long RS-232 connections while its ESD protection reduces vulnerability to cable-borne transients.

Design the circuit with the voltage ratings and external-charge-pump requirements specified in the manufacturer datasheet. Place bypass capacitors close to the supply and charge-pump nodes, route protected RS-232 lines away from sensitive clocks and data traces, and confirm that the connector and cable interface provide the intended ESD and common-mode protection. Verify signal polarity and handshake behavior in software because automatic shutdown and wakeup can affect receiver state at startup.

This product page combines the manufacturer’s device specifications with practical RS-232 design guidance, compatible same-family alternatives, and a parameter-by-parameter comparison. It is intended to accelerate component selection while keeping the final engineering decision grounded in the official MAX3243E datasheet.

드롭인 대체품: MAX3243EETJ+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MAX3243EETJ+ (동일 폼 팩터 및 풋프린트) — 차이점: Package.

Analog Devices
Package: 28-pin SSOP
비교 대상: MAX3243EETJ+ →

MAX3243EEAI+

✅ 드롭인
Analog Devices
📦 32-pin TQFN with exposed pad
RS-232 transceiver · 3 channels · 5 channels · Full duplex · 3.0V to 5.5V · 250kbps · ±15kV · RS-232 / EIA/TIA-232

가격 문의

데이터시트 보기 →

MAX3243EETJ-T

✅ 드롭인
📦 32-pin TQFN with exposed pad
Same MAX3243E device and 32-TQFN 7x7mm package; differs only in the distributor ordering suffix representation, with identical 3.0V to 5.5V, 3/5-channel, and 250kbps key ratings

📋 참조 대체품 (카탈로그에 없음)

MAX3243EETJ+ 사양

Product Type RS-232 transceiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
Number of Drivers 3
Number of Receivers 5
Duplex Type Full duplex
Shutdown Supply Current 1µA
ESD Protection ±15kV
동작 온도 범위 -40°C to +85°C
패키지 32-pin TQFN with exposed pad, 7x7mm
실장 유형 Surface mount
Transmitter Output Type RS-232
Receiver Input Type RS-232
Power-Saving Feature Automatic shutdown and wakeup
Protocol Support EIA/TIA-232
Signal Standard V.28/V.24
Packing Method Tube

MAX3243EETJ+ 32-pin tqfn with exposed pad, 7x7mm 핀 구성 가이드

MAX3243EETJ+(32-pin tqfn with exposed pad, 7x7mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX3243EETJ+의 32-pin tqfn with exposed pad, 7x7mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX3243EETJ+.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX3243EETJ+ 적합 용도: 6 애플리케이션s: Industrial Serial Control, Point-of-Sale Terminal, Test and Measurement Equipment, Security and Surveillance Equipment, Data Acquisition Systems, Embedded Serial Gateway.

🏭

Industrial Serial Control

The MAX3243EETJ+ fits industrial controllers that exchange commands and status over RS-232. Its three transmitters support outbound control or status channels, while five receivers provide more monitoring inputs than a single-channel transceiver. Operation from 3.0V to 5.5V supports 3.3V and 5V embedded systems, and the 250kbps rate accommodates common serial-control protocols. The -40°C to +85°C range supports industrial-temperature equipment. Design the interface with suitable cable grounding, protection, and logic-level checks. Automatic shutdown and wakeup can lower standby consumption to 1µA, but firmware must account for wakeup latency and for receiver inputs that are interpreted as handshake or idle signals.

🏬

Point-of-Sale Terminal

The MAX3243EETJ+ is useful in point-of-sale terminals where several RS-232 peripherals share a compact interface. Three drivers can connect service, status, or printer-related channels, and five receivers can monitor keyboard, transaction, and equipment-status lines. The 250kbps maximum data rate provides margin for typical point-of-sale traffic, while the 3.0V-to-5.5V supply range allows integration with mixed embedded logic. Automatic shutdown and wakeup help a terminal reduce power when idle. Keep peripheral grounds and signal returns arranged to avoid ground-offset problems, and place the required bypass and charge-pump capacitors according to the manufacturer layout guidance. ESD protection helps the connector interface, but external surge and cable-protection design must suit the installation environment.

🔧

Test and Measurement Equipment

The MAX3243EETJ+ can connect laboratory instruments, data-logging equipment, and service interfaces through a single multi-channel RS-232 device. Five receiver inputs allow several status or handshake lines to be observed concurrently, while three transmitters support command, control, or alarm channels. The 250kbps rate is appropriate for instrument-control traffic that does not require modern high-speed serial standards. The -40°C to +85°C operating range supports equipment intended for controlled industrial environments. Automatic wakeup can restore communication after an idle interval, but test software should verify wakeup timing. Keep the RS-232 traces away from precision analog and clock circuitry, and use an appropriate ground and isolation strategy when the instrument connects to externally accessible equipment.

📹

Security and Surveillance Equipment

The MAX3243EETJ+ is appropriate for access-control panels, surveillance equipment, and alarm controllers that need several RS-232 links in a compact board area. The 3/5 channel arrangement can connect multiple downstream devices while monitoring separate acknowledgement or tamper-status signals. Its ±15kV ESD protection is valuable because installed serial cables can be exposed to electrostatic discharge during servicing. The 3.0V-to-5.5V operating range supports embedded processors operating at either common logic level. Automatic shutdown reduces standby consumption when no communication is present, although security equipment may require the receiver to remain continuously active. Validate wakeup behavior, cable length, grounding, and enclosure discharge paths before deployment, and use surge protection beyond ESD if the installation includes severe transients.

📟

Data Acquisition Systems

The MAX3243EETJ+ can serve as the legacy serial backbone of a data-acquisition system that combines a modern controller with RS-232 sensors or instruments. Its three transmitters support multiple command paths, and five receivers allow several ready, alarm, and data-ready signals to be monitored. The 250kbps maximum rate is sufficient for many low-bandwidth acquisition protocols, while 3.0V-to-5.5V operation simplifies interface to mixed controller rails. The exposed-pad TQFN package requires careful layout and adequate PCB copper for reliable thermal performance. Automatic wakeup may reduce power between measurement bursts, but acquisition timing must allow sufficient receiver wakeup time. Use shielded cabling, controlled ground returns, and separated routing between the RS-232 interface and sensitive measurement circuitry.

🌐

Embedded Serial Gateway

The MAX3243EETJ+ fits embedded gateways that translate between a modern processor and several RS-232 devices. Three driver channels can support separate downstream links, while five receiver channels can collect status from multiple nodes. The 250kbps rate is suitable for legacy device management and telemetry, and the 3.0V-to-5.5V range offers flexibility with processor and peripheral supply rails. Automatic shutdown and wakeup are valuable in remotely deployed equipment where inactive periods are common. Firmware should establish consistent framing and timeout behavior before relying on wakeup. The TQFN exposed pad should be connected according to the manufacturer’s land pattern and thermal guidance. Separate protected RS-232 routing from Ethernet, wireless, and high-speed memory signals to minimize coupling.

Where can I download the MAX3243EETJ+ datasheet PDF?
The MAX3243EETJ+ datasheet and product information are available from Analog Devices on the official MAX3243E product page. The page identifies the MAX3243E as a 3.0V-powered EIA/TIA-232 and V.28/V.24 communications interface with automatic shutdown, wakeup, high data-rate capability, and enhanced ESD protection. Use the manufacturer datasheet for the complete electrical characteristics, pin descriptions, charge-pump circuit, and application information.
What are the key specifications of MAX3243EETJ+ that engineers should know?
The MAX3243EETJ+ is a 3.0V to 5.5V RS-232 transceiver rated for 250kbps operation. It provides three transmitters, five receivers, full-duplex operation, 1µA shutdown current, automatic shutdown and wakeup, and ±15kV ESD protection. According to the Analog Devices MAX3243E product page, all transmitter outputs and receiver inputs are protected, while the -40°C to +85°C temperature range supports industrial-temperature equipment.
What is the MAX3243EETJ+ package and pin count?
The MAX3243EETJ+ uses a 32-pin TQFN package with an exposed pad and a 7x7mm footprint. DigiKey identifies the device as a three-driver, five-receiver full-RS-232 transceiver in a 32-TQFN package. The exposed thermal pad is an electrical and thermal connection point, so its PCB footprint and assembly requirements must follow the manufacturer’s land-pattern guidance rather than treating it as an unused lead.
Where can I find the MAX3243EETJ+ pinout?
The authoritative MAX3243EETJ+ pinout is shown in the Analog Devices MAX3243E manufacturer datasheet under the pin-description and package diagrams. Assign PCB tracks from that pin-description table, including the exposed-pad connection, supply pins, charge-pump nodes, driver outputs, and receiver inputs. Because the package uses 32 terminals, the pin numbering and exposed pad must also be checked against the selected TQFN land pattern during layout review.
Can MAX3243EETJ+ operate from a 3.3V supply?
Yes, the MAX3243EETJ+ can operate from a 3.3V supply because its specified supply-voltage range is 3.0V to 5.5V. The device is therefore suitable for 3.3V embedded systems as well as 5V systems. Keep the supply within the manufacturer’s operating limits and implement the required bypass capacitance near the device to maintain stable charge-pump operation and minimize supply disturbance.
What is the maximum data rate of MAX3243EETJ+?
The MAX3243EETJ+ supports a maximum signaling rate of 250kbps. According to the Analog Devices MAX3243E product page, the MAX3243E family provides high data-rate capability for EIA/TIA-232 communications. Actual application throughput can be lower because of protocol overhead, cable characteristics, grounding, signal conditioning, and the latency introduced by receiver and transmitter behavior.
What does automatic shutdown and wakeup do on MAX3243EETJ+?
Automatic shutdown and wakeup reduce power demand while preserving the possibility of returning to operation when serial activity resumes. The MAX3243EETJ+ has a specified 1µA shutdown current, making automatic control useful in battery-operated or intermittently connected systems. Firmware should still account for receiver-state and wakeup timing, particularly when a system interprets a particular input condition as an end-of-message or connection status.
Where can I buy MAX3243EETJ+ and check current availability?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and order quantity for MAX3243EETJ+. The component is identified as a 32-TQFN RS-232 transceiver by Analog Devices. The quote form provides a single channel for current commercial information and avoids presenting a changing inventory quantity or purchase condition as a permanent product attribute.
What is the price of MAX3243EETJ+?
The current price of MAX3243EETJ+ is obtained through the Request a Quote form on this page. Pricing depends on quantity, package configuration, order condition, and current market availability. The component is also identified under the exact MAX3243EETJ+ ordering code by major suppliers, which helps prevent comparison with the non-plus temperature or packing designation by mistake.
What is the lead time for MAX3243EETJ+?
Request the current lead time for MAX3243EETJ+ through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing schedule, package readiness, and current supply conditions. For production planning, request the quantity-specific schedule and confirm whether the order will use the tube packing method identified for this 32-pin TQFN device.
Is MAX3243EETJ+ in stock?
The current stock status for MAX3243EETJ+ should be confirmed through the Request a Quote form on this page. The device is shown as an active Analog Devices RS-232 transceiver, but active lifecycle status does not by itself guarantee inventory at every quantity. A quotation response should confirm stock, scheduled delivery, and the exact MAX3243EETJ+ ordering code.
MAX3243EETJ+ vs MAX3243EEAI+ — which is better for industrial equipment?
MAX3243EETJ+ and MAX3243EEAI+ are both MAX3243E-family 3.0V-to-5.5V RS-232 transceivers with three drivers, five receivers, automatic shutdown, and enhanced ESD protection. The MAX3243EEAI+ comparison identifies an active 3/5 full-duplex RS-232 transceiver with 250kbps capability. Final selection should compare the exact temperature grade, package, exposed-pad details, and orderable suffix in the manufacturer datasheets before treating one as interchangeable.
Is MAX3243EETJ+ the same as MAX3243EEAI+?
No, MAX3243EETJ+ and MAX3243EEAI+ are related ordering codes but are not necessarily identical temperature-grade or package variants. Both are described as MAX3243E 3/5 transceivers for RS-232 with 3.0V to 5.5V operation, automatic shutdown, and 250kbps capability. Treat them as alternatives only after checking the exact pinout, package dimensions, temperature grade, tape-and-tube code, and exposed-pad requirement against the original design.
When should I choose MAX3243EETJ+ over MAX3243EEAI+?
Choose MAX3243EETJ+ when the original design specifically requires the MAX3243EETJ+ ordering code, 32-pin 7x7mm TQFN footprint, and -40°C to +85°C operating range. Consider MAX3243EEAI+ when its manufacturer-defined temperature grade and package details satisfy the product requirements and it is a qualified second source. The 3/5-driver architecture, 250kbps rate, automatic shutdown, and ±15kV ESD protection make the two devices functionally close, but suffix-specific qualification remains essential.
Is MAX3243EETJ+ suitable for industrial control and instrumentation?
Yes, MAX3243EETJ+ is suitable for many industrial control and instrumentation interfaces because it supports 3.0V to 5.5V operation, 250kbps signaling, ±15kV ESD protection, and a -40°C to +85°C operating range. Its three transmitters and five receivers suit mixed command and status connections. The RS-232 cable length, grounding, isolation, EMC environment, and shutdown/wakeup timing must still be validated at the system level.
What can replace MAX3243EETJ+?
The closest supported same-family starting point is MAX3243EEAI+, which is identified as a 3/5 full-duplex RS-232 transceiver with the same 3.0V-to-5.5V supply range, automatic shutdown, and 250kbps class. A true drop-in replacement also requires the identical 32-pin TQFN footprint, exposed-pad arrangement, temperature grade, and pin-level behavior. Review the exact ordering suffix and datasheet before approving it for production.

엔지니어링 참조 데이터: MAX3243EETJ+ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX3243EETJ+ when an industrial or embedded system needs a compact multi-channel RS-232 interface with three transmitters, five receivers, 250kbps operation, and a 3.0V-to-5.5V supply. It is especially useful when several status or handshake lines must be monitored but the system has limited board area. MAX3243EEAI+ is a close same-family alternative when its exact temperature grade, package code, exposed-pad arrangement, and qualification meet the product plan. MAX3232ECDR or MAX3232CDBR may fit simpler low-voltage or 5V serial designs, but they do not provide the same 3/5-channel arrangement. MAX232EIDR is appropriate for point-to-point interfaces where a single transceiver is sufficient. Before approving any substitution, verify pin-level compatibility, package dimensions, exposed-pad treatment, temperature range, automatic wakeup behavior, charge-pump capacitors, and the exact manufacturer ordering suffix. The listed alternatives are same-brand options; no independently verified cross-brand, same-footprint drop-in part was identified.

대체품과의 비교

파라미터 이 제품 MAX3243EEAI+ MAX3243EETJ-T
Brand Analog Devices Analog Devices Analog Devices
Package 32-pin TQFN with exposed pad, 7x7mm 32-pin TQFN with exposed pad 32-pin TQFN, 7x7mm
Device Type RS-232 transceiver RS-232 transceiver 3/5 transceiver, full RS-232
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 250kbps 250kbps 250kbps
Drivers / Receivers 3 / 5 3 / 5 3 / 5
Duplex Full duplex Full duplex Full duplex
Shutdown Current 1µA 1µA 1µA
ESD Protection ±15kV ±15kV ±15kV
Power Management Automatic shutdown and wakeup Automatic shutdown and wakeup Automatic shutdown and wakeup

주요 차별점

  • Broader receive-channel capacity than a single-channel RS-232 interface (vs MAX232EIDR)
  • Same core MAX3243E interface performance in a qualified family ordering code (vs MAX3243EEAI+)
  • Higher specified maximum data rate than the 120kbps MAX3243E comparison listing (vs MAX3243EEWI+)

설계 노트

Follow the manufacturer’s MAX3243E TQFN land pattern and exposed-pad connection instructions exactly. Place supply bypass capacitors and charge-pump capacitors close to their associated pins, and keep the exposed pad unobstructed by solder mask or assembly restrictions unless the package drawing explicitly permits it. Route RS-232 outputs and inputs away from sensitive analog, clock, and high-speed data paths. The exposed pad also provides a thermal path, so preserve useful copper area on both sides of the board when the layout allows.

Account for automatic shutdown and wakeup timing in the system protocol. A receiver may not present its expected state immediately after an idle interval, which can affect handshake interpretation or edge detection. Establish a timeout, identify valid inactive levels in firmware, and avoid treating every wakeup transition as a valid command. The 250kbps maximum rate is a device capability rather than a guarantee of usable throughput, so verify the intended baud rate, cable length, grounding, and receiver load in the final system.

Do not assume that ±15kV ESD protection replaces connector-level surge protection for every installation. Consider the cable length, connector type, grounding arrangement, and exposure to lightning or large switching transients. RS-232 is unbalanced, so ground offsets can affect receiver operation; do not leave the interface ground disconnected. Also avoid substituting a package variant solely by its TQFN label. Confirm the pin count, body size, exposed pad, temperature grade, and ordering suffix before approving a replacement.

Keep the charge-pump network and its switching current path compact, and connect bypass returns directly to the device ground pins rather than routing return current through a broad peripheral path. Maintain the datasheet-specified capacitor values and tolerances because these components establish the internal voltage levels used by the drivers. If the RS-232 port shares a cable bundle with motors, relays, or switching power circuits, use suitable filtering and separation at the connector to prevent common-mode disturbances from reaching the receiver inputs.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product information does not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The MAX3243EETJ+ is an industrial-temperature interface IC, but AEC-Q100 qualification is not indicated.

데이터 검증일: 2026-11-17 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX3243EETJ+ datasheet MAX3243EETJ+ pinout MAX3243EETJ+ datasheet pdf MAX3243EETJ+ price MAX3243EETJ+ stock MAX3243EETJ+ equivalent MAX3243EETJ+ replacement MAX3243EETJ+ vs MAX3243EEAI+ MAX3243EETJ+ TQFN-32 pinout MAX3243EETJ+ application circuit Analog Devices MAX3243EETJ+ MAX3243EETJ+ 250kbps RS-232

관련 부품 & 용어

Analog Devices Maxim Integrated MAX3243EETJ+ MAX3243EEAI+ MAX3243EETJ-T MAX3243EEWI+ MAX232EIDR MAX3232ECDR MAX3232CDBR RS-232 transceiver interface IC line driver line receiver EIA/TIA-232 V.28 V.24 automatic shutdown automatic wakeup ESD protection charge pump TQFN-32 exposed pad surface mount industrial control data acquisition
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기