MC14053BF - Triple SPDT Analog Multiplexer | onsemi
MPN: MC14053BF ✓ 啟用中MC14053BF 概覽
An analog multiplexer is an interface IC that connects multiple signal sources to a shared processing channel. The MC14053BF belongs to the broader multiplexer and demultiplexer hierarchy, which sits within analog switches, interface ICs, and semiconductor signal-routing components. Unlike a mechanical selector, its CMOS switching elements are controlled by logic levels, allowing compact and repeatable signal selection.
Key features include three 2:1 switching paths, a 3 V to 18 V analog operating range, and a typical on-state resistance of 280 ohms. The onsemi product information also identifies a pin-for-pin replacement relationship with the CD4053 function and a typical low-noise figure of 12 nV per square root hertz at frequencies up to 1 kHz. Lead-free packages are offered, making package selection important for environmentally conscious production programs.
Internally, the MC14053BF uses complementary analog switches to select between paired inputs for each channel. Address logic determines the active throw, while the inhibit input provides a common control path for disabling the selected channels. Designers must maintain valid logic levels across the full supply range and account for off-state leakage, switching transients, charge injection, and the finite 280-ohm path resistance when setting source and measurement impedances.
Typical applications include multiplexed sensor acquisition, audio routing, industrial control interfaces, communication equipment, and laboratory test systems. It is particularly useful when several low-frequency or moderate-bandwidth analog signals must share one amplifier, converter, or measurement channel. Its 280-ohm resistance can create source-loading error when driving a high-impedance amplifier or a comparatively low-impedance ADC input.
A key design practice is to place the multiplexer close to the signal source, use high-impedance buffering where necessary, and validate the complete acquisition path for settling time and crosstalk. The data-select and inhibit traces should remain short and away from noisy clock or power-conversion nodes. Supply bypassing and return-current planning are also important because rapidly switching analog paths can inject transients into sensitive measurement circuitry.
This product record combines manufacturer feature data with practical guidance for multiplexing, signal integrity, PCB implementation, and replacement selection. It also distinguishes true pin-compatible options from functional alternatives so engineers can reuse an existing 16-pin layout without overlooking control-logic, package, or signal-integrity differences.
直接替換替代品,適用於 MC14053BF — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MC14053BF (相同外形與佔位) — 差異在於 Package, Mounting Type, On-State Resistance, Product Type, Switch Configuration.
MC14053BD
✅ 直接替換聯絡詢價
查看資料表 →MC14053BFG
✅ 直接替換📋 參考替代品(不在目錄中)
MC14053B
✅ 直接替換📋 參考替代品(不在目錄中)
NLV14053BDG
✅ 直接替換📋 參考替代品(不在目錄中)
MC14053BF 規格
| Multiplexer Configuration | Triple SPDT, 3 circuits |
| Switching Ratio | 2:1 per circuit |
| Analog Voltage Range | 3.0 V to 18 V |
| On-State Resistance | 280 ohms typical |
| Low-Noise Characteristic | 12 nV/sqrt(Hz) typical at 1.0 kHz |
| 供應電壓 | 3 V to 18 V |
| 封裝 | 16-SOEIAJ |
| 腳位數 | 16 pins |
| 安裝類型 | Surface mount |
| Logic Level | CMOS-compatible |
| Switching Type | Single-pole double-throw analog switch |
| Input Function | Analog multiplexing and demultiplexing |
| Pin Compatibility | Pin-for-pin replacement for CD4053 function |
| High-Speed Family Reference | HC4053 offered for lower on-state resistance |
| Lead-Free Packaging | Available |
MC14053BF 16-soeiaj 腳位配置指南
MC14053BF(16-soeiaj 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MC14053BF.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC14053BF 適用於 6 應用s: Multiplexed Sensor Acquisition, Industrial Control Signal Routing, Audio and Communication Routing, Test and Measurement Systems, Data Acquisition Front Ends, Automated Test Equipment.
Multiplexed Sensor Acquisition
The MC14053BF is useful when several analog sensor outputs must share one amplifier, filter, or ADC channel. Its three independently addressed 2:1 paths can select paired sensor outputs without using a mechanical switch, while the 3 V to 18 V operating range supports conventional CMOS control systems. Keep the device close to the sensor source because the 280-ohm typical on-state resistance can load a high-impedance sensor. Add a buffer when the sensor output impedance is high, and verify that the ADC sample-and-hold capacitor has enough acquisition time after each address transition. The manufacturer lists a low-noise characteristic of 12 nV per square root hertz at 1 kHz, making the switch suitable for precision measurements when system noise and grounding are controlled.
推薦
Industrial Control Signal Routing
MC14053BF can route three pairs of control or feedback signals into a common analog processing channel in an industrial controller. The triple-SPDT arrangement is useful for selecting command, monitor, or calibration paths while logic address inputs direct the required pair. Its CMOS-compatible interface supports operation across the stated 3 V to 18 V range, allowing integration with industrial-level interface circuitry where appropriate. Account for the 280-ohm typical path resistance when driving a low-impedance input, and place the multiplexer near the source to minimize capacitive pickup. Add supply bypassing and maintain a compact ground return because switch transitions can couple into nearby measurement nodes. Validation should include worst-case settling, crosstalk, and behavior during inhibit transitions.
推薦
Audio and Communication Routing
The MC14053BF can select among paired audio or communication paths when a compact CMOS routing element is sufficient. Three separately addressed channels provide independent source selection, while the inhibit input offers a common control point for muting or test states. Because the on-state resistance is 280 ohms typical, source impedance and downstream loading must be checked before using the device with low-impedance audio circuitry. Short analog traces, a quiet reference return, and adequate bypassing help prevent switching transients from becoming audible. The manufacturer identifies a low-noise characteristic of 12 nV per square root hertz at 1 kHz, but system-level signal-to-noise ratio also depends on the selected source, amplifier, grounding, and surrounding clocking noise. Prototype the routing behavior with the intended source impedances.
推薦
Test and Measurement Systems
MC14053BF supports multiplexed test systems that compare or sample several related analog conditions through one measurement chain. Its three 2:1 channels can select DUT, reference, or calibration paths, reducing the number of discrete routing components required. The principal design constraint is the 280-ohm typical on-state resistance, which can create a divider with finite source impedance and contribute to measurement error. Use high-impedance input stages and verify settling time before capturing the first sample after switching. The documented 12 nV per square root hertz typical noise characteristic at 1 kHz supports low-noise measurement designs, but leakage, charge injection, and clock-edge coupling still require testing in the final layout.
推薦
Data Acquisition Front Ends
In a data-acquisition front end, MC14053BF can multiplex paired analog inputs before amplification and conversion. The 3 V to 18 V supply range allows operation in systems that already use CMOS control and signal-conditioning voltages. Select address levels that remain valid across the complete supply range, and account for the off-state leakage of the installed device when working with high-impedance sensors. For multiplexed high-resolution conversion, use a sufficiently long acquisition interval for the source resistance, switch resistance, and ADC input capacitance. Place the device near the input connector or sensor output, and keep the address bus away from sensitive analog nodes. This arrangement reduces trace length, pickup, and settling time.
推薦
Automated Test Equipment
MC14053BF is appropriate for automated test equipment that routes multiple low-frequency analog conditions through a shared measurement path. The three independent SPDT channels can connect paired DUT outputs, internal references, or calibration nodes, while the common inhibit function simplifies equipment initialization and safety states. Care should be taken with the 280-ohm typical on-state resistance because it adds to the source impedance seen by the measurement amplifier. Choose a high-impedance front end and specify the switch with low leakage when measuring high-impedance sources. Control transitions should occur outside the measurement window, and the PCB should include ground-plane continuity and local supply decoupling to minimize crosstalk during address changes.
推薦
推薦產品摘要
工程參考資料,適用於 MC14053BF — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC14053BD | MC14053BFG | MC14053B | NLV14053BDG | CD4053B |
|---|---|---|---|---|---|---|
| Package | 16-SOEIAJ | 16-SOEIAJ | 16-SOEIAJ | 16-SOEIAJ | 16-SOEIAJ | 16-SOEIAJ |
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | Texas Instruments |
| Multiplexer Configuration | Triple SPDT | Triple SPDT | Triple SPDT | Triple SPDT | Triple SPDT | Triple SPDT |
| Number of Circuits | 3 circuits | 3 circuits | 3 circuits | 3 circuits | 3 circuits | 3 circuits |
| Switching Ratio | 2:1 | 2:1 | 2:1 | 2:1 | 2:1 | 2:1 |
| Pin Compatibility | CD4053 pin-for-pin replacement function | Same MC14053B family | Same MC14053B family | Same MC14053B family | Listed as a complete replacement | Original CD4053 function |
主要差異化特點
- Direct CD4053 pin compatibility (對比CD4053B)
- Complete replacement listing (對比NLV14053BDG)
- Three-channel routing in one package (對比MC14051B)
設計說明
Treat the 280-ohm typical on-state resistance as part of the source impedance. With a 10-kohm source, the switch can create an approximately 2.7% divider when driving a high-impedance node; with a 1-kohm source, the error increases to approximately 21.9%. Use a nearby high-input-impedance buffer when the measurement or signal amplitude cannot tolerate this loading. These divider values are estimates based on the stated typical resistance.
Place the multiplexer close to the signal source and connect local supply bypassing directly to its supply and ground pins. Keep the address and inhibit traces away from sensitive analog inputs, and avoid routing them beneath an analog path unless a grounded guard or shielding strategy is used. Maintain a continuous return plane beneath the device so switching current does not share a long path with the measured signal.
Do not assume that the first ADC conversion after an address change is valid. Switching capacitance, source resistance, the 280-ohm typical path resistance, and ADC acquisition requirements combine to determine the required settling interval. Determine the complete acquisition time in the final circuit and sample only after it has elapsed. Also verify the logic thresholds across the actual 3 V to 18 V supply range.
合規資訊
The onsemi MC14053B product page states that lead-free packages are available. RoHS, REACH, halogen-free, and conflict-minerals status are not established for MC14053BF by the cited material.