Maxim Integrated

MAX324CUA+ - Dual NC SPST Analog Switch | Maxim Integrated

MPN: MAX324CUA+ ✓ 啟用中
2.7V to 16V Vdss 60 ohm Rds(on) 8-pin uMAX Package
MOQ: 1 |

MAX324CUA+ 概覽

Maxim Integrated MAX324CUA+ is a dual, single-pole single-throw analog switch with normally closed contacts, 60 ohm on-resistance, 1:1 signal routing, and operation from 2.7V to 16V in an 8-pin uMAX package. The MAX324 family is designed for precision, single-supply analog signal switching.

An analog switch is an integrated semiconductor device that routes an electrical signal between terminals under digital control. The MAX324CUA+ belongs to the analog switch category, which sits within interface ICs and broader semiconductor signal-routing systems. Unlike a mechanical relay, it provides compact electronic switching with specified transition timing and low on-resistance. Each internal switch provides a 1:1 connection between its two signal terminals when enabled.

The device contains two independent normally closed SPST switches. Their normally closed behavior means the associated signal path remains connected when the control state is inactive, which distinguishes the MAX324 from the normally open MAX323 family. The 60 ohm on-resistance, 100 ns turn-on time, and 150 ns turn-off time define useful operating characteristics for precision analog routing.

Single-supply operation from 2.7V to 16V allows the MAX324CUA+ to work with low-voltage control systems as well as higher-voltage analog rails. The control interface supports digital command of the two switches while the switched paths handle analog signals. Because it is an analog switch IC rather than a power MOSFET or regulator, its SOA is not applicable and its primary design concerns are signal integrity, control timing, and off-state behavior.

Typical uses include battery-powered instrumentation, sensor signal routing, test-equipment input selection, precision measurement systems, and compact industrial or medical control boards. The 8-pin uMAX package reduces board area, while the dual-switch configuration can control two analog channels from one device. Its 0°C to 70°C commercial temperature rating suits equipment expected to operate within controlled indoor or industrial enclosure environments.

When laying out a board, keep the switched analog traces short and place input and output protection close to the external connectors. Confirm that the inactive-state connection matches the circuit's normally closed requirement and check that control timing does not create an unintended transient during switching. This page also organizes functional comparisons and package-specific replacement information for engineers evaluating an existing MAX324 footprint.

直接替換替代品,適用於 MAX324CUA+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

MAX324EUA+

✅ 直接替換
📦 8-pin uMAX
Same uMAX-8 package and matching terminals; temperature-grade ordering differs while the core dual normally closed SPST configuration remains unchanged.

📋 參考替代品(不在目錄中)

MAX324CUA+ 最大額定值與電氣特性

Number of Switches 2 circuits
Switch Configuration 1:1
Switch Type Dual SPST
Default Contact State Normally closed
On-Resistance 60 ohm
Supply Voltage Range 2.7V to 16V
Turn-On Time 100 ns
Turn-Off Time 150 ns
工作溫度範圍 0°C to 70°C
封裝 8-pin uMAX
Package Type uMAX/uSOP
安裝類型 Surface mount
RoHS 狀態 Compliant
Signal Routing Ratio 1:1
腳位數 8 pins
類別 Analog switch IC
Supply Type Single supply
SAFE Operating Area Not applicable

MAX324CUA+ 腳位配置

MSOP-8 Package Pinout Diagram MSOP-8 3x3mm, P0.65mm, JEDEC MO-187. 1 8 2 7 3 6 4 5 MSOP-8
腳位 1 S1 — Switch 1 signal terminal
腳位 2 D1 — Switch 1 drain-side signal terminal
腳位 3 V+ — Positive supply input
腳位 4 GND — Ground
腳位 5 D2 — Switch 2 drain-side signal terminal
腳位 6 S2 — Switch 2 signal terminal
腳位 7 IN — Control input
腳位 8 OUT — Control-status output

典型應用

MAX324CUA+ 適用於 6 應用s: Battery-Powered Sensor Signal Routing, Precision Test and Measurement Inputs, Industrial Control Signal Selection, Medical Monitoring Signal Switching, Portable Instrument Signal Isolation, Data Acquisition Front-End Switching.

🧩

Battery-Powered Sensor Signal Routing

The MAX324CUA+ fits low-voltage sensor-selection circuits because it operates from 2.7V to 16V and provides two 1:1 analog paths. Each normally closed SPST switch can connect an analog sensor line to a measurement channel when the control state requires it. Its 60 ohm on-resistance provides a defined insertion resistance, while 100 ns turn-on and 150 ns turn-off timing support fast control sequencing. The 8-pin uMAX package also keeps the routing stage compact in handheld or portable measurement equipment.

🖥️

Precision Test and Measurement Inputs

The MAX324CUA+ can route precision test signals by placing its two 1:1 channels between an instrumentation amplifier or converter and selected external inputs. The 60 ohm on-resistance is a useful design parameter when calculating source loading, and the 100 ns turn-on time is suitable for controlled measurement sequences. Because the channels are normally closed, the circuit must account for the connection present before the control input changes, avoiding unintended measurement paths during setup.

🏭

Industrial Control Signal Selection

The MAX324CUA+ is suitable for industrial control boards that need to select analog command or feedback signals with a compact dual switch. Its single-supply 2.7V to 16V operating range supports both low-voltage logic and wider analog rails. The two independent channels provide 1:1 routing, while the 60 ohm on-resistance and sub-microsecond switching timing help preserve control integrity. Designers should account for the 0°C to 70°C commercial temperature range when positioning the device within an industrial enclosure.

💊

Medical Monitoring Signal Switching

The MAX324CUA+ can support low-bandwidth signal selection in medical monitoring equipment when a compact, normally closed analog switch is appropriate. Two 1:1 channels permit controlled routing of sensor or conditioning-stage signals, and the 60 ohm on-resistance helps engineers evaluate loading into downstream circuitry. The 100 ns turn-on and 150 ns turn-off times provide defined switching behavior. Medical designs should verify their own safety, isolation, and environmental requirements in addition to the device specifications.

📱

Portable Instrument Signal Isolation

The MAX324CUA+ fits portable instruments that require analog paths to remain connected in a defined inactive state. Its normally closed SPST configuration can isolate or reconnect a signal through control logic, while the 1:1 architecture introduces no intentional gain or scaling. Operation from 2.7V to 16V permits use with compact mixed-voltage systems, and the 8-pin uMAX package limits board area. Layout should keep sensitive analog traces short and separate control routing from the signal nodes.

📊

Data Acquisition Front-End Switching

The MAX324CUA+ can connect selected analog inputs to a data-acquisition front end when one dual switch is sufficient. The 60 ohm on-resistance is the principal loading parameter to include in source-impedance calculations, while the 100 ns and 150 ns transition times establish the basic control timing. Because both channels are normally closed, firmware and hardware sequencing should avoid assuming an open circuit before the switch is actively commanded. The compact uMAX package leaves room for the converter and conditioning circuitry.

推薦產品摘要

MAX324EUA+ Package-compatible related analog switch 用於: Battery-Powered Sensor Signal Routing, Precision Test and Measurement Inputs, Industrial Control Signal Selection, Medical Monitoring Signal Switching, Portable Instrument Signal Isolation, Data Acquisition Front-End Switching MAX324CUA+T Related uMAX-8 ordering designation 用於: Battery-Powered Sensor Signal Routing, Precision Test and Measurement Inputs, Industrial Control Signal Selection, Medical Monitoring Signal Switching, Portable Instrument Signal Isolation, Data Acquisition Front-End Switching
What is the MAX324CUA+?
The MAX324CUA+ is a dual, normally closed SPST analog switch from Maxim Integrated. It provides two 1:1 signal paths, 60 ohm on-resistance, 100 ns turn-on time, and 150 ns turn-off time in an 8-pin uMAX package. According to the manufacturer datasheet, it is intended for precision, single-supply analog switching.
What is the operating voltage range of MAX324CUA+?
The MAX324CUA+ operates from 2.7V to 16V on a single supply. The MAX323/MAX324/MAX325 family datasheet identifies the devices as precision single-supply analog switches, allowing the MAX324CUA+ to interface with low-voltage control logic and higher-voltage analog signal rails.
Is the MAX324CUA+ normally open or normally closed?
The MAX324CUA+ contains two normally closed switches, so each signal path is connected in its inactive state. This behavior differentiates it from the normally open MAX323 family. The MAX323/MAX324/MAX325 datasheet identifies the MAX324 as the dual normally closed member of the series.
Where can I download the MAX324CUA+ datasheet PDF?
The MAX324CUA+ datasheet PDF can be obtained from the Maxim Integrated MAX323/MAX324/MAX325 family documentation or the product link on this page. Use the pin-description table and switch timing diagrams in the manufacturer datasheet when assigning PCB tracks and validating control sequences.
Where can I find the MAX324CUA+ pinout?
The MAX324CUA+ pinout is defined in the manufacturer MAX323/MAX324/MAX325 datasheet and follows the 8-pin uMAX layout. Use that pin-description table when identifying the two switch terminals, supply, ground, control input, and control-status output for the exact ordering variant.
What are the key specifications engineers should know about MAX324CUA+?
The principal MAX324CUA+ specifications are two normally closed SPST switches, 60 ohm on-resistance, a 2.7V to 16V single-supply range, and 100 ns and 150 ns turn-on and turn-off times. The commercial-temperature device is packaged in an 8-pin uMAX package, according to the MAX323/MAX324/MAX325 family datasheet.
How does MAX324CUA+ differ from MAX323CUA+?
The MAX324CUA+ has two normally closed switches, whereas the MAX323 family uses two normally open switches. The functional difference is therefore the inactive-state signal path rather than the general precision SPST architecture. Confirm the required default connection before treating the two families as interchangeable.
Can MAX324EUA+ replace MAX324CUA+?
The MAX324EUA+ is the closest package-compatible replacement identified for the MAX324CUA+. A component comparison describes the MAX324EUA+ as a uMAX-8 part with matching terminals, package, and principal functional characteristics. Review the manufacturer ordering information for temperature-grade requirements before finalizing the substitution.
What can replace the MAX324CUA+ in an existing design?
The MAX324EUA+ is a documented uMAX-8 alternative with matching terminals and package, while the MAX324CUA+T provides the same functional family in a different orderable packaging designation. The strongest same-footprint option is the MAX324EUA+, subject to checking its temperature grade and control-state requirements.
When should I choose MAX324CUA+ over MAX324EUA+?
Choose the MAX324CUA+ when the commercial 0°C to 70°C operating range matches the product environment and the design requires normally closed SPST routing. Choose the MAX324EUA+ when the PCB footprint is unchanged but a broader temperature-grade option is preferred. Both use the uMAX-8 package and the same core switch function.
Is MAX324CUA+ suitable for sensor signal routing?
The MAX324CUA+ is suitable for low-rate sensor routing when the signal can be switched with 60 ohm on-resistance and 100 ns to 150 ns transition times. Its two normally closed channels can select or isolate analog inputs in instrumentation and measurement systems while keeping the control function separate from the analog path.
What design considerations matter for a MAX324CUA+ circuit?
The MAX324CUA+ design should account for its normally closed default connection, 60 ohm on-resistance, and 100 ns turn-on and 150 ns turn-off behavior. According to the family datasheet, the device is designed for single-supply operation from 2.7V to 16V. Route analog paths directly, isolate control traces, and use the pin table to verify the status-output function.
Where can I buy MAX324CUA+ and check its lead time?
Use the Request a Quote form on this page to request MAX324CUA+ availability, current lead time, and order quantities. The form keeps the request tied to the exact MAX324CUA+ ordering code and its 8-pin uMAX package, allowing procurement to confirm supply without substituting a different suffix.
Is MAX324CUA+ in stock?
Current stock for MAX324CUA+ should be confirmed through the Request a Quote form on this page. Submit the required quantity and packaging information so procurement can verify current component availability for the exact MAX324CUA+ ordering code rather than a related MAX324 variant.
Is MAX324CUA+ RoHS compliant?
The MAX324CUA+ is identified as RoHS compliant in the product specifications. REACH qualification, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status are not established by the listed product information, so those categories should be confirmed with the manufacturer before regulatory approval.

工程參考資料,適用於 MAX324CUA+ — 比較、設計指引及合規資訊。

選型指南

Choose the MAX324CUA+ when the design requires two normally closed SPST analog paths, 60 ohm on-resistance, and operation from 2.7V to 16V in an 8-pin uMAX package. It is particularly appropriate when the required inactive state is a connected signal path and the product environment remains within 0°C to 70°C. The MAX324EUA+ is the closest package-compatible option when an alternative temperature-grade ordering designation is preferable; its package, terminals, and core dual normally closed function align with the target. Avoid choosing a normally open MAX323-family part when the circuit depends on a closed default path. Before substitution, verify the exact pin functions, supply requirements, switch timing, and application-level signal-loading requirements against the manufacturer datasheet. For new designs, also confirm the current lifecycle and procurement status through the Request a Quote form rather than assuming that a related ordering code has identical supply.

與替代品比較

參數 本產品 MAX324EUA+
Package 8-pin uMAX 8-pin uMAX
Brand Maxim Integrated Maxim Integrated
Number of Switches 2 circuits 2 circuits
Switch Configuration Dual SPST, 1:1 Dual SPST, 1:1
Default Contact State Normally closed Normally closed
On-Resistance 60 ohm 60 ohm
Supply Voltage Range 2.7V to 16V 2.7V to 16V
Turn-On Time 100 ns 100 ns
Turn-Off Time 150 ns 150 ns

主要差異化特點

  • Defined normally closed signal paths (對比MAX324EUA+)
  • Compact dual-channel integration (對比MAX324EUA+)
  • Single-supply operating range (對比MAX324EUA+)

設計說明

Account for the MAX324CUA+ 60 ohm on-resistance when calculating the loading seen by the switched signal source. For high-impedance sensors, compare that resistance with the input impedance of the receiving amplifier and include the source impedance in the complete divider. The normally closed 1:1 paths mean the selected signal may be connected before the control input changes.

Place the MAX324CUA+ close to the switched signal nodes and keep each analog path short and continuous. Route the control input and status output away from sensitive analog traces to reduce coupling into the switched channels. Use the manufacturer pin-description table to confirm terminal orientation, because the package is only 8 pins and an incorrect connection can create a permanent signal path.

Do not treat the MAX324CUA+ as a normally open switch: its two channels are normally closed. Check the required power-off connection and system behavior before using the part for safety isolation, reset routing, or signal selection. Also observe the 2.7V to 16V supply range and the 0°C to 70°C commercial temperature specification during qualification.

Decouple the single supply near the MAX324CUA+ with the capacitance recommended by the manufacturer family documentation and keep the return path continuous to the device ground pin. Because this is an analog switch rather than a voltage regulator, supply bypassing does not replace careful signal-path design; control transitions and shared supply impedance can still affect analog behavior.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS compliance is identified for MAX324CUA+. The product is an analog switch IC and is not identified as an AEC-Q100-qualified automotive device. Other compliance attributes require manufacturer confirmation.

資料驗證日期: 2026-11-18 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MAX324CUA+ datasheet MAX324CUA+ datasheet pdf MAX324CUA+ pinout MAX324CUA+ specifications Maxim Integrated MAX324CUA+ MAX324CUA+ equivalent MAX324CUA+ replacement MAX324CUA+ vs MAX324EUA+ MAX324CUA+ uMAX-8 footprint MAX324CUA+ price MAX324CUA+ stock MAX324CUA+ analog switch application

相關元件與詞彙

Maxim Integrated MAX324CUA+ MAX324EUA+ MAX324CUA+T MAX323/MAX324/MAX325 analog switch SPST switch normally closed switch precision analog switch interface IC semiconductor single-supply operation on-resistance turn-on time turn-off time signal routing uMAX-8 uMAX package surface-mount package RoHS REACH AEC-Q100
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情