MC14516BD - 3-18V Binary Up/Down Counter | onsemi
MPN: MC14516BD ✗ 停產MC14516BD 概覽
A binary up/down counter is a digital logic component that increments or decrements a four-bit numerical state according to direction-control and clock inputs. It belongs to the counter and arithmetic-function hierarchy within CMOS logic ICs. The MC14516BD is useful when a digital system must track a sequence in either direction, such as positioning, timing, indexing, or state progression, while retaining the familiar parallel binary-counter interface.
Key features include a 3.0 Vdc to 18 Vdc supply range, internal synchronous operation for high-speed counting, and diode protection on every input. These characteristics make the device appropriate for general-purpose digital control, clocked sequencing, and count-direction control. The 16-SOIC package is a surface-mount format that supports conventional reflow assembly and PCB routing without requiring a through-hole footprint.
The counter uses MOS P-channel and N-channel enhancement-mode devices in a monolithic implementation. Its internal synchronous operation provides coordinated state transitions when the clock advances the count. Direction control determines whether the binary output increments or decrements, allowing two counting behaviors to share one counter block. The manufacturer describes the circuit as a binary up/down counter and identifies all inputs as protected by diodes.
Typical applications include digital position and step tracking, programmable event counters, industrial sequencing logic, instrumentation timers, and control systems that need a reversible binary count. In these systems, the synchronous counter can be clocked from a defined timing source while external control logic selects count direction or clears the state. The broad 3.0 Vdc to 18 Vdc supply range accommodates both low-voltage CMOS logic and higher-voltage industrial interface environments.
Designers should use the manufacturer pin-description and connection diagrams when assigning PCB nets and should not infer inactive or reserved pins from abbreviated online descriptions. Input transitions, clock timing, reset behavior, and output-state requirements must be verified against the MC14516BD datasheet before high-speed operation. Decoupling practice should also follow the voltage rails used in the final system and the manufacturer application guidance.
This product page consolidates the verified device identity, supply range, synchronous-counter construction, protected-input feature, package information, source links, and same-footprint family alternatives. It also provides application guidance and engineering checks that support faster part selection without replacing the complete manufacturer datasheet.
直接替換替代品,適用於 MC14516BD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
MC14516BFG
✅ 直接替換📋 參考替代品(不在目錄中)
MC14516BDR2
✅ 直接替換📋 參考替代品(不在目錄中)
MC14516BDR2G
✅ 直接替換📋 參考替代品(不在目錄中)
MC14516BDG
✅ 直接替換📋 參考替代品(不在目錄中)
MC14516B
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MC14516BD 最大額定值與電氣特性
| Product Type | 4-bit synchronous binary up/down counter |
| Supply Voltage Range | 3.0 Vdc to 18 Vdc |
| Counter Architecture | Internally synchronous |
| Transistor Technology | MOS P-channel and N-channel enhancement-mode devices |
| Input Protection | Diode protection on all inputs |
| 封裝 | 16-SOIC, 0.154 inch body width |
| Package Length | 3.90 mm |
| 安裝類型 | Surface mount |
| Logic Family | CMOS binary up/down counter |
| Counting Mode | Binary up/down |
| 腳位數 | 16 pins |
MC14516BD 3.90 mm 腳位配置指南
MC14516BD(3.90 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: MC14516BD.
請參閱 資料表 以查看完整腳位配置。
典型應用
MC14516BD 適用於 6 應用s: Digital Position and Step Tracking, Programmable Event Counter, Industrial Sequencing Control, Instrumentation Timing and Indexing, Bidirectional Control-State Generator, Digital Up/Down Cycle Control.
Digital Position and Step Tracking
The MC14516BD fits a reversible position-counting block because it provides a binary up/down counter with internally synchronous operation across a 3.0 Vdc to 18 Vdc supply range. External control logic can select increment or decrement operation while a position sensor or step pulse advances the clock. The synchronous architecture keeps the binary state transitions coordinated, while diode protection on all inputs adds robustness around external control signals. Use the manufacturer pin-description and timing diagrams to define clock, direction, and reset behavior, and verify that the selected output count range matches the mechanical or electronic travel of the target system.
推薦
Programmable Event Counter
A programmable event system can use the MC14516BD to maintain a binary sequence count while direction logic determines whether accepted events should increase or decrease the state. Its 3.0 Vdc to 18 Vdc operating range allows deployment across multiple CMOS supply environments, and the internally synchronous counting architecture supports predictable clocked state changes. The MC14516BD is appropriate when the design needs a compact dedicated counter rather than general processor I/O. Confirm pulse-width limits, output-drive capability, and reset timing from the manufacturer datasheet before connecting sensors or long digital interconnects.
推薦
Industrial Sequencing Control
The MC14516BD can form the state-counting element of an industrial sequencing controller that advances through numbered phases or reverses when a process direction changes. Its 3.0 Vdc to 18 Vdc supply range supports integration with conventional CMOS control logic, while synchronous internal operation suits clocked state management. Direction-control logic can select upward or downward counting, while a reset path establishes the initial state. The design should provide stable clocking, define unused inputs according to the datasheet, and include appropriate supply decoupling and input conditioning for factory-environment noise.
推薦
Instrumentation Timing and Indexing
In timing and indexing instruments, the MC14516BD can count clock intervals or position indices in either direction. The 4-bit binary format provides a compact state representation, while the internally synchronous counter architecture supports coordinated transitions on each accepted clock event. Its broad 3.0 Vdc to 18 Vdc supply range allows the counter to operate beside different CMOS logic families. For measurement systems, use a clean reference clock and isolate long sensor lines from the counter inputs. Validate timing margins, output rise and fall behavior, and system-level error budget before using the count value for a precision measurement.
推薦
Bidirectional Control-State Generator
The MC14516BD can implement a compact bidirectional state generator for control systems that must move forward or backward through a sequence. Setting the direction control selects whether the binary state increments or decrements, and the internal synchronous design coordinates the counter stages. Operation across 3.0 Vdc to 18 Vdc provides flexibility when combining the counter with multiple CMOS circuit groups. Decode the binary outputs to create phase commands, but account for decoder transition timing when multiple outputs can change after a clock edge. The complete MC14516B datasheet should govern output timing, supply limits, and unused-pin treatment.
推薦
Digital Up/Down Cycle Control
A reversible cycle counter using the MC14516BD can alternate between increasing and decreasing counts under a direction-control signal. This arrangement suits process controllers, test systems, and mechanism controls that require repeatable forward and reverse counting. The MC14516BD's internally synchronous operation and 3.0 Vdc to 18 Vdc supply range support digital implementation across common CMOS voltage levels. Diode protection on all inputs is useful for control-signal interfaces, although the designer must still prevent excessive voltage, current, or inappropriate transitions. Confirm clock-edge behavior and counter-state limits before applying the outputs to external equipment.
推薦
工程參考資料,適用於 MC14516BD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MC14516BFG | MC14516BDR2 | MC14516BDR2G | MC14516BDG | MC14516B |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | onsemi | onsemi | onsemi |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Product Type | Binary up/down counter | Binary up/down counter | Binary up/down counter | Binary up/down counter | Binary up/down counter | Binary up/down counter |
| Supply Voltage Range | 3.0 Vdc to 18 Vdc | 3.0 Vdc to 18 Vdc | 3.0 Vdc to 18 Vdc | 3.0 Vdc to 18 Vdc | 3.0 Vdc to 18 Vdc | 3.0 Vdc to 18 Vdc |
| Counting Architecture | Internally synchronous | Internally synchronous | Internally synchronous | Internally synchronous | Internally synchronous | Internally synchronous |
| Input Protection | Diode protection on all inputs | Diode protection on all inputs | Diode protection on all inputs | Diode protection on all inputs | Diode protection on all inputs | Diode protection on all inputs |
| Internal Device Construction | MOS P-channel and N-channel enhancement-mode devices | MOS P-channel and N-channel enhancement-mode devices | MOS P-channel and N-channel enhancement-mode devices | MOS P-channel and N-channel enhancement-mode devices | MOS P-channel and N-channel enhancement-mode devices | MOS P-channel and N-channel enhancement-mode devices |
| Pin Count | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins | 16 pins |
主要差異化特點
- Dedicated internally synchronous up/down counting function (對比MC14516B)
- Exact 16-SOIC order code for footprint-controlled procurement (對比MC14516BFG)
- Protected digital interface for reusable counter designs (對比MC14516BDR2)
設計說明
Route the clock, direction-control, reset, and four binary outputs according to the complete MC14516B pin-description table. Keep the 16-SOIC footprint mechanically compatible with the selected onsemi order code and verify pin 1 orientation on the PCB. For mixed-speed logic, terminate long external clock traces close to the receiving input and avoid routing the clock parallel to sensitive output or control lines.
Operate the MC14516BD only within its documented 3.0 Vdc to 18 Vdc supply range. Confirm that connected logic sources cannot exceed the absolute-maximum input limits under power-up, power-down, or fault conditions. Place the supply-decoupling network close to the device and return its ground path through a low-impedance plane, especially when the counter shares a board with switching converters.
Do not substitute a counter with the same function but a different pin arrangement without reviewing its pinout and truth table. Synchronous operation does not remove the need to respect clock pulse-width, rise-time, and setup requirements. Also avoid leaving control inputs floating; connect unused inputs to a defined valid level as directed by the manufacturer datasheet.
Keep the counter clock path short and provide a continuous ground reference beneath the device and associated logic. If the counter receives pulses from switches, sensors, or long cables, condition those signals before entering the protected inputs. The built-in diode protection should not be treated as a substitute for correct voltage limiting, debouncing, or isolation.
合規資訊
The available product information does not provide definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for MC14516BD. Compliance must be confirmed for the exact order code and current manufacturer documentation.