onsemi

MC14053BF - Triple SPDT Analog Multiplexer | onsemi

部品番号: MC14053BF ✓ 生産中
3.0 V to 18 V Vdss 280 ohms typical Rds(on) 16-SOEIAJ Package HC4053 offered for lower on-state resistance Speed
MOQ: 1 |

MC14053BF 概要

The onsemi MC14053BF is a triple single-pole double-throw CMOS analog multiplexer with an operating supply range of 3 V to 18 V, an on-state resistance of 280 ohms, and a 16-SOEIAJ package. The device routes three independent analog signals through common digital address and inhibit-control inputs, making it suitable for instrumentation, data acquisition, communication, and test systems.

An analog multiplexer is an interface IC that connects multiple signal sources to a shared processing channel. The MC14053BF belongs to the broader multiplexer and demultiplexer hierarchy, which sits within analog switches, interface ICs, and semiconductor signal-routing components. Unlike a mechanical selector, its CMOS switching elements are controlled by logic levels, allowing compact and repeatable signal selection.

Key features include three 2:1 switching paths, a 3 V to 18 V analog operating range, and a typical on-state resistance of 280 ohms. The onsemi product information also identifies a pin-for-pin replacement relationship with the CD4053 function and a typical low-noise figure of 12 nV per square root hertz at frequencies up to 1 kHz. Lead-free packages are offered, making package selection important for environmentally conscious production programs.

Internally, the MC14053BF uses complementary analog switches to select between paired inputs for each channel. Address logic determines the active throw, while the inhibit input provides a common control path for disabling the selected channels. Designers must maintain valid logic levels across the full supply range and account for off-state leakage, switching transients, charge injection, and the finite 280-ohm path resistance when setting source and measurement impedances.

Typical applications include multiplexed sensor acquisition, audio routing, industrial control interfaces, communication equipment, and laboratory test systems. It is particularly useful when several low-frequency or moderate-bandwidth analog signals must share one amplifier, converter, or measurement channel. Its 280-ohm resistance can create source-loading error when driving a high-impedance amplifier or a comparatively low-impedance ADC input.

A key design practice is to place the multiplexer close to the signal source, use high-impedance buffering where necessary, and validate the complete acquisition path for settling time and crosstalk. The data-select and inhibit traces should remain short and away from noisy clock or power-conversion nodes. Supply bypassing and return-current planning are also important because rapidly switching analog paths can inject transients into sensitive measurement circuitry.

This product record combines manufacturer feature data with practical guidance for multiplexing, signal integrity, PCB implementation, and replacement selection. It also distinguishes true pin-compatible options from functional alternatives so engineers can reuse an existing 16-pin layout without overlooking control-logic, package, or signal-integrity differences.

ドロップイン代替品: MC14053BF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MC14053BF (同一形状・フットプリント) — 相違点: Package, Mounting Type, On-State Resistance, Product Type, Switch Configuration.

Texas Instruments
Package: 16-pin PDIP
Mounting Type: Through-hole
Product Type: Triple 2:1 SPDT analog multiplexer/demultiplexer with logic-level conversion
比較対象 MC14053BF →
onsemi
Package: 16-SOIC
On-State Resistance: 280 ohm
Product Type: Triple 2:1 analog multiplexer/demultiplexer
比較対象 MC14053BF →

MC14053BD

✅ ドロップイン
onsemi
📦 16-SOEIAJ
Triple 2:1 analog multiplexer/demultiplexer · 3 circuits · 2:1 · 280 ohm · 3.0 V to 18 V · VEE must be less than or equal to VSS · 12 nV/sqrt(Cycle) at f <= 1.0 kHz · 16-SOIC

価格はお問い合わせください

データシートを見る →

MC14053BFG

✅ ドロップイン
📦 16-SOEIAJ
Same MC14053B 3 V to 18 V triple-SPDT function and 16-pin package; key electrical ratings are 0% different, while the orderable suffix differs.

📋 参考代替品(カタログ未掲載)

MC14053B

✅ ドロップイン
📦 16-SOEIAJ
Base MC14053B family member with the same 3 V to 18 V, triple-SPDT, 280-ohm typical on-resistance ratings and the same 16-pin package; key ratings are 0% different.

📋 参考代替品(カタログ未掲載)

NLV14053BDG

✅ ドロップイン
📦 16-SOEIAJ
Listed as a complete replacement with consistent terminals, package, and principal performance characteristics; key-rating difference is 0%.

📋 参考代替品(カタログ未掲載)

CD4053BE

✅ ドロップイン
Texas Instruments
📦 16-SOEIAJ
Triple 2:1 SPDT analog multiplexer/demultiplexer with logic-level conversion · 3 circuits · 2:1 SPDT per channel · 20 V · 240 ohm · Supported · -55 °C to +125 °C · 16-pin PDIP

価格はお問い合わせください

データシートを見る →

MC14053BF 仕様

Multiplexer Configuration Triple SPDT, 3 circuits
Switching Ratio 2:1 per circuit
Analog Voltage Range 3.0 V to 18 V
On-State Resistance 280 ohms typical
Low-Noise Characteristic 12 nV/sqrt(Hz) typical at 1.0 kHz
電源電圧 3 V to 18 V
パッケージ 16-SOEIAJ
ピン数 16 pins
実装タイプ Surface mount
Logic Level CMOS-compatible
Switching Type Single-pole double-throw analog switch
Input Function Analog multiplexing and demultiplexing
Pin Compatibility Pin-for-pin replacement for CD4053 function
High-Speed Family Reference HC4053 offered for lower on-state resistance
Lead-Free Packaging Available

MC14053BF 16-soeiaj ピン配置ガイド

MC14053BF (16-soeiaj パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MC14053BF の 16-soeiaj パッケージピン配置図

詳細なピン配置データはありません: MC14053BF.

詳細は データシート をご参照ください。

主な用途

MC14053BF の用途: 6 件s: Multiplexed Sensor Acquisition, Industrial Control Signal Routing, Audio and Communication Routing, Test and Measurement Systems, Data Acquisition Front Ends, Automated Test Equipment.

📡

Multiplexed Sensor Acquisition

The MC14053BF is useful when several analog sensor outputs must share one amplifier, filter, or ADC channel. Its three independently addressed 2:1 paths can select paired sensor outputs without using a mechanical switch, while the 3 V to 18 V operating range supports conventional CMOS control systems. Keep the device close to the sensor source because the 280-ohm typical on-state resistance can load a high-impedance sensor. Add a buffer when the sensor output impedance is high, and verify that the ADC sample-and-hold capacitor has enough acquisition time after each address transition. The manufacturer lists a low-noise characteristic of 12 nV per square root hertz at 1 kHz, making the switch suitable for precision measurements when system noise and grounding are controlled.

🏭

Industrial Control Signal Routing

MC14053BF can route three pairs of control or feedback signals into a common analog processing channel in an industrial controller. The triple-SPDT arrangement is useful for selecting command, monitor, or calibration paths while logic address inputs direct the required pair. Its CMOS-compatible interface supports operation across the stated 3 V to 18 V range, allowing integration with industrial-level interface circuitry where appropriate. Account for the 280-ohm typical path resistance when driving a low-impedance input, and place the multiplexer near the source to minimize capacitive pickup. Add supply bypassing and maintain a compact ground return because switch transitions can couple into nearby measurement nodes. Validation should include worst-case settling, crosstalk, and behavior during inhibit transitions.

🌐

Audio and Communication Routing

The MC14053BF can select among paired audio or communication paths when a compact CMOS routing element is sufficient. Three separately addressed channels provide independent source selection, while the inhibit input offers a common control point for muting or test states. Because the on-state resistance is 280 ohms typical, source impedance and downstream loading must be checked before using the device with low-impedance audio circuitry. Short analog traces, a quiet reference return, and adequate bypassing help prevent switching transients from becoming audible. The manufacturer identifies a low-noise characteristic of 12 nV per square root hertz at 1 kHz, but system-level signal-to-noise ratio also depends on the selected source, amplifier, grounding, and surrounding clocking noise. Prototype the routing behavior with the intended source impedances.

🖥️

Test and Measurement Systems

MC14053BF supports multiplexed test systems that compare or sample several related analog conditions through one measurement chain. Its three 2:1 channels can select DUT, reference, or calibration paths, reducing the number of discrete routing components required. The principal design constraint is the 280-ohm typical on-state resistance, which can create a divider with finite source impedance and contribute to measurement error. Use high-impedance input stages and verify settling time before capturing the first sample after switching. The documented 12 nV per square root hertz typical noise characteristic at 1 kHz supports low-noise measurement designs, but leakage, charge injection, and clock-edge coupling still require testing in the final layout.

📊

Data Acquisition Front Ends

In a data-acquisition front end, MC14053BF can multiplex paired analog inputs before amplification and conversion. The 3 V to 18 V supply range allows operation in systems that already use CMOS control and signal-conditioning voltages. Select address levels that remain valid across the complete supply range, and account for the off-state leakage of the installed device when working with high-impedance sensors. For multiplexed high-resolution conversion, use a sufficiently long acquisition interval for the source resistance, switch resistance, and ADC input capacitance. Place the device near the input connector or sensor output, and keep the address bus away from sensitive analog nodes. This arrangement reduces trace length, pickup, and settling time.

🧰

Automated Test Equipment

MC14053BF is appropriate for automated test equipment that routes multiple low-frequency analog conditions through a shared measurement path. The three independent SPDT channels can connect paired DUT outputs, internal references, or calibration nodes, while the common inhibit function simplifies equipment initialization and safety states. Care should be taken with the 280-ohm typical on-state resistance because it adds to the source impedance seen by the measurement amplifier. Choose a high-impedance front end and specify the switch with low leakage when measuring high-impedance sources. Control transitions should occur outside the measurement window, and the PCB should include ground-plane continuity and local supply decoupling to minimize crosstalk during address changes.

おすすめ製品の概要

MC14053BD onsemi 使用用途: Multiplexed Sensor Acquisition, Test and Measurement Systems MC14051B Related single-ended analog multiplexer family 使用用途: Multiplexed Sensor Acquisition, Audio and Communication Routing, Data Acquisition Front Ends MC14052B Related dual 4:1 analog multiplexer family 使用用途: Industrial Control Signal Routing, Test and Measurement Systems NLV14053BDG Pin-compatible alternate sourcing option 使用用途: Industrial Control Signal Routing, Automated Test Equipment CD4053B Pin-compatible CD4053-function option 使用用途: Audio and Communication Routing MC14053B Base same-family multiplexer 使用用途: Data Acquisition Front Ends MC14053BFG Same-family alternate orderable switch 使用用途: Automated Test Equipment
What is the MC14053BF?
The MC14053BF is an onsemi triple SPDT CMOS analog multiplexer with a 3 V to 18 V operating range, a typical on-state resistance of 280 ohms, and a 16-SOEIAJ package. According to the onsemi MC14053B product page, it provides three independently addressed 2:1 analog switching paths and can also perform demultiplexing. It is intended for routing analog signals in instrumentation, communication, data-acquisition, and test equipment.
What are the key specifications of MC14053BF that engineers should know?
The principal MC14053BF specifications are three SPDT channels, a 2:1 switching ratio, a 3 V to 18 V analog operating range, and 280-ohm typical on-state resistance. The onsemi product information also states a typical noise characteristic of 12 nV per square root hertz at 1 kHz and identifies the device as a pin-for-pin replacement for the CD4053 function. The MC14053BF is packaged in 16-SOEIAJ.
Where can I download the MC14053BF datasheet PDF?
The MC14053BF datasheet PDF is linked from the onsemi MC14053B product page at https://www.onsemi.com/products/standard-products/logic/analog-switches/mc14053b. The manufacturer page provides the primary electrical characteristics, application information, ordering details, and package information. Use that manufacturer document for final pin assignments, recommended operating conditions, and design-limit checks before releasing a production schematic.
Where can I find the MC14053BF pinout?
The MC14053BF pinout is identified in the pin-configuration section of the onsemi MC14053B datasheet and should be checked together with the package drawing. The device is a 16-pin analog multiplexer, so its address, inhibit, supply, common, and throw connections must be assigned exactly as shown for the selected 16-SOEIAJ orderable variant. Use the manufacturer pin-description table when assigning PCB nets.
What is the difference between MC14053BF and MC14053BD?
MC14053BF and MC14053BD belong to the same onsemi MC14053B triple-SPDT multiplexer family, but the final orderable suffix identifies a different package or ordering configuration. The cross-reference information identifies them as having consistent terminals and packages when compared as 16-pin SOIC-style devices. Confirm the exact suffix, lead orientation, and footprint against the onsemi ordering table before treating one as a board-level replacement.
Can NLV14053BDG replace MC14053BF on the same PCB?
The NLV14053BDG is identified as a complete replacement for MC14053BF because its terminal arrangement, package, and principal performance characteristics are consistent. It is therefore a relevant 16-pin drop-in candidate for boards using MC14053BF. Review the onsemi datasheet, NLV14053BDG datasheet, power rails, control thresholds, leakage, and switching timing before approving the substitution in safety- or precision-critical systems.
What is the best CD4053 replacement for MC14053BF?
The onsemi MC14053B product page identifies MC14053BF as a pin-for-pin replacement for the CD4053 function, making the MC14053 family the direct migration path for an existing CD4053-based circuit. Because package variants differ among CD4053 suppliers, verify the exact 16-pin footprint, pin numbering, control truth table, supply range, and electrical limits. The onsemi MC14053BF also lists 280-ohm typical on-state resistance.
MC14053BF vs MC14053BFG - which is better for a new 16-pin design?
MC14053BF and MC14053BFG are closely related onsemi MC14053B orderable versions with consistent terminals and package information according to the available cross-reference listing. The selection should therefore focus on the exact suffix, ordering code, lifecycle status, and environmental requirements rather than a functional difference in the triple-SPDT circuit. Verify the current onsemi product and ordering tables before releasing the BOM.
When should I choose MC14053BF over an HC4053 device?
Choose MC14053BF when a 280-ohm typical on-state resistance, low-noise behavior, and the 3 V to 18 V CMOS operating range are suitable for the application. The onsemi product information recommends the HC4051, HC4052, or HC4053 high-speed CMOS family when lower on-state resistance is required. The higher-resistance path may be adequate for high-impedance instrumentation but can create measurable loading error with lower-impedance sources.
Is MC14053BF suitable for multiplexed sensor acquisition?
Yes, MC14053BF is suitable for many multiplexed sensor-acquisition circuits when signal bandwidth and impedance are compatible with its 280-ohm typical on-state resistance. Place the device close to the sensor source, use a high-input-impedance buffer when needed, and verify settling time before the next conversion. A low-noise characteristic of 12 nV per square root hertz at 1 kHz also supports measurement-oriented designs.
How much does the MC14053BF cost?
The current unit price for MC14053BF depends on quantity, package suffix, market conditions, and current supplier availability. Use the Request a Quote form on this page to request a current quotation for the exact MC14053BF orderable part number and required quantities. The form is the appropriate route for obtaining price, stock confirmation, and lead-time information without relying on a potentially stale figure.
Where can I buy MC14053BF online?
Use the Request a Quote form on this page to request MC14053BF pricing, availability, and lead time for the exact 16-SOEIAJ configuration. The request should state the required quantity, target date, shipment location, and whether reels, tubes, or another approved delivery format are needed. This approach lets procurement confirm the current orderable manufacturer part rather than assuming that every MC14053B suffix is interchangeable.
Is MC14053BF in stock, and what is its lead time?
MC14053BF inventory and lead time can change with order volume and manufacturing conditions, so current availability should be confirmed through the Request a Quote form on this page. Include the annual usage, forecast quantities, packaging preference, and required delivery date in the request. The manufacturer currently presents the MC14053B family as a product, but the exact suffix and supply status should be reconfirmed before a build is scheduled.
What can replace MC14053BF?
The best-supported replacement candidates are the onsemi MC14053BD and MC14053BFG variants and the NLV14053BDG, whose listed terminals and package are consistent with MC14053BF. The CD4053 function also has a documented pin-for-pin relationship, but the exact package suffix must be confirmed. No replacement should be approved until its control truth table, supply limits, leakage, timing, and footprint have been reviewed.
Is MC14053BF the same as NLV14053BDG?
MC14053BF and NLV14053BDG implement the same triple 2:1 analog-multiplexing function and are identified as fully replaceable because their terminals and packages are consistent. They are not necessarily identical in every secondary characteristic, so a formal design review should compare voltage ratings, on-resistance, leakage, switching time, power consumption, and environmental qualification. The 16-pin footprint and pin behavior are the primary replacement criteria.
How should I design the PCB layout for MC14053BF?
Place MC14053BF close to the multiplexed signal source, keep the analog routes short, and separate address and inhibit traces from sensitive analog inputs. Connect supply bypassing near the device and provide a low-impedance return path to reduce switching transients. For high-frequency or high-impedance signals, use shielding or guarding where appropriate and verify crosstalk, charge injection, settling, and source-loading in the assembled prototype.

エンジニアリング参考データ: MC14053BF — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MC14053BF when the design needs three independently addressed 2:1 analog paths, a 3 V to 18 V operating range, and a 16-SOEIAJ footprint. It is a practical choice for sensor acquisition, signal routing, and test systems when the source impedance is high enough that the 280-ohm typical on-state resistance causes acceptable loading. Select MC14053BD or MC14053BFG when an onsemi orderable suffix or sourcing configuration better fits the BOM and qualification process. NLV14053BDG is relevant when the listed complete-replacement relationship is useful, provided leakage, timing, and environmental details are reviewed. CD4053B represents the referenced CD4053 function, but its suffix-level ratings and package details must be checked. For designs requiring substantially lower on-state resistance, onsemi identifies the HC4053 family as the lower-resistance option. In every case, validate source loading, settling time, logic thresholds, leakage, and analog-channel isolation on the assembled board.

代替品との比較

パラメータ この製品 MC14053BD MC14053BFG MC14053B NLV14053BDG CD4053B
Package 16-SOEIAJ 16-SOEIAJ 16-SOEIAJ 16-SOEIAJ 16-SOEIAJ 16-SOEIAJ
Brand onsemi onsemi onsemi onsemi onsemi Texas Instruments
Multiplexer Configuration Triple SPDT Triple SPDT Triple SPDT Triple SPDT Triple SPDT Triple SPDT
Number of Circuits 3 circuits 3 circuits 3 circuits 3 circuits 3 circuits 3 circuits
Switching Ratio 2:1 2:1 2:1 2:1 2:1 2:1
Pin Compatibility CD4053 pin-for-pin replacement function Same MC14053B family Same MC14053B family Same MC14053B family Listed as a complete replacement Original CD4053 function

主な差別化要因

  • Direct CD4053 pin compatibility (vs CD4053B)
  • Complete replacement listing (vs NLV14053BDG)
  • Three-channel routing in one package (vs MC14051B)

設計ノート

Treat the 280-ohm typical on-state resistance as part of the source impedance. With a 10-kohm source, the switch can create an approximately 2.7% divider when driving a high-impedance node; with a 1-kohm source, the error increases to approximately 21.9%. Use a nearby high-input-impedance buffer when the measurement or signal amplitude cannot tolerate this loading. These divider values are estimates based on the stated typical resistance.

Place the multiplexer close to the signal source and connect local supply bypassing directly to its supply and ground pins. Keep the address and inhibit traces away from sensitive analog inputs, and avoid routing them beneath an analog path unless a grounded guard or shielding strategy is used. Maintain a continuous return plane beneath the device so switching current does not share a long path with the measured signal.

Do not assume that the first ADC conversion after an address change is valid. Switching capacitance, source resistance, the 280-ohm typical path resistance, and ADC acquisition requirements combine to determine the required settling interval. Determine the complete acquisition time in the final circuit and sample only after it has elapsed. Also verify the logic thresholds across the actual 3 V to 18 V supply range.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The onsemi MC14053B product page states that lead-free packages are available. RoHS, REACH, halogen-free, and conflict-minerals status are not established for MC14053BF by the cited material.

データ検証日: 2026-11-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MC14053BF datasheet MC14053BF pinout MC14053BF datasheet pdf MC14053BF equivalent MC14053BF replacement MC14053BF cross reference MC14053BF vs NLV14053BDG MC14053BF price MC14053BF stock onsemi MC14053BF MC14053BF 16-SOEIAJ MC14053BF analog multiplexer application

関連部品&用語

onsemi MC14053BF MC14053B MC14053BD MC14053BFG NLV14053BDG CD4053B analog multiplexer analog switch multiplexer and demultiplexer interface IC triple SPDT 2:1 switching ratio on-state resistance 280 ohms analog voltage range 3 V to 18 V CMOS low-noise characteristic 12 nV/sqrt(Hz) 16-SOEIAJ surface mount signal routing sensor acquisition Pb-free
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示